Construction of Library, MBA and Mass Communication Deptt. Building in J.C. Bose University.

Amount

DSR ITEMS-2018:- Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.DSR-4.12 (LGF WORK ONLY)

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. DSR-4.17

Providing and fixing 15-18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, dado top, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. DSR-8.2 (BASIC RATE: RS. 130/sft ) (18 mm thick Granite of any colour and shade ) (DSR-8.2.2) Area of slab over 0.50 sqm (DSR-8.2.2.2)

Providing edge moulding to 15-18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.(DSR-8.3) Granite work (DSR-8.3.2)

Extra for fixing marble/ granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.(DSR-8.4)

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. (DSR-8.5)

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.(DSR-8.13). Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. (DSR-8.13.1) OR DSR 11.56

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approvel of Engineer-in-charge, (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (DSR-10.28)

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge .(DSR-21.18)-MAKE-Saint Gobain/modi

Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of :(I)Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement :3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. (II)2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions.(III) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.(DSR-22.1)

Using rough kota stone. DSR-22.1.1( LGF)

Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge : (DSR-22.2)

Using rough Kota stone (DSR-22.2.1)(LGF)

Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to be paid for separately). (DSR-9.136)

Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). (DSR-9.137)

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 60 minutes of fire resistance both integrity & radiation control (EW60) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm. (DSR-9.138)

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. (DSR-10.27)

10 x 120 mm (DSR-10.27.3)

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR-9.100)

125 mm (DSR-9.100.1)

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (DSR-9.101)

Twin rubber stopper (DSR-9.101.2)

Providing and fixing panic bar /latch (double point) fitted with a single body,trim latch & lock on back side of the panic latch of reputed brand and manufacturer to be approved by Engineer in charge, all complete. (DSR-9.139)

Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately).DSR 8.20.2

White sand stone - 30mm thick gang saw cut stone

Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part there of. DSR -8.19

Providing and fixing adjustable stainless steel cramps of approved quality,required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in-charge.DSR-8.22

Providing and fixing structural steel frame (for dry cladding with 30 mmthick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, weldingetc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and

shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineerin- charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid).DSR-8.21

PLUMBING:- PHE WORK: -Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. (DSR2018 -17.16 A)

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.( DSR2018-12.22)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1 .00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall ( DSR2018-18.7)

20 mm dia nominal outer dia pipes (DSR2018-18.7.2)

25 mm dia nominal outer dia pipes (DSR2018-18.7.3)

32 mm dia nominal outer dia pipes (DSR2018-18.7.4)

40 mm dia nominal outer dia pipes (DSR2018-18.7.5)

50 mm dia nominal outer dia pipes (DSR2018-18.7.6)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(DSR2018-18.8) Concealed work, including cutting chases and making good the walls etc.

15 mm dia nominal outer dia pipes (DSR2018-18.8.1)

20 mm dia nominal outer dia pipes (DSR2018-18.8.2)

25 mm dia nominal outer dia pipes (DSR2018-18.8.3)

32 mm dia nominal outer dia pipes (DSR2018-18.8.4)

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (DSR2018-18.12) External work

40 mm dia. nominal bore (DSR2018-18.12.5)

50 mm dia. nominal bore (DSR2018-18.12.6)

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR2018-18.17)

25 mm nominal bore (DSR2018-18.17.1)

20 mm nominal bore (18.17.1A DSR 2018)

32 mm nominal bore. (DSR2018-18.17.2)

40 mm nominal bore (DSR2018-18.17.3)

50 mm nominal bore. (DSR2018-18.17.4)

65 mm nominal bore. (DSR2018-18.17.5)

80 mm nominal bore (DSR2018-18.17.6)

Providing and fixing gun metal non- return valve of approved quality (screwed end) \(DSR2018-18.19)

50 mm nominal bore Horizontal (DSR2018-18.19.4.1)

80 mm nominal bore Horizontal (DSR2018-18.19.6.1)

Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :DSR2018-18.2 25mm nominal bore DSR2018-18.20.3

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/e necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : DSR2018-18.33 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (DSR2018-18.33.1)

Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality (DSR2018-18.4):

40 mm nominal bore (DSR2018-18.40.5)

50 mm nominal bore (DSR2018-18.40.6)

Providing and filling sand of grading zone V or coarser grade all-round the G.I. pipes in external work. (DSR2018-18.41)

40 mm nominal bore (DSR2018-18.41.5)

50 mm nominal bore (DSR2018-18.41.6)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (DSR2018-18.53.1) 15 mm nominal bore

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms and dewatering of sub-soil water, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : DSR2018-2.1

All kinds of soil : -Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. DSR2018-2.10.1.2

All kinds of soil : - Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm DSR2018-2.10.1.3

Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 meter). DSR2018-2.11 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.

Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 meter). DSR2018-2.11 Pipes, cables etc. exceeding 300 mm dia. but not exceeding 600 mm dia.

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : DSR2018-19.2

100 mm diameter S.W. pipe (DSR2018-19.2.1)

200 mm diameter S.W. pipe (DSR2018-19.2.3)

250 mm diameter S.W. pipe (DSR2018-19.2.4)

Constructing brick masonry manhole in cement mortar 1:4 ( 1cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :(DSR2018-19.7), Inside size 90x80 cm and 45 cm deep including 560 mm dia perforated SFRC manhole cover and frame (heavy duty) conforming to I.S 12592,HD 20 grade, total weight of cover and frame not to be less than 182 kg:(DSR2018-19.7.1), With common burnt clay F.P.S. (non modular)bricks of class designation 7.5 (DSR2018-19.7.1.1)

Inside size 120x90 cm and 90 cm deep including 560 mm dia perforated SFRC manhole cover and frame (heavy duty) conforming to I.S 12592,HD 20 grade, total weight of cover and frame not to be less than 182 kg: (DSR2018-19.7.2) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR2018-19.7.2.1)

Extra for depth for manholes :(DSR2018-19.8),:- Size 90x80 cm (DSR2018-19.8.1), With common burnt clay F.P.S. (non modular)bricks of class designation 7.5 (DSR2018-19.8.1.1 )

Size 120x90 cm (DSR2018-19.8.2)With common burnt clay F.P.S. (non modular)bricks of class designation 7.5 (DSR2018-19.8.2.1)

Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :(DSR2018-19.9) , 0.91 m deep with S.F.R.C. cover and frame (heavy duty,HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg., fixed in cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete.(Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) (DSR2018-19.9.1): With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR2018-19.9.1.1)

Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m to 1.67m (DSR2018-19.1),With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR2018- 19.10.1)

Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : (DSR2018-19.11),1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :(DSR2018-19.11.1) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR2018-19.11.1.1)

Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m :(DSR2018-19.12), With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR2018- 19.12.1)

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.(DSR2018-19.16)

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality(DSR2018-19.19), M D - 10 (DSR2018-19.19.2), Circular shape 500 mm internal diameter (DSR2018-19.19.2.2)

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : (DSR2018-19.21)

For pipes 100 to 250 mm diameter (DSR2018-19.21.1)

3 For pipes 350 to 450 mm diameter (DSR2018-19.21.3)

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C horizontal grating with frame complete as per standard design : (DSR2018-19.27), With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR2018-19.27.1)

Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness ('43.00/ DSR E 2018-4.1.4)

Constructing masonry chamber 90x90x100cm, inside 75 class designation brick work in cement mortar 1:5 (1 cement:5 fine sand) for sluice valve, with C.I. Surface box 100 mm. Top dia meter, 160 mm bottom dia meter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement:5 fine sand:10 graded stone aggregate 50 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement:3 coarse sand) 12 mm thick finished with a floating neat cement complete as per standard design. ('45.00/DSR 2018 18.34)

ELECTRICAL WORK:- SUB HEAD A - DSR ITEMS:- Cable Trays:- Supplying, fabricating and installing following size of perforated pre painted M.S. cable trays cross members with perforation not more than 17.5%, in convenient sections, joints with connectors, suspended from the ceiling with M.S. suspenders including bolt & nuts, painting suspenders as required.DSR-4.5.2

150 mm width X 50 mm depth X 1.6 mm thickness

Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete.DSR 14.12

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. DSR AND AOR ATTACHED

Ten Loop Panel.

Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.DSR 17.2.3

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. DSR17.2.4

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.DSR-17.2.5

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required DSR 17.2.9

Supplying, installation, testing & commissioning of addressable manual call point complete as required.DSR 17.2.14

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.DSR 17.2.15

Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required.DSR 17.2.17

Supplying, installation, testing & commissioning of fire fighter phone jack complete as required.DSR17.3

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required DSR 17.5.2

Networking:- Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

1 run of cable DSR 1.53.1

CCTV:- Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

1 run of cable DSR1.53.1

SUB HEAD B TOTAL EXTERNAL ELECTRICAL:- Cable laying:- Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.DSR-7.1

Above 35 sq. mm and upto 95 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe/existing open trence/as required.DSR-7.5

Upto 35 sq. mm

Above 35 sq. mm and upto 95 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface and overhead as required.DSR-7.7

Upto 35 sq. mm (clamped with 1mm thick saddle)

Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV.DSR-9.1

2 X 10 sq. mm (19mm)

3½ X 95 sq. mm (38mm)

4 X 10 sq. mm (25mm)

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required. DSR 14.14

100 mm dia

150 mm dia

Supplying and laying of following size DWC HDPE pipe ISI markedalong with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) includingexcavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.DSR-14.16

63 mm dia (OD-63 mm & ID-51 mm nominal)-DSR-14.16.1

CIVIL WORK NS ITEM:- Providing and fixing OZ-DST-55E Std SN Make Ozone Door Stopper Finish: Satin . of Ozone make or Dorma, dorset, Godrej with the Prior approval of Engineer-in-Charge. NS Item

Providing and Fixing OGH-11-25x325MM SSS Ozone make Glass Door Handle D Type Pull Handle With Back to Back installation on Glass/Wooden/Metals Doors.,In case of Wooden Exteneded Spindle would be provided on request.Gaskets to prevent the contact between glass and metal.,Supporting washer with raised bevelling on the outer surface,Grub screws kept out of sight,Material:-Stainless Steel Grade 304,Finish: Double Finish of PSS/SSS & Single Finish of SSS Ozone or Dorma, dorset, Godrej with the Prior approval of Engineer-in-Charge. NS Item

Providing and fixing OMC-22-K2K-N2-60MM Make Ozone. To Use with Motorise Locks for key to key application, Different lengths of 60mm, 70mm, 80mm and 100mm,Standard keys,Key accessible from both sides,For application on to different door thicknesses,Material: Brass, Finish: Gold/SSS etc. complete of OZONE make orDorma, dorset, Godrej or equivalent make as per prior approval of Engineer-in-Charge with necessary screws etc

Providing and fixing OZML-DL1 55MM SSS. Ozone Make Mortise Lock Body with Strike Plate. Gold/SSSetc.complete of OZONE make orDorma, dorset, Godrej or equivalent make as per prior approval of Engineer-in-Charge with necessary screws etc

Providing and fixing OZ-BH-2BB 4x3x3MM SSS Make Ozone Total height 4 inch (125mm) Total width 3 inch (75mm) Leaf thickness 3mm With 2 ball bearing Five countersunk attachment points on each leaf Designed for the smooth movement of the doors Material: Stainless Steel Grade: 304 Finish: SSS etc.complete of OZONE make orDorma, dorset, Godrej or equivalent make as per prior approval of Engineer-in-Charge with necessary screws etc

Providing and fixing NSK-980 TA SSS Make ozone Rack and Pinion Door Closer with Adjustable closing force EN 2-4,Fully hydraulically controlled adjustable closing speed in two, independent ranges (120°-15° and 15°-0°) Non handed design, With track arm (SS finish) Self regulating back check,Maximum door weight-80Kg,Maximum door width- 1100mm, 5 Lac Cycle Tested, UL tested, Test certificate available on request, Finish: Silver) etc.complete of OZONE make orDorma, dorset, Godrej or equivalent make as per prior approval of Engineer-in-Charge with necessary screws etc

Providing and fixing Ist quality ceramic glazed wall tiles in skirting, risers of steps and dado over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete.NITCO, KAJARIA, SOMANI, ORIENT, JOHNSONS & RAKor equivalent make as per prior approval of Engineer-in-Charge. (Basic cost 404.90 Rs./Sqm) a)Size of Tile 300 x 600mm. NS Item

Providing and fixing anti skid vitrified tiles of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note :- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT, JOHNSONS & RAK. (Basic cost 483.97 Rs./Sqm) NS Item Size of Tile1200x 600 mm.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, NS Item

including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, NS Item (POP False ceiling)(ONLY FLOOR AREA SHALL BE MEASURED FOR PAYMENT)

Flush door made as per IS 2202 (Part1):1999 from solid wood timbers, providing structural strenth and dimensional stability.Immune to termite and borers.The doors bonded with Phenol Formaldehehyde resin under High pressure makes them boiling water proof.Absolutely free from any biological agents.Available in post laminated.Merino BWP Laminated Flush Door in the Thickness of 35mm including 1mm Both side Laminate in Suede Finish.Make Merino/greenlam equivalent make as per prior approval of Engineer-in-Charge. NS Item

Item same as above Extra For Vision panel (200X1200) NS Item Make merino/greenlam equivalent make as per prior approval of Engineer-in-Charge.

Providing and fixing factory made Single Extruded WPC (wood polymer composite) solid door/ window/ ceosetory window. Frames/ chaukhat comprising of Virgin PVC polymer of K value 58-60 (suspension Grade) calcium carbonate along with natural Fibers (rice husk and wheat husk) along with non-toxic additives (maximum toxicity index of 12 in 100 grams). Having a density of 850 kg/cum, screw holding strength of 2200N (face) and 1100N (edge) minimum compressive strength of 58 N/mm2, Tensile strength of 11 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of class A category, Limiting Oxygen index of 39%, property of being Termite and Borer Proof, Water/Moisture proof, Fire Retardant. All Door and Window Frames should be GRIHA approved, lead free and asbestos free.Toilet- (Alstone/Relwood/Rajshree) equivalent make as per prior approval of Engineer-in-Charge.

Frame Size (mm):- 125X62

Providing, fabrication and erection of suitable m.s structure made of m.s section 50x50x3.2 main arches bended to suitable profile with purlins 40x80x2.6 welded together and fixed to r.c.c with necessary base plates, anchors fastners and also incl. one coat of red oxide primer and two coats of enamel paint with providing and fixing roofing with 10 mm. thick MULTICELL 2 U.V protected polycarbonate sheet of equivalent colour and profile formed to require curve as per the structure fixed to the purlins with necessary aluminium cleats as per the drawing, fitted with vertical standing seam along the width of the structure, snap on polycarbonate connector to interlock the panels concealed retention clips on both sides, polycarbonate end caps and aluminium U-profiles for ends. The joints of the sheets to be sealed with the silicone all complete as per direction of Engineer-in-charge. make as per prior approval of Engineer-in-Charge. Make-Pipe- Apollo tubes/Jindal Sheet-CoxWell/Carboron

Providing and fixing galvanized chicken wire mesh (24 gauge 12 mm size) to junctions of concrete and masonry work and other locations including cutting to required sizes, side laps of minimum 75 mm and fixing in position with galvanized iron wire nails, complete in all respect. NS ITEM make as per prior approval of Engineer-in-Charge.

Supplying and applying on surface, SPRAY FINISH to external/ internal wall surfaces comprising of silicon and ceramic based texture finish which is highly elastic and is abrasion & UV resistant with 4 or more coat system; highly water repellant, anti-algae & anti-fungal, heat reflective, fire resistant and low on VOC in nature. The coating covers minor hairline cracks with application method which includes 1 coat of Perma Polyunder (sealer coat) with roller/ brush/ spray, 1 coat of Acro Spray Finish in approved texture and thickness of 1-1.5 mm with spray gun, 2 or more coats of top coat in approved shade as top coat with roller/brush. The finish is colourfast, water repellant, resistant to condensate formation, cover hairline cracks/ crazing, UV & alkali resistant & ensure good breathability for the substrate. Make-ACRO/Asian-NS ITEM or equivalent make as per prior approval of Engineer-in-Charge.

Melamine polishing on wood work (one or more coat). ASAIN/ MRF/SIRCA OR equivalent make as per prior approval of Engineer-in-Charge.NS Item

Providing and laying Water proofing with tapecrete P-151 slurry over prepared concrete surface with fiber glass fabric on wet slurry and application with one coat of polymer modified cementatious brush topping and second coating of tapecrete -p-151 slurry coating complete all respect.NS ITEM Make-Cico/SIKA equivalent make as per prior approval of Engineer-in-Charge.

P.H.E NS ITEMS:- Providing and fixing first quality white vitreous china extended wall mounted European type water closet similar to "Hindware make Cat. No.20028 " with white vitreous china 3/6 Litres dual flushing cistern similar to "Hindware make Cat. No. 21038 " or approved equivalent make with holding down bolts, C.I. chair etc. with matching color solid plastic quiet close seat and cover, plastic outlet connector, rubber gasket with C.P. brass hinges and rubber buffers including cutting holes in brick masonry and R.C.C. and making good the walls and floors wherever required. make as per prior approval of Engineer-in-Charge. NS Item

Providing and fixing first quality Star white vitreous china flat back large Urinal similar to "Hindware Cat. No.60002" or approved equivalent make with angle valve with wall flange similar to "Jaquar make Cat. No. CON-CHR-059KN" or approved equivalent make, Concealed brackets painted with two or three coats of enamel paint of approved shade over a coat of primer, C. P. brass flush pipe with clamps/hooks, C.P. brass spreader H/T, 32 mm dia C.P. brass doom waste "Vijay make Cat. No. -1301 or approved equivalent" , 32 mm dia C.P. brass bottle trap and pipe upto wall with C.P. brass flange (Jaquar make ALD-CHR-769L 300x190 or approved equivalent) and rubber adopter for waste connection complete in all respects, including cutting holes in brick masonry and R.C.C. and making good the walls and floors wherever required. make as per prior approval of Engineer-in-Charge. NS Item

Providing and fixing first quality white vitreous china under counter wash basin size 560x450 mm similar to "Hindware Cat. No. 10049 "Zen" or approved equivalent make) with 32 mm dia CP brass waste (Jaquar make Cat. No. ALD-CHR-705L 130 or approved equivalent make), 32mm C.P. cast brass bottle trap and pipe to wall with C.P. brass wall flange (Jaquar make Cat. No. ALD-CHR-769L 300x190 or approved equivalent make) and rubber adopter for waste connection, CI/MS brackets with painting, including cutting and making good the walls where required complete in all resects as directed by Engineer in charge. NS Item

First quality white vitreous china under counter wash basin with 15mm dia C.P. brass self closing pillar cock similar to "Jaquar make Cat. No.PRS-CHR-031" or approved equivalent make. NS Item

Providing and fixing soap dispenser with metallic bottle similar to "Jaquar make Cat no. ACN-CHR-1137N" or approved equivalent make with S.S. screws and wooden cleats including necessary fittings cutting holes in wall and making good the wall wherever required complete as directed by Engineer in charge. NS Item

Providing and fixing matt finish S.S. hinged grating, 127mm dia with frame similar to "Jayna make Cat. no. RPG 127 including setting in floor with cement mortar 1:3 (1 cement : 3 coarse sand) including cutting and making good the floor wherever required complete as directed by Engineer in charge. NS Item

Providing and laying HDPE (PE) pipe PE-63 6kg/cm2 class III (IS:4984-1983) including injection molded fittings where required e.g. clean out plugs, tees, bends, couplings and adapters and jointing with adhesive approved by fittings manufactures including necessary MS clamps of 40mmx5mm thick flat, cutting chases holes in brick & R.C.C. walls and making good the same with cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished smooth. Earth work excavation & refilling etc. (for RWP and Sink Drain) make as per prior approval of Engineer-in-Charge.NS Item

40 mm dia

50 mm dia

110 mm dia

160 mm dia

Providing and fixing G.I. (heavy class) waste pipes(Jindal Hissar make or approved equivalent make) conforming to IS: 1239 and fittings(Zoloto make or approved equivalent make) with M.S. clamp/hook including cutting threads and jointing with white lead, cutting chases and holes in RCC/Brick wall/Ceilings and making good the same in cement mortar 1:3 ( 1 cement : 3 coarse sand ) to match with the surroundings for waste from wash basins, urinals, kitchen sink, pump deliveries and suction including painting of pipes, fittings and clamps etc complete as directed by Engineer in charge make as per prior approval of Engineer-in-Charge..NS Item

50mm dia nominal bore

80mm dia nominal bore

Providing, laying and jointing Nu-drain pipes confirming to IS 15328 including excavation, refilling, compacting and disposal of surplus earth complete in all respects. make as per prior approval of Engineer-in-Charge. NS Item

200 mm dia SN-4

Providing and fixing 9 mm thick VidoFlex Insulation on hot water pipe including one layer of chicken mesh complete in all respect. make as per prior approval of Engineer-in-Charge.NS Item

15 mm dia

20 mm dia

Providing and fixing M.S. pipe (Jindal Hissar make or approved equivalent) heavy duty sleeve 600 mm long, (threaded upto 65mm dia and flanged for 80 mm dia and above) on both sides and 6 mm thick M.S. plate 100 mm wide welded all-round the pipe, including making holes in the flanges complete as directed by Engineer in charge. make as per prior approval of Engineer-in-Charge.NS Item

40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

Providing and fixing 100 mm dia G.I. vent pipe (heavy class)(Jindal Hissar make or approved equivalent) 1 MTR. high hinged with brass mosquito proof grating elbow with fittings complete as directed by Engineer in charge.make as per prior approval of Engineer-in-Charge. NS Item

Providing and fixing handicapped Grab bar (Euronics make Cat no. EGR S02) or approved equivalent with S.S. screws and wooden cleats including necessary fittings and cutting holes in wall and making good the wall wherever required complete in all respects as directed by Engineer in charge. NS Item

Providing and fixing 15 mm dia C.P. brass sink wall mixer with swinging type casted spout with wall flange. (Make-Jaquar, Model CON-CHR-309KN or approved equivalent make) including cutting and making good the walls wherever required complete as directed by Engineer in charge. NS Item

Providing and fixing SWR (Class B) uPVC soill, waste and vent pipes conforming to IS 13592 including all fittings (plain or access door) e.g., clean out plugs, bends, junctions, cowls, offsets, access pieces etc., jointing with rubber ring joints, fixed with M.S. clamps painted with two or three coats enamel paint of approved shade over a coat of primer fixed in cement concrete 1:2:4 blocks including cutting holes in wall/floors and making good wherever required. NS Item 110 mm dia

Providing and fixing uPVC P or S deep seal type with self cleaning design floor/urinal trap including setting with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 hard stone ballast 20mm nominal size) including cutting and making good the floor/RCC and Brick wall wherever required, complete in all respects. NS Item 110x110mm outlet

Providing and fixing uPVC 110 mm dia, 150 mm high height riser with 2 sockets of 50/40 mm dia for connections waste from WB/sink including jointing the piece with floor trap on one end complete in all respects NS Item

Providing and fixing G.I. (medium class) pipes(Jindal Hissar make or approved equivalent make) conforming to IS: 1239 and all fittings including unions (Zoloto make or approved equivalent make) with M.S. clamp/hook including cutting threads and jointing with white lead, cutting chases and holes in RCC/Brick wall/Ceilings and making good the same in cement mortar 1:3 ( 1 cement : 3 coarse sand ) to match with the surroundings for water supply including painting of pipes, fittings and clamps etc complete as directed by Engineer in charge. (internal work) NS Item.

65 mm dia nominal bore

80mm dia nominal bore

Providing and fixing 15 mm dia C.P. brass towel ring square with round flange similar to "Jaquar make Cat. no. ACN-CHR-1121N" or approved equivalent make with S.S. screws and wooden cleats including necessary fittings cutting holes in wall and making good the wall wherever required complete as directed by Engineer in charge. NS Item

Providing and fixing first quality Star white vitreous china Urinal Division plate size 680x300 mm Hindware Cat No.61001 including cutting and making good the wall in cement mortar wherever required.NS Item

Providing and fixing 15 mm dia C.P. brass bib cock auto closing system similar to "Jaquar make Cat No. PRS-CHR-043" or approved equivalent make fixed to wall with PVC cleats and S.S. screws including cutting and making good the walls wherever required complete in all resects as directed by Engineer in charge. NS Item

Supplying and fixing 16 gauge stainless steel 304 trough single bowl matte finish of following size at top and bottom, 200mm deep and back side 500 mm high with holes for taps and 40mm C.P. brass waste complete in all respects. NS Item 1800x300 mm at top and 1800x200 mm at bottom

1200x300 mm at top and 1200x200 mm at bottom

1800x300 mm at top and 1800x200 mm at bottom

Providing and fixing of RO system having following capacities based on treated water consisting, (Required capacity and head of terrace pumps from tanks to RO-system ) (Dual Media Filter) (MNO2, Anthracite, Activated Carbon, Gravel & Sand Charged in Stainless Steel Pressure Vessel (Food Grade 316-L) of flowing with Frontal Pipe, Ball Valve & Pressure Gauge.) (Anti scalent Dosing) (0-6 LPH. Dosing Pump with HDPE 200 Litres. Tank.)( C-5 Micron Filter) (20" 5 Micron Cartridge Filter.) (High Pressure Pump) (CIP SYSTEM)( Stainless Steel Pump with HDPE tank.) (R O Module) (Required R.O. Membrane Module in Structural Membrane Housing.) (Electrical Panel) (Panel fitted with Auto-Cut Controls, Conductivity Meter and Pressure Gauge etc.) (pH Correction System)(Dosing Pump with HDPE tank)(RO Plant Skid) (Fabricated Stainless Steel Skid Mounted with RO Module, Electric Panel, High Pressure Pump, CIP System & pH Correction System.)(Complete Installation and Assembly of System PPR/CPVC Piping and Fittings of Standard make.) (500 LPH capacity with 2500 litres PVC food grain storage tank) NS Item

Providing and fixing storage type Water Cooler of the following capacity I.S.I. marked , stainless steel front panel , inlet float valve with all plumbing and electrical accessories, inlet, outlet, overflow and drain out connection to F.D. completes required. (Cooling capacity 170 litres/hr) (Storage capacity 380 litres) NS Item

Providing and fixing stainless steel hand drier similar to "Euronics make Cat No. EH-26NW" including providing necessary Concealed brackets painted with two or more coats of enamel paint of approved shade over a coat of primer, wiring cables from drier to plug, plug tops etc. including cutting and making good the walls wherever required complete as directed by Engineer in charge. NS Item

Supplying, installation, testing and commissioning of automatic submersible drainage pump set with level controller and dry running protector, with solid handling of 12mm working at 440V, three phase, of suitable H.P, 50 cycles A.C. supply including 10m cable as per manufactures specification including the required supply and fixing electrical panel board for two pumps with all accessories i.e. voltmeter, Ammeter, 3 phase indicating lamps, incoming and out going switches suitable size wiring, earthing etc. as per electricity rules complete in all respects.(2 nos. non clog pump giving a discharge of 250 LPM at 10m head having a solid handling capacity of 12 mm with wall mounted electrical panel board suitable for two pumps with provision for alternative operation of pumps, including all wiring from pumps to panel and earthing etc complete in all respects with accessories. (For Drainage Sump). NS Item

Supplying, installation, testing and commissioning of automatic submersible sewerage pump set with level controller and dry running protector, with solid handling of 40mm working at 440V, three phase, of 1 H.P, 50 cycles A.C. supply including 10m cable as per manufactures specification including the required supply and fixing electrical panel board for two pumps with all accessories i.e. voltmeter, Ammeter, 3 phase indicating lamps, incoming and out going switches suitable size wiring, earthing etc. as per electricity rules complete in all respects.(2 nos. non clog pump giving a discharge of 100 LPM at 10m head having a solid handling capacity of 40 mm with wall mounted electrical panel board suitable for two pumps with provision for alternative operation of pumps, including all wiring from pumps to panel and earthing etc complete in all respects with accessories. (For Sewerage Sump). NS Item

Providing, fixing, testing and commissioning of manual storage type water heater (Geyser) 25 Litres capacity similar to "Jaquar make Cat No. ELENA VERTICAL 25L" with automatic thermostatic control electric element, pressure release valve, M.S. nuts and bolts etc. conforming to IS: 2082, including cutting holes & making good the wall wherever required complete in all respects. NS Item

Providing and fixing 15 mm dia C.P. brass 2 way body bib cock (Jaquar make Cat. No. CON-CHR-041KN or approved equivalent make) including cutting and making good the walls wherever required complete in all respects. NS Item

Providing and fixing C.P. brass Hand shower (Health Faucet) with 1.2m PVC tube with wall hook (Jaquar make Cat. No. ALD-IVY-583 or approved equivalent make) fixed to wall with PVC cleats and S.S. screws including cutting and making good the walls wherever required complete in all resects as directed by Engineer in charge. NS Item

FIRE FIGHTING WORK: Supplying and laying the PVC insulated and sheathed armoured cables of 1.1 K.V. aluminium conductor including supplying and making end termination with brass compression glands.

25 sq.mm x 3.0 core NS ITEM

Providing, fixing, jointing and testing of heavy gauge M.S. ERW black pipes as per relevant IS: 1239 with special accessories like tees, elbows, welded joints for pipe and fitting and flanged joints rubber insertion nuts & bolts, washers for valves including earth work excavating refilling compaction etc. and treating under ground pipe with two coats of anti corrosive paint and wrapping 4mm thick PYKOTE on pipe fitting etc. complete in all respects. Thrust blocks of cement concrete at bends, tees etc. 150mm thick around in 1:2:4 (1cement: 2 coarse sand: 4 stone ballast 20mm and down gauge ). NS Item

100 mm dia ( IS1239 ) welded joint

Providing, fixing, welded joints and testing of heavy class M.S. ERW black pipes as per relevant IS 1239/3580 with special accessories tees, elbows, screwed/flanged joints, expansion joints, rubber insertion, nuts, bolts, washers or welded joint with flange joints on bends, including fixing the pipe with suitable flat iron strip clamps/brackets structural members, dash fastener, civil breakage, making good the same etc. painting with a primer coat and two coats of postal red enamel etc. complete as required.NS Item

100 mm dia welded joint

80 mm dia welded joint

50 mm dia screwed joint

Providing and fixing single headed hydrants flanged inlet with 63 mm female instantaneous outlet of stainless steel with bolts, nuts, washers etc complete with male blank caps, chains conforming to IS:5290 type A with stainless steel orifice plate to keep the pressure not more than 3.5 kg/sq.cm at any point. NS Item

Providing & fixing non-perlocating, rubber reinforced lined fire hose pipe (as per IS 636) type B of 63 mm dia and 15 m length as described below. The hose shall be rated for burst pressure of 35.7 Kg/sqcm. Hose shall be complete with ISI marked stainless steel male & female coupling (IS:903) bound & riveted to hose pipe with copper wire (Location : Internal fire hydrant) NS Item

Providing and fixing controlled percolation fire hose pipe (as per IS:8423) of 63 mm dia and 15 meter length rated for burst pressure of 35.7 Kg/sqcm. The hose shall be tested for flame resistance test in accordance to IS:8423. Hose shall be complete with ISI marked stainless steel male & female coupling (IS:903) bound & riveted to hose pipe with stainless steel rivets & 1.5 mm stainless steel wire (Location : External fire hydrant) NS Item

Providing and fixing standard short size stainless steel branch pipe with 20mm dia nozzle conforming to IS:903. Suitable for installation connections to hose coupling etc. as required. NS Item

Providing and fixing Cast Iron body IS: 210 FG 220 and double flange simple operation type Butterfly Valve conforming to IS: 13095 with SS304 disc and shaft nitrile rubber replaceable seat of the following size complete with bolts, nuts, washers and rubber insertions as per specification. NS Item

50 mm dia

80 mm dia

100 mm dia

Providing and fixing non-return valve C.I. Body complete with bolts, nuts washer & rubber insertions as required conforming to IS:5312. NS Item

100 mm dia

Providing and fixing air release valve complete as directed by Engineer in charge. 25 mm dia NS Item

Providing and fixing 0-14 kg Pressure Gauge of 100 mm dia including making necessary hole accessories etc. NS Item

Providing and fixing Fire Man axe as required with Test Certificate of 20,000 volts. NS. Item

Providing and fixing M.S. structure work fabricated from standard sections e.g. MS square bars, flats, rounds, angles, channels including cutting to size drilling, welding, fixing & welding to insert plates in RCC structure members as directed by Site In charge, including cutting and making good the walls, floors & RCC roof (for pipe supports, clamps, M.S. ladders & manholes for tank covers etc) including painting will two or more coats of enamel joint of approved colour over a coat of approved Steel Primer as for drawings & direction of the Site In charge. N.S Items

Providing and fixing of single arc expansion joints (rubber below) of following size complete with nuts, bolts and washers etc. NS. Items

100mm dia

ELECTRICAL NS:- Supply, installation, testing and commissioning of following ennealed tinned electric grade copper conductor PVC insulated and PVC sheathed jelly filled armoured telecommunication cable as per specifications. NS ITEM

