Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 LAdmitted-Finance | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | GKN CONSTRUCTIONS L1 |
|---|---|---|---|---|
| 1.00 | Providing and fixing by welding to steel frame heavy duty hinges of size 50x50x4mm | 60 | Nos | 120 ₹7,200 Lowest |
| 2.00 | Providing and fixing MS aldrop of size 250x16mm with Eye made of MS flats of thickness 5mm welded to the steel door with rounds made of flats 25x5mm and drop made of 40x5mm flat to required length | 20 | Nos | 350 ₹7,000 Lowest |
| 3.00 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. a) Hot finished welded type tubes. | 615 | Kg | 195 ₹1,19,925 Lowest |
| 4.00Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | ||||
| 4.01 | For roofing | 70 | sqm | 920 ₹64,400 Lowest |
| 4.02 | for cladding. Fixing to the weld mesh walls with bolts nuts washers on both faces. Inside washer to be of size to cover the square gap of weld mesh instead of self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal. | 65 | sqm | 920 ₹59,800 Lowest |
| 5.00 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on Old work. | 170 | Sqm | 200 ₹34,000 Lowest |
Tender Value
₹2.9 L
EMD Value
₹5,851
Closing Date
17 Dec 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER CIVIL
Executive Engineer (C), BSNL Civil Division MM Nagar, Third floor, BSNL Telelphone Exchange, No.99.JN Salai, KK nagar,Chennai 600078.
PROVIDING ROOF TO THE CAGE SHELTER FOR 5 SITES IN SRIPERUMBUDUR 4239SANTHAVEL THIRUMGL, 4260 THIRUPANDIYUR, KANCHEEPURAM 4020RL GOVINDAVADI AND TIURTHANI AREA POONIMANGADU , LAXMAPURAM
2025_BSNL_258433_1
28/BSNL/CDMMN/CHN/2025-26
Open Tender
Civil Works - Others
Item Rate
30 days
CHENNAI
AS PER TENDER DOCUMENT
3 documents required · 3 mandatory
₹590
BSNL, CHENNAI TELEPHONES
₹5,851
Yes
19 Dec 2025
9 Dec 2025
19 Dec 2025
9 Dec 2025
17 Dec 2025
9 Dec 2025
Amount
Providing and fixing by welding to steel frame heavy duty hinges of size 50x50x4mm
Providing and fixing MS aldrop of size 250x16mm with Eye made of MS flats of thickness 5mm welded to the steel door with rounds made of flats 25x5mm and drop made of 40x5mm flat to required length
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. a) Hot finished welded type tubes.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
For roofing
for cladding. Fixing to the weld mesh walls with bolts nuts washers on both faces. Inside washer to be of size to cover the square gap of weld mesh instead of self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on Old work.
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.49 MB
PoonimangaduTender1.pdf
Tender Documents • 0.48 MB
BOQ_298378.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .