Construction of proposed new Medical College at Sivasagar (Charaideu) District, Assam

Amount

CIVIL WORK Surface dressing of ground including removing vegitation and/ or undulation of ground not exceeding 150mm deep and disposal of rubbish outside the periphery and lift up to 1800mm in all kinds of soil.

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. Up to a depth of 2.00 M below the existing ground level. In ordinary soil

Extra over item no.1.1(A) above for each 1 m depth or part thereof beyond the initial depth of 2m. (from 2 m to 3 m)

Extra over item no.1.1(A) above for each 1 m depth or part thereof beyond the initial depth of 2m. (from 3 m to 4 m)

Extra over item no.1.1(A) above for each 1 m depth or part thereof beyond the initial depth of 2m. (from 4 m to 5 m)

Extra over item no.1.1(A) above for each 1 m depth or part thereof beyond the initial depth of 2m. (from 5 m to 6 m)

Extra over item no.1.1(A) above for each 1 m depth or part thereof beyond the initial depth of 2m. (from 6 m to 7 m)

Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, complete as directed and specified (measurement to be taken in the face area timbered) (a) Upto a depth of 1.5 metre

Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, complete as directed and specified (measurement to be taken in the face area timbered) (b) Above 1.5 m upto 3.00 m depth

Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, complete as directed and specified (measurement to be taken in the face area timbered) (c) Above 3.00 m upto 4.50 m depth

Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, complete as directed and specified (measurement to be taken in the face area timbered) (d) Above 4.50 m upto 6.00 m depth

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c )With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (e)Extra cost for lifting of sand for filling of sunk floor for each subsequent floors above the ground floor as directed and specified.

ANTI-TERMITE TREATMENT Pre construction anti - termite treatment in the back fill in immediate contact with the foundation structure after completion, column, wall etc. to a depth of 450mm and width 300mm (when required refill in 200mm thick layers) applying the emulsion @ 5 (five) litres per square meter towards the concrete and masonry walls so as to ensure earth in contact with the structure well treated - with chemical (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying in the junction of walls, column with the floor before laying floor and after operation of item no. 26.1.3 above making a channel 30mmx30mm all over the walls and making rod holes @ 150mm apart up to ground level below and applying emulsion @ 11 litres per square meter of vertical plinth wall surface inside the building so as to soak the soil with the emulsion up to the ground level and refill the holes and channel with the original materials obtained in making channels (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying the soil along the external perimeter of the building (after construction completed) to a distance close to the plinth wall as specified and as directed by the deptt. up to a depth of 300mm making rod holes along the line @ 150mm apart to a depth of 300mm and applying emulsion @ 4.5 litres per running meter ensure moistening of the soil with emulsion (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (b) Other than Guwahati city

Extra lead per km truck carriage for sand gravel beyond the initial lead of 8 km.

Plain cement concrete works with coarse aggregate of sizes 13 mm to 32 mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, curing complete (Shuttering where necessary shall be measured and paid saperately). In prop 1 cement :4 Sand :8 coarse aggreget by volume

Plain cement concrete floor base in prop 1:3:6 laid in alternate bays as specified with coarse agg. of size 13 mm to 32 mm including dewatering if necessary, and curing etc. complete. 100 mm thick

Providing plinth protection 50mm thick to cement concrete 1 : 3 : 6 with coarse agg.of 20mm nominal size including finishing the surface with 10mm thick cement plaster in proportion 1:3 with a floting coat of neat cement finished.

Providing cast in-situ machine driven reinforced cement concrete piles of required bore-diameter, lengths and with reinforcement as per specifications and drawings including using of Bentonite solution and admixture. Reinforcement to be measured and paid separately as per item no4. (v) Concrete Grade M25 - 500mm bore diameter- uniform pile

Extra for boring specified diameter pile in high sub-soil water level requiring use of drilling mud and extra cement (v) 500 mm dia

Empty boring for specified diameter piles from ground level to cut-off level. f) Pile Dia 500 mm

Routine test for test loading to 1.5 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test.Safe load capacity from 21 tonnes to 25 tonnes

Initial test for test loading to 2 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test.Safe load capacity from 21 tonnes to 25 tonnes

Demolishing RCC / PCC pile head of different diameters carefully without disturbing the remaining portion of the pile including opening out of the pile head to be demolished by excavating the earth upto required depth and clearing the debris as directed.

Providing form work of ordinary timber planking so as to give rough finish including centering , shuttering, struting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0m & removal of the same for in situ reinforced concrete and plain concrete work in: Foundations, footings, bases of columns, pile cap, raft and mass concrete work etc. Using 25 mm thick plank

Vertical surfaces such as walls (any thickness), parapet walls, partition, walls of septic tank, inspection pit and the like including attached pilasters, butresses, plinth and string courses. Using 25 mm thick plank Gr. Floor to Terrace

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above - 1st Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above - 2nd Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above - 3rd Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above - 4th Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above - 5th Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above - 6th Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above - 7th Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above - 8th Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above - 9th Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above - 10th Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above - 11th Floor

Staircase with sloping or stepped or stepped soffits including riser and stringers but excluding landing. Using 38 mm thick plank. Gr. Floor to Terrace

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above. - 1st Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above. - 2nd Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above. - 3rd Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above. - 4th Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above. - 5th Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above. - 6th Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above. - 7th Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above. - 8th Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above. - 9th Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above. - 10th Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above. - 11th Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above. - 12th Floor

Extra for each subsequent 1.0 M height or part there of beyond the initial height of 4.0 M as mentioned in item no. 3.1.1

Providing form work of ordinary timber planking and removal of the same in edge of slab and breaks in floors and walls etc. of in situ reinforced concrete work upto first floor level. Thickness not exceeding 200 mm Gr. Floor to Terrace

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item no. 3.1.3(a). - 1st Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item no. 3.1.3(a). - 2nd Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item no. 3.1.3(a). - 3rd Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item no. 3.1.3(a). - 4th Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item no. 3.1.3(a). - 5th Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item no. 3.1.3(a). - 6th Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item no. 3.1.3(a). - 7th Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item no. 3.1.3(a). - 8th Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item no. 3.1.3(a). - 9th Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item no. 3.1.3(a). - 10th Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item no. 3.1.3(a). - 11th Floor

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item no. 3.1.3(a). - 12th Floor

PLYBOARD SHUTTERING (FORMWORK) Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0 M and removal of the same of in situ reinforced concrete and plain concrete work in: Columns. Pillars, posts and strut of square / rectangular / polygonal in plan or any shape like Tee / L etc., having plane vertical face

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 1st Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 2nd Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 3rd Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 4th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 5th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 6th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 7th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 8th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 9th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 10th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 11th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 12th Floor

Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0 M and removal of the same of in situ reinforced concrete and plain concrete work in: Sides and soffits of beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal tiles. For depth not exceeding 1.0M

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 1st Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 2nd Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 3rd Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 4th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 5th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 6th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 7th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 8th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 9th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 10th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 11th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 - 12th Floor

Providing formwork using 2mm pressed bend shuttering plate of mild sheet and tubular telescopic steel props including centering, shuttering, strutting and propping etc. complete and removal of the same for in situ reinforced concrete and plain concrete work in: Flat Surfaces such as soffits of suspended floors, roofs, landings and the like.

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.3.1.3 - 1st Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.3.1.3 - 2nd Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.3.1.3 - 3rd Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.3.1.3 - 4th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.3.1.3 - 5th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.3.1.3 - 6th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.3.1.3 - 7th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.3.1.3 - 8th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.3.1.3 - 9th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.3.1.3 - 10th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.3.1.3 - 11th Floor

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.3.1.3 - 12th Floor

Supplying, fitting and fixing in position reinforcement bars confirming to relevant I.S. Code for R.C.C. work/ R.B. walling including straigtening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level.) From primary Producer: TATA/ SAIL/ Jindal Steel/ Shyam Steel/ RINL TMT bars (Fe 500 D)

Extra over item for each subsequent floor or part thereof above first floor level. - 1st Floor

Extra over item for each subsequent floor or part thereof above first floor level. - 2nd Floor

Extra over item for each subsequent floor or part thereof above first floor level. - 3rd Floor

Extra over item for each subsequent floor or part thereof above first floor level. - 4th Floor

Extra over item for each subsequent floor or part thereof above first floor level. - 5th Floor

Extra over item for each subsequent floor or part thereof above first floor level. - 6th Floor

Extra over item for each subsequent floor or part thereof above first floor level. - 7th Floor

Extra over item for each subsequent floor or part thereof above first floor level. - 8th Floor

Extra over item for each subsequent floor or part thereof above first floor level. - 9th Floor

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately). Using Batching Plant/ RMC/ Truck mounted batching plant including Transit Mixer and Concerete Pump. (I) Using Mixer Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. B) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required. C) M25 grade concrete

P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required. ) In substructure up to plinth level FOR COLUMN M30 grade concrete

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately). Using Batching Plant/ RMC/ Truck mounted batching plant including Transit Mixer and Concerete Pump. (I) Using Mixer Machine (B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.(For all floor levels) c) M25 grade concrete

P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required. ) In super structure from plinth level up to 1st floor level. FOR COLUMN M30 grade concrete

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. In Sub-structure upto plinth level including dewatering if necessary. In proportion 1:6

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. In super structure above plinth level upto 1st floor level -(In proportion 1:6) Gr. Floor To Terace Floor

Extra over item above for brick work in each subsquent floor or part thereof above 1st floor level. - 1st Floor

Extra over item above for brick work in each subsquent floor or part thereof above 1st floor level. - 2nd Floor

Extra over item above for brick work in each subsquent floor or part thereof above 1st floor level. - 3rd Floor

Extra over item above for brick work in each subsquent floor or part thereof above 1st floor level. - 4th Floor

Extra over item above for brick work in each subsquent floor or part thereof above 1st floor level. - 5th Floor

Extra over item above for brick work in each subsquent floor or part thereof above 1st floor level. - 6th Floor

Extra over item above for brick work in each subsquent floor or part thereof above 1st floor level. - 7th Floor

Extra over item above for brick work in each subsquent floor or part thereof above 1st floor level. - 8th Floor

Extra over item above for brick work in each subsquent floor or part thereof above 1st floor level. - 9th Floor

Extra over item above for brick work in each subsquent floor or part thereof above 1st floor level. - 10th Floor

Extra over item above for brick work in each subsquent floor or part thereof above 1st floor level. - 11th Floor

Extra over item above for brick work in each subsquent floor or part thereof above 1st floor level. - 12th Floor

112 mm thick reiforced brick wall in prop 1:5 reinforced with two lines of M.S. rod/ Tor Steel as specified embeded in 38 mm thick concrete course in prop 1:2:4 with coarse agg. 12 mm down at every fourth courses embeded with protruding rod in column including curing etc. complete as directed (M.S. rod/ Tor steel shall be measured and paid separately) in super structure up to 1st floor level.

Extra for brick walling for each subsquent floor or part thereof above 1st floor level. 112 mm thick brick/ R.B. wall - 1st Floor

Extra for brick walling for each subsquent floor or part thereof above 1st floor level. 112 mm thick brick/ R.B. wall - 2nd Floor

Extra for brick walling for each subsquent floor or part thereof above 1st floor level. 112 mm thick brick/ R.B. wall - 3rd Floor

Extra for brick walling for each subsquent floor or part thereof above 1st floor level. 112 mm thick brick/ R.B. wall - 4th Floor

Extra for brick walling for each subsquent floor or part thereof above 1st floor level. 112 mm thick brick/ R.B. wall - 5th Floor

Extra for brick walling for each subsquent floor or part thereof above 1st floor level. 112 mm thick brick/ R.B. wall - 6th Floor

Extra for brick walling for each subsquent floor or part thereof above 1st floor level. 112 mm thick brick/ R.B. wall - 7th Floor

Extra for brick walling for each subsquent floor or part thereof above 1st floor level. 112 mm thick brick/ R.B. wall - 8th Floor

Extra for brick walling for each subsquent floor or part thereof above 1st floor level. 112 mm thick brick/ R.B. wall - 9th Floor

Extra for brick walling for each subsquent floor or part thereof above 1st floor level. 112 mm thick brick/ R.B. wall - 10th Floor

Extra for brick walling for each subsquent floor or part thereof above 1st floor level. 112 mm thick brick/ R.B. wall - 11th Floor

Extra for brick walling for each subsquent floor or part thereof above 1st floor level. 112 mm thick brick/ R.B. wall - 12th Floor

Light Weight Autoclaved Aerated concrete Block work using Grade-I AAC block of required Size and thickness of compressive strength 40Kg/cm2 having dry density 550 to 650 Kg /Cum conforming to IS-2185 Pt-3 or pt-4 in cement mortar of prop 1:4 including racking out joints and curing complete as specified & directed. (protruding rod is to be provided at every 3 course interval and will be measured and paid separately) (II) In superstructure above plinth level up to 1st floor level. (a) For 225mm thick wall

Extra for AAC block walling for each subsequent floor or part thereof above the 1st floor level (i) - 225mm thick wall over Item No. 43 - 1st Floor

Extra for AAC block walling for each subsequent floor or part thereof above the 1st floor level (i) - 225mm thick wall over Item No. 43 - 2nd Floor

Extra for AAC block walling for each subsequent floor or part thereof above the 1st floor level (i) - 225mm thick wall over Item No. 43 - 3rd Floor

Extra for AAC block walling for each subsequent floor or part thereof above the 1st floor level (i) - 225mm thick wall over Item No. 43 -4th Floor

Extra for AAC block walling for each subsequent floor or part thereof above the 1st floor level (i) - 225mm thick wall over Item No. 43 -5th Floor

Extra for AAC block walling for each subsequent floor or part thereof above the 1st floor level (i) - 225mm thick wall over Item No. 43 -6th Floor

Light Weight Autoclaved Aerated concrete Block work using Grade-I AAC block of required Size and thickness of compressive strength 40Kg/cm2 having dry density 550 to 650 Kg /Cum conforming to IS-2185 Pt-3 or pt-4 in cement mortar of prop 1:4 including racking out joints and curing complete as specified & directed. (protruding rod is to be provided at every 3 course interval and will be measured and paid separately) For 125mm thick wall In superstructure above plinth level up to 1st floor level.

Extra for AAC block walling for each subsequent floor or part thereof above the 1st floor level - 125mm thick wall over Item No. 44 - 1st Floor

Extra for AAC block walling for each subsequent floor or part thereof above the 1st floor level - 125mm thick wall over Item No. 44 - 2nd Floor

Extra for AAC block walling for each subsequent floor or part thereof above the 1st floor level - 125mm thick wall over Item No. 44 - 3rd Floor

Extra for AAC block walling for each subsequent floor or part thereof above the 1st floor level - 125mm thick wall over Item No. 44 - 4th Floor

Extra for AAC block walling for each subsequent floor or part thereof above the 1st floor level - 125mm thick wall over Item No. 44 - 5th Floor

Extra for AAC block walling for each subsequent floor or part thereof above the 1st floor level - 125mm thick wall over Item No. 44 - 6th Floor

Providing dressed wood work in post, walls,battens, post plate bressumers etc. including supplying and fixing with spikes, nails,bolt and nuts of 12mm dia(M.S) and required length etc.complete with kiricide oiling two coats to faces in contact with C.C or masonry (M.S flats, angle cleats and bolt and nuts required for flats,angle cleats wherever use shall be measured and paid separately) - (a) With sal wood

Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. Non decorative type and block board core. (ii) 35 mm thick .

Providing, fitting and fixing factory made Santro Flush door shutters having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly thick cross bands, styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately.) (b) 35mm thick

Extra for providing lapping with 1st class Teak wood battens of 25mm minimum depth on all edges of the shutters.

Providing, fitting and fixing Wire gauge shutters using galvd. M.S. wire of I.S designation 85G with wire of dia 0.56mm for doors, windows and clerestory windows including oxidised M.S butt hinges (100mm x 58mm x1.90mm) (ii) 35 mm thick .

Supplying, fitting, fixing Stainless Steel fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished )- (b) Tower Bolt - (ii) 250mm x 10mm

Supplying, fitting, fixing Stainless Steel fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished )- (b) Tower Bolt - (iv) 150mm x 10mm

Providing and fixing 25mm thick wooden shutters for cup board including black enamelled M.S butt hinges (75mmx 40mmx1.12mm) 6 nos. with necessary wood screws (fully panelled) (i) Using wooden plank a)With Teak wood / Sissu wood.(fully panelled)

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) r) Curtain rod i) 20mm x 2mm

Providing and fixing 12 mm thick and 150mm wide pelmet with 25 mm dia wooden curtain rod and bracket including fixing with 15mmx3mm M.S flat 100mm long plugs complete. (a) First class Indian Teak wood/ Sisu wood

Supplying and installing uPVC- Sliding Windows made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent. With 5mm clear glass (a) 2 Track Sliding Window with Flyscreen using uPVC section of sizes 88mm x 50 mm x 2.4mm thick wall for frame with inbuilt flyscreen track, 37mm x 61mm x 2.4mm thick wall for glass sash, 25mm x 49mm x 2.4mm thick wall for flyscreen sash having 1.5mm thick reinforcement, Interlock: 43mm x 23mm (Glass Panel) (WINSTA KOMMERLING/ FINESTA/ ENCRAFT) (i) 2-Panel with 5mm clear float glass

Providing and fixing stainless steel (Grade 304) railing made of hallow tubes, chanells, plates etc. including welding grinding buffing, polising and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i.e. fixing railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge.(for payment purpose only weight of stainless steel members shall be considered excluding fixing assessories such as nuts, bolts, fasteners etc.)

Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. I . Plain grill ( Fixed to wooden frames)

Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint.

Providing and fixing rolling shutters of approved make made of 80mm wide M.S. laths interlocked together through their entire length and jointed together at the ends by end-locks mounted on specially designed pipe shaft with bracket plates, guide channels and arrangements for inside and outside locking with push-pull operation complete including cost of wire, spring and hood cover for the shutters.

Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately). (a) 1.25mm thick sheet (i) Size 90mm x 60mm (Single rebate)

40 mm thick cement concrete floor consisting of 25 mm under layer of cement concrete in prop 1:3:6 (1cement : 3coarse sand : 6 coarse aggregate of 12.5 mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement : 1coarse sand : 2 coarse aggregate of 10 mm and down) finished with a floating coast of neat cement finish using cement slurry for bond @ 2.75 kg. per sqm. of floor area, wearing layer is to be laid in panels including curing complete as directed.

Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (b) 20 mm thick

Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). Delux range Somany/ Orient/Nitco/Qutone Make -Of size 300mmx300mm and above

Providing polished Ceramic wall Tiles of approved quality, size, shape and thickness not less than 8 mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 Cement: 3 Coarse sand), including cutting where necessary finished with flush pointing with fix-A Tile (Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry) mixed with approved pigment to match the shade of tiles complete at all levels as specified and directed (coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Wall means both interior and exterior walls). Delux Range (Somany/ Orient/ Nitco/ Varmora Make) - of size 300mm x 450mm and above

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 8mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) (a)Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make Of size 600mmx600mm and above

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 8mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) (b)Executive range (800mmx800mm) Somany/Varmora/Nitco/Orient made Of size 800mmx800mm and above

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 8mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) (c) Delux range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make Of size 1000mmx1000mm and above

Providing Polished vitrified wall tiles of approved quality of specified size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/ Sika/ Pedelite/ Rouf)/ White cement slurry mixed with approved pigment to match the shade of tiles complete at all levels as specified and directed (coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). Of size 300mm x 600mm and above

Kota stone slab flooring of 18 mm thick over 20 mm thick base of cement mortar 1 : 6 (1 cement : 6 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete. 550mm x 550mm

Kota stone slab of 18 mm thick in riser of steps, skirting, dado and pillars laid with 10 mm thick cement plaster 1 : 3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete. 550mm x 550mm

Extra for nosing in steps of red or white, fine dressed and rubbed with sand stone.

Providing Polished Granite Slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/ Sika/ Pedelite/ Rouf)/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (Cement plastering to be measured and paid separatly) (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). Delux Quality - With Fix-A-Tile (Choksey/ Sika/ Pedelite/ Rouf)

Providing, fitting and fixing Laminated abrasion resisitant wooden flooring from Uniproducts (India) Ltd. of thickness not less than 8.2 mm laid on existing concrete floor with under layer of approved transparent polythene and foam sheet to make the floor surface even and sound free complete as Per Design and approved by Department. Unitex AC4 Brand

Providing Antiskid tile of approved quality size, shape and thickness not less than 8mm on floor, skirting over a cement mortor bed of 15 mm thick in prop. 1:3 ( 1 Cement : 3 Coarse Sand) approved make fix with Fix-A-Tile (Choksey/sika/Pedelite/Rouf)/white Cement Complete at all level as specified and directed. Ceremic - (Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make) Normal Range (Size 300mm X 300mm and above)

Providing Antiskid tile of approved quality size, shape and thickness not less than 8mm on floor, skirting over a cement mortor bed of 15 mm thick in prop. 1:3 ( 1 Cement : 3 Coarse Sand) approved make fix with Fix-A-Tile (Choksey/sika/Pedelite/Rouf)/white Cement Complete at all level as specified and directed. (B)Vitrified- (Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make) (iii-b)Executive Range-2, Imperial Series -Gres Tiles (Size 600mm X 600mm and above)

10 mm cement plaster in single coat on fair side of brick/concrete walls for interior plastering upto 1st floor level including aries or rounded angles not exceeding 80mm grith and finished even and smooth including curing complete as directed. In cement mortar 1:6 Gr. Floor to Terrace Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 1st Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 2nd Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 3rd Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 4th Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 5th Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 6th Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 7th Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 8th Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 9th Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 10th Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 11th Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 12th Floor

15 mm cement plaster in single coat on rough side of single or half brick walls for interior plastering upto 1st floor level including aries or rounded angles not exceeding 80mm grith and finished even and smooth including curing complete as directed. In cement mortar 1:6 Gr. Floor to Terrace Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 1st Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 2nd Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 3rd Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 4th Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 5th Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 6th Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 7th Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 8th Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 9th Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 10th Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 11th Floor

Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed. (a) On single coat plaster. - 12th Floor

20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. On rough side (backing coat 15 mm and finishing coat 5mm thick) d) In cement mortar 1:6 Gr. Floor to Terrace Floor

Extra over item above for exterior plastering over wall for every additional floor or part there of beyond 1st floor level including curing complete as directed. (a) On single coat plaster. -1st Floor

Extra over item above for exterior plastering over wall for every additional floor or part there of beyond 1st floor level including curing complete as directed. (a) On single coat plaster. -2nd Floor

Extra over item above for exterior plastering over wall for every additional floor or part there of beyond 1st floor level including curing complete as directed. (a) On single coat plaster. -3rd Floor

Extra over item above for exterior plastering over wall for every additional floor or part there of beyond 1st floor level including curing complete as directed. (a) On single coat plaster. -4th Floor

Extra over item above for exterior plastering over wall for every additional floor or part there of beyond 1st floor level including curing complete as directed. (a) On single coat plaster. -5th Floor

Extra over item above for exterior plastering over wall for every additional floor or part there of beyond 1st floor level including curing complete as directed. (a) On single coat plaster. -6th Floor

Extra over item above for exterior plastering over wall for every additional floor or part there of beyond 1st floor level including curing complete as directed. (a) On single coat plaster. -7th Floor

Extra over item above for exterior plastering over wall for every additional floor or part there of beyond 1st floor level including curing complete as directed. (a) On single coat plaster. -8th Floor

Extra over item above for exterior plastering over wall for every additional floor or part there of beyond 1st floor level including curing complete as directed. (a) On single coat plaster. -9th Floor

Extra over item above for exterior plastering over wall for every additional floor or part there of beyond 1st floor level including curing complete as directed. (a) On single coat plaster. -10th Floor

Extra over item above for exterior plastering over wall for every additional floor or part there of beyond 1st floor level including curing complete as directed. (a) On single coat plaster. -11th Floor

Extra over item above for exterior plastering over wall for every additional floor or part there of beyond 1st floor level including curing complete as directed. (a) On single coat plaster. -12th Floor

15 mm thick plain cement mortar bands in cement mortar 1:4 in width including curing complete as directed. A) Up to 300 mm width - (a) Flush band

15 mm thick plain cement mortar bands in cement mortar 1:4 in width including curing complete as directed. A) Up to 300 mm width - (b)Raised band

Applying one coat of cement primer of approve brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Providing two coats of Birla White Wall Care Putty (Water Resistance White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm). Thickness = 1.5 mm thick

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J&N paint/ Narolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J&N paint/ Narolac).

Painting two coats (Including priming coat) on new wood and wood based surface surface with enamel paint of approved brand and manufactures (Asian paint/ Berger paint/ ICI paint/ J&N paint/ Narolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i) Surfaces over 100 mm in width or girth. (b)High gloss (Asian paint/ Berger paint/ ICI paint/ J&N paint / Nerolec).

Painting two coats (Including priming coat) on new steel and metal surface surface with enamel paint of approved brand and manufactures (Asian paint/ Berger paint/ ICI paint/ J&N paint/ Narolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter. (i) Surfaces over 100 mm in width or girth. (b) High gloss (Asian paint/ Berger paint/ ICI paint/ J&N paint / Nerolec).

Finishing old/ new wall with water proofing weather coat smooth anti-fungal premium textured exterior finish of Sandex Matt brand of Snowcem India Ltd. of required shade after clering and clearing the surfaces etc.including scaffolding complete as directed at all levels (two coats).

Providng and laying of plaster (1:4) with GI chicken/PVC Wire Mesh/Glass Fibre Mesh Or Providing or laying of wall putty of 1mm(Max) thick over the insuboard's bottom surface and painting i) Providng and laying of plaster (1:4) with GI chicken/PVC Wire Mesh/Glass Fibre Mesh

Providing, fitting and fixing anodised aluminium framed glazed doors with partition walls partly glass and partly prelaminated board with anodised aluminium frame made of 100mm x 43mm x 2mm sections of approved brand with doors style of size 81mm x 43mm x 2mm, top rails 46mm x 43mm x 2mm, lock rails 81mm x 43mm x 2mm, fitting with glazing clip, special rubber type gusket complete including hydraulic floor spring pivot aluminium door handle lock angles cleat etc. complete as directed by the department at all levels. 6mm thick glass panes and 12mm prelaminated board

Providing, fitting and fixing coloured anodised aluminium sliding glazed doors with anodised aluminium frames made of 100mm x 45mm x 2mm section of approved brand with door style of size 81mm x 45mm x 2mm, top rails 55mm x 45mm x 2mm, lock rails 81mm x 45mm x 2mm, fitted with glazing clip, special type rubber gasket complete including roller, tower bolt, aluminium door handle, lock, angles, cleat etc. complete as specified and directed by the department at all levels. - 6mm clear glass

FOR TOILET WATERPROOFING Applying 2 coats of 1mm thick elastomeric cementitious waterproofing coating Brushbond RFX of Fosroc Chemicals for water proofing structures like roof slabs, basement, sunken slabs, water tank etc., after proper surface preparation and soaking the surface with water prior to application complete as specified and directed by the Department at all levels.

FOR ROOF (A)Providing & applying over roof slab/raft slab, polymer modified bituminous /PU waterproofing membrane Proofex SM / Nitoproof 600 PF, Fosroc Chemical or equivalent on an unprimed substrate using specially designed spray application applicaation to be applied in a single coat, using wet on wet passes to give a nominal dry film thickness of 2 mm followed by applying ProofexGeo Textile having weight of 200gm per Sqm immediately after the application of Proofex SM Membrane when the surface is still wet but not tacky and as specified and directed by the department.

FOR TOILET & ROOF Supplying, providing, mixing and laying over waterproofing layers/coatings ( brick bat or water proofing) with cement mortar screed of average 25mm thick or as per drawings / requirements in proportion 1:4 (1 cement : r sand) admixed with integral waterproofing admixture Conplast x 421IC of Fosroc Chemicals @ 125ml per bag of cement complete as specified and directed by the Department at all levels.

FOR TOILET & ROOF Filling sunken floor with broken jhama brick bats and sand including compacting and supplying of materials complete as specified and directed upto first floor level.

Extra cost for lifting of brickbats and sand for filling of sunk floor for each subsequent floors above the ground floor as directed and specified.-1st Floor

Extra cost for lifting of brickbats and sand for filling of sunk floor for each subsequent floors above the ground floor as directed and specified. - 2nd Floor

Extra cost for lifting of brickbats and sand for filling of sunk floor for each subsequent floors above the ground floor as directed and specified. - 3rd Floor

Extra cost for lifting of brickbats and sand for filling of sunk floor for each subsequent floors above the ground floor as directed and specified.-4th Floor

Extra cost for lifting of brickbats and sand for filling of sunk floor for each subsequent floors above the ground floor as directed and specified.-5th Floor

Extra cost for lifting of brickbats and sand for filling of sunk floor for each subsequent floors above the ground floor as directed and specified.-6th Floor

Extra cost for lifting of brickbats and sand for filling of sunk floor for each subsequent floors above the ground floor as directed and specified.-7th Floor

Extra cost for lifting of brickbats and sand for filling of sunk floor for each subsequent floors above the ground floor as directed and specified.-8th Floor

Extra cost for lifting of brickbats and sand for filling of sunk floor for each subsequent floors above the ground floor as directed and specified.-9th Floor

Extra cost for lifting of brickbats and sand for filling of sunk floor for each subsequent floors above the ground floor as directed and specified.-10th Floor

Extra cost for lifting of brickbats and sand for filling of sunk floor for each subsequent floors above the ground floor as directed and specified.-11th Floor

Providing and fixing of leak proof,fire retardant and Uv resistant skylighting galzing with Lexan polycarbonate sheet fixed with specially designed Domal management system confirming to IS:737 alloy & temper 6063 - T6 with a UTS of 180 to 200 mpa and weight of 1.03 kg/mtr. approx with EPDM rubber gasket of specific gravity as per ISO 2781,age resistant as per ASTM - D573 hardness as per 2240 & tensile strength as per ASTM 412 including the silicon sealent GE Bayer Weathersil NY as per drawing and directed by the Engineer in charge. 10 mm thick Polycarbonate Sheet (Multiwall)

Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical locations in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions.The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in-Charge. (Material shall conform to ASTM 6063). - Floor Joint of 200 mm gap

Providing and fixing of expansion joint system related with wall joint (internal/external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning /centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall conform to ASTM 6063.) Wall Joint of 200 mm gap

Providing and fixing of expansion joint system of approved make and manufacture for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates as per ASTM B221-02. The system shall be such that it provides water tight roof to roof /roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.) Roof Joint of 200 mm gap

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade - Area of slab upto 0.50 sqm

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade - Area of Slab over 0.50sqm

Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. -Granite work.

Extra for fixing marble/granite stone over and above coresponding basic item, in facia and drops of width upto 150 mm with expoxy resin based (Araldite or equivalent) adhesive including cleaning etc. complete.

Extra for providing opening of required size & shape for wash basins/kitchen sink in kitchen platform. Vanity counters and similar location in marble/granite/stone work including necessary holes for pillar taps etc. including rubbing,moulding and polishing of cut edges etc. complete.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): Rectangular or square.

Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).

Providing and fixing fire resistant door frame of section 50 x 60mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter. The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded).

Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately).

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per direction of Engineer-in-charge. The glass shall be clear, toughened, interlayered, non-wired fire resistant having 11 mm thickness of approved brand with 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 15 min of insulation (EI15) and having a sound reduction of 37dB and LT of 86%. Glass shall be compliant to class 2(B)2 category of Impact Resistance as per EN 12600. The glass should be manufactured in UL & TUV audited Facility and including UL-EU Certification.The maximum glazing size cannot be more than 1100 mm x 2200 mm (w x h) or 2.42 sq mts in total area. The test report for the complete system (Glazed Door or Partition) will be considered valid only if it contains the stamp and signature of the authorized signatory from the glass manufacturer. (Actual glass size is to be measured at site for payments).

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/ sqm(both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture’s specification and direction of engineer in charge all complete. 75 mm overall thickness partition with 12.5 mm thick double skin fire rated board conforming to IS:2095: part I

Providing and fixing approved brand and manufacture SS 304 Lever Handle D-type fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 grade SS 304 grade Mortice lock with key cylinder fixed fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 grade wall mounted door buffer fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 grade Door Stopper - door mounted hanging type fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured).

Providing and fixing approved brand and manufacture SS 304 grade D type 1200mm Pull Handle with 32mm dia fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 grade D type 300mm Pull Handle with 32mm dia fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 grade Glass to Glass Lock Round type with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Toilet Cubical Providing and fixing Toilet Cubicle (of following standard dimension which includes 600 mm door size width) made of heat, bacteria, water, chemical, scratch, impact and anti bacterial resistant 12 mm thick solid compact laminate panels Finish of the compact laminate should be raw silk which include doors, pilasters and intermediate panels finished with approved texture/shade as per the detail drawing and as per IS 2046 (Indian Standard) and as per fire retardant BS-476/97 standard. This also includes providing and fixing in position necessary hardware made out of Stainless Steel (Grade 316) as per manufacturer's specifications and EIC instructions like (1) Door Knob, (2) Gravity Hinges, (3) Thumb turn lockset indicators, (4) Coat hooks, (5) U- Channels, (6) SS-Shoe Box Plate, (7) MS-Base Plate, (8) Rubber noise deafening tape, (9) Screws and wall Plugs.

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 50 mm

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type)

Structural steel work riveted or bolted in built up sections, trusess and framed work, including cutting,hoisting,fixing in position and applying a priming coat of approved ateef primer all complete.

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coar of approved steel primer, welded and bolted including special shaped washers etc. complete: Hot finished welded type tubes

Steel work welded in built up sections/framed work including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces

Providing and fixing of Hollow metal lead lined door from ISO 9001-2000 certified manufacturer. Pressed Galvanized steel Single/Double leaf to required sizes of approved make shakthi met-door or approved equivalent which consists of frame, shutter, infill and finish as detailed below Door frame shall be double rebate profile of size 143x57 mm made out of 1.60mm (16 gauge) thick galvanized steel sheet. Frames shall be metered and field assembled with self tabs. The inside face of the frame face trim to rebate height should be protected with 2mm thick lead line. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Rubber door silencers should be provided on the striking jamb. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame installed should be grouted with cement & sand slurry necessary for fire doors on the clear masonry opening. Door leaf shall be 48mm thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 1.2 mm (18 gauge) thick galvanised steel sheet. The internal construction of the door should be rigid with lead line of 2mm thick all across the inside of the exposed surface. In addition the door should have a basic infill Honey comb core with necessary reinforcement both on top and bottom. All doors should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers as per ANSI Standard. The edges should be interlocked with a bending radius of 1.4 mm. All doors and frames shall be finished with etched primer coating, stove zinc phosphate primer and thermosetting polyurethane aliphatic grade paint of approved RAL colour. The door leaf and frame shall have passed minimum 250 hours of salt spray test. Rate should include supply and installation of door and hardware set. Lead line door Single / double leaf of size Door - 1500 mm x 2100 mm

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and fixing 18mm thick Granite stone work for wall lining upto 10 m height in cement mortar 1:3 (1cement : 3 coarse sand) including pointing with white cement mortor with an admixture of pigment to match the granite shade complete as per direction of Engineer-in-charge.

Providing and fixing 18mm thick pre-polished granite stone strip of any colour and shade 60mm wide with one edge round moulded and polished, fixing the strip in wall above the top of dado, by cutting chase in wall and fixing the same with cement mortar 1:3 (1cement : 3 coarse sand), neatly finished and fixed such that the outer rounded edge projected 20mm beyond the surface of dado , all complete as per direction of engineer-in-charge.

Providing and Fixing of Tarkett Centra-43 or equivalent make, Size: 2mm thick, 2mtrs. x 20mtrs. imported Vinyl Flooring, 100% recycled flexible, homogeneous antistatic calendared compacted floor covering of approved manufacturer, suitable for heavy traffic areas having total weight 3000 g/m2 in sheet of size 2mtrs. x 20 mtrs. In approved pattern & color combination with PUR – patented polyurethane surface treatment with unique performance in staining providing unrivalled chemical and scratching resistance. Having wear resistance of ≤ 4.0mm3 as per EN 660.2 and Wear Resistance Group ‘T’ as per EN and should have a residual indentation of <0.01mm confirming to EN-433. The laid flooring should have Non- directional design, color dyed as a raw mixture to ensure even color throughout the thickness and its surface should be densely compacted for improving wear and ease of maintenance with Anti- bacterial and Fungicidal properties. The joints in the flooring will be sealed by using a PVC welding bar of matching color. The cost is included for Supply and Fixing of Self Leveling Compound (2-3mm approx. thick) all complete as per direction of Engineer-In-Charge.

Supply and Fixing of Tarkett Somwall or equivalent make, 1mm thick, size 2mtrs. X 35mtrs. Imported vinyl wall covering, 100% recycled having total weight 1750 g/m2 in approved pattern & color combination with PUR – patented polyurethane surface treatment with unique performance in staining providing unrivalled chemical and scratching resistance, anti- bacterial and fungicidal properties. all complete as per direction of Engineer-In-Charge.

Providing and laying C.C. pavement (TRIMIX) of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately).

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)

Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-incharge complete. Upto 5mm depth and 5 mm width

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing Single Glazing 6mm thick toughened glass complete in all respects as per direction of the Engineer-in-charge. (Required properties Solar factor ≤ 0.45, U-Value ≤ (W/sq.m-K) 5.7W /M2K, Visible light transmittance ≥ 0.30)

Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment.

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass. d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight. e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places. Note:- 2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories. 6) Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml

Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.“(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2)“For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.“ Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.

Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- in-Charge.

Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 12 mm mild steel U beading

Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck, using integral crystalline admixture @ 0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer’s specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.

Basement Waterproofing for Vertical Surfaces and Retailing Wall Supplying and Installing Proofex3000 manufractured by Fosroc / Chocksey Cehmicals / Dr.Fixit, a selfadhesive, coldapplied, flexible 1.5 mm thick waterproofing membrane by manufacturer approved applicator which comprises of a self adhesive polymer modified bitumen compound with crosslaminated HDPE film. The membrane shall have a premarked minimum 50mm overlap aid available & applied on the uniform surface of the Vertical RCC Wall after application of single component solvent/water based bituminous primer approved & Installed as permanufacturer's recommendation. The rate inclusive of minimum 20mm expanded polystyrene protection board Tierod cutting and grout filling, pipe sleeve joint filling and sealing. The self adhesive membrane Suitable for waterproofing basements grades 2 and 3 as define din BS8102:2009, ‘Protection Of Structures Against Water From The Ground’ basement as per BS8102:2009 and shall be BBA certified andhaving elongation.

Basement Waterproofing for Horizontal Surfaces Providing and installing waterproofing treatment for "Raft 'Slab" by using fully bonded HDPE sheet membrane 1.2mm thick HDPE P manufactured by Fosroc / Chocksey Cehmicals / Dr.Fixit or equivalent before casting of the base RCC slab. The Membrane should be a unique composite sheet comprised of a thick HDPE film, pressure sensitive adhesive and weather resistant protective coating. The membrane shall conforms to basement waterproofing protection to grade 3 as defined in BS 8102:2009.The membrane shall have thickness- : 1.2mm,Tensile strength :27 MPa as per ASTM D412, Elongation (Peak) : 500%, puncture resistance :1000N as per ASTM E154, Peel Adhesion to concrete 880N/m as per ASTM D903, Hydrostatic pressure resistance up to 70 M Head of water as per ASTM D751-06(2011). The cost inclusive of material, application, machinaries required including treatment of Pile Heads using micro-concrete.

Providing and Placing in position suitable PVC water stops for construction/expansion joints between two RCC memberrs and fixed to the reinforfement with binding wire before pouring concrete etc. complete Serrated with central buld (225 mm wide, 8-11 mm thick)

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Waterproofing Treatment for Landscaping Decks/ TerracePolyurethane based waterproofing system for podium and landscape decks.Base preparation 1. Compressed air cleaning has to be done so as to make the surface free of dust, debris, laitance etc. Repairing cracks by cutting and making V-groove in 25x25 mm, with SBR polymer modified mortar , filling the groove with CM(1:3) mixed with SBR latex 10% by weight of cement 2. Providing and making fillets at the junction of the walls and the slabs using cement mortar of 1:4 mix admixed with 5 % of SBR latex by weight of cement. 3. Provide and applying liquid applied,highly permanent elastic,cold applied & cold curing single component PU based waterproofing coating based on pure elastomeric hydrophobic polyurethane resins having resistance to root penetration, Apply 2 [email protected]/sq.mtr to achieve an avergae thickness of 1.2 .The product must have the following technical properties: Elongation at break 400 % as per ASTM D-412, Tensile strength 4 N/mm2 as per ASTM D412, Shore hardness-65 as per ASTM 2240.The coating must be applied over the prepared substrate primed with PU Primer@180-190 gms/sq.mtr. 4. Providing & laying of minimum 150 gsm geotextile layer. 5. Laying of Protection screed of average 75 mm thick in slope using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) grade concrete over geotextile as per recommendations (supply of oncrete in scope of civil contractor) FOR LANDSCAPE AREAS Supply and installation of approved make Rolled Matrix Soil Filter cum surface drainage System as per approved manufacturers specifications. consist of dimple raised, moulded polypropylene sheet bonded to a high strength polypropylene geotextile fabric This geotextile fabric composite allows passage of moisture through fabric while preventing fine soil from entering to drainage channel. all complete as specified and as directed by the Engineer-in-Charge :

Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gsm/sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 x mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum),including factory painted after bending and perforation,and backed with a black Glass fiber acoustical fleece.

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod upto 1000mm length and L-hape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. With 16 mm thick beveled tegular mineral fibre Antimicrobial false ceiling tile confirming to ISO 5 (class 100 ) specifications

Providing & fixing access panel is made out of Moist Bloc (Moisture Resistant) board for opening 600 x 600mm of thickness 12.5mm. All edges of the panel are reinforced with aluminium profiles and corners are guarded with stainless steel 304 grade clips to increase strength and prevent damages. complete in all respect as directed by Engineer-in-charge.

Providing and making 75mm deep suspended feature panel ceiling comprising of 19mm Thk. Commercial Board layered with 4mm Thk. Italian Veneer ply including all edge mouldings, melamine polish, suspension system etc. complete as per drawing & as directed by Engineer-in-charge.

Providing and fixing 300mm wide 1mm thk grade-304, SS Kick plate over flush door with suitable adhesives, screws etc. all complete as per direction of Engineer-In-Charge.

STRETCHER GUARD Providing and fixing Handrails having vinyl snap-on cover(lead free) of 2mm thickness and aluminium retainer of 2mm thickness that shall be fabricated from 6063-T5 aluminium. Dimensions to be of 110mm height x 41mm gripping diameter which has a oval gripping surface II.. The system shall resist an impact of 45.5 ft-lbs as per ASTM F-476-84. The rigid vinyl shall not support fungal or bacterial growth inaccordance with ASTM G-21 and G-22. The system shall also conform to class A fire rating and ASTM D-543 for chemical and stain resistance. It includes Molded end returns and mounting brackets..all complete as per direction of Engineer-In-Charge.

CORNER GUARD Providing and fixing Corner Guards having vinyl snap-on cover(lead free) of 2mm thickness and aluminium retainer of 2mm thickness that shall be fabricated from 6063-T5 aluminium. Dimensions to be of 51mm x 51mm wings and 90 degrees angle. II. The rigid vinyl profile shall resist an impact of 30.2 ft-lbs/inch as per ASTM D-256-90b and shall not support fungal or bacterial growth inaccordance with ASTM G-21 and G-22. The system shall also conform to class A fire rating and ASTM D-543 for chemical and stain resistance. It includes Top Caps. all complete as per direction of Engineer-In-Charge.

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).

Supplying and stacking at site. 90 mm to 45 mm size stone aggregate

Supplying and stacking at site. 63 mm to 45 mm size stone aggregate

Supplying and stacking at site. Stone screening 13.2 mm nominal size (type A)

Supplying and stacking at site. Stone screening 11.2 mm nominal size (type A)

Supplying and stacking at site. Moorum

Laying spreading and compacting stone aggregate of specified sizes to WBM specifications including spreading in uni form thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne in stages to proper grade and camber, applying and brooming requisite type of screening/binding material to fill up interstics of coarse aggregate watering and compacting to the required density.

Surface dressing one coat on new surface with bitumen of specified grade at a rate of 1.95 kg/sqm of surface area with 1.5 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity , etc. complete : Using bitumen emulsion (minimum 50% bitumen content-RS grade conforming to IS : 8887)

Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom. With rapid setting bitumen emulsion On bituminous surface @ 0.25kg/sqm

Providing and laying Bitumen Penetration Macadam with hard stone aggregate of quality, size and grading as specified, with bitumen of suitable penetration grade, including required key aggregate as specified, spreading coarse aggregate with the help of self propelled/tipper tail mounted aggregate spreader and applying bitumen by a pressure distributor and then spreading key aggregate with the help of aggregate spreader complete, including consolidation with road roller of minimum 8 to 10 tonne capacity to achieve specified values of compaction and surface accuracy : For 50mm compacted thickness using coarse aggregate of size 50-20 mm graded @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm graded @ 0.15 cum per 10 sqm. With paving asphalt grade VG - 10 @ 50 kg/ 10 sqm.

Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade VG - 10 and blinding surface with 0.90 cum of stone aggregate of 6.7 mm size (Passing 11.2 mm sieve and retained on 2.36 mm sieve) per 100 sqm of road surface, including rolling and finishing with power road roller all complete. Note: Seal coat items to be operated only with the prior approval of chief Engineer concerned.

Painting runway/taxi track/apron marking with adequate no. of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge i/c cleaning the surface of all dirt, scales, oil, grease and other foreign material etc. and lining out complete. New work (Two or more coats)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50 mm thick compacted of coarse sand, filling the joints with coarse sand etc. all complete as per direction of engineer-in-charge.

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Medium shade pigment using 50% white cement 50% Grey cement

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line ,level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand) including making joints with or without grooves (thickness of joints except sharp curve shall not be more than 5mm) including making drainage opening wherever required complete etc. as per direction of engineer-in-charge(length of finished kerb edging shall be measured for payment).(Precast C.C. kerb stone shall be approved by engineer-in-charge).

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).

Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment).

Supplying and stacking at site dump manure from approved source, including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm

Supplying and stacking at site dump manure from approved source, including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 16 mm

Supplying and stacking at site dump manure from approved source, including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 4.75 mm

Fine dressing of the ground

Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Officer-in-charge (Cost of sludge, dump manure and / or good earth to be paid separately).

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge..

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 60 cm dia, and 60 cm deep.

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 45 cm dia, and 45 cm deep.

Providing and Displaying of Wadelia trilobata plant,full of leaves in 15 cm size of Poly bags & as per direction of the officer-in-charge.

Providing and Displaying of Duranta Golden plant, having ht.15 to 20 cm bushty shape plant with fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge..

Providing and Displaying of Iresine herbstii plant, of height 20-30 cm. full of branches well developed in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.

Supply and stacking of Alstonia scholaris plant of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge.

Supply and stacking of Bauhinia blakeana (Kachnar) plant of height 120-150 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

Supply and stacking of Bombax ceiba plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

Supply and stacking of Grevillea robusta (Silver Oak) plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

Supply and stacking of Kigelia pinnata plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

Supply and stacking of Melia azedarach plant of height 120-135 cm. in big poly bag of size 25cm as per direction of the officer-in-charge.

Supply and stacking of Michelia champa (Golden Champa)plant of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.

Supply and stacking of Putranjiva roxburghii plant of height 90-105 cm. in big polybag of size 25 cm as per direction of the officer-in-charge.

Supply and stacking of plant Jatropha multifida (red colour) of height 60-75 cm. multibranched in p.bag of size 25 cm as per direction of the officer-in-charge.

Supply and stacking of plant Calliandra hybrida of height 105-120 cm., well branched, bushy in big size HDPE bag as per direction of the officer-in-charge.

Supply and stacking of plant Gardenia jasminoides of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge.

Supply and stacking of plant Nerium oleander (kaner) of height 45-60 cm. with 3-4 branches in poly bags of size 20 cm as per direction of the officer-in-charge.

Supply and stacking of Clerodendrum splendens plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.

Supply and stacking of Jasminum grandiflorum (chameli) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. .

