Repair of building of pumping station PS -III at km 63.300of Ch.k.R.A Lift canal.

Brick masonry (using well burnt clay bricks of size 230 x 110 x 70 mm, class designation 75 as per specification) up to plinth including all leads of all construction materials including curing etc. complete In cement sand mortar 1:5. (IGNP BSR 2023-24 Ch-VII, item 10-C) + Add extra if well burnt clay bricks (size 230x110x70 mm) class designation 100 as per specifications are to be used (IGNP BSR 2023-24 Ch-VII, item 14-a), (Comlete Rate - 5767.00 + 490.36 = 6257.36)

Plaster in cement sand mortar 1:5 including racking of joints, smooth finishing & curing etc. complete including all leads of all construction materials of thickness 12 mm (IGNP BSR 2023,Ch-VIII, item 3-b)

Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm. (IGNP BSR 2023-24 Ch-IX, item 8-d)

Renewing glass panes,with putty and nails wherever necessary Float glass panes of thickness 4 mm (PWD BUILDING BSR 2022 Ch.B-13 ITEM .No. 13.4.1))

Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding: Old work (One or more coats (PWD BUILDING BSR 2022 Ch B-12 item no.12.37.1)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer(PWD BSR ch B-12 item no.12.37.1

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :One or more coats on Old Work (PWD BUILDING BSR 2022 Ch.B-12 ITEM .No. 12.46.2)

Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.)With float glass panes of 8 mm thickness. (PWD BUILDING BSR- 2022 Ch B-16 item no. 16.5.3)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S.With brass cover plate. (PWD BUILDING BSR- 2022 Ch B-16 item no. 16.6.2)

Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.PWD BUILDING BSR- 2022 Ch B-16 item no. 16.8

Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide (PWD BUILDING BSR- 2022 Ch B-9 item no. 9.8)

Providing and fixing 1mm thick M.S. sheet garrage door shutters with frame of 40 x 40 x 6mm. angle iron 3mm M.S. gusset plates at the junction and corners including all fittings and applying a coat of approved steel primer : (Excluding cost of frames) Using M.S. angles 40 x 40 x 6mm for diagonal braces (PWD BUILDING BSR- 2022 Ch B-09 item no.9.12.1)

Float glass sheet of nominal thickness 8 mm (PWD BUILDING BSR- 2022Chapter input material CODE - 2408)

Printing new letters and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade English and Roman (Hyphens, commas and the like not to be measured and paid for).(PWD ROAD BSR 2023 HMH Ch.R-11 ITEM .No. 4.2)