5 pair armoured riser cable of 0.60 mm dia copper conductor

10 pair armoured riser cable of 0.60 mm dia copper conductor

20 pair armoured riser cable of 0.60 mm dia copper conductor

50 pair armoured riser cable of 0.60 mm dia copper conductor

Supply and installation, testing and commissioning following size KRONE make telephone tag block in lockable 16 gauge sheet medium duity PVC enclosure complete as required. NS ITEM

5 pair Krone type tag block

10 pair Krone type tag block

20 pair Krone type tag block

50 pair Krone type tag block

LIGHTING FIXTURES:- Supply of 20 Watt LED Linear Metal Construction commercial batten fitting with fuse protection suitable for Polycarbonate diffuser & aluminium heat sink complete suitable for both surface & suspended Mounting, complete in all respect 2000 system lumens PF>0.95, THD<10%, CRI>80, Sheet Thickness 0.8mm, Average Life 40000hrs @L70 with fixing clamps, nut, bolts and fixing arrangement with both side of existing MS pipe (in case of hanging )complete accessories all respect and as directed by engineer in charge., Make Philips BN021C LED20S PSU CW GR S2 or eqivalent as per approved By EIC

Supply of 2' * 2' panel light 30 watt/3600 lumens suitable for Polycarbonate diffuser & aluminium heat sink complete suitable for recessed Mounting, complete in all respect 3600 system lumens PF>0.95, THD<10%, CRI>80, Sheet Thickness 0.8mm, Average Life 40000hrs @L70 with fixing clamps, nut, bolts and fixing arrangement with both side of existing MS pipe (in case of hanging )complete accessories all respect and as directed by engineer in charge., Make Philips RC380B LED36S -4000 G4 L60 W60 PSU OD OC or eqivalent as per approved make

Supply of Downlighter 15 watt/1600 lumens suitable for Polycarbonate diffuser & aluminium heat sink complete suitable for recessed Mounting, complete in all respect 2000 system lumens PF>0.95, THD<10%, CRI>80, Sheet Thickness 0.8mm, Average Life 40000hrs @L70 with fixing clamps, nut, bolts and fixing arrangement with both side of existing MS pipe (in case of hanging )complete accessories all respect and as directed by engineer in charge., Make Philips DN 394B LED16S-6500 PSU WH or eqivalent as per approved make

Supply of Downlighter 12 watt/1200 lumens suitable for Polycarbonate diffuser & aluminium heat sink complete suitable for recessed Mounting, complete in all respect 2000 system lumens PF>0.95, THD<10%, CRI>80, Sheet Thickness 0.8mm, Average Life 40000hrs @L70 with fixing clamps, nut, bolts and fixing arrangement with both side of existing MS pipe (in case of hanging )complete accessories all respect and as directed by engineer in charge., Make PhilipsDN 393B LED12S-6500 PSU WH or eqivalent as per approved make

Supply of Mirror Light 10 watt/1150 lumens suitable for Polycarbonate diffuser & aluminium heat sink complete suitable for Surface Mounting, complete in all respect 1150 system lumens PF>0.95, THD<10%, CRI>80, Sheet Thickness 0.8mm, Average Life 40000hrs @L70 with fixing clamps, nut, bolts and fixing arrangement with both side of existing MS pipe (in case of hanging )complete accessories all respect and as directed by engineer in charge., Make Philips BN 021 LED10S- 6500 PSU GR S1 or eqivalent as per approved make

Supply of LED indoor surface downlighter suitable for general lighting. Luminaire should have polycarbonate cover with diffused optics. The luminaire should have CRI > 80 and CCT of 6500K. The luminaire shall be compliant with IP20 classification.The fixture should have a minimum system efficacy of 110 lumen/Watt and a minimum system lumen output of approx 1650 lumens and maximum system wattage of 15 Watts.power factor >0.95 , THD <10%. he fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Similar to PHILIPS make SM251C LED16S- 6500 PSU WH or eqivalent as per approved make.

Supply, Installation, Testing and Commissioning of 1400 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supply of Exhaust fan 300 mm sweep metal body with 50 HZ 230 volt ac complete with all respective accessories.

Supply and Erecting modular type computer jack RJ 45 with screwless connector approved make with mounting plate and box with wiring connections complete. NS ITEM

Supplying & fixing of 6 Core - Optic fiber cable OM4 - Unitube Corrugated steel tape Optical Fiber Cable as per IEC 60794-1NS ITEM

EXTERNAL ELECTRICAL:- SUB HEAD B - NON SCHEDULE ITEMS:- Supply of following sizes of XLPE insulated Copper Armoured cable, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS code and technical specifications.NS-55

2CX 2.5 SQMM Cu ARMOURD CABLE

2CX 4 SQMM Cu ARMOURD CABLE

Bidder Name

Amount

Rajesh Kumar Batra Contractor(GSTN-06AFJPB2634M1ZI)

Naresh Kumar Gupta and Co Pvt Ltd(GSTN-NA)

Naresh Kumar Gupta and Co Pvt Ltd

Naresh Kumar Gupta and Co Pvt Ltd