PLUMBING WORK Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Indian type W.C Orissa pattern of size 580 x 440 mm C) Jaquar Make I) White

Providing fitting and fixing Vitreous china wall hang water closet (European type W.C pan 400mm high) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) i) Parryware make -White colour (viii) Cascade NXT walvit Pan set (inclusive of seat cover and fittings) (white) (Cat. No. C0207/C8140/C8015)

Providing fitting and fixing Vitreous china wall hang water closet (European type W.C pan 400mm high) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) iii) Jaquar make -White colourr (iii) Aria (Cat.No.ARS-WHT-0110) / Opal (Cat. No.OPS-WHT-0116) (inclusive of seat cover and fittings)

Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) i) Parryware make -White colour iii) Economy Dual Flush (Cat No.C8109)

Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) i) Parryware make -White colour (iv) Deluxe Dual Flush (Cat No.C8110)

Supplying, fiting and fixing concealed cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) (C) Jaquar Make Concealed Cistern (Cat.No.CIB-WHT-31801011X) with Control Plate (CP) (Cat. No. CIS-CHR-31191510X)

Providing and fixing vitreous china flat back type lipped front urinal basin with automatic flushing cistern with standard flush pipe and CP brass spreader and brass unions, etc. complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required. C) Jaquar make Colour - White (i)Urinal (Cat. No.URS-WHT-0704) with Sensor (Cat. No.SNR-CHR-51097)

Supplying fiting and fixing vitreous china division plate including fitting and fixing compete as directed and specified. i. Parry ware make-white (i) Partion Magnum / Large (Cat. No.C0571/07)

Providing vitreous China Wash basin with CI/MS brackets, C.P brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) Basin (without pedestal) Parryware make - While (i) Star Basin 550 x 400 (Cat. No.C0450)

Providing vitreous China Wash basin with CI/MS brackets, C.P brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) Under Counter Basin Parryware make - White (i) Chester 550 x 445 (Cat. No.C8469) (white/coloured)

Providing vitreous China Wash basin with CI/MS brackets, C.P brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) Under Counter Basin Parryware make - White (ii) Oval Range 500 x 400 (Cat. No.C0419) (white)

Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting & making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately. (A) Parryware Make (ii) Single Bowl with Drain Board (400 x 200) Flat Edge - Glossy (Cat.No.C8537)

Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting & making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately. (A) Parryware Make (x) Grace Plain Large (Bowl Size - 560 x 410 x 215) Glossy

Providing fitting & fixing laboratory sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately. Hindware make - White Size 450 x 300 x 180 (Cat.No.50001)

Providing fitting and fixing Decorative Mirror complete as directed and specified. (A) Parryware Make (a) Size 800mm x 600mm

Providing fitting and fixing Decorative Mirror complete as directed and specified. (A) Parryware Make (b) Size 600mm x 450mm

Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. Jaquar Make (a) Continental (Cat.No.ACN-1331N)

Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. Jaquar Make (d) Kubix (Cat. No.AKB-35731)

Providing, fitting, and fixing liquid soap dispenser and liquid soap container complete as specified and directed. Jaquar Make Kubix with glass bottle (Cat. No.AKB-35735)

Providing, fitting and fixing CP towel rail complete as directed and specified. Jaquar Make ii.Continental 600mm (Cat.No. ACN-1111N)

Providing, fitting and fixing CP towel rail complete as directed and specified. Jaquar Make vi. Kubix- Grab bar (300mm long) (Cat.No.AKB-35701)

Providing, fitting and fixing CP towel rail complete as directed and specified. Jaquar Make vii. Kubix (600mm long) (Cat.No.AKB-35711)

Providing, fitting and fixing Chrome Plated robe hook complete as directed and specified. Jaquar Make (i) Continental (Cat.No. ACN-1191N)

Providing, fitting and fixing Chrome Plated robe hook complete as directed and specified. Jaquar Make (iv) Kubix (Cat.No.AKB-35791)

Providing, fitting and fixing Chrome Plated tumbler holder complete as directed and specified. Jaquar Make (iii) Kubix (Cat.No.AKB-35741)

Providing, fitting and fixing Chrome Plated TOILET PAPER holder complete as directed and specified. Jaquar Make (i) Continental toilet paper holder (Cat.No. ACN-1151N)

Providing, fitting and fixing Chrome Plated TOILET PAPER holder complete as directed and specified. Jaquar Make (vii) Kubix toilet roll holder with cover (Cat.No.AKB-35753)

Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified. Jaquar Make (i) 32mm (HT/FT) (Cat.No.ALD-705 / 709)

Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified. Jaquar Make (ii) Bottle trap (with internal partition) 32mm size with 300mm long wall connection pipe (Cat.No. ALD-769B)

Supplying and fitting fixing of electric storage water heater [Geyser] of VENUS/RAMSON/RACOLD/V Guard/ HAIER or equivalent make) including necessary connection etc. as required complete and as directed by the Department. Vertical 15 Litres Capacity

Supplying and fitting fixing of electric storage water heater [Geyser] of VENUS/RAMSON/RACOLD/V Guard/ HAIER or equivalent make) including necessary connection etc. as required complete and as directed by the Department. Vertical 25 Litres Capacity

Supplying and fitting fixing of electric storage water heater [Geyser] of VENUS/RAMSON/RACOLD/V Guard/ HAIER or equivalent make) including necessary connection etc. as required complete and as directed by the Department. Vertical 35 Litres Capacity

INTERNAL DRAINAGE Supplying fitting and fixing PVC pipes of 6Kgf/cm2 (Supreme/Prince) or other ISI approved including joining, fitting and fixing with clamps etc., as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 160mm dia

Supplying fitting and fixing PVC pipes of 6Kgf/cm2 (Supreme/Prince) or other ISI approved including joining, fitting and fixing with clamps etc., as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 110mm dia

Supplying fitting and fixing PVC pipes of 6Kgf/cm2 (Supreme/Prince) or other ISI approved including joining, fitting and fixing with clamps etc., as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 90mm dia

Supplying fitting and fixing PVC pipes of 6Kgf/cm2 (Supreme/Prince) or other ISI approved including joining, fitting and fixing with clamps etc., as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 75mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 160mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. '110mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 90mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 75mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 63mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 50mm dia

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) 200 mm dia.

Supplying fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 160mm dia

Supplying fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. '110mm dia

Supplying fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 90mm dia

Supplying fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 75mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 160mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 110mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 90mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 75mm dia

Supplying fitting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 110mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 110mm dia

Supplying fitting and fixing 45 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 160mm dia

Supplying fitting and fixing 45 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 110mm dia

Supplying fitting and fixing 45 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 90mm dia

Supplying fitting and fixing 45 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 75mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 110mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 90mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 75mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 50mm dia

Supplying fitting and fixing PVC plain single tee of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. '110mm dia

Supplying fitting and fixing PVC plain single tee of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 75mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 110mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 75mm dia

Supplying fitting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 110mm dia

Supplying fitting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 75mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 110mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 75mm dia

Supplying fitting and fixing PVC single 'Y' of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 160mm dia

Supplying fitting and fixing PVC single 'Y' of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 110mm dia

Supplying fitting and fixing PVC single 'Y' of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 75mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 160mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 110mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 75mm dia

Supplying fitting and fixing PVC single 'Y' with door of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 110mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 110mm dia

Supplying fitting and fixing PVC double 'Y' plain of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 110mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 110mm dia

Supplying fitting and fixing PVC coupler of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 110mm dia

Supplying fitting and fixing PVC coupler of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 75mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 110mm dia

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 75mm dia

Supplying fitting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 160mm x 110 mm

Supplying fitting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 110mm x75mm

Supplying fitting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 75mm x 63mm

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 160mm x 110 mm

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 110mm x75mm

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 75mm x 63mm

Supplying fitting and fixing PVC reducing Tee of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 160mm x 110mm

Supplying fitting and fixing PVC reducing Tee of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 110mm x75mm

Supplying fitting and fixing PVC reducing Tee of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 75mm x63mm

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 160mm x 110mm

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 110mm x75mm

Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 75mm x63mm

Supplying fitting and fixing PVC socket plug of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc., in exposed surface or trenches as necessary complete at all levels including below G.L. as directed and specified. 110mm

Supplying fitting and fixing PVC socket plug of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc., in exposed surface or trenches as necessary complete at all levels including below G.L. as directed and specified. 75mm

Supplying fitting and fixing PVC cleaning pipe of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc., in exposed surface of trenches as necessary complete at all levels including below G.L. as directed and specified. 160mm

Supplying fitting and fixing PVC cleaning pipe of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc., in exposed surface of trenches as necessary complete at all levels including below G.L. as directed and specified. 110mm

Supplying fitting and fixing PVC cleaning pipe of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc., in exposed surface of trenches as necessary complete at all levels including below G.L. as directed and specified. 75mm

Providing fitting and fixing 75mm dia. PVC cowel of ISI make complete as directed and specified.

Providing fitting and fixing 110mm dia. PVC cowel of ISI make complete as directed and specified.

Providing fitting and fixing 160mm dia. PVC cowel of ISI make complete as directed and specified.

Providing fitting and fixing C.P.Grating to the floors complete as directed and specified. 110mm dia.

Providing fitting and fixing (150x150)mm PVC top tile strainer complete as directed and specified.

EXTERNAL DRAINAGE Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. Up to a depth of 2.00m below the existing ground level. In Hard/ Dense Soil

Extra over item above for each 1m depth or part thereof beyond the initial depth of 2m

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). In prop 1 cement: 4 sand :8 coarse aggregate by volume

Supplying fitting and fixing PVC pipes of 6Kgf/cm2 (Supreme/Prince) or other ISI approved including joining, fitting and fixing with clamps etc., as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 160 mm dia ((G.T to M.H )

Supplying fitting and fixing PVC pipes of 6Kgf/cm2 (Supreme/Prince) or other ISI approved including joining, fitting and fixing with clamps etc., as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 110 mm dia. ( WC to MH)

Providing and fixing to the inlet mouth of rain water pipe cast iron grating of specified diameter complete as directed and specified. 110mm dia

Providing and fixing to the inlet mouth of rain water pipe cast iron grating of specified diameter complete as directed and specified. 75mm dia

WATER SUPPLY 'Providing fitting and fixing (600x600)mm 90mm thick C.I. Man hole cover and frame of 25 Kg. weight complete as directed and specified

Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc. complete at all levels including below G.L.as directed and specified. Terrace ring main & shaft In exposed surfaces or in trenches. Using Tata (medium) 50mm dia

Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc. complete at all levels including below G.L.as directed and specified. Terrace ring main & shaft In exposed surfaces or in trenches. Using Tata (medium) 40mm dia

Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc. complete at all levels including below G.L.as directed and specified. Terrace ring main & shaft In exposed surfaces or in trenches. Using Tata (medium) 32mm dia

Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc. complete at all levels including below G.L.as directed and specified. Terrace ring main & shaft In exposed surfaces or in trenches. Using Tata (medium) 25mm dia

Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc. complete at all levels including below G.L.as directed and specified. Terrace ring main & shaft In exposed surfaces or in trenches. Using Tata (medium) 20mm dia

Providing and fixing KITEC make Polythene Aluminium - Polythene (PE-AL-PE) Composite Pressure pipes U.V.stabilised with carbon black conforming to ASTM F-1282-1995 for water supply including clamps at 1 metre spacing, cutting and making good the walls etc. In exposed surfaces or in trenches. 1620(20mmOD)pipe

Providing and fixing KITEC make Polythene Aluminium - Polythene (PE-AL-PE) Composite Pressure pipes U.V.stabilised with carbon black conforming to ASTM F-1282-1995 for water supply including clamps at 1 metre spacing, cutting and making good the walls etc. In exposed surfaces or in trenches. 2025(25mmOD)pipe

Providing and fixing KITEC make Polythene Aluminium - Polythene (PE-AL-PE) Composite Pressure pipes U.V.stabilised with carbon black conforming to ASTM F-1282-1995 for water supply including clamps at 1 metre spacing, cutting and making good the walls etc. In exposed surfaces or in trenches. 2532(32mmOD)pipe

Providing and fixing KITEC make Polythene Aluminium - Polythene (PE-AL-PE) Composite Pressure pipes U.V.stabilised with carbon black conforming to ASTM F-1282-1995 for water supply including clamps at 1 metre spacing, cutting and making good the walls etc. In exposed surfaces or in trenches. 3240(40mmOD)pipe

Providing and fixing KITEC make Polythene Aluminium - Polythene (PE-AL-PE) Composite Pressure pipes U.V.stabilised with carbon black conforming to ASTM F-1282-1995 for water supply including clamps at 1 metre spacing, cutting and making good the walls etc. In exposed surfaces or in trenches. 3240(40mmOD)pipe

Providing and fixing KITEC make Polythene Aluminium - Polythene (PE-AL-PE) Composite Pressure pipes U.V.stabilised with carbon black conforming to ASTM F-1282-1995 for water supply including clamps at 1 metre spacing, cutting and making good the walls etc. Concealed by chiselling or breaking brick wall/ C.C / RCC. And making good to the damages. 1620(20mmOD)pipe

Providing and fixing KITEC make Polythene Aluminium - Polythene (PE-AL-PE) Composite Pressure pipes U.V.stabilised with carbon black conforming to ASTM F-1282-1995 for water supply including clamps at 1 metre spacing, cutting and making good the walls etc. Concealed by chiselling or breaking brick wall/ C.C / RCC. And making good to the damages. 2025(25mmOD)pipe

Providing and fixing KITEC make Polythene Aluminium - Polythene (PE-AL-PE) Composite Pressure pipes U.V.stabilised with carbon black conforming to ASTM F-1282-1995 for water supply including clamps at 1 metre spacing, cutting and making good the walls etc. Concealed by chiselling or breaking brick wall/ C.C / RCC. And making good to the damages. 2532(32mmOD)pipe

Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe (A) Exposed or in trenches 20 mm nominal outer dia pipe

Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe (A) Exposed or in trenches 25 mm nominal outer dia pipe

Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe (A) Exposed or in trenches 32 mm nominal outer dia pipe

Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe (A) Exposed or in trenches 40 mm nominal outer dia pipe

Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe (A) Exposed or in trenches 50 mm nominal outer dia pipe

Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe (B) Concealed pipe with cutting chases & making good the walls 20 mm nominal outer dia pipe

Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe (B) Concealed pipe with cutting chases & making good the walls 25 mm nominal outer dia pipe

Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe (B) Concealed pipe with cutting chases & making good the walls 32 mm nominal outer dia pipe

Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe (B) Concealed pipe with cutting chases & making good the walls 40 mm nominal outer dia pipe

Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe (B) Concealed pipe with cutting chases & making good the walls 50 mm nominal outer dia pipe

Supplying fitting and fixing C.P.bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P. pipes will be measured separately) (II) Jaquar Make a) Continental (i) Standard

Supplying fitting and fixing C.P.bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P. pipes will be measured separately) (II) Jaquar Make a) Continental iii.)2-Way bib cock

Supplying fitting and fixing C.P.bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P. pipes will be measured separately) (III) Lauret brand iv.) Long Body Bib Cock with foamflow with wall flange Cat.No.LJK 1104

Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified. (G.I. & C.P. pipes will be measured and paid separately) (II) Jaquar Make a) Continental 15mm dia (Angular stop cock)

Supplying and fitting fixing C.P. Pillar cock of 15mm dia of approved brand as specified and directed. Jaquar Make Continental - pillar cock with areator.

Supplying and fitting fixing C.P. Pillar cock of 15mm dia of approved brand as specified and directed. Jaquar Make Continental -Long neck with areator

Supplying fitting and fixing chrome plated (C.P.) sink cock of approved brand as directed and specified. (G.I & C.P pipes will be measured and paid separately). v) Jaquar Make Continental Sink cock with swinging casted spout

Supplying fitting and fixing Chrome Plated (C.P.) shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately) III. Jaquar Make a) Continental (ii) Shower arm 190mm long heavy casted body with wall flange

Supplying fitting and fixing Chrome Plated (C.P.) shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately) III. Jaquar Make a) Continental (iv)Jaquar make-continental- Overhead shower (ABS chrome plated) with rubit cleaning system

Supplying fitting and fixing Chrome Plated (C.P.) shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately) III. Jaquar Make c) Stealth Rangers (i) Overhead rose shower with revolving joint & 150mm long shower arm with wall flange

Supplying, fitting and fixing Chrome Plated (C.P.) basin mixer complete as directed. Jaquar Make a) Continental / Clarion i) Central hole basin mixer without popup waste system with 450mm long copper pipes and brass nuts Cat No. 167

Supplying , fitting and fixing chrome plated (C.P.) wall mixer complete as directed. Jaquar Make iv) Wall mixer with 115mm long bend pipe 0n lower side Cat No.1119

Supplying, fitting and fixing Chrome Plated (C.P.) sink mixer complete as directed. Jaquar Make Continental/ Clarion Sink mixer with swinging casted spout (wall mounted model) Cat No.309

Supplying, fitting and fixing Chrome Plated (C.P.) divertor of approved brand complete as directed. (II) Jaquar Make c)Stealth Rangers - 4-way divertor for concealed fitting with built in non return valves (For VIP use only. Prior approval of Chief Engineer PWD (Bldg) must be taken before use)Cat No. 21421

Supplying and fitting gun metal country pit valve(full way valve) ISI make as specified and directed. 50mm dia

Supplying and fitting gun metal country pit valve(full way valve) ISI make as specified and directed. 40mm dia

Supplying and fitting gun metal country pit valve(full way valve) ISI make as specified and directed. 25mm dia

Supplying and fitting gun metal country pit valve(full way valve) ISI make as specified and directed. 20mm dia

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed A) G.I. pipe with GI fittings a) TATA / SAIL (Medium) vi) 50mm diameter

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed A) G.I. pipe with GI fittings a) TATA / SAIL (Medium) vii) 65mm diameter

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed A) G.I. pipe with GI fittings a) TATA / SAIL (Medium) viii) 80mm diameter

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed A) G.I. pipe with GI fittings a) TATA / SAIL (Medium) ix) 100mm diameter

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed A) G.I. pipe with GI fittings a) TATA / SAIL (Medium) 'xi) 150mm diameter

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) 32 mm diameter

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) 40 mm diameter

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) 50mm diameter

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) 63mm diameter

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) 75mm diameter

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) 90mm diameter

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) 110mm diameter

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) 160mm diameter

Supplying & Fixing,cast iron body Butterfly Valves with matching flanges, rubber insertion, nuts, bolts and washer etc (IS:13095) of following size complete as reqd. (MAKE:KOLEY/KALPANA/AUDCO) (b) 150 mm dia

Supplying & Fixing,cast iron body Butterfly Valves with matching flanges, rubber insertion, nuts, bolts and washer etc (IS:13095) of following size complete as reqd. (MAKE:KOLEY/KALPANA/AUDCO) (c) 100 mm dia

Supplying & Fixing,cast iron body Butterfly Valves with matching flanges, rubber insertion, nuts, bolts and washer etc (IS:13095) of following size complete as reqd. (MAKE:KOLEY/KALPANA/AUDCO) (d) 80 mm dia

Providing ,Fixing ,Testing & Commissioning of air Release Valve a) 25 mm dia

Supplying fitting and fixing M.S angles, M.S. flat, M.S. bolts and nuts including painting with red lead paint one coat complete as directed. 'M.S. Angles for pipe supporting clamp as per approved pattern drawing.

Supplying fitting and fixing M.S angles, M.S. flat, M.S. bolts and nuts including painting with red lead paint one coat complete as directed. 'M.S. Flats for shaft pipe supporting clamp as per approved pattern drawing.

Supplying fitting and fixing M.S angles, M.S. flat, M.S. bolts and nuts including painting with red lead paint one coat complete as directed. 'M.S. bolts & Nuts

RAIN WATER HARVESTING SYSTEM Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. A. Up to a depth of 2.00m below the existing ground level. b. In Hard/ Dense Soil

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. A. Up to a depth of 2.00m below the existing ground level. B.Extra over item no.1.1(A) above for each 1m depth or part thereof beyond the initial depth of 2m

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). In prop 1 cement: 4 sand :8 coarse aggregate by volume

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness. (i) Using 38mm thick plank

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness. (ii) Using 25mm thick plank

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (d) In proportion 1:6.

Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department. Bore hole of 300mm diameter

Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department. PVC PIPE SUPREME /PRINCE / FUSION /SFMC Brand viii) 200mm diameter

Supplying fitting and fixing ISI approved PVC filter 3.00 metre long. vi) 200mm diameter

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (i) TMT Corrosion resistant steel (CRS) reiforcement bar

TUBEWELLS Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser M15 grade concrete or Prop. 1:2:4

Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd. (Make:Koley/Kalpana/Audco) 80 mm dia

Supplying & Fixing,cast iron body Butterfly Valves with matching flanges, rubber insertion, nuts, bolts and washer etc (IS:13095) of following size complete as reqd. (MAKE:KOLEY/KALPANA/AUDCO) 80 mm dia

Supplying including installation, connection as approved by the Deptt., testing and commissioning of SUBMERSIBLE PUMP SET 3 (Three Phase) with steel cable rope and submersible cable complete as directed and specified by the deptt. Three phase Submersible motor pump set (Texmo / Crompton Greaves/ Aquatic/ CRI/ V-Guar suitable for 100 mm bore well and above. 7.5 HP STAGE 40/ 50 with MCB controlled Submersible motor pump set control panel.

Supplying fitting and fixing including necessary connection as approved by the Deptt.)of Submersible motor pump set control panel including Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) of following capacity as specified and directed by the Department. (Texmo/ Crompton Greaves/ CRI/ Aqua sub make) MCB controlled Submersible motor pump set control panel including Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make)

Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department. Bore hole of 300mm diameter

Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department. G.I. pipe a) TATA / SAIL (Medium) socket should be welded to the pipes. vi) 150mm diameter

Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. A) G.I. pipe a) TATA / SAIL (Medium)socket should be welded to the pipes. vi) 80mm diameter

Supplying fitting and fixing brass Tez filter 2.00 metre long.

Supplying fitting and fixing check valve (non return valve) including thread to pipes. vi) 80mm diameter

Development of the tube well with compressor or by over pumping unit for 48 hours till sand free discharge is obtained.

Flushing, clearing, washing and watering of the tube well.

Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd. (Make:Koley/Kalpana/Audco) 80 mm dia

Supplying & Fixing,cast iron body Butterfly Valves with matching flanges, rubber insertion, nuts, bolts and washer etc (IS:13095) of following size complete as reqd. (MAKE:KOLEY/KALPANA/AUDCO) 80 mm dia

Providing and fixing vitreous china Bed Pan sink, complete with hot and cold mixer tap, 100mm IS 4985 waste connection with solvent cement jointed pipe along deep seal WG "P" trap fitted at floor level including supply of necessary MS angle brackets, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.

Providing fitting and fixing stainless steel SCRUB for OT area with 3 nos Elbow action handle water tap with wall flange, 40mm CP coupling and strainer of same make, SS. Brackets, 40mm CP brass bottle trap heavy duty, cutting and making good the walls and slabs wherever required. Overall size (4000mm long as per approved drawing.)

Providing fitting and fixing stainless steel SCRUB for OT area with 3 nos Elbow action handle water tap with wall flange, 40mm CP coupling and strainer of same make, SS. Brackets, 40mm CP brass bottle trap heavy duty, cutting and making good the walls and slabs wherever required. Overall size (2750mm long as per approved drawing.)

Providing fitting and fixing stainless steel SCRUB for OT area with 3 nos Elbow action handle water tap with wall flange, 40mm CP coupling and strainer of same make, SS. Brackets, 40mm CP brass bottle trap heavy duty, cutting and making good the walls and slabs wherever required. Overall size (1500mm long as per approved drawing.)

Supplying fitting and fixing PVC pipes of 6Kgf/cm2 (Supreme/Prince) or other ISI approved including joining, fitting and fixing with clamps etc., as necessary complete at all levels including below G.L. as directed and specified. Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 40mm dia

Supplying fitting and fixing 45 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. Concealed by chiselling or breaking brick wall / C.C / RCC. And making good to the damages. 40mm dia

Supplying fitting and fixing PVC coupler of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 160mm dia

Supplying fiting and fixing PVC cleanout plug of (Supreme/Prince) or other ISI approved including joining , fitting and fixing Brass female threaded cleanout plug with inset keys to facilitate opening including brass tile mating piece and suitable male PVC adaptor. etc. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. as necessary complete at all levels including below G.L. as directed and specified. 110 mm

Supplying fiting and fixing PVC cleanout plug of (Supreme/Prince) or other ISI approved including joining , fitting and fixing Brass female threaded cleanout plug with inset keys to facilitate opening including brass tile mating piece and suitable male PVC adaptor. etc. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. as necessary complete at all levels including below G.L. as directed and specified. 160 mm

Providing and fixing uPVC P-Trap with extension piece including setting with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 hand stone ballast 20 MM nominal size) the inlet from floor level to trap rim to be grouted and cemented neat manner including cutting and making good the floor & wall wherever requiredcomplete in all respects

Providing and fixing in position 110x63 mm OD uPVC reducing elbow including fix to floor with cement mortar.

Providing and fixing Balcony drain with round plastic grating of 100 mm dia. and 50 mm outlet including setting with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 stone aggregate 20 MM nominal size) including cutting and making good the floor & wall wherever required complete in all respects.

Providing and fixing square-mouth gully trap grade 'A' complete with C.I. grating brick masonry chamber with bricks of class designation 50 and water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50kg and frame to be not less than 2.7 kg as per standard design: 180 x 150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 250 mm dia. R.C.C. pipe

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm dia. R.C.C. pipe

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 450 mm dia. R.C.C. pipe

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 500 mm dia. R.C.C. pipe

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 600 mm dia. R.C.C. pipe

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 700 mm dia. R.C.C. pipe

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 800 mm dia. R.C.C. pipe

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 900 mm dia. R.C.C. pipe

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 1000 mm dia. R.C.C. pipe

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 1200 mm dia. R.C.C. pipe

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90 x 80 cm and 45 cm deep including C.I. cover with frame ( light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38kg ( weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra depth for manholes Size 90 x 80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonary circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1 :3:6 mix (1 cement : 3 coarse sand : 6 graded 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design: 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal diameter confirming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra depth for circular type manhole 0.91m internal dia (at bottom) with beyond 0.91m to 1.67m. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 2.30 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Constructing bricks masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra for depth beyond 45 cm of brick masonry chamber For 455x610 mm size With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing, laying and jointing HDPE Double Wall Coil (DWC) SN-8 Grade pipes confirming to IS: 16098 including all fittings wherever required e.g., tees, bends of any degree, couplings, adapters, plugs, unions etc. and jointing as manufacturer recommondation etc. including testing of joints etc. complete. 200 mm OD

Providing, laying and jointing HDPE Double Wall Coil (DWC) SN-8 Grade pipes confirming to IS: 16098 including all fittings wherever required e.g., tees, bends of any degree, couplings, adapters, plugs, unions etc. and jointing as manufacturer recommondation etc. including testing of joints etc. complete. 250 mm OD

Providing, laying and jointing HDPE Double Wall Coil (DWC) SN-8 Grade pipes confirming to IS: 16098 including all fittings wherever required e.g., tees, bends of any degree, couplings, adapters, plugs, unions etc. and jointing as manufacturer recommondation etc. including testing of joints etc. complete. 315 mm OD

WATER SUPPLY WORKS Providing and fixing health faucet with 1 m long flexible tube and wall hook including all fittings.

Providing and fixing of Single phase electrical actuator operated wafer type rubber lined butterfly valve with by pass arrangement as per drawing attached including level controller, 3 nos. normal butter fly valves,necessary control and Power cables ( Maximum 10 M. Length of each type) and control panel installed on OH tank filling line near the tanks complete in all respects. 32 mm dia.

Providing and fixing of Single phase electrical actuator operated wafer type rubber lined butterfly valve with by pass arrangement as per drawing attached including level controller, 3 nos. normal butter fly valves,necessary control and Power cables ( Maximum 10 M. Length of each type) and control panel installed on OH tank filling line near the tanks complete in all respects. 40 mm dia.

Providing and fixing of Single phase electrical actuator operated wafer type rubber lined butterfly valve with by pass arrangement as per drawing attached including level controller, 3 nos. normal butter fly valves,necessary control and Power cables ( Maximum 10 M. Length of each type) and control panel installed on OH tank filling line near the tanks complete in all respects. 50 mm dia.

Providing and fixing of Single phase electrical actuator operated wafer type rubber lined butterfly valve with by pass arrangement as per drawing attached including level controller, 3 nos. normal butter fly valves,necessary control and Power cables ( Maximum 10 M. Length of each type) and control panel installed on OH tank filling line near the tanks complete in all respects. 65 mm dia.

Supplying, installation, testing and commissioning of skid mounted fully automatic Reverse Osmosis System of output capacity 1500 litres / hour designed at a minimum Flux at inlet complete as required with the following items: Garnet Filter (GF) - 1 No., Media for GF - 1 LOT, Antiscalant Dosing System with level sensors - 1 Lot, Cartridge Filter - 1 No., High pressure pump - 2 Nos (1W + 1St). R.O. Block - 1 No., Membranes - As per manufacturer design, Pressure Tubes - 1 No., RO skid - 1 No., pH correction system - 1 No., Necessary instruments - 1 Lot, Interconnecting pipe with necessary valve work - 1 Lot, PVC (upto HP Pump) - 1 Lot, SS (HP Pump to Membrane) - 1 Lot, Pressure gauges - 5 Nos., Rotameter - 2 Nos., PPLC cum instrument panel - 1 No., Conductivity Indicator - 1 No., Level sensors (Antiscalent Tank) - H/L, Level sensors (Permeate Tank) - H/L, Solenoid Valve (Inlet) to R.O. tank - 1 No., Solenoid Valve (Reject) - 1 No. The reverse osmosis block shall be duly supplemented with adequate pretreatment and post treatment equipmnet such as filter sodium metabisulphate dosing, anti-scalant dosing and post RO treatment pH correction dosing etc. in line with the raw water characteristics and the required treated water parameters. The plant should consist of the following automation: The plant starts when the level at R.O. water storage tank is low and stops when the level at R.O. water storage tank is high. When the level is low, the raw water pump starts. High pressure pumps starts after two minutes of starting of raw water pump. The reject valve closes after 1 minute of starting of high pressure pump. If the pressure at high pressure pumps suction is low / high, the plant trips. When the plant stops due to high level, first the high pressure pump stops and the dump valves opens, after two minutes the raw water pumps and dosing pump stops. When the connectivity is high an alarm is given. The MIMIC provides indications for all the I/Ps and the respective O/Ps. R.O. plant as described above

Supply, installation, testing and commissioning of stainless steel R.O water storage tank (SS 316) with minimum thickness of shell is 3 mm and base is 3 mm placed at terrace level with inlet, outlet, overflow connection complete with 25 mm dia bend for vent, ball valve for scour, mosquito proof brass overflow grating and 450 mm dia manhole cover with locable arrangment completeas per direction of Project Manager. 5000 Litres Capacity

Providing and fixing threaded end brass digital water meter complete in all respect. 32 mm dia.

Providing and fixing threaded end brass digital water meter complete in all respect. 40 mm dia.

Providing and fixing threaded end brass digital water meter complete in all respect. 50 mm dia.

Providing and fixing threaded end brass digital water meter complete in all respect. 65 mm dia.

Providing and fixing Thermoflex or Kaiflex thermal insulation tubing a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including all required accessories complete as per specification. 6 mm thick (Concealed Pipes) For 20 mm dia Pipe

Providing and fixing Thermoflex or Kaiflex thermal insulation tubing a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including all required accessories complete as per specification. 6 mm thick (Concealed Pipes) For 25 mm dia Pipe

Providing and fixing Thermoflex or Kaiflex thermal insulation tubing a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including all required accessories complete as per specification. 6 mm thick (Concealed Pipes) For 32 mm dia Pipe

Providing and fixing Thermoflex or Kaiflex thermal insulation tubing a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including all required accessories complete as per specification. 6 mm thick (Concealed Pipes) For 40 mm dia Pipe

Painting G.I. Pipes and fitting with synthetic enamel white paint over a ready mixed priming coat, both of approved qualtiy for new work. 20mm dia

Painting G.I. Pipes and fitting with synthetic enamel white paint over a ready mixed priming coat, both of approved qualtiy for new work. 25mm dia

Painting G.I. Pipes and fitting with synthetic enamel white paint over a ready mixed priming coat, both of approved qualtiy for new work. 32mm dia

Painting G.I. Pipes and fitting with synthetic enamel white paint over a ready mixed priming coat, both of approved qualtiy for new work. 40mm dia

Painting G.I. Pipes and fitting with synthetic enamel white paint over a ready mixed priming coat, both of approved qualtiy for new work. 50mm dia

Painting G.I. Pipes and fitting with synthetic enamel white paint over a ready mixed priming coat, both of approved qualtiy for new work. 65mm dia

Painting G.I. Pipes and fitting with synthetic enamel white paint over a ready mixed priming coat, both of approved qualtiy for new work. 80mm dia

Painting G.I. Pipes and fitting with synthetic enamel white paint over a ready mixed priming coat, both of approved qualtiy for new work. 100mm dia

Painting G.I. Pipes and fitting with synthetic enamel white paint over a ready mixed priming coat, both of approved qualtiy for new work. 150mm dia

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality H D - 20 Circular shape 560 mm internal diameter

Supplying, filling, spreading & levelling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & levelling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & levelling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer –in-charge.

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp.

TUBEWELLS (NSR) Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 150 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm dia

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 150 mm dia

HOT WATER SYSTEM ( HEAT PUMPS) Supply, installation , testing & commissioning of Micro Processor Controlled air cooled Heat pump delivering actual capacity as per the following parameters duly installed at site. Heat pumps shall be rated at 10.3 KW of input power and 38 KW of output power. Refrigerant used should be environment friendly R-410a. Heat pump should heat water upto 55⁰C on heat pump mode. It shall have silent operation and the sound level should not exceed 65 dB. Refrigerent R-410a/6.2 kg (Refrigerant) Heat Pump as described above Nominal Input Power - 10.3 KW Output Heating capacity - 38 kW Heat pump shall have LCD display control panel with built in diagnostic and troubleshooting information Heat pump should have an inbuilt cycle for defrosting in case icing occurs on evaporator. with inbuilt tube in tube type heat exchanger. All other mounting ,fitting and controls Suitable for electric supply of 380 +/- 10 % volts & 3N~ 50 hz All interconnecing wiring/cabling between heat pump and electric panel & control valves, NRV, Piping etc complete. The heat pump shall have an in-built facility to start /stop depending on variation in demand at different periods.

Design, Supply, installation, testing & commissioning of SS 316 horizontal hot water storage tank with 4 mm thicness suitable for minimum 5 Kg /Sqm working pressure. Tank shall be provided with water flow meter at inlet (approved by department of weights and measures), inlet / outlet, overflow / drain connection with MH cover 6 mm thick SS tank, pressure relief valves, pressure gauge at inlet / outlet with isolation cock, thermometer at inlet / outlet. All the valves & accessories shall be suitable for an operating pressure of 5 Kg/sq.cm. Tank shall be insulated with 100 mm thick glass wool / rock wool insulation 80 kg/m2 density, including 24 gauge aluminium cladding. Tank shall provided with 15 mm dia testing spout with valve (inlet temperature to hot water storage tank 60-65 deg.C). The flanges shall be machined from SS-316 sheets with dimensions confirming to ANSI, B 16.5 No. 150. The nozzles shall be SS pipes. (Tank shall be fabricated as per unfired pressure vessel code IS 2825-1969, IS 226 / IS 2062). 5000 Litres Capacity

Supply, installation , testing & commissioning of following pumps suitable for 415 Volts connected with T.E.F.C. induction motor, M.S.channel, base plate complete with vibration isolators, isolating valve on suction and discharge, non return valve on discharge, pressure gauges with stop cock and dial type thermometer on suction or discharge. The pump shall have mechanical seal. The pump shall be SS casing, impeller, shaft and CI (Epoxy coated) base & EPDM Mechanical seal (suitable for hot water temperature up to 85 deg C.) including Valves, NRV, Strainers, Pressure Gauge, Thermometer & Cabling etc. complet in all respects. Hot Water circulation Pumps in Heat pump and tank. (For 38 KW Heat Pump) Pump (2 Nos. 1W+1SB) Flow - 6.5m3/hr Head - 25 mtrs

Supply, installation , testing & commissioning of following pumps suitable for 415 Volts connected with T.E.F.C. induction motor, M.S.channel, base plate complete with vibration isolators, isolating valve on suction and discharge, non return valve on discharge, pressure gauges with stop cock and dial type thermometer on suction or discharge. The pump shall have mechanical seal. The pump shall be SS casing, impeller, shaft and CI (Epoxy coated) base & EPDM Mechanical seal (suitable for hot water temperature up to 85 deg C.) including Valves, NRV, Strainers, Pressure Gauge, Thermometer & Cabling etc. complet in all respects. Hot Water Return Pumps Pump (2 Nos. 1W+1SB) Flow - 1.0 LPS Head - 18-20 mtrs

WATER SUPPLY, DRAINAGE PUMPS & WATER TREATMENT EQUIPMENTS Supply, installation, testing & commissioning of vertical inline multistage pumping set (Imported) with Stainless steel body, impeller, casing, shaft and C.I. base & head with mechanical seal, connected to a TEFC induction motor suitable for 415+/- 10% volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundations, Control Valves, Non return Valves,80x40 mm I section base plate bolted to cement concrete foundations complete.Vendor to submit performance curves and technical catalogue of the proposed model for review and information. Filter Feed Pump ( Dom. Water) at Water Supply Pump Room) Set of Two Pumps ( 1 Working+ 1 Standby) Capacity 9.0 LPS Head 25 M. HP 5.0 HP Approxi.

Supply, installation, testing & commissioning of vertical inline multistage pumping set (Imported) with Stainless steel body, impeller, casing, shaft and C.I. base & head with mechanical seal, connected to a TEFC induction motor suitable for 415+/- 10% volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundations, Control Valves, Non return Valves,80x40 mm I section base plate bolted to cement concrete foundations complete.Vendor to submit performance curves and technical catalogue of the proposed model for review and information. Raw Water Transfer Pump to STP at Pump Room Set of Two Pumps ( 1 Working+ 1 Standby) Capacity 6.0 LPS Head 25 M. HP 3.0 HP Approxi.

Providing, installing, testing and commissining of variable speed (VSPS) hydropneumatic system mounted on a common base plate comprising of vertical centrifugal pumping set with S.S body, stainless steel impeller and mechanical seal, shaft directly coupled to a TEFC induction motor suitable for 400/440 volts, 3 phase, 50 cycles AC supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, one No. microprocessor based controller, dedicated variable frequency drive for each pump, one No.remote sensors, pressure transducers, sequence running cotroller, dry running Protection,motor control centre, necessary power and control cabling from MCC to pumps including required rating of MCB, one No. 60 litre capacity M.S diaphragam tank with interchangeable butyl rubber membrane,complete in all respects, including stainless steel grade 316 pipe suction and delivery headers and isolation/ control valves( ball valves/butterfly valves/ Nan return valves/ vibration eliminators etc as required) , power box, equipped with fuses/ isolators/circuit breakers as required. The entire Hydropneumatic system shall be factory fitted. Hyd. System for Domestic Water Supply at Pump Room Set of Three Pumps ( 2 Working+ 1 Standby) Capacity 6.0 LPS Head 60 M. HP 7.5 HP Approxi.

Providing, installing, testing and commissining of variable speed (VSPS) hydropneumatic system mounted on a common base plate comprising of vertical centrifugal pumping set with S.S body, stainless steel impeller and mechanical seal, shaft directly coupled to a TEFC induction motor suitable for 400/440 volts, 3 phase, 50 cycles AC supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, one No. microprocessor based controller, dedicated variable frequency drive for each pump, one No.remote sensors, pressure transducers, sequence running cotroller, dry running Protection,motor control centre, necessary power and control cabling from MCC to pumps including required rating of MCB, one No. 60 litre capacity M.S diaphragam tank with interchangeable butyl rubber membrane,complete in all respects, including stainless steel grade 316 pipe suction and delivery headers and isolation/ control valves( ball valves/butterfly valves/ Nan return valves/ vibration eliminators etc as required) , power box, equipped with fuses/ isolators/circuit breakers as required. The entire Hydropneumatic system shall be factory fitted. Hyd. System for Irrigation Water Supply at STP Pump Room Set of Two Pumps ( 1 Working+ 1 Standby) Capacity 4.0 LPS Head 50 M. HP 5.0 HP Approxi.

Providing, installing, testing and commissining of variable speed (VSPS) hydropneumatic system mounted on a common base plate comprising of vertical centrifugal pumping set with S.S body, stainless steel impeller and mechanical seal, shaft directly coupled to a TEFC induction motor suitable for 400/440 volts, 3 phase, 50 cycles AC supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, one No. microprocessor based controller, dedicated variable frequency drive for each pump, one No.remote sensors, pressure transducers, sequence running cotroller, dry running Protection,motor control centre, necessary power and control cabling from MCC to pumps including required rating of MCB, one No. 60 litre capacity M.S diaphragam tank with interchangeable butyl rubber membrane,complete in all respects, including stainless steel grade 316 pipe suction and delivery headers and isolation/ control valves( ball valves/butterfly valves/ Nan return valves/ vibration eliminators etc as required) , power box, equipped with fuses/ isolators/circuit breakers as required. Hyd. System for Flushing Water Supply at STP Pump Room Set of Two Pumps ( 1 Working+ 1 Standby) Capacity 6.0 LPS Head 60 M. HP 7.5 HP Approxi.

Supply, installing, testing and commissining of fixed speed hydropneumatic system mounted on a common base plate comprising of vertical inline multistage pumping set with Stainless steel-304 body, Stainless steel-304 impeller, Stainless steel-304 casing, shaft of Stainless steel-316 and C.I. base & head with mechanical seal, shaft directly coupled to a TEFC induction motor suitable for 400/440 volts, 3 phase, 50 cycles AC supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, dry running Protection,motor control centre, necessary power and control cabling from MCC to pumps including required rating of MCB, one No. 60 litre capacity M.S diaphragam tank with interchangeable butyl rubber membrane,dual type pressure switch, complete in all respects including suction and delivery headers of Stainless steel-316 grade pipe of required dia, isolation valves, NRV of PN-25 grade & vibration eliminators on both suction & delivery side of pumps,power box, equipped with fuses/ isolators/circuit breakers as required. For Domestic Water Supply at Hospital Terrace Level Set of Two Pump (1 Working + Standby ) Capacity - 5.0 LPS Head - 20.0 M. H.P. - 3.0 HP (Approx.)

Supply, installing, testing and commissining of fixed speed hydropneumatic system mounted on a common base plate comprising of vertical inline multistage pumping set with Stainless steel-304 body, Stainless steel-304 impeller, Stainless steel-304 casing, shaft of Stainless steel-316 and C.I. base & head with mechanical seal, shaft directly coupled to a TEFC induction motor suitable for 400/440 volts, 3 phase, 50 cycles AC supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, dry running Protection,motor control centre, necessary power and control cabling from MCC to pumps including required rating of MCB, one No. 60 litre capacity M.S diaphragam tank with interchangeable butyl rubber membrane,dual type pressure switch, complete in all respects including suction and delivery headers of Stainless steel-316 grade pipe of required dia, isolation valves, NRV of PN-25 grade & vibration eliminators on both suction & delivery side of pumps,power box, equipped with fuses/ isolators/circuit breakers as required. For Domestic Water Supply at Housing , Hostels & Director Residence at Terrace Level Set of Two Pump (1 Working + Standby ) Capacity - 3.5 LPS Head - 20.0 M. H.P. - 2.0 HP (Approx.)

Supply, installing, testing and commissioning of submersible open impeller non-clog pumps with C.I.body and to TEFC submersible motor for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphragm and bend, vertical discharge pipe, guide pipe and chain in built level controller, sequence running controller, arrangement for both pumps together inacase of emenegency, audible hooter for failure or flooding, dry running Protection, control valves, Non return valves complete in all respects., painting, testing and commissioning complete with approved quality and make as required as per instruction of site incharge. (Pumps shall be installed in a set of two pumps One working and One standby) Basement Pump Room Drainage Sump Pumps (Pumps to be suitable to handle solids upto 30 mm size) Capacity - 4.0 LPS (Each) Head - 15 M H.P. - 1.5 HP Approx.

Supply, installing, testing and commissioning of submersible open impeller non-clog pumps with C.I.body and to TEFC submersible motor for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphragm and bend, vertical discharge pipe, guide pipe and chain in built level controller, sequence running controller, arrangement for both pumps together inacase of emenegency, audible hooter for failure or flooding, dry running Protection, control valves, Non return valves complete in all respects., painting, testing and commissioning complete with approved quality and make as required as per instruction of site incharge. (Pumps shall be installed in a set of two pumps One working and One standby) Sewage Sump Pumps (Pumps to be suitable to handle solids upto 40 mm size) Capacity - 4.0 LPS (Each) Head - 15 M H.P. - 2.0 HP Approx.

Supply Installation,Testing & Commissioning of vertical self supporting Filter fabricated from MS sheet as per IS: 2825, ((minimum thickness of shall 6 mm and dished end 8 mm)) pressure gauges, sample cock, GI class 'C' face piping, CI butterfly valves and all accessories , with initial charge of filter media including anthracite, painting inside with epoxy paint and outside with two coat of red oxide primer and two or more coat of synthetic enamel paint, testing and commissioning complete. Dual Media Filter For Domestic Water Supply Capacity- 32400 LPH Filtration rate- 14000 LPH/Sqm. Filter dia approx. - 1750 MM Working pressure: 3.0 Kg/sq cm. Test pressure : 4. 5 Kg/sq cm

Supply Installation,Testing & Commissioning of vertical self supporting Filter fabricated from MS sheet as per IS: 2825, ((minimum thickness of shall 6 mm and dished end 8 mm)) pressure gauges, sample cock, GI class 'C' face piping, CI butterfly valves and all accessories , with initial charge of filter media including anthracite, painting inside with epoxy paint and outside with two coat of red oxide primer and two or more coat of synthetic enamel paint, testing and commissioning complete. Activated Carbon Filter For Domestic Water Supply Capacity- 32400 LPH Filtration rate- 14000 LPH/Sqm. Filter dia approx. - 1750 MM Working pressure: 3.0 Kg/sq cm. Test pressure : 4. 5 Kg/sq cm

Supply Installation,Testing & Commissioning of "Cation" ion exchange Water Softener fabricated from MS plate as per IS: 2825 (minimum thickness of shall 6 mm and dished end 8 mm) complete with initial charge of resins , GI class 'C' face piping, CI butterfly valves, pressure gauge, hydraulic brine injector, accessories, painting inside with epoxy paint, including 500 liters capacity PVC / HDPE brine tank suitable for 2 regeneration capacity, testing and commissioning complete with resins of approved quality and make. For Domestic Water Supply Hardness- Inlet- 500-600 PPM Outlet- 70-100 PPM Capacity- 32400 LPH Regeneration period 12 hrs. Quantity of soft water Quantity of soft water between two regenerations = 388800 lit Working pressure: 3.0 Kg/sq cm. Test pressure : 4. 5 Kg/sq cm

Supply Installation,Testing & Commissioning of metering pump type chemical doser with 100 lits. HDPE chemical grade solution tank,injection fitting assembly,suction and delivery hose upto the point of injection, capacity 0-6 lph, complete in all respects. Chlorination of Domestic Water

Supplying, installing, testing and commissioning controllers with low voltage relays, stainless steel probes and PVC shroud wiring from tank top to problems of required. For Water Supply Pump: To start pump when water level is low in Domestic Water U.G. tank and shut off pump when Domestic Water U.G. tank is full. Also to stop when water level is low in raw water underground tank.

Supplying, installing, testing and commissioning controllers with low voltage relays, stainless steel probes and PVC shroud wiring from tank top to problems of required. For Sump Pumps: To start pump when water level is high in sump and shut off pump when sump is empty. Both pumps are start when sump is over flowing.

Providing and fixing resilient rubber neoprene lined style arch vibration eliminators suitable for raw water upto 45 deg.C. Temperature working pressure upto 25 Kg/Sqcm. 50 mm dia

Providing and fixing resilient rubber neoprene lined style arch vibration eliminators suitable for raw water upto 45 deg.C. Temperature working pressure upto 25 Kg/Sqcm. 65 mm dia

Providing and fixing resilient rubber neoprene lined style arch vibration eliminators suitable for raw water upto 45 deg.C. Temperature working pressure upto 25 Kg/Sqcm. 80 mm dia

Providing and fixing heavy duty armoured cables 1.1 KVA grade including necessary support clamps at ceiling level and connection lugs complete in all respects. Power cable Copper 3 core 10 sq.mm

Providing and fixing heavy duty armoured cables 1.1 KVA grade including necessary support clamps at ceiling level and connection lugs complete in all respects. Power cable Copper 3 core 6 sq.mm

Providing and fixing heavy duty armoured cables 1.1 KVA grade including necessary support clamps at ceiling level and connection lugs complete in all respects. Power cable Copper 3 core 4 sq.mm

Providing and fixing heavy duty armoured cables 1.1 KVA grade including necessary support clamps at ceiling level and connection lugs complete in all respects. Control cable copper 2 core 1.5 sq.mm

Design, Supplying, installing, testing & commissioning of fully automatic Sewage Treatment Plant of 400 KLD & 40 KLD Effluent Treatment Plant including all Electro Mechanical equipments but excluding all civil works, for the following duty: Nature of effluent - Domestic Sewage from toilet, kitchen waste water, domestic Laundry waste (if any) shall be discharged into the STP. Design to take consideration of same. INLET SEWAGE EFFLUENT CHARACTERSTICS (Typical) pH - 6.5 – 8.5 BOD - 500 Mg/L S. Solids - 250 Mg/L COD - 750 Mg/L Oil & Grease - 50 Mg / L (after oil and grease trap) DISCHARGE EFFLUENT CHARACTERSTICS AFTER TREATMENT: should conform to latest CPCB norms Influent to ETP will be from Lab washing and OT washing

FIRE FIGHTING SYSTEM Providing,Fixing, testing &Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE)

Providing controlled percolating (C.P.) hose ISI Marked (IS:8423) 63 mm dia X 15 M long complete with instantaneous type Gun Metal 63 mm dia ISI Marked male & female couplings (IS:903) bound & riveted to hose pipes with copper rivets and copper wire complete as required. (MAKE: NIRMAL RUBBER/NEWAGE)

Providing RRL Hose with ISI Marked (IS:636) 63 mm dia X15 M long complete with instantaneous type Gun Metal 3 mm dia ISI Marked male & female couplings (IS:903) bound & riveted to hose pipes with copper rivets and copper wire complete as reqd. ( MAKE: NIRMAL RUBBER/NEWAGE)

Providing & fixing of weather proof hose cabinets fabricated from 16 S.W.G. M.S. Sheet with centre opening full front glass door and locking arrangement, suitable to accommodate one landing valve (Yard Hydrant ), 2nos.15M long hoses and 1 no. Branch pipe with nozzle . The cabinet shall be painted with one coat of primer and 2 or more coats of synthetic enamel paint of approved make & shade and shall be suitably mounted on a raised masonry platform complete as reqd.(Make:self Fabricated) a) 900X600X450

Providing & fixing of weather proof hose cabinets fabricated from 16 S.W.G. M.S. Sheet with centre opening full front glass door and locking arrangement, suitable to accommodate one landing valve (Yard Hydrant ), 2nos.15M long hoses and 1 no. Branch pipe with nozzle . The cabinet shall be painted with one coat of primer and 2 or more coats of synthetic enamel paint of approved make & shade and shall be suitably mounted on a raised masonry platform complete as reqd.(Make:self Fabricated) b) 2000 X 1200 X450

Providing & Fixing of Gun Metal 63 mm dia Short Branch Pipe with 20 mm dia nozzle, ISI marked (IS:903) complete as required. (Make: ESSEL/WINCO/NEWAGE).

Providing & Fixing of Gun Metal fire Brigade Connection (inlet collection head) consisting of 63mm instantaneous type male coupling with built in check valves and 150 mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904-1983 complete as reqd. MAKE: ESSEL/WINCO/NEWAGE a) 02 way

Providing & Fixing of Gun Metal fire Brigade Connection (inlet collection head) consisting of 63mm instantaneous type male coupling with built in check valves and 150 mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904-1983 complete as reqd. MAKE: ESSEL/WINCO/NEWAGE b) 04 way

Providing & Fixing of Weather Proof M.S. Cabinet (to enclose above Inlet Collection Head Connection) fabricated from 16 S.W.G. M.S. sheet centre opening with 3 mm thick full front glass door and locking arrangement duly painted with one coat of primer and two or more coasts of synthetic enamel paint of appreoved make and shade and suitably mounted. Exact size and shape shall be subject to site conditions and prior approval. (Make:Self Fabricated)

Providing & fixing of Gun Metal fire Brigade suction hose coupling (draw out connection) with nut for female coupling as per IS:902-1974 complete with 150 mm dia GI suction pipe and foot valve (to be connected to static Tank) complete as reqd.(Make: Self Fabricated)

Providing & fixing of Weather Proof M.S. cabinet (to enclose above draw out connection) fabricated from 16SWG M.S. sheet centre opening with 3mm thick full front glass door and locking arrangement duly painted with one coat of primer and two or more coats of synthetic enamel paint of appreoved make and shade and sutable mounted . Exact size and shape shall be subject to site conditions and prior approval) (Make: Self Fabricated)

Providing ,Fixing ,Testing & Commissioning of air Release Valve a) 25 mm dia

Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required. (Make:TATA/JINDAL/NEZONE) a) 200 mm dia

Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required. (Make:TATA/JINDAL/NEZONE) b) 150 mm dia

Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required. (Make:TATA/JINDAL/NEZONE) c) 100 mm dia

Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required. (Make:TATA/JINDAL/NEZONE) d) 80 mm dia

Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required. (Make:TATA/JINDAL/NEZONE) e) 65 mm dia

Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required. (Make:TATA/JINDAL/NEZONE) f) 50 mm dia

Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required. (Make:TATA/JINDAL/NEZONE) g) 40 mm dia

Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required. (Make:TATA/JINDAL/NEZONE) h) 32 mm dia

Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required. (Make:TATA/JINDAL/NEZONE) i) 25 mm dia

Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc.complete with all fittings (butt welded) viz flanges, bends, tees, elbows, reducers etc including excavation (upto 1.5 m Deep), back filling and removal of surplus soil & providing anti corrosive treatment(coating and wrapping) as per IS:10221 with 4 mm thick tape complete as reqd. (MAKE:TATA/JINDAL/NEZONE) b) 150 mm dia

Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc.complete with all fittings (butt welded) viz flanges, bends, tees, elbows, reducers etc including excavation (upto 1.5 m Deep), back filling and removal of surplus soil & providing anti corrosive treatment(coating and wrapping) as per IS:10221 with 4 mm thick tape complete as reqd. (MAKE:TATA/JINDAL/NEZONE) c) 100 mm dia

Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc.complete with all fittings (butt welded) viz flanges, bends, tees, elbows, reducers etc including excavation (upto 1.5 m Deep), back filling and removal of surplus soil & providing anti corrosive treatment(coating and wrapping) as per IS:10221 with 4 mm thick tape complete as reqd. (MAKE:TATA/JINDAL/NEZONE) d) 80 mm dia

Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd. (Make:Koley/Kalpana/Audco) (a) 150 mm dia

Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd. (Make:Koley/Kalpana/Audco) (b) 100 mm dia

Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd. (Make:Koley/Kalpana/Audco) (c) 80 mm dia

Supplying & Fixing,cast iron body Butterfly Valves with matching flanges, rubber insertion, nuts, bolts and washer etc (IS:13095) of following size complete as reqd. (MAKE:KOLEY/KALPANA/AUDCO) (a) 200 mm dia

Supplying & Fixing,cast iron body Butterfly Valves with matching flanges, rubber insertion, nuts, bolts and washer etc (IS:13095) of following size complete as reqd. (MAKE:KOLEY/KALPANA/AUDCO) (b) 150 mm dia

Supplying & Fixing,cast iron body Butterfly Valves with matching flanges, rubber insertion, nuts, bolts and washer etc (IS:13095) of following size complete as reqd. (MAKE:KOLEY/KALPANA/AUDCO) (c) 100 mm dia

Supplying & Fixing,cast iron body Butterfly Valves with matching flanges, rubber insertion, nuts, bolts and washer etc (IS:13095) of following size complete as reqd. (MAKE:KOLEY/KALPANA/AUDCO) (d) 80 mm dia

Providing ,Fixing,Testing & Commissioning of G.M. Stop Valve ISI Marked screwed type tested to 30Kg/cm2 pressure as per IS:778-1984 of following sizes complete as reqd. (a) 50 mm dia

Providing ,Fixing,Testing & Commissioning of G.M. Stop Valve ISI Marked screwed type tested to 30Kg/cm2 pressure as per IS:778-1984 of following sizes complete as reqd. (b) 25 mm dia

Providing, erection testing, Commissioning of Cast Iron Foot Valve/Stainer confirming to IS:4038/1538 complete with flanges, nuts, bolts and washer etc as required (a) 200 mm dia

Providing, erection testing, Commissioning of Cast Iron Foot Valve/Stainer confirming to IS:4038/1538 complete with flanges, nuts, bolts and washer etc as required (b) 150 mm dia

Providing,erection testing & commissioning of pressure gauge 100 mm dia (0-10Kg/cm2)

Providing ,erection,Testing & Commissioning of Pressure Switch (MAKE:INDFOSS)

Supplying, Installation,Testing & Commissioning of 15 mm dia quartzoid Bulb Type G.M. Sprinkler Head sutable to operate at 68* C complete as reqd.(UL/FM/LPC listed/Approved) (Make : HD Fire / TYCO)

Supply,installation,testing & commissioning of 150 mm dia installation control valve assembly comprising of vertical wet alarm valve, hydraulic alarm motor & gong, 15 mm dia Test Valve, 50 mm dia , Drain Valve and all necessary trimming connections including 02 nos. pressure gauge as per manufacturers catalogue complete as reqd.(UL/FM/LPC Listed/Approved) (Make : HD FIRE )

Supplying and laying of following size NP2 class RCC Hume pipe i/c collars jointed with stiff mixture of cement morter 1:2 ( 1 cement:2 fine sand) across the road including cutting the road ( if reqd) digging the trench, refilling the same after laying pipe, ramming the soil etc as reqd. (a) 400 mm dia

Supplying and laying of following size NP2 class RCC Hume pipe i/c collars jointed with stiff mixture of cement morter 1:2 ( 1 cement:2 fine sand) across the road including cutting the road ( if reqd) digging the trench, refilling the same after laying pipe, ramming the soil etc as reqd. (b) 300 mm dia

Supplying, Installation, Testing & Commissioning of First Aid Hose reel drawn with 30 Mtrs. Long rubber hose and G.M shut off nozzle, 25mm dia Gate valve, Union pipe complete set confirming to IS: 884.

Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI Mark, and CO2 Cylinder will be confirming to IS: 4947 with ISI Mark, Powder will be confirming to IS: 2878 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(25 KG) BRAND : FIRESTOP / FIREND / FIRE SHIELD

Supply, Installation, Fixing of MECHANICAL FOAM (AFFF) Fire Extinguisher confirming to IS: 10204 with ISI Mark and CO2 Cartridge will be confirming to IS: 4947 with ISI mark, (AFFF) will be confirming to IS: 4989 with ISI Mark.(50 LITERS) BRAND : FIRESTOP / FIREND / FIRE SHIELD

Supply, Installation, Fixing of CARBON DIOXIDE Fire Extinguisher confirming to IS: 2878 with ISI Mark.(4.5 LITERS) BRAND: FIRESTOP / FIREND / FIRESHIELD

Supply, Installation, Fixing of ABC Stored Pressure Fire Extinguisher with built – In pressure Gauge to know the Ready ness of the Extinguisher Squeeze Grip Handle As per IS:13849 with ISI mark (05 kg capacity) BRAND : FIRESTOP / FIREND / FIRE SHIELD

Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered with anti vibration pads. Suitable cement concrete foundation duly plastered with anti vibration pads. Main Electric Pump 2850 LPM at 88 m Head

Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered with anti vibration pads. Suitable cement concrete foundation duly plastered with anti vibration pads. Water Curtain Pump 2280 LPM 56 M. Head

Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered with anti vibration pads. 2850 LPM at 88 m Head

Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered with anti vibration pads. 180 LPM at 88 m Head

Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)+Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520+Suitable HP squirell cage induction motor TEFC typesuitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 900 LPM at 35 m Head

Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)+Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520+Suitable HP squirell cage induction motor TEFC typesuitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 450 LPM at 35 m Head

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.

Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required. 150 mm dia.

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. - 700mm

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. - 1000mm

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. - 1200mm

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. - 1500mm

Supplying, installation, testing & commissioning of deluge valve (to be used for water curtains) UL listed with wet pilot basic trim assembly for DVA with test and alarm, drip and drain valve with water motor gong complete as required.- 150 mm dia.

Providing, installation, testing & commissioning of water curtain nozzle 15mm dia nickel chrome plated brass, BSPT, K-factor as per design consideration complete as required.

Providing, installation, testing & commissioning of electric release trim assembly for deluge wall with two way solelnoid valve, weather proof operation on 24 volts DC supply complete as required.

Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required.

Providing and fixing resilient rubber neoprene lined single arch vibration eliminators with unit control suitable for raw water upto 450C temperature working pressure 25 kg and test pressure 37.5 kg/cm2. - 80 mm dia.

Providing and fixing resilient rubber neoprene lined single arch vibration eliminators with unit control suitable for raw water upto 450C temperature working pressure 25 kg and test pressure 37.5 kg/cm2. - 100 mm dia

Providing and fixing resilient rubber neoprene lined single arch vibration eliminators with unit control suitable for raw water upto 450C temperature working pressure 25 kg and test pressure 37.5 kg/cm2. - 150 mm dia

Providing and fixing heavy duty PVC insulated, PVC armoured conductor cables 1100 V grade including necessary support clamps and connection lugs complete in all respects. Power cable 3.5 core 150 sq mm aluminium conductor armoured cable

Providing and fixing heavy duty PVC insulated, PVC armoured conductor cables 1100 V grade including necessary support clamps and connection lugs complete in all respects. Power cable 3 core 16 sq mm aluminium conductor armoured cable.

Providing and fixing heavy duty PVC insulated, PVC armoured conductor cables 1100 V grade including necessary support clamps and connection lugs complete in all respects. Control cable copper 2 core 1.5 sq.mm

Supply, Installation, Testing & Commissioning of double flanged vertical air vessel fabricated shell from 10 mm thick & dished ends 12 mm thick M.S.plate, suitable for working pressure of 18 kg/cm2 and test pressure of 27 kg/cm2, 450 mm dia and 2.00 m high for fire pumps complete with four nos dual setting pressure switches to operate jockey and main pumps at drop of pressure as given in the specifications.

Providing & fixing 150 mm diameter MS Class ‘C’ for diesel engine exhaust pipe (including all fittings, clamps, steel support) of suitable dia for the diesel engine. The pipe shall be provided insulation with fibre glass wool and wraped with 24g. aluminium sheet complete with all respect.

Providing and fixing 25 mm dia inspecting & testing assembly with built in bye pass arrangement and connection to drain line. (Giocomini)

INTERNAL ELECTRICAL Wiring for light/ fan/ call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 2 mm thick 20mm dia rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including ceiling rose etc. complete Short point up to 3.00 metre. Length.

Wiring for light/ fan/ call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 2 mm thick 20mm dia rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including ceiling rose etc. complete Medium point up to 6.00 metre. Length.

Wiring for light/ fan/ call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 2 mm thick 20mm dia rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including ceiling rose etc. complete Long point up to 10.00 metre. Length.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 10 sq. mm. + earth continuity with 1x 6 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 16 sq. mm. + earth continuity with 1x 10 sq. mm. cable in 32 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including earth continuity in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system . With 3 x 2.5 sq. mm. + earth continuity with 2x1.5 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including earth continuity in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system . With 3 x 4 sq. mm. + earth continuity with 2x 2.5 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including earth continuity in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system . With 3 x 6 sq. mm. + earth continuity with2x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including earth continuity in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system . With 3 x 10 sq. mm. + earth continuity with2x 6 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including earth continuity in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system . With 3 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in 32 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 4x 6 sq. mm. + earth continuity with 2x4 sq. mm. cable in 32 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 4 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Supplying with fitting and fixing of 120 watt electronic modular STEP speed control 2 - module type MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. 120 watt electronic modular step speed control 2 - module type

Supplying with fitting fixing of 6 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Supplying with fitting fixing of 6 amp one way modular clip in bell push with LED, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying including installation of socket outlet 6 Amps 3 pin universal combine shuttered complete , MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Supplying including installation of socket outlet 16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying including installation of socket outlet 6/10/13 Amps INTERNATIONAL SOCKET , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying including installation of socket outlet 10 Amps 3 pin combine shuttered complete , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting fixing of 16 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting fixing of 6/10 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting fixing of 16 amp one way modular clip in switch with LED, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting fixing of 6/10 amp one way modular clip in switch with LED , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting fixing of 6/10 amp two way modular clip in switch , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting fixing of blank plate single in modular switch system , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. 1-2 module type Metal

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. 3 module type Metal

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. 4 module type Metal

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. 6 module type Metal

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. 8 module type Metal

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. 9 module type Metal

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. 12 module type Metal

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. 18 module type Metal

Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 1 module

Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 2 module

Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 3 module

Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 4 module

Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 6 module

Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 8 module

Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 9 module

Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 12 module

Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 18 module

Supplying fitting and fixing industrial Plug & Socket in surface mounting SPN sheet steel powder painted MCB DB incorporated with MCB DIN rail, neutral link Earth bar of the following rating of DP MCB complete with making necessary connection etc. as specified and directed by the Deptt. 20A Capacity. (ABB, Schneider MG, legrand, Hager make)

Supplying fitting and fixing industrial Plug & Socket in surface mounting TPN sheet steel powder painted MCB DB incorporated with MCB DIN rail, neutral link Earth bar of the following rating of 4P MCB complete with making necessary connection etc. as specified and directed by the Deptt. ABB, Schneider MG, legrand, Hager make) 20 A Capacity.

Supplying fitting and fixing industrial Plug & Socket in surface mounting TPN sheet steel powder painted MCB DB incorporated with MCB DIN rail, neutral link Earth bar of the following rating of 4P MCB complete with making necessary connection etc. as specified and directed by the Deptt. ABB, Schneider MG, legrand, Hager make) 30/32A Capacity.

TELEPHONE /TV/DATA/ CCTV Supplying including fitting and fixing of TV SOCKET, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

TELEPHONE /TV/DATA/ CCTV Supplying with fitting and fixing of RJ-11 Telephone jack , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

TELEPHONE /TV/DATA/ CCTV Supplying with fitting and fixing of CAT 6 RJ-45 Computer jack in one module , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

TELEPHONE /TV/DATA/ CCTV Supply and fixing 19 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:

TELEPHONE /TV/DATA/ CCTV Supply and fixing 25 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:

TELEPHONE /TV/DATA/ CCTV Supply and fixing 32 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:

Wiring for Co - axial Jelly Flooded (Unarmoured) (FINOLEX /RR KABEL /NICCO / ANCHOR make) cable in existing surface conduit wiring system including connection etc as required. Co - axial Jelly Flooded (Unarmoured) RG 6 (Copper)

Supply, installation testing and commissioning of following LAN networks equipments. Solid Copper Cable Cat 6, 4 pair, UTP - 305m SCHNEIDER/LEGRAND or equivalent make as approved by the Deptt..

Supply and laying of following size armoured telephone cable laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 20 pair

Supply and laying of following size armoured telephone cable laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 50 pair

Supplying ,installation, testing & commissioning of 2 pair Unarmoured Telephone Cable through existing conduit in surface/ recess system.

Supplying ,installation, testing & commissioning of 5 pair Unarmoured Telephone Cable through existing conduit in surface/ recess system.

Supplying ,installation, testing & commissioning of 20 pair Unarmoured Telephone Cable through existing conduit in surface/ recess system.

Supplying ,installation, testing & commissioning of Distribution Box 20 pairs with Krones ( SIEMENS or equivalent as approved by the Deptt.)

Supplying ,installation, testing & commissioning of Distribution Box 50 pairs with Krones ( SIEMENS or equivalent as approved by the Deptt.)

DISTRIBUTION BOARS Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make, Richa, Bentec, Adhunic, V-Guard make 8 way SPN double door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make, Richa, Bentec, Adhunic, V-Guard make 12 way SPN double door

Supplying with fitting and fixing 7segment sheet steel, phosphatised, powder painted surface mounting double door TPN DB (IP 42) incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. common for MCB/Isolator etc. with phase segregation and separation between incoming and outgoing, making necessary connection as approved, specified and directed by the deptt. 4way double door

Supplying with fitting and fixing 7segment sheet steel, phosphatised, powder painted surface mounting double door TPN DB (IP 42) incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. common for MCB/Isolator etc. with phase segregation and separation between incoming and outgoing, making necessary connection as approved, specified and directed by the deptt. 6way double door

Supplying with fitting and fixing 7segment sheet steel, phosphatised, powder painted surface mounting double door TPN DB (IP 42) incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. common for MCB/Isolator etc. with phase segregation and separation between incoming and outgoing, making necessary connection as approved, specified and directed by the deptt. 8way double door

Supplying with fitting and fixing 7segment sheet steel, phosphatised, powder painted surface mounting double door TPN DB (IP 42) incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. common for MCB/Isolator etc. with phase segregation and separation between incoming and outgoing, making necessary connection as approved, specified and directed by the deptt. 12way double door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof IP-43 double door surface mounting vertical Per Phase Isolation (PP DB incorporated with bas-bar 125A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. Richa, Bentec, Adhunic, V-Guard make) 8 way TPN (8+6+24) double door

Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series (Schneider MG, legrand, Hager make) 6 to 32A

Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (Schneider MG, legrand, Hager make) 6 to 32A

Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 3. D Series (ABB, Schneider MG, legrand, Hager make) 6 to 32A

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. (ABB, Schneider MG, legrand, Hager make) B Series 6 to 32A

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. (ABB, Schneider MG, legrand, Hager make) B Series 40A

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. (Schneider MG, legrand, Hager make) B Series 6 to 32

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. (Schneider MG, legrand, Hager make) B Series 40A

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. (Schneider MG, legrand, Hager make) B Series 63A

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. (Schneider MG, legrand, Hager make) C Series 6 to 32

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. (Schneider MG, legrand, Hager make) C Series 40A

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. (Schneider MG, legrand, Hager make) C Series 100A

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. (Schneider MG, legrand, Hager make) C Series 125A

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. (ABB, Schneider MG, legrand, Hager make) 3. D Series 6 to 32

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. (ABB, Schneider MG, legrand, Hager make) 3. D Series 40A

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. (ABB, Schneider MG, legrand, Hager make) 3. D Series 63A

RCCB Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. (ABB, Schneider MG, legrand, Hager make) 30mA sensitivity DP RCCB 25A

RCCB Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.(ABB, Schneider MG, legrand, Hager make) 30mA sensitivity DP RCCB 40A

RCCB Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.(ABB, Schneider MG, legrand, Hager make) 30mA sensitivity DP RCCB 63A

RCCB Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.(ABB, Schneider MG, legrand, Hager make) 100/300mA sensitivity DP RCCB (ABB, Schneider MG, legrand, Hager make) 25A

RCCB Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.(ABB, Schneider MG, legrand, Hager make) 100/300mA sensitivity DP RCCB (ABB, Schneider MG, legrand, Hager make) 40A

RCCB Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.(ABB, Schneider MG, legrand, Hager make) 100/300mA sensitivity DP RCCB (ABB, Schneider MG, legrand, Hager make) 63A

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz 4P RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 100/300mA sensitivity 4P RCCB (ABB, Schneider MG, legrand, Hager make) 25A

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz 4P RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 100/300mA sensitivity 4P RCCB (ABB, Schneider MG, legrand, Hager make) 40A

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz 4P RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 100/300mA sensitivity 4P RCCB (ABB, Schneider MG, legrand, Hager make) 63A

Supplying and fixing 18 S.W.G sheet steel metal boxes of the following sizes in surface/ recessed Wiring system with suitable size of 3 mm thickness phenolic laminated sheet cover on the front face of the boxes including painting etc. as required and specified by the department. 100 x 100 x 60 mm deep(Nominal size )

Supplying and fixing 18 S.W.G sheet steel metal boxes of the following sizes in surface/ recessed Wiring system with suitable size of 3 mm thickness phenolic laminated sheet cover on the front face of the boxes including painting etc. as required and specified by the department. 100 x 150 x 60 mm deep (Nominal size )

Supplying and fixing 18 S.W.G sheet steel metal boxes of the following sizes in surface/ recessed Wiring system with suitable size of 3 mm thickness phenolic laminated sheet cover on the front face of the boxes including painting etc. as required and specified by the department. 100 x 175 x 60 mmdeep (Nominal size )

Supplying and fixing 18 S.W.G sheet steel metal boxes of the following sizes in surface/ recessed Wiring system with suitable size of 3 mm thickness phenolic laminated sheet cover on the front face of the boxes including painting etc. as required and specified by the department. 200 x 150 x 60 mm deep (Nominal size )

Supplying and fixing 18 S.W.G sheet steel metal boxes of the following sizes in surface/ recessed Wiring system with suitable size of 3 mm thickness phenolic laminated sheet cover on the front face of the boxes including painting etc. as required and specified by the department. 200 x 200 x 60 mm deep (Nominal size )

Supplying and fixing 18 S.W.G sheet steel metal boxes of the following sizes in surface/ recessed Wiring system with suitable size of 3 mm thickness phenolic laminated sheet cover on the front face of the boxes including painting etc. as required and specified by the department. 200 x 250 x 60 mm deep (Nominal size )

Supplying and fixing 18 S.W.G sheet steel metal boxes of the following sizes in surface/ recessed Wiring system with suitable size of 3 mm thickness phenolic laminated sheet cover on the front face of the boxes including painting etc. as required and specified by the department. 200 x 300 x 60 mm deep (Nominal size )

Supplying and fixing 18 S.W.G sheet steel metal boxes of the following sizes in surface/ recessed Wiring system with suitable size of 3 mm thickness phenolic laminated sheet cover on the front face of the boxes including painting etc. as required and specified by the department. 250 x 300 x 60 mm deep (Nominal size )

Supplying and fixing 18 S.W.G sheet steel metal boxes of the following sizes in surface/ recessed Wiring system with suitable size of 3 mm thickness phenolic laminated sheet cover on the front face of the boxes including painting etc. as required and specified by the department. 250 x 350 x 60 mm deep (Nominal size )

Supplying and fixing 18 S.W.G sheet steel metal boxes of the following sizes in surface/ recessed Wiring system with suitable size of 3 mm thickness phenolic laminated sheet cover on the front face of the boxes including painting etc. as required and specified by the department. 200 x 350 x 60 mm deep (Nominal size )

INTALLATION OF FITTINGS/FANS Installation, testing and commissioning of pre-cabled fluorescent fitting of all types, complete with all accessories and tubes etc. directly on ceiling/wall including connection as approved by the Deptt.)with 1.5 sq mm PVC insulated copper cables as required.

INTALLATION OF FITTINGS/FANS Installation, testing and commissioning of pre-cabled fluorescent of all types, complete with all accessories and tubes etc. including supplying ball and socket arrangement, suspension down rod of 19 mm dia H.G. conduit up to 30 cm length including painting and connection as approved by the Deptt.)with 1.5 sq. mm copper cables as required.

INTALLATION OF FITTINGS/FANS Installation, testing and commissioning of ceiling fan including the regulator /down rod of standard size (Up to 300 mm ) length including connection as approved by the Deptt.)as required.

INTALLATION OF FITTINGS/FANS Numbering of ceiling fans/exhaust fans as required

INTALLATION OF FITTINGS/FANS Installation of Exhaust fan up to 450 mm sweep in the existing opening including making the hole to suit the size of the above fan, making good the damages, testing, commissioning etc. as required complete

INTALLATION OF FITTINGS/FANS Installation of Exhaust fan up to 510 mm sweep in the existing opening including making the hole to suit the size of the above fan, making good the damages, testing, commissioning etc. as required complete

INTALLATION OF FITTINGS/FANS Extra for fixing the Louvers/Shutters complete with frame for exhaust fans of all sizes

EARTHING Supply, installation & testing of G.I. Plate earth station with 600 mmx600 mmx6 mm heavy duty G.I. earth plate with necessary 40 mm dia. G.I. watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm hinged cover C.I. cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

EARTHING Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx3 mm copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

EARTHING Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx6 mm heavy duty copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Extra for using salt (5 K and Charcoal (96 K in G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt .

Supplying & laying of 8 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying & laying of 8 SWG Copper. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying & laying of following size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt. 25 X 3MM

Supplying & laying of following size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt. 25 X 3MM

Supplying & laying of following size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Advanced Lightning protection Supply, installation & commissioning of Advanced Lightning protection system by using High pulse Voltage ESE Lightning conductor with Optimized Pulse Rod (ABB or equivalent make) as specified and directed by the deptt (as per NFC 17 - 102 STANDARD & IEC Std 60 - 111989)

Advanced Lightning protection Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Advanced Lightning protection Supply, fitting & fixing 20 mmx3 mm Copper strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of Brass Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deptt.)with earth electrode copper strips and Lightning Arrestor etc. as specified and directed by the deptt.

Lightning protection Supply, fitting & fixing of Lighting Finial Arrestor made of 25 mm dia 300 mm long solid Copper tube having 85 mm dia. single prong at top and 3 mm thick base plate at bottom complete with fitting & fixing with Brass nuts & bolts on roof, RCC slab, top of column etc. as specified and directed by the deptt.

Supply, fitting & fixing 20 mmx5 mm G.I. strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of G.I. Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deptt.)with earth electrode G.I. strips and Lightning Arrestor etc. as specified and directed by the deptt.

Supply, installation & testing of G.I. Plate earth station with 600 mmx600 mmx6 mm heavy duty G.I. earth plate with necessary 40 mm dia. G.I. watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm hinged cover C.I. cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

CABLES & CABLE TRAY Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured/Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . Core - 4 A2XWY A2XFY 10 Sq.mm four core armoured cable

CABLES & CABLE TRAY Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured/Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . Core - 4 A2XWY A2XFY 16 Sq.mm four core armoured cable

CABLES & CABLE TRAY Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured/Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . Core - 4 A2XWY A2XFY 25 Sq.mm four core armoured cable

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 3 & 1/2 Core A2XFY 300.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 3 & 1/2 Core A2XFY 400.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 3 & 1/2 Core A2XFY 185.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 3 & 1/2 Core A2XFY 240.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 3 & 1/2 Core A2XFY 25.00 Sq. mm.4 Core armoured U.G. cable

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) SINGLE compression BRASS GLAND HEAVY DUTY SINGLE compression BRASS GLAND HEAVY DUTY Size: 1"

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) SINGLE compression BRASS GLAND HEAVY DUTY SINGLE compression BRASS GLAND HEAVY DUTY Size: 1 - 1/8"

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) SINGLE compression BRASS GLAND HEAVY DUTY SINGLE compression BRASS GLAND HEAVY DUTY 1-1/4"

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) SINGLE compression BRASS GLAND HEAVY DUTY SINGLE compression BRASS GLAND HEAVY DUTY Size: 1 -3/8"

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) SINGLE compression BRASS GLAND HEAVY DUTY SINGLE compression BRASS GLAND HEAVY DUTY Size: 1 -1/2"

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) SINGLE compression BRASS GLAND HEAVY DUTY SINGLE compression BRASS GLAND HEAVY DUTY Size: 1 - 3/4"

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) SINGLE compression BRASS GLAND HEAVY DUTY SINGLE compression BRASS GLAND HEAVY DUTY Size: 2"

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) SINGLE compression BRASS GLAND HEAVY DUTY SINGLE compression BRASS GLAND HEAVY DUTY Size: 2 - 1/4"

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) SINGLE compression BRASS GLAND HEAVY DUTY SINGLE compression BRASS GLAND HEAVY DUTY Size: 2 - 1/2"

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) SINGLE compression BRASS GLAND HEAVY DUTY SINGLE compression BRASS GLAND HEAVY DUTY Size: 2 - 3/4"

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) SINGLE compression BRASS GLAND HEAVY DUTY SINGLE compression BRASS GLAND HEAVY DUTY Size: 3"

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) SINGLE compression BRASS GLAND HEAVY DUTY SINGLE compression BRASS GLAND HEAVY DUTY Size: 3 - 1/4"

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) SINGLE compression BRASS GLAND HEAVY DUTY SINGLE compression BRASS GLAND HEAVY DUTY Size: 3 - 1/2"

Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make). Size of Tray 101

Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make). Size of Tray 203

Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make). Size of Tray 228

Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make). Size of Tray 304

Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make). Size of Tray Bend 101

Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make). Size of Tray Bend 203

Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make). Size of Tray Bend 228

Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make). Size of Tray Bend 304

Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make). Size of Tray Inter/Exter Bend 228

Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make). Size of Tray Inter/Exter Bend 304

Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make). Size of Tray Tee 228

Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make). Size of Tray Tee 304

LIGHT FITTING & FANS Supplying and fitting fixing of Electric storage water heater [Geyser] of Bajaj/Crompton/Racold/V. Guard or equivalent make including necessary connection cable, as approved by the Deptt.)etc. as required complete and as directed by the Department. Vertical type : 10.00 litres. Capacity (5 Star Model) (Bajaj/Crompton/Racold /V. Guard or equivalent make

LIGHT FITTING & FANS Supplying, installation, testing and Commission of the following indoor CFL/Fluorescent luminaries complete with all accessories such as ballast, starter etc. directly on wall / ceiling including connection cable, as approved by the Deptt.)with 1.5 sq mm P.V.C. insulated S.C.copper conductor as required and as directed by the department. BATTEN LIGHT, MIROLTA SLIM T 5 TMS 540 with 1x28 W T-5 Fluorescent tube. (Philips make or equivalent)

LIGHT FITTING & FANS Supplying, installation, testing and Commission of the following indoor CFL/Fluorescent luminaries complete with all accessories such as ballast, starter etc. directly on wall / ceiling including connection cable, as approved by the Deptt.)with 1.5 sq mm P.V.C. insulated S.C.copper conductor as required and as directed by the department. BATTEN LIGHT, ADRENO V 28 W TWG 207 with 1x28 W T-5 Fluorescent tube. (Philips make or equivalent)

Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator]. Premium model 1200 mm Sweep CROMPTON make),

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. Trans Air 300 mm sweep (Crompton make)

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 400A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 160A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 630A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 250A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 125A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 160 A MCCB

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 100A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 40A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 250A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 63A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 250A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 125A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 63A

Supplying with fitting and fixing panel mounting open execution 50 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved by the Deptt.),as specified and directed by the deptt. 50 KA 415V 50 Hz 3P MCCB (ABB(S6) , Schneider, legrand, Siemens, Indo Asian make) 800A

Supplying with fitting and fixing panel mounting open execution 50 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved by the Deptt.),as specified and directed by the deptt. 50 KA 415V 50 Hz 3P MCCB (ABB(S6) , Schneider, legrand, Siemens, Indo Asian make) 125A

Supplying with fitting and fixing panel mounting open execution 50 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved by the Deptt.),as specified and directed by the deptt. 50 KA 415V 50 Hz 3P MCCB (ABB(S6) , Schneider, legrand, Siemens, Indo Asian make) 160A

Supplying with fitting and fixing panel mounting open execution 50 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved by the Deptt.),as specified and directed by the deptt. 50 KA 415V 50 Hz 3P MCCB (ABB(S6) , Schneider, legrand, Siemens, Indo Asian make) 250A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 400A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 160A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 630A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 250A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 100A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 63A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 160 A MCCB

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 40A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 250A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 63A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 630A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 250A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 160A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 100A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 63A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 630A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 250A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 160A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 100A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 63A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. "25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make)" 160 A MCCB

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. "25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make)" 40A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 400A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 250A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 160A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 125A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 100A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 63A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 160 A MCCB

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 125A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 40A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 250A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 125A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 63A

Supplying with fitting and fixing TP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the C Series (Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.) deptt. 63A

Three phase energy meter with suitable CT's

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.) 6 to 32A

Single phase energy meter with suitable CT's

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 100A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 40A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 250A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 63A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 40A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 100A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 160 A MCCB

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 125A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 40A

Supplying with fitting and fixing panel mounting open execution 35/36KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 35/36 KA 415V 50 Hz 3P MCCB (C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.) 400A

Supplying with fitting and fixing panel mounting open execution 35/36KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 35/36 KA 415V 50 Hz 3P MCCB (C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.) 160A

Supplying with fitting and fixing panel mounting open execution 35/36KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 35/36 KA 415V 50 Hz 3P MCCB (C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.) 63A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 250A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 160A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 63A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 160A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 63A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 250A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 125A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 63A

Supply & Fixing 2 Core 1.5 sq. mm. 500V Mineral Insulated Copper Cable with Welded outer copper sheath Fire Survival type, which can withstand 950 Deg C for three hours as per BS 6387 and shall also withstand CWZ test on one single Cable as per BS 8434-2. The cable shall be approved by LPCB, and the performance requirement should as per IEC 60331, BS 5839-1, BS 6387, and BS 8434 standards,The cable should be supplied and installed with all accessories as per BS EN 60702 part 2 and also Cost of Glands & Seals for this cable including. Make: TYCO / PYROTENAX / PRYSMIAN/ CAVICEL.

FIRE ALARM ADDRESSABLE SYSTEM & PA SYSTEM Supply, Installation, Testing, Commission of Panel, Maximum 10 Loops Dual Processor, 8 loops with Networkable, No Loops Fitted, Requires loop card and network card additionally for networking , Zone Indication, Colour graphical LCD display, Integrated PSU with Battery Charger.

Supply, Installation, Testing, Commission of Network Card / RS 232 Communication Board

Supply, Installation, Testing, Commission of Addressable Wall Mounting Sounder / Hooter Cum Strobe

Supply, Installation, Testing, Commission of Addressable Semi Flush Mounting Resettable (NonBreaking Glass) MCP, Supplied with Special Reset Tool

Supply, installation, testing & commissioning of intelligent plug in photo electric Smoke Detectors having features like integral communication, dual LED for 360° viewing angle, walk test with address display etc. UL / LPCB approved, (Below False Ceiling)

Supply, installation, testing & commissioning of intelligent plug in photo electric Smoke Detectors having features like integral communication, dual LED for 360° viewing angle, walk test with address display etc. UL / LPCB approved, (Above False Ceiling)

Supply, installation, testing & commissioning of intelligent plug in Thermal Detectors having features like integral communication, dual LED for 360° viewing angle, walk test with address display etc. UL / LPCB approved,

Supply, Installation, Testing and Commissioning of Response Indicator

Supply, Installation, Testing, Commission of Addressable Input / Ouput Module

Supply, Installation, Testing & Commissioning of Microprocessor based fire Alarm control panel suitable for wall mounted type with audio visual indication zone i.e. rectifier and charger circuit and maintenance free battery of 2X12 volt with suitable Ampere hour capacity complete ( 08 Zone panel)

Supply, Installation, Testing & Commissioning of Fire Alarm hooter with audible range of 25 metre 80 bb output complete.

Supply, Installation, Testing & Commissioning of Manual Call box made of M/s. Aluminium dia cast with epoxy coated paint with hammer & chain.

Supply, Installation, Testing, Commission of Fire Alarm Control Panel, 2 loop card inbuild,198 Addressable points per loop,total addressable devices 396,Integrated PSU with battery Charger,Requires network card additionally for networking.

FIRE ALARM ADDRESSABLE SYSTEM & PA SYSTEM Supply,Installation,Testing and Commissioning of short circuit isolator.

Supply, Erection, Testing and Commissioning of of solid state Amplifier of 480 W RMS out put in rack, including necessory control wires, jacks etc. complete.

Supply, Erection, Testing and Commissioning of of solid state Amplifier of 120 W RMS out put in rack, including necessory control wires, jacks etc. complete.

Supply, Erection, Testing and Commissioning of of solid state Amplifier of 180 W RMS out put in rack, including necessory control wires, jacks etc. complete.

Supply, Erection, Testing and Commissioning of 6W wall mounted type speakers with mounting fixtures

Supply, Erection, Testing and Commissioning of Gooseneck Microphone with Features : Dynamic Directivity: Cardioid Frequency response : 100Hz÷12 kHz Sensitivity: (OdB-1V/micro bar,1000 Hz) -75dB±3dB Output impedance :500ohm

Supply and fixing 32 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:

Supply and fixing 38 mmdia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:

NETWORKING (Data, LAN & PA system) CCTV Supplying installation testing of Wall Mount, Applicable Model : SCP3430H, SCP2430H, SCP3370TH, SCP3370H, SCP2370TH, SCP2370H, SCP3250H, SCP2250H, SCP3120VH, SNP5200H, SNP3120VH, SBP37 (SAMSUNG or equivalent HONEYWELL/PANASONIC make)

Supplying installation testing and commissioning of - Vandal Resistant IR Dome Camera, 1/3" Super HAD CCD, 600 TVL (Colour) / 700 TVL (B/W), Min Illumination 0 Lux (IR Led on), IR Distance 30 M, 3.6x Varifocal lens 2.8 ~ 10 mm, True Day & Night, IP 66 (SAMSUNG or equivalent HONEYWELL/PANASONIC make)

APW Flexi box Wall mount Rack 12U 19"X 500mmD Networking Wall mount Rack with Front Tinted Glass Door with Lock "PDU 6*5A - 01 Nos. Fan 90 cfm 230V - 01 Nos. Mounting Hardware (Set of 10) - 1 Set 19"" 1U Cable Manager - 1 Nos."

Supply, installation testing and commissioning of following LAN networks equipments. Solid Copper Cable Cat 6, 4 pair, UTP - 305m SCHNEIDER/LEGRAND or equivalent make as approved by the Deptt..

Supplying with fitting and fixing of CAT 6 RJ-45 Computer jack in one module MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Patch Cord Cat 6 UTP Gray 1m - Moulded SCHNEIDER/ LEGRAND or equivalent

Supply and fixing 25 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:

DATA Supply, installation testing and commissioning of following LAN networks equipments. Solid Copper Cable Cat 6, 4 pair, UTP - 305m SCHNEIDER/LEGRAND or equivalent make as approved by the Deptt..

Supplying with fitting and fixing of CAT 6 RJ-45 Computer jack in one module MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Supply and fixing 25 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:

Patch Cord Cat 6 UTP Gray 2m - Moulded SCHNEIDER/LEGRAND or equivalent make as approved by the Deptt..

Patch Panel Cat 6 UTP Keystone -24 Port- Loaded SCHNEIDER/LEGRAND or equivalent make as approved by the Deptt..

APW Cyber Rack Server Rack 24U APW President Enclosure, 600mmW CYBERACK 24U / 1000mmD (CRCA Steel Frame with Aluminium Profiles & 2 Nos. of Removable Side Panels with following items: - Top cover with cable entry -1no. - Bottom cover with cable entry -1no. - 19” Mounting Angles – 2 pairs. ,Finish : Powder coated to 80 microns; Matt finish. colour : BLACK with , Load rating capacity -- 500 kgs., Front side vented glass door and rear full perforated steel door with locks. "PDU 6*5/15A - 01 Nos. Fan 90 cfm 230V - 02 Nos. Mounting Hardware (Set of 20) - 1 Set 19"" 1U Cable Manager - 1 Nos. Castor with Brake - 2 Nos Castor without Brake - 2 Nos."

APW Flexi box Wall mount Rack 12U 19"X 500mmD Networking Wall mount Rack with Front Tinted Glass Door with Lock "PDU 6*5A - 01 Nos. Fan 90 cfm 230V - 01 Nos. Mounting Hardware (Set of 10) - 1 Set 19"" 1U Cable Manager - 1 Nos."

APW Flexi box Wall mount Rack 15U 19"X 500mmD Networking Wall mount Rack with Front Tinted Glass Door with Lock "PDU 6*5A - 01 Nos. Fan 90 cfm 230V - 01 Nos. Mounting Hardware (Set of 10) - 1 Set 19"" 1U Cable Manager - 1 Nos."

Supplying with fitting and fixing of RJ-11 Telephone jack MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Patch Cord Cat 6 UTP Gray 1m - Moulded SCHNEIDER/ LEGRAND or equivalent

LED LIGHT FITTING (NON SOR ITEMS ) Supply, installing, testing and commissioning of 4 FT LENGTH 20 W Light Fixture BATTEN LED , (Philips BN021C LED20S or Equivalent) ( SURFACE MOUNTED ) including with mounting clamp

Supply, installing, testing and commissioning of 15 W LED DOWN Light Fixture , (Surface Mounted) Philips - SM200C LED15S 4000 PSU OD WH or Equivalent 15W LED WHITE ( ForHospital Corridor )

Supply, installing, testing and commissioning of 10 W LED DOWN Light Fixture , Philips - DN170C LED10S-6500 PSU WH or Equivalent 15W LED WHITE ( ForHospital Toilet )

Supplying, fixing testing and commissioning of 15 W LED recessed down lighter complete with all accesories in the false ceiling including giving connections complete as requried. Rate should include for all necessary supports for mounitng the light fittings - similar to (PHILIPS Green LED DN 194 LED15S-6500 PSU WH S1 or Equivalent)

Supplying, fixing testing and commissioning of 9 W LED recessed down lighter complete with all accesories in the false ceiling including giving connections complete as requried. Rate should include for all necessary supports for mounitng the light fittings - similar to (PHILIPS Green LED DN 194 LED9S-6500 PSU WH S1 or Equivalent)

Supply, installing, testing and commissioning of Skirting Light with white LED-3 Module fitting Including 3M Box. 6730 36 of Legrand Make or Equivalent ( ForNight Lamp ) For QTRS.

Supply, installing, testing and commissioning of BULK HEAD Light Fixture WT202W LED6S NW PSU S2 PC of Philips Make or Equivalent - 10 W WHITE ( For Terrace Floor & Lift Shaft )

Supply of recess mounting LED luminare with 36W square (2' X 2') type along with providing and fixing. (Bajaj SKYLIGHT-2'X2'-112070 or Equivalent)

Supply of Surface mounting LED luminare with 36W square (2' X 2') type along with providing and fixing. (Bajaj SKYLIGHT-2'X2'-111652 or Equivalent)

NETWORKING (Data, LAN & PA system) EPABX Supply, installation, testing and commissioning of following Matrix system or Siemens system or Equivalent ETERNITY LENX27SDC or equivalent

ETERNITY ME Card DKP16 or equivalent

ETERNITY ME Card T1E1PRI SINGLE or equivalent

ETERNITY LE Card SLT48 or equivalent

ETERNITY ME Card CO8+SLT24 or equivalent

ETERNITY ME Card GSM8 or equivalent

SARVAM UCS ENT or equivalent

SARVAM EXP4 ENT or equivalent

NX DBM VOCODER64 or equivalent

SARVAM VOCODER CHNL16 or equivalent

NX DBM VMS64 or equivalent

SARVAM VMS CHNL16 or equivalent

SARVAM IPSUB100 or equivalent

SARVAM VARTA USER100E ( 100 User) or equivalent

SARVAM VARTA USER5C ( 5 User) or equivalent

EON 510 or equivalent

DSS532 or equivalent

ETERNITY MENX-LENX Card CPU or equivalent

ETERNITY LE Card PS48VDC or equivalent

Emerson Convertor AC to DC or equivalent

Entry Level IP phone with POE Model : SPARSH VP110 or equivalent

Video Phone With POE Mdoel : SPARSH VP710 or equivalent

PA - Systems Coupler or equivalent

1 Port Voice Logger - Extend or equivalent

Call Billing Software

Installation & Commissioning Charges

Fiber box

GI pole for outdoor Camera

24 Port Patch Panel - Unloaded

128 channel NVR (Network Video Recorder) Model : DS-96128NI-I16

6TB Seagate Hard disk for recording

6U Outdoor IP66 Rack with PDU - 1 no, Cable manager - 1, Fan Module - 1set and Hardware set

1" HDPE Pipe

6 Core Optical Fibre Cable OM3-Outdoor MM

24 Port LIU Rack Mount- Loaded(Server room side)

12 Port LIU Rack Mount- Loaded(Shaft side)

SC to LC Fibre Patch Chord 3 mtr OM3

HP 24G-SFP Switch, 16 SFP ports, 8 dual 10/100/1000 ports, 2 slots, 2 power supply slots (1 power supply included) L3 Managed Switch

HP 2530-24G-PoE+ Switch, 24 10/100/1000 PoE+ ports, 4 SFP ports (195W PoE+)

Multi Mode SFP Module 10/100/1000

Face Plate - Dual

Face Plate - Single

6 Core Optical Fibre Cable OM3-Outdoor MM

SC to LC Fibre Patch Chord 3 mtr OM3

VOICE Supply, installation testing and commissioning of following LAN networks equipments. Solid Copper Cable Cat 6, 4 pair, UTP - 305m SCHNEIDER/LEGRAND or equivalent make as approved by the Deptt..

24 Port Patch Panel for Voice - Unloaded - Outgoing (Shaft side)

50pair jelly filled armored cable

20pair jelly filled armored cable

Face Plate - Single

1U cable manager - Shaft side

1U cable manager - Server room rack

OPEN RACK/Aluminium-M6 Tapped/2Post/45U/Powder Coated/19"DIN - 4 nos, High Density Vertical Cable Organiser/8inch/Front &Back/45U - 2 nos, High Density Vertical Cable Organiser/12inch/Front &Back/45U - 3 nos, Run-Way Kit-20Inch - 4 nos, Mounting Hardware/OR/Pk-20 - 1 no

24 Port Patch Panel for Voice - loaded - Incoming

SERVER Server : ThinkSystem SR630 Equivqlent Hp / Cisco /- 3yr Warranty

2.5" Chassis with 8 Bays, Intel Xeon Silver 4116 12C 85W 2.1GHz Processor, 4 nos. - 16GB TruDDR4 2666 MHz (2Rx8 1.2V) RDIMM, SR530/SR630/SR570 2.5" SATA/SAS 8-Bay Backplane, RAID 730-8i 1GB Cache PCIe 12Gb Adapter, 2 nos. - 2.5" 300GB 10K SAS 12Gb Hot Swap 512n HDD, SR530/SR570/SR630 x8/x16 PCIe LP+LP Riser 1 Kit, 1U LP+FH BF Riser Bracket, 1Gb 4-port RJ45 LOM, I350-T4 PCIe 1Gb 4-Port RJ45 Ethernet Adapter, External USB DVD-RW Optical Disk Drive, 2nos. - 550W (230V/115V) Platinum Hot-Swap Power Supply, 2 nos- 2.8m, 13A/100-250V, C13 to C14 Jumper Cord, XClarity Controller Standard to Enterprise UpgradeStorage : DS2200 SFF Chassis, 2 nos- DS2200 FC/iSCSI Controller Module, 4 nos - 1G RJ45 iSCSI SFP+ Module 1 pack, 12Gb SAN Rack Mount Kit-Rails 25"-36", 7 nos - Storage 2TB 7.2K 2.5" NL-SAS HDD, USB A Male-to-Mini-B 1.5m cable, 2 nos - 1.2m, 10A/100-250V, 2 Short C13s to Short C14 Rack Power Cable

DATA CENTER Automatic Regulatory Apparatus for IT Systems, SR320RC or equivalent CRV Containment kit - 2nos., Rack, Containment kit with 800 w x 1000 d x 42U (1) , 600w x 1000 d x 42 U (2) - 3 nos., Utility Cabinet kit, 2 nos - CRV 20 KW with 1 set RDU with Sensors with notification system, 1 set - DB Panel for SR 220, with Dual Source Input, Kit Fire Fighting System, for SR 320 RC –Novec 1230 or equivalent, Kit, Power Cable, for Smart Row SR 320RC or equivalent, Biometric / Card Reader based Access Control System, UPS with 20 KVA x 2 sets with 30 min backup, 8 Port IP KVM with Accessories / set, 6 nos - Intelligent PDU / unit

Lifting, shifting and Positioning of units, Assembling all smart solution components, I&C of components including supply of low side items like copper piping, Refrigerant gas, CPVC/UPVC pipes, Copper cables, frames, etc, installation and comissioning complete

SWITCHES HPE 5510 24G SFP 4SFP+ HI Switch or equivalent

HPE X361 150W AC Power Supply or equivalent

HPE X120 1G SFP LC SX Transceiver or equivalent

HPE X130 10G SFP+ LC SR Transceiver or equivalent

HPE X240 10G SFP+ SFP+ 1.2m DAC C-Cable or equivalent

Aruba 2530 24G Switch or equivalent

Aruba 2530 48G Switch or equivalent

Aruba 1G SFP LC SX 500m MMF Transceiver or equivalent

LIFT Design, manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. LIFTS (With Machine Room) Design,manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. Elevator in Shaft of dimensions 2400 mm x 3000 mm (W x D) for minimum payload carrying capacity of 26 passenger/ 1768 kg (Simplex Control) having a travel speed of 0.75 metre/ sec and travel height of 8.0 Mtrs. (approx.) with 3 Stops and Microprocessor based control suitable for operation on 415 V, 50 Hz, 3 phase A.C. electric supply complete as per specifications. (Ground - 2nd Floor)

LIFT Design, manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. LIFTS (With Machine Room) Design,manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. Elevator in Shaft of dimensions 2400 mm x 3000 mm (W x D) for minimum payload carrying capacity of 26 passenger/ 1768 kg (Duplex Control) having a travel speed of 0.75 metre/ sec and travel height of 18.0 Mtrs. (approx.) with 5 Stops and Microprocessor based control suitable for operation on 415 V, 50 Hz, 3 phase A.C. electric supply complete as per specifications. (Basement - 3rd Floor)

LIFT Design, manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. LIFTS (With Machine Room) Design,manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. Elevator in Shaft of dimensions 2400 mm x 3000 mm (W x D) for minimum payload carrying capacity of 26 passenger/ 1768 kg (Duplex Control) having a travel speed of 1.00 metre/ sec and travel height of 26.0 Mtrs. (approx.) with 5 Stops and Microprocessor based control suitable for operation on 415 V, 50 Hz, 3 phase A.C. electric supply complete as per specifications. (Basement - 5th Floor)

LIFT Design, manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. LIFTS (With Machine Room) Design,manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. Elevator in Shaft of dimensions 2400 mm x 3000 mm (W x D) for minimum payload carrying capacity of 26 passenger/ 1768 kg (Quarter Control) having a travel speed of 1.00 metre/ sec and travel height of 26.0 Mtrs. (approx.) with 7 Stops and Microprocessor based control suitable for operation on 415 V, 50 Hz, 3 phase A.C. electric supply complete as per specifications. (Basement - 5th Floor)

LIFT Design, manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. LIFTS (With Machine Room) Design,manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. Elevator in Shaft of dimensions 2450 mm x 3000 mm (W x D) for minimum payload carrying capacity of 20 passenger/ 1360 kg (Simplex Control) having a travel speed of 1.00 metre/ sec and travel height of 26.0 Mtrs. (approx.) with 7 Stops and Microprocessor based control suitable for operation on 415 V, 50 Hz, 3 phase A.C. electric supply complete as per specifications. (Basement - 5th Floor)

LIFT Design, manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. LIFTS (With Machine Room) Design,manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. Elevator in Shaft of dimensions 2150 mm x 2650 mm (W x D) for minimum payload carrying capacity of 20 passenger/ 1360 kg (Duplex Control) having a travel speed of 1.00 metre/ sec and travel height of 12.0 Mtrs. (approx.) with 4 Stops and Microprocessor based control suitable for operation on 415 V, 50 Hz, 3 phase A.C. electric supply complete as per specifications. (Ground - 3rd Floor)

LIFT Design, manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. LIFTS (With Machine Room) Design,manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. Elevator in Shaft of dimensions 2350 mm x 3050 mm (W x D) for minimum payload carrying capacity of 20 passenger/ 1360 kg (Duplex Control) having a travel speed of 1.50 metre/ sec and travel height of 25.0 Mtrs. (approx.) with 9 Stops and Microprocessor based control suitable for operation on 415 V, 50 Hz, 3 phase A.C. electric supply complete as per specifications. (Ground - 8th Floor)

LIFT Design, manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. LIFTS (With Machine Room) Design,manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. Elevator in Shaft of dimensions 2350 mm x 2350 mm (W x D) for minimum payload carrying capacity of 16 passenger/ 1088 kg (Six Lift Control) having a travel speed of 1.50 metre/ sec and travel height of 30.0 Mtrs. (approx.) with 8 Stops and Microprocessor based control suitable for operation on 415 V, 50 Hz, 3 phase A.C. electric supply complete as per specifications. (Ground - 7th Floor)

LIFT Design, manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. LIFTS (With Machine Room) Design,manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. Elevator in Shaft of dimensions 2350 mm x 2350 mm (W x D) for minimum payload carrying capacity of 16 passenger/ 1088 kg (Duplex Control) having a travel speed of 1.50 metre/ sec and travel height of 30.0 Mtrs. (approx.) with 9 Stops and Microprocessor based control suitable for operation on 415 V, 50 Hz, 3 phase A.C. electric supply complete as per specifications. (Ground - 8th Floor)

LIFT Design, manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. LIFTS (With Machine Room) Design,manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. Elevator in Shaft of dimensions 2350 mm x 2350 mm (W x D) for minimum payload carrying capacity of 16 passenger/ 1088 kg (Duplex Control) having a travel speed of 1.50 metre/ sec and travel height of 35.0 Mtrs. (approx.) with 12 Stops and Microprocessor based control suitable for operation on 415 V, 50 Hz, 3 phase A.C. electric supply complete as per specifications. (Ground - 11th Floor)

LIFT Design, manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. LIFTS (With Machine Room) Design,manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. Elevator in Shaft of dimensions 2350 mm x 2350 mm (W x D) for minimum payload carrying capacity of 16 passenger/ 1088 kg (Duplex Control) having a travel speed of 1.50 metre/ sec and travel height of 20.0 Mtrs. (approx.) with 7 Stops and Microprocessor based control suitable for operation on 415 V, 50 Hz, 3 phase A.C. electric supply complete as per specifications. (Ground - 6th Floor)

LIFT Design, manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. LIFTS (With Machine Room) Design,manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. Elevator in Shaft of dimensions 2350 mm x 2350 mm (W x D) for minimum payload carrying capacity of 16 passenger/ 1088 kg (Duplex Control) having a travel speed of 1.50 metre/ sec and travel height of 17.0 Mtrs. (approx.) with 6 Stops and Microprocessor based control suitable for operation on 415 V, 50 Hz, 3 phase A.C. electric supply complete as per specifications. (Ground - 5th Floor)

LIFT Design, manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. LIFTS (With Machine Room) Design,manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. Elevator in Shaft of dimensions 2350 mm x 2350 mm (W x D) for minimum payload carrying capacity of 16 passenger/ 1088 kg (Duplex Control) having a travel speed of 1.00 metre/ sec and travel height of 10.0 Mtrs. (approx.) with 4 Stops and Microprocessor based control suitable for operation on 415 V, 50 Hz, 3 phase A.C. electric supply complete as per specifications. (Ground - 3rd Floor)

LIFT Design, manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. LIFTS (With Machine Room) Design,manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. Elevator in Shaft of dimensions 2350 mm x 2350 mm (W x D) for minimum payload carrying capacity of 16 passenger/ 1088 kg (Duplex Control) having a travel speed of 1.00 metre/ sec and travel height of 10.0 Mtrs. (approx.) with 4 Stops and Microprocessor based control suitable for operation on 415 V, 50 Hz, 3 phase A.C. electric supply complete as per specifications. (Ground - 3rd Floor)

LIFT Design, manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. LIFTS (With Machine Room) Design,manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. Elevator in Shaft of dimensions 2350 mm x 2350 mm (W x D) for minimum payload carrying capacity of 16 passenger/ 1088 kg (Duplex Control) having a travel speed of 1.50 metre/ sec and travel height of 24.0 Mtrs. (approx.) with 8 Stops and Microprocessor based control suitable for operation on 415 V, 50 Hz, 3 phase A.C. electric supply complete as per specifications. (Ground - 7th Floor)

LIFT Design, manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. LIFTS (With Machine Room) Design,manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. Elevator in Shaft of dimensions 2350 mm x 2350 mm (W x D) for minimum payload carrying capacity of 16 passenger/ 1088 kg (Simplex Control) having a travel speed of 1.00 metre/ sec and travel height of 4.0 Mtrs. (approx.) with 2 Stops and Microprocessor based control suitable for operation on 415 V, 50 Hz, 3 phase A.C. electric supply complete as per specifications. (Ground - 1st Floor)

LIFT Design, manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. LIFTS (With Machine Room) Design,manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. Elevator in Shaft of dimensions 1950 mm x 2200 mm (W x D) for minimum payload carrying capacity of 13 passenger/ 884 kg (Duplex Control) having a travel speed of 1.50 metre/ sec and travel height of 16.0 Mtrs. (approx.) with 6 Stops and Microprocessor based control suitable for operation on 415 V, 50 Hz, 3 phase A.C. electric supply complete as per specifications. (Ground - 5th Floor)

LIFT Design, manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. LIFTS (With Machine Room) Design,manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. Elevator in Shaft of dimensions 2350 mm x 3050 mm (W x D) for minimum payload carrying capacity of 16 passenger/ 1088 kg (Simplex Control) having a travel speed of 1.50 metre/ sec and travel height of 22.0 Mtrs. (approx.) with 8 Stops and Microprocessor based control suitable for operation on 415 V, 50 Hz, 3 phase A.C. electric supply complete as per specifications. (Ground - 7th Floor)

(SPECIAL FOR OT) 10 mic flanged filter, for fixing in RA riser, with fixing frame, as per approved drawings, in OT rooms 750 mm wide, x 150 mm high, x 25 mm deep

Terminal mounted HOODED HEPA, H-14, casing in Aluminium PC / GIPC 610X610X150

Aluminium butterfly damper - for ceiling HEPA filter, 250 mm dia

Pre-insulated flexible duct, for HEPA connection, 250 mm dia, 1 M long, with fixing clamps

Variable frequency drive for AHU motors with weather proof enclosure 5.5 kW

Design, manufacture, supply, installation of D-skin blow through type, Air handling unit, with 22 g (0.76 mm) both side GIPC sheet, 25 mm thk PUF insulation, PUF density 42 kg/cum, thermal transfer barrier profile (TTB), DIDW backward curve fan, 1/2 in copper coil, PVC mist eliminator, SS 304 drain tray 16 g, marine lamp, door limit switch, suitable drive motor, pulley & v-belts (for belt driven fan), vibration isolator, fresh air damper, supply air damper, return air damper, 20 mic, 10 mic , 5 mic filter, 3 mic filter etc., all duly assembled, 10 mic, 5 mic & 3 mic filter to have MAGNEHELIC GUAGE 0 ...... 100 mm WC Fire damper for supply air & return air is a part of the AHU, and to be supplied along with the AHU . AHU 3500 cfm, 80 mm static, 9 TR cooling / 4 RD, 4 kW strip heater with thyrsitor control, AEROFOIL DIDW BW CURVE FAN 5.5 kW motor, DOUBLE DECKER CONSTRUCTION (20 mic, 10 mic, 5 mic flanged filter)

VRV/VRF AC SYSTEM OUT DOOR UNITS: Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above14HP modules, microprocessor based Controller, top discharge type condensing unit(s),with R410A Refrigerant, vibration isolators, with suitable foundation etc.complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V+/-10%, 3Phase,50HzAC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5. 10.0 HP

VRV/VRF AC SYSTEM OUT DOOR UNITS: Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above14HP modules, microprocessor based Controller, top discharge type condensing unit(s),with R410A Refrigerant, vibration isolators, with suitable foundation etc.complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V+/-10%, 3Phase,50HzAC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5. 12.0 HP

VRV/VRF AC SYSTEM OUT DOOR UNITS: Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above14HP modules, microprocessor based Controller, top discharge type condensing unit(s),with R410A Refrigerant, vibration isolators, with suitable foundation etc.complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V+/-10%, 3Phase,50HzAC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5. 22.0 HP

VRV/VRF INDOOR UNITS: INDOOR UNIT-CASSETTE TYPE Supply,installation,testing and commissioning of following minimum capacityVRV/VRFHigh wall type Indoor unit equipped with washable synthetic media pre-filter,fan section with low noise fan/dynamically balanced blower,multis peed motor,coil section with DX copper coil,electronic expansion valve, outer cabinet,cordless remote control,drainpan,necessary accessoriesetc,suitable for operationon 230V±10%,50Hz,single phase AC supply,complete as required. The unit shall have automatic force shut down provisionin case of fire on receiving signal from BMS System.The cooling capacity of indoor unit will be at air inlet conditions of 27Degree C DB and 19 Degree C WB temperature. 1.0 TR

VRV/VRF INDOOR UNITS: INDOOR UNIT-CASSETTE TYPE Supply,installation,testing and commissioning of following minimum capacityVRV/VRFHigh wall type Indoor unit equipped with washable synthetic media pre-filter,fan section with low noise fan/dynamically balanced blower,multis peed motor,coil section with DX copper coil,electronic expansion valve, outer cabinet,cordless remote control,drainpan,necessary accessoriesetc,suitable for operationon 230V±10%,50Hz,single phase AC supply,complete as required. The unit shall have automatic force shut down provisionin case of fire on receiving signal from BMS System.The cooling capacity of indoor unit will be at air inlet conditions of 27Degree C DB and 19 Degree C WB temperature. 1.6 TR

VRV/VRF INDOOR UNITS: INDOOR UNIT-CASSETTE TYPE Supply,installation,testing and commissioning of following minimum capacityVRV/VRFHigh wall type Indoor unit equipped with washable synthetic media pre-filter,fan section with low noise fan/dynamically balanced blower,multis peed motor,coil section with DX copper coil,electronic expansion valve, outer cabinet,cordless remote control,drainpan,necessary accessoriesetc,suitable for operationon 230V±10%,50Hz,single phase AC supply,complete as required. The unit shall have automatic force shut down provisionin case of fire on receiving signal from BMS System.The cooling capacity of indoor unit will be at air inlet conditions of 27Degree C DB and 19 Degree C WB temperature. 2.0 TR

DX AHU COMPATIBLE WITH VRV/VRF ODU Design, manufacture, supply, installation of D-skin blow through type, Air handling unit, with 22 g (0.76 mm) both side GIPC sheet, 25 mm thk PUF insulation, PUF density 42 kg/cum, thermal transfer barrier profile (TTB), DIDW backward curve fan, 1/2 in DX-copper coil, PVC mist eliminator, SS 304 drain tray 16 g, marine lamp, door limit switch, suitable drive motor, pulley & v-belts (for belt driven fan), vibration isolator, fresh air damper, supply air damper, return air damper, 20 mic, 10 mic , 5 mic filter, 3 mic filter etc., all duly assembled, 10 mic, 5 mic & 3 mic filter to have MAGNEHELIC GUAGE 0 ...... 100 mm WC Fire damper for supply air & return air is a part of the AHU, and to be supplied along with the AHU. AHU 3500 cfm, 120 mm static, 9 TR cooling / 4 RD, AEROFOIL DIDW BW CURVE FAN 5.5 kW motor, DOUBLE DECKER CONSTRUCTION (20 mic, 10 mic, 5 mic flanged filter)

DX AHU COMPATIBLE WITH VRV/VRF ODU Design, manufacture, supply, installation of D-skin blow through type, Air handling unit, with 22 g (0.76 mm) both side GIPC sheet, 25 mm thk PUF insulation, PUF density 42 kg/cum, thermal transfer barrier profile (TTB), DIDW backward curve fan, 1/2 in DX-copper coil, PVC mist eliminator, SS 304 drain tray 16 g, marine lamp, door limit switch, suitable drive motor, pulley & v-belts (for belt driven fan), vibration isolator, fresh air damper, supply air damper, return air damper, 20 mic, 10 mic , 5 mic filter, 3 mic filter etc., all duly assembled, 10 mic, 5 mic & 3 mic filter to have MAGNEHELIC GUAGE 0 ...... 100 mm WC Fire damper for supply air & return air is a part of the AHU, and to be supplied along with the AHU AHU 3500 cfm, 55 mm static SINGLE FLOOR, 10 TR cooling / 4 RD, AEROFOIL DIDW BW CURVE FAN 3.7 kW motor

DX AHU COMPATIBLE WITH VRV/VRF ODU Design, manufacture, supply, installation of D-skin blow through type, Air handling unit, with 22 g (0.76 mm) both side GIPC sheet, 25 mm thk PUF insulation, PUF density 42 kg/cum, thermal transfer barrier profile (TTB), DIDW backward curve fan, 1/2 in DX-copper coil, PVC mist eliminator, SS 304 drain tray 16 g, marine lamp, door limit switch, suitable drive motor, pulley & v-belts (for belt driven fan), vibration isolator, fresh air damper, supply air damper, return air damper, 20 mic, 10 mic , 5 mic filter, 3 mic filter etc., all duly assembled, 10 mic, 5 mic & 3 mic filter to have MAGNEHELIC GUAGE 0 ...... 100 mm WC Fire damper for supply air & return air is a part of the AHU, and to be supplied along with the AHU AHU 2000 cfm, 55 mm static SINGLE FLOOR, 5 TR cooling / 4 RD, AEROFOIL DIDW BW CURVE FAN 2.2 kW motor,

(SPECIAL FOR OT) 10 mic flanged filter, for fixing in RA riser, with fixing frame, as per approved drawings, in OT rooms 750 mm wide, x 150 mm high, x 25 mm deep

Terminal mounted HOODED HEPA, H-14, casing in Aluminium PC / GIPC 610X610X150

Aluminium butterfly damper - for ceiling HEPA filter, 250 mm dia

Pre-insulated flexible duct, for HEPA connection, 250 mm dia, 1 M long, with fixing clamps

Variable frequency drive for AHU motors with weather proof enclosure - 2.2KW

Variable frequency drive for AHU motors with weather proof enclosure - 3.7 KW

Variable frequency drive for AHU motors with weather proof enclosure - 5.5 kW

MAIN INTELLIGENT PROGRAMMABLE CENTRAL CONTROLLER: Supply, Installation, Testing and Commissioning of Central Controller of digital type of latest generation suitable for all VRV/VRF equipments/AHU to operate, Monitor, Scheduling Programme, On/Off, Temperature Setting etc as per specification complete as required to operate all the indoor units.

Y-JOINTS: Supply Installation, testing, commissioning of supply & return Y-joints sets of required size for refrigerant piping as per manufacturer standards. Y- Joints set

REFRIGERANT PIPING: Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation / with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thicknessas given below for Suction and Liquid lines, all accessories as per specifications etc. as required : - 6.4mm dia (OD) (Soft drawn) with tube thickness1.2mm with19mm thick insulation

REFRIGERANT PIPING: Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation / with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thicknessas given below for Suction and Liquid lines, all accessories as per specifications etc. as required : - 9.5 mm dia (OD) (Soft drawn) with tube thickness1.2mm with19mm thick insulation

REFRIGERANT PIPING: Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation / with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thicknessas given below for Suction and Liquid lines, all accessories as per specifications etc. as required : - 12.7 mm dia (OD) (Soft drawn) with tube thickness1.2mm with19mm thick insulation

REFRIGERANT PIPING: Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation / with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thicknessas given below for Suction and Liquid lines, all accessories as per specifications etc. as required : - 15.9 mm dia (OD) (Soft drawn) with tube thickness1.2mm with19mm thick insulation

REFRIGERANT PIPING: Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation / with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thicknessas given below for Suction and Liquid lines, all accessories as per specifications etc. as required : - 19.1 mm dia (OD) (Soft drawn) with tube thickness1.2mm with19mm thick insulation

REFRIGERANT PIPING: Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation / with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thicknessas given below for Suction and Liquid lines, all accessories as per specifications etc. as required : - 22.2 mm dia (OD) (Soft drawn) with tube thickness1.2mm with19mm thick insulation

REFRIGERANT PIPING: Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation / with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thicknessas given below for Suction and Liquid lines, all accessories as per specifications etc. as required : - 28.6 mm dia (OD) (Soft drawn) with tube thickness1.2mm with19mm thick insulation

AIR HANDLING UNIT KIT: Supply, installing, testing and commissioning of Electronic expansion valve & control kit compatible to connect the following Dx type AHU with the VRF outdoor unit, the AHU kit should be complete with Control box for flow of refrigerant so as to modulate the capacity of AHU as and when required in sync with VRF outdoor unit, the AHU kit should have corded remote control, and capability to control the AHU fan , speed of AHU Fan. - For AHU :(9-10 TR) (5.5kw motor)

AIR HANDLING UNIT KIT: Supply, installing, testing and commissioning of Electronic expansion valve & control kit compatible to connect the following Dx type AHU with the VRF outdoor unit, the AHU kit should be complete with Control box for flow of refrigerant so as to modulate the capacity of AHU as and when required in sync with VRF outdoor unit, the AHU kit should have corded remote control, and capability to control the AHU fan , speed of AHU Fan. - For AHU :(6.0 TR) (7.5kw motor)

Providing and fixing of PVC drain pipe of 6 Kg /cm2 pressure rating complete with 6mm thick closed cell nitrile rubber insulation with mechanical protection (Aluminium laminated face), fittings, supports, valves as per specifications & drawings. - 25 mm dia

Providing and fixing of PVC drain pipe of 6 Kg /cm2 pressure rating complete with 6mm thick closed cell nitrile rubber insulation with mechanical protection (Aluminium laminated face), fittings, supports, valves as per specifications & drawings. - 32 mm dia

SHEET METAL DUCT: Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. - Thickness 0.63 mm sheet (24 G)

SHEET METAL DUCT: Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. - Thickness 0.80 mm sheet (22 G)

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Thickness 0.63 mm sheet (24 G)

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Thickness 0.80 mm sheet (22 G)

Supply, fabrication, installation and testing of Aluminium ducts for OT's in accordance with the approved shop floor drawing complete with all accessories, bends, fittings, specials,chutes, vanes, necessary supportsetc.as per specification. 20 gauge Aluminium Ducting

Supplying, fixing. testing commissioningof GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, in accordance with approved shop drawings and specifications complete as required.

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.

Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications etc complete as required. - Fire Damper

Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications etc complete as required. - Actuator

Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications.

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class "O") insulation on existing duct after applying two coats of cold setting adhesive (CPR X compound). The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.- 19 mm

Supplying, installing and testing of extruded Aluminium Louvers with bird screen in accordance with approved shop drawings and specifications complete as required.

Supply, installation, testing & commissioning of thermal insulated flexible duct of following sizes duly supported at regular interval as per site requirement etc. complete as required as per specifications. 100 MM Dia

Supplying, fabricating, installing and testing of fire retardent double Canvas Flexible Connection for constructed of standard material as per the drawings/specifications.

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed copper conductor armoured cables including, anchor fastners on wall with suitable clamps, saddles fixing bolts connecting testing and commissioning etc as per specification complete as required. 4.0 core 6 Sq mm

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed copper conductor armoured cables including, anchor fastners on wall with suitable clamps, saddles fixing bolts connecting testing and commissioning etc as per specification complete as required. 4.0 core 10 Sq mm

Supply and erection of hot dip G.I. cable tray perforation not more than 17.5% for specific dimensions along with tees, bends. The cable tray shall be hang from ceiling/ fixed to wall with necessary angle/flat iron / hanging rod, for ceiling suspensions, clamps, anchor fastner, nuts, bolts, washers, not mor than 1.5 mtr. apart complete as per specification to complete the job. The tray shall be as follows :- 100 x 50 mm x 1.6mm thick

Supply and erection of hot dip G.I. cable tray perforation not more than 17.5% for specific dimensions along with tees, bends. The cable tray shall be hang from ceiling/ fixed to wall with necessary angle/flat iron / hanging rod, for ceiling suspensions, clamps, anchor fastner, nuts, bolts, washers, not mor than 1.5 mtr. apart complete as per specification to complete the job. The tray shall be as follows :- 150 x 50 mm x 1.6mm thick

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. - 25 mm dia. ISI marked, steel conduit

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. - 25 mm dia. ISI marked, PVC conduit

WIRING IN EXISTING CONDUIT / PVC CASING CAPPING WITH COPPER CONDUCTOR Supply,& drawing following sizes of FRLS PVC insulated copper conductor ,single core cable in the exixsting surface/reccessed steel/pvc conduit as required. - 2x 1.5Sq mm

WIRING IN EXISTING CONDUIT / PVC CASING CAPPING WITH COPPER CONDUCTOR Supply,& drawing following sizes of FRLS PVC insulated copper conductor ,single core cable in the exixsting surface/reccessed steel/pvc conduit as required. - 4x 2.5sq.mm

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing aling with existing surface/recessed conduit/submain wiring/cable as required. - 6 SWG

Inline Fans (Accoustically Insulated) Supply, installation, testing and commissioning of ducted Inline Fans of GSS construction duly powder coated (rectangular box type for upto 20 mm WG SP and circular type for 10 mm WG SP) with centrifugal blower and motor encased in sheet metal casing, canvas connection etc. The Fan motor shall be suitable for operation on 220 V± 10%, 50 Hz, 1 phase AC supply. The Fan assembly shall conform to specifications and in accordance with requirements of drawings and Schedule of Quantities. Air Quantity : 800 CFM Static Pressure : 10 mm wg Motorrating : As Required

Inline Fans (Accoustically Insulated) Supply, installation, testing and commissioning of ducted Inline Fans of GSS construction duly powder coated (rectangular box type for upto 20 mm WG SP and circular type for 10 mm WG SP) with centrifugal blower and motor encased in sheet metal casing, canvas connection etc. The Fan motor shall be suitable for operation on 220 V± 10%, 50 Hz, 1 phase AC supply. The Fan assembly shall conform to specifications and in accordance with requirements of drawings and Schedule of Quantities. Air Quantity : 700 CFM Static Pressure : 20 mm wg Motorrating : As Required

Inline Fans (Accoustically Insulated) Supply, installation, testing and commissioning of ducted Inline Fans of GSS construction duly powder coated (rectangular box type for upto 20 mm WG SP and circular type for 10 mm WG SP) with centrifugal blower and motor encased in sheet metal casing, canvas connection etc. The Fan motor shall be suitable for operation on 220 V± 10%, 50 Hz, 1 phase AC supply. The Fan assembly shall conform to specifications and in accordance with requirements of drawings and Schedule of Quantities. Air Quantity : 600 CFM Static Pressure : 10 mm wg Motorrating : As Required

Inline Fans (Accoustically Insulated) Supply, installation, testing and commissioning of ducted Inline Fans of GSS construction duly powder coated (rectangular box type for upto 20 mm WG SP and circular type for 10 mm WG SP) with centrifugal blower and motor encased in sheet metal casing, canvas connection etc. The Fan motor shall be suitable for operation on 220 V± 10%, 50 Hz, 1 phase AC supply. The Fan assembly shall conform to specifications and in accordance with requirements of drawings and Schedule of Quantities. Air Quantity : 500 CFM Static Pressure : 10 mm wg Motorrating : As Required

Inline Fans (Accoustically Insulated) Supply, installation, testing and commissioning of ducted Inline Fans of GSS construction duly powder coated (rectangular box type for upto 20 mm WG SP and circular type for 10 mm WG SP) with centrifugal blower and motor encased in sheet metal casing, canvas connection etc. The Fan motor shall be suitable for operation on 220 V± 10%, 50 Hz, 1 phase AC supply. The Fan assembly shall conform to specifications and in accordance with requirements of drawings and Schedule of Quantities. Air Quantity : 400 CFM Static Pressure : 10 mm wg Motorrating : As Required

Inline Fans (Accoustically Insulated) Supply, installation, testing and commissioning of ducted Inline Fans of GSS construction duly powder coated (rectangular box type for upto 20 mm WG SP and circular type for 10 mm WG SP) with centrifugal blower and motor encased in sheet metal casing, canvas connection etc. The Fan motor shall be suitable for operation on 220 V± 10%, 50 Hz, 1 phase AC supply. The Fan assembly shall conform to specifications and in accordance with requirements of drawings and Schedule of Quantities. Air Quantity : 300 CFM Static Pressure : 10 mm wg Motorrating : As Required

Inline Fans (Accoustically Insulated) Supply, installation, testing and commissioning of ducted Inline Fans of GSS construction duly powder coated (rectangular box type for upto 20 mm WG SP and circular type for 10 mm WG SP) with centrifugal blower and motor encased in sheet metal casing, canvas connection etc. The Fan motor shall be suitable for operation on 220 V± 10%, 50 Hz, 1 phase AC supply. The Fan assembly shall conform to specifications and in accordance with requirements of drawings and Schedule of Quantities. Air Quantity : 200 CFM Static Pressure : 10 mm wg Motorrating : As Required

Inline Fans (Accoustically Insulated) Supply, installation, testing and commissioning of ducted Inline Fans of GSS construction duly powder coated (rectangular box type for upto 20 mm WG SP and circular type for 10 mm WG SP) with centrifugal blower and motor encased in sheet metal casing, canvas connection etc. The Fan motor shall be suitable for operation on 220 V± 10%, 50 Hz, 1 phase AC supply. The Fan assembly shall conform to specifications and in accordance with requirements of drawings and Schedule of Quantities. Air Quantity : 100 CFM Static Pressure : 10 mm wg Motorrating : As Required

AXIAL FLOW FANS Supply, installation, testing and commissioning of AMCA certified for sound and air performance (FEG) Tube Axial fan complete with tube casing in MS standard construction powder coated, aluminium impeller with adjustable blade angles,vibration isolator and directly coupled to TEFC Sq.cage induction motor, suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. as per specification complete as required. Air Quantity :23000 CFM Static Pressure : 25 mm wg Duty : Fresh/Exhaust

AXIAL FLOW FANS Supply, installation, testing and commissioning of AMCA certified for sound and air performance (FEG) Tube Axial fan complete with tube casing in MS standard construction powder coated, aluminium impeller with adjustable blade angles,vibration isolator and directly coupled to TEFC Sq.cage induction motor, suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. as per specification complete as required. Air Quantity :18500 CFM Static Pressure : 25 mm wg Duty : Fresh/Exhaust

AXIAL FLOW FANS Supply, installation, testing and commissioning of AMCA certified for sound and air performance (FEG) Tube Axial fan complete with tube casing in MS standard construction powder coated, aluminium impeller with adjustable blade angles,vibration isolator and directly coupled to TEFC Sq.cage induction motor, suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. as per specification complete as required. Air Quantity :17500 CFM Static Pressure : 25 mm wg Duty : Fresh/Exhaust

AXIAL FLOW FANS Supply, installation, testing and commissioning of AMCA certified for sound and air performance (FEG) Tube Axial fan complete with tube casing in MS standard construction powder coated, aluminium impeller with adjustable blade angles,vibration isolator and directly coupled to TEFC Sq.cage induction motor, suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. as per specification complete as required. Air Quantity :18000 CFM Static Pressure : 25 mm wg Duty : Fresh/Exhaust

AXIAL FLOW FANS Supply, installation, testing and commissioning of AMCA certified for sound and air performance (FEG) Tube Axial fan complete with tube casing in MS standard construction powder coated, aluminium impeller with adjustable blade angles,vibration isolator and directly coupled to TEFC Sq.cage induction motor, suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. as per specification complete as required. Air Quantity :15500 CFM Static Pressure : 25 mm wg Duty : Fresh/Exhaust

AXIAL FLOW FANS Supply, installation, testing and commissioning of AMCA certified for sound and air performance (FEG) Tube Axial fan complete with tube casing in MS standard construction powder coated, aluminium impeller with adjustable blade angles,vibration isolator and directly coupled to TEFC Sq.cage induction motor, suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. as per specification complete as required. Air Quantity :15000 CFM Static Pressure : 25 mm wg Duty : Fresh/Exhaust

AXIAL FLOW FANS Supply, installation, testing and commissioning of AMCA certified for sound and air performance (FEG) Tube Axial fan complete with tube casing in MS standard construction powder coated, aluminium impeller with adjustable blade angles,vibration isolator and directly coupled to TEFC Sq.cage induction motor, suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. as per specification complete as required. Air Quantity :13000 CFM Static Pressure : 25 mm wg Duty : Fresh/Exhaust

AXIAL FLOW FANS Supply, installation, testing and commissioning of AMCA certified for sound and air performance (FEG) Tube Axial fan complete with tube casing in MS standard construction powder coated, aluminium impeller with adjustable blade angles,vibration isolator and directly coupled to TEFC Sq.cage induction motor, suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. as per specification complete as required. Air Quantity :11500 CFM Static Pressure : 20 mm wg Duty : Fresh/Exhaust

AXIAL FLOW FANS Supply, installation, testing and commissioning of AMCA certified for sound and air performance (FEG) Tube Axial fan complete with tube casing in MS standard construction powder coated, aluminium impeller with adjustable blade angles,vibration isolator and directly coupled to TEFC Sq.cage induction motor, suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. as per specification complete as required. Air Quantity :9000 CFM Static Pressure : 25 mm wg Duty : Fresh/Exhaust

AXIAL FLOW FANS Supply, installation, testing and commissioning of AMCA certified for sound and air performance (FEG) Tube Axial fan complete with tube casing in MS standard construction powder coated, aluminium impeller with adjustable blade angles,vibration isolator and directly coupled to TEFC Sq.cage induction motor, suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. as per specification complete as required. Air Quantity :8500 CFM Static Pressure : 20 mm wg Duty : Fresh/Exhaust

AXIAL FLOW FANS Supply, installation, testing and commissioning of AMCA certified for sound and air performance (FEG) Tube Axial fan complete with tube casing in MS standard construction powder coated, aluminium impeller with adjustable blade angles,vibration isolator and directly coupled to TEFC Sq.cage induction motor, suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. as per specification complete as required. Air Quantity :8000 CFM Static Pressure : 20 mm wg Duty : Fresh/Exhaust

AXIAL FLOW FANS Supply, installation, testing and commissioning of AMCA certified for sound and air performance (FEG) Tube Axial fan complete with tube casing in MS standard construction powder coated, aluminium impeller with adjustable blade angles,vibration isolator and directly coupled to TEFC Sq.cage induction motor, suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. as per specification complete as required. Air Quantity :7500 CFM Static Pressure : 20 mm wg Duty : Fresh/Exhaust

AXIAL FLOW FANS Supply, installation, testing and commissioning of AMCA certified for sound and air performance (FEG) Tube Axial fan complete with tube casing in MS standard construction powder coated, aluminium impeller with adjustable blade angles,vibration isolator and directly coupled to TEFC Sq.cage induction motor, suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. as per specification complete as required. Air Quantity :7000 CFM Static Pressure : 20 mm wg Duty : Fresh/Exhaust

AXIAL FLOW FANS Supply, installation, testing and commissioning of AMCA certified for sound and air performance (FEG) Tube Axial fan complete with tube casing in MS standard construction powder coated, aluminium impeller with adjustable blade angles,vibration isolator and directly coupled to TEFC Sq.cage induction motor, suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. as per specification complete as required. Air Quantity :6500 CFM Static Pressure : 20 mm wg Duty : Fresh/Exhaust

AXIAL FLOW FANS Supply, installation, testing and commissioning of AMCA certified for sound and air performance (FEG) Tube Axial fan complete with tube casing in MS standard construction powder coated, aluminium impeller with adjustable blade angles,vibration isolator and directly coupled to TEFC Sq.cage induction motor, suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. as per specification complete as required. Air Quantity :6000 CFM Static Pressure : 20 mm wg Duty : Fresh/Exhaust

AXIAL FLOW FANS Supply, installation, testing and commissioning of AMCA certified for sound and air performance (FEG) Tube Axial fan complete with tube casing in MS standard construction powder coated, aluminium impeller with adjustable blade angles,vibration isolator and directly coupled to TEFC Sq.cage induction motor, suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. as per specification complete as required. Air Quantity :4000 CFM Static Pressure : 20 mm wg Duty : Fresh/Exhaust

Supply, installation, testing and commissioning of AMCA certified for sound and air performance (FEG) Tube Axial fan complete with tube casing in MS standard construction powder coated, aluminium impeller with adjustable blade angles, vibration isolator and directly coupled to TEFC Sq.cage induction motor, suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. The complete fan assembly shall be BSEN-1210-3-2002/UL listed for 250 Deg C 2 hours in accordence with power ventilator for smoke control systems etc as per specification complete as required. Air Quantity : 39000 CFM basement Static Pressure : 30 mm wg Duty : Fresh/Exhaus

Supply, installation, testing and commissioning of AMCA certified for sound and air performance (FEG) Tube Axial fan complete with tube casing in MS standard construction powder coated, aluminium impeller with adjustable blade angles, vibration isolator and directly coupled to TEFC Sq.cage induction motor, suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. The complete fan assembly shall be BSEN-1210-3-2002/UL listed for 250 Deg C 2 hours in accordence with power ventilator for smoke control systems etc as per specification complete as required. Air Quantity : 7500 CFM basement Static Pressure : 20 mm wg Duty : Fresh/Exhaus

Supply, installation, testing and commissioning of Suitable SISW Backward /Forward Curved Exhaust Air Fan in double skin construction complete with TEFC Induction Motor, Drive Assembly, Base Frame, Vibration Isolators and other accessories etc as per specification complete as required. Capacity - 25000 CFM, 35 mm St. Pr.

Supply, installation, testing and commissioning of Suitable SISW Backward /Forward Curved Exhaust Air Fan in double skin construction complete with TEFC Induction Motor, Drive Assembly, Base Frame, Vibration Isolators and other accessories etc as per specification complete as required. Capacity - 7500 CFM, 35 mm St. Pr.

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. - Thickness 0.63 mm sheet

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. - Thickness 0.80 mm sheet

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. - Thickness 1.00 mm sheet

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. - Thickness 1.25 mm sheet

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. - Thickness 0.63 mm sheet

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. - Thickness 0.80 mm sheet

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. - Thickness 1.00 mm sheet

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. - Thickness 1.25 mm sheet

16 gauge MS duct work welded construction. Duct shall have fire rated coating compound. Fire rated coating compound used forconstruction of fire rated duct work shall be protected with minimum 0.7mm to 1mm nominal thickness tested to properties as per the requirements of BS 476: 6 & amp; 7, including non-combustibility Class O and fire propagation - Class 1 surface spread of flame & amp; materials in accordance with building regulations.

Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

Supplying, fabricating, installing and testing of fire retardent double Canvas Flexible Connection for constructed of standard material as per the drawings/specifications.

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.

Supply, installation and balancing of extruded aluminium powder coated air louvers complete with aluminium wire mesh bird screen as per specifications.

Exhaust air louvers (without volume control dampers)

Supply, Installation and testing of GI back draft gravity damper for fan in accordance with the approved shop floor drawings and specifications, and shall also confirm to the BIS specifications.

Supplying and installing following size of perforated paintedwith powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 100 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated paintedwith powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 150 mm width X 50 mm depth X 1.6 mm thickness

Supply of following size of 1.1KV grade multicore Copper conductor XLPE insulated & PVC sheathed armoured power cable as per IS: 7098 (Part-1) 1988 complete as required. 4C- 10 sq mm

Supply of following size of 1.1KV grade multicore Copper conductor XLPE insulated & PVC sheathed armoured power cable as per IS: 7098 (Part-1) 1988 complete as required. 4C- 6 sq mm

Supply of following size of 1.1KV grade multicore Copper conductor XLPE insulated & PVC sheathed armoured power cable as per IS: 7098 (Part-1) 1988 complete as required. 4C- 4 sq mm

WIRING IN EXISTING CONDUIT / PVC CASING CAPPING WITH COPPER CONDUCTOR Supply,& drawing following sizes of FRLS PVC insulated copper conductor ,single core cable in the exixsting surface/reccessed steel/pvc conduit as required. - 2x 1.5Sq mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. - 25 mm Dia

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. - 32 mm Dia

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. - 25 mm Dia

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. - 32 mm Dia

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required . Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

NON MEDICAL EQUIPMENTS MEDICAL GAS PIPELINE SYSTEM Medical Gas pipeline system (as per international standards) comprising of oxygen, carbon dioxide, nitrous oxide, AGSS, Air-4, Air-7, Vacuum outlets, manifolds, pressure alarms, fully automatic gas control system, Bed head panels, copper piping, cylinder banks, plant equipment such as compressors, Vacuum pumps etc. As per Specifications

MODULAR OPERATION THEATER MOT comprising of walls & ceiling system for operating area, steel framework, static dissipative flooring, laminar flow, double dome OT light, touch screen surgeon’s control panel, scrub station, X ray viewing screen, hatch box, automatic sliding doors, anesthesia pendent, surgeon pendent etc. With stainless steel technology. As per Specifications

Stainless steel Work Table Table is used for wet goods with undershelf. The table top is fabricated out of 16 SWG SS 304 qlty. ground and polished to a smooth surface without high edge sections. The table top frame is a complete assembly with front, back and two ends welded together at corners. Overall size 915mm x600x900Ht.

S.S. Vertical Sliding Door Sliding Door is used between clean and dirty areas in hospitals, pharmaceuticals etc. The sliding door is mounted on an existing wall opening. The door is made of stainless steel counter-balanced by built in counterweight. The door is provided with nylon wheels at the side for easy of movement. The door is made along with stainless steel cover plates for the wall opening. The door is provided with a built in safety lock which ensures the door from closing if the counterweight rope breaks. Opening 500 x 500mm

S.S. Control and packing table with drawer table with drawer is used for separation, control and packing of various sets of sterilized goods for wards, clinics, operation theatres etc. and is designed for standing and sitting workers. A removable hatch made of laminated particles board is provided. The hatch contains a SS drawer and a laminated particles board plate. Overall size: 2000mm L x 1400mm W

Stainless steel work table with two sink The bench top is fabricated out of 16SWG SS 304 qlty. ground and polished with smooth surface and edge section. The top is designed to give a stable work surface. The table top frame is a complete assembly with front, back and two ends welded together. The sinks are made of stainless steel with inside ground and polished. Each sink is provided with a drain valve and a strainer. On the bench top, just above the sinks mixer for hot and cold water connection is provided. Overall size 1500mmL x650mm Wx900mm Ht

Washer Disinfector Single door, suitable for cleaning and disaffection of surgical instruments, anesthetic equipment, suction bottles, cleaning buckets, general circulation goods, dental tray and glassware with a fully closed process. The washer disinfector, fully automatic, has an advanced micro-processor which controls all services, programming and statistic functions. For safety reasons the service and programming functions are coded. The door would be provided with interlocking system. The chamber is equipped with four spray arms which ensure good water penetration from all directions. Various attachments are provided to suit. the load to be washed. Suitable dosage of detergent can be preset with the dosing pump. The provision of a double wall with insulation in between enables the Washer Disinfector to run with minimum sound and heat emission. The wash chamber, the inside the door, the pipework system and the circulation arms are made entirely of stainless steel. Suitable for electrical operation on 400/440 volts, 3 phase, AC supply, electrical load 13 KW.Capacity of 275 ltrs.

Ultrasonic Cleaner Ultrasonic Cleaner of overall size 530mm L x 330mm W x350mm H Internal Dimensions: 505 x 300 x 200 mm, output frequency 35khz. Capacity 30 litres. The Ultrasonic cleaners are manufactured using Solid State technology For the Ultrasonic Generator and PZT Transducers for converting the electrical energy to mechanical vibrations in the cleaning liquid. The unit will be complete with a thermostat and a timer, insert basket for tank and tank cover. The unit is suitable for electrical operation on 220/240 Volts, single phase, 50 cycles, AC supply. Make:- NAT STEEL / GETINGE / STERIS/ PARICLAVE

Hot & Cold Water Sterilizer Hot & Cold Water Sterilizer consisting of two chambers, one for hot sterile water and the other for cold sterile water. Capacity of each chamber 40 litres. Operating pressure : 16 to 18 psi. and corresponding temperature of 121oC. The chamber will be made out of stainless steel fitted with self-sterilizing water and air filters, gauge glass, double acting valve, air vent valve, draw-off valve, relief valve, safety valve, etc.. The water sterile chamber will additionally be fitted with a cooling coil for circulation of cold water. The unit is suitable for electrical operation on 400/440 volts 3 phase, 50 cycles, AC supply, electrical load 12 KW.

Stainless steel Work Table Table is used for wet goods with undershelf. The table top is fabricated out of 16 SWG SS 304 qlty. ground and polished to a smooth surface without high edge sections. The table top frame is a complete assembly with front, back and two ends welded together at corners. Overall size 900 x 600 x 900 mm H.

Stainless steel racks with 5 shelves all sides open and stainless steel bullet feet. overall size 1830x535x1830mmH.

LAUNDRY EQUIPMENTS Make: Fabcare/ Ecoclean/ Globbus or equivalent GENERAL WARD / STAFF UNIFORMS / PATIENTS UNIFORM Barrier Washer Extractor, High Spin 50 Kg Capacity, Steam Heated.

Drying Tumbler Machine 30 Kg. cap. per charge. Steam Heated, Front loading type. * Rust proof machine for its entire life.

CRITICAL WARD / SLUICING WARD Barrier Washer Extractor, High Spin 18 Kg Capacity, Steam Heated.

Drying Tumbler Machine 15 Kg. cap. per charge. Steam Heated, Front loading type. * Rust proof machine for its entire life.

IRONING AND FINISHING EQUIPMETNS Flat Work Ironer Machine Single Roller, Steam heated Roller Heated Size of the roller 800 dia X 3000 MM length

Vacuum Steam Ironing Machine Size: 4’ x 2.5’ with all fittings. * Industrial Steam Iron * Iron Mat * Aluminum Shoe * Solenoid Valve Complete in all respect.

Mobile Table Size 2½’ X 10’.

Mobile Table Size 2½’ X 4’.

General Utility Press, Steam Heated, pneumatic operated. (without air compressor)

TRANSPORTATION & STORAGE FURNITURE Dry Linen Trolley (Cage Type) 50 Kg. cap.

Wet Linen Trolley (Box Type) 50 Kg. cap.

Fabcare Double Sink (S.S.), Scrubbing Station

Shelf Trolley with shelves and revolving wheels. 100 Kg. Capacity

Diesel Fired Boiler 600 Kg. cap. with diesel tank

Stainlesss Steel 316 carriage suitable for Rectangular Sterilizer

Stainlesss Steel 304 trolley suitable for above carriage

S.S. Control and packing table with drawer table is used for separation, control and packing of various sets of sterilized goods for wards, clinics, operation theatres etc. and is designed for standing and sitting workers. A removable hatch made of laminated particles board is provided. The hatch contains a SS drawer and a laminated particles board plate. Overall size: 2000mm L x 1400mm W

Stainless steel Work Table Table is used for wet goods with undershelf. The table top is fabricated out of 16 SWG SS 304 qlty. ground and polished to a smooth surface without high edge sections. The table top frame is a complete assembly with front, back and two ends welded together at corners. Overall size 1500mm x610x890Ht.

S.S. Vertical Sliding Door Door is used between clean and dirty areas in hospitals, pharmaceuticals etc. The sliding door is mounted on an existing wall opening. The door is made of stainless steel counter-balanced by built in counterweight. The door is provided with nylon wheels at the side for easy of movement. The door is made along with stainless steel cover plates for the wall opening. The door is provided with a built in safety lock which ensures the door from closing if the counterweight rope breaks. Opening 500 x 500mm

Stainless steel work table with two sink The bench top is fabricated out of 16SWG SS 304 qlty. ground and polished with smooth surface and edge section. The top is designed to give a stable work surface. The table top frame is a complete assembly with front, back and two ends welded together. The sinks are made of stainless steel with inside ground and polished. Each sink is provided with a drain valve and a strainer. On the bench top, just above the sinks mixer for hot and cold water connection is provided. Overall size 2400mmL x650mm Wx900mm Ht

Washer Disinfector Washer Disinfector, single door, suitable for cleaning and disaffection of surgical instruments, anesthetic equipment, suction bottles, cleaning buckets, general circulation goods, dental tray and glassware with a fully closed process. The washer disinfector, fully automatic, has an advanced micro-processor which controls all services, programming and statistic functions. For safety reasons the service and programming functions are coded. The door would be provided with interlocking system. The chamber is equipped with four spray arms which ensure good water penetration from all directions. Various attachments are provided to suit the load to be washed. Suitable dosage of detergent can be preset with the dosing pump. The provision of a double wall with insulation in between enables the Washer Disinfector to run with minimum sound and heat emission. The wash chamber, the inside the door, the pipework system and the circulation arms are made entirely of stainless steel. Suitable for electrical operation on 400/440 volts, 3 phase, AC supply, electrical load 13 KW Capacity of 275 ltrs.

Ultrasonic Cleaner Ultrasonic Cleaner of overall size 530mm L x 330mm W x350mm H Internal Dimensions: 505 x 300 x 200 mm, output frequency 35khz. Capacity 30 litres. The unit will be complete with a thermostat and a timer, insert basket for tank and tank cover. The unit is suitable for electrical operation on 220/240 Volts, single phase, 50 cycles, AC supply.

Stainless steel racks with 5 shelves, all sides open and stainless steel bullet feet. overall size 1830x535x 1830mmH.

Stainless steel table trolley with 2 shelves Stainless steel table trolley with 2 shelves is for use in the sterile goods store when batching sterile goods for delivery and also for short internal transport. The trolley is also suitable for use as a temporary storage or utility space at packing tables. The frame is mounted on 4nos. heavy duty swiveling castors for easy movement in narrow passages. Overall size 1080x530x800H

Gauze cutting machine with SS table size 900x600x750mm

Single Distilled Water Still Single Distilled Water Still, generally as per the Barnstead Type. The Still is guaranteed to produce pyrogen free and chemically pure water to comply with IP/BP Standards. The evaporator, the multi-baffle and the condenser will be made out of stainless steel with the joints welded. The condenser will be provided with stainless steel tubes, water inlet and outlet connection.The Water Still will be supplied in a ready to use condition mounted on a suitable stand.Water Still as above of capacity 20 litres, per hour suitable for electric operation on 400/440 volts, 3 phase AC supply, electrical load being 15 KW.

Stainless Storage tank, electric load 6 kw., capacity 120 litres.

Spray Gun Rinser attached with SS working table and SS sink Spray Gun Rinser with attachments is used for cleaning syringes, catheters, endoscopes, cystoscopes and variety of other instruments and articles used in sterile services.

Kitchen Equipments for Hospital Make: Electrolux/ Globbus or Equivalent MILK BOILER Cap.100Ltrs. S.S.Sheet insulated body with triple jacket. The water jacket will be fitted with 2 Kw heating element. Milk outlet, water level indicator & draw off valve at the bottom & water tank. Phillips element, Elcon thermostat, GVC rotary switch, LED indicator for Power, 4mm thickness 3 core wire

TEA BOILER Cap.100Ltrs. S.S.Sheet insulated body with triple jacket. The water jacket will be fitted with 2 Kw heating element. Milk outlet, water level indicator & draw off valve at the bottom & water tank. Phillips element, Elcon thermostat, GVC rotary switch, LED indicator for Power, 4mm thickness 3 core wire

MICROWAVE OVEN Cap.20-30Ltrs.

PICK UP COUNTER WITH OVERSHELF Size 1800X600X850+300 Top 3 sides, under & over shelf of s.s.sheet, on m.s.angle & s.s.tubular legs frame work. The counter will have 3 sides fully covered, operator side open. With one under shelf. One over shelf 300mm wide & running along the full length of counter u type heating element of 1 Kw is placed under the one head shelf to keep the dishes warm provided with toggle switch also connected with 4 mm 3 core wire.

WORK TABLE FOR SUPPORT OF TWO BURNER RANGE Size 1350x600x850mm Top & undershelf of s.s.sheet on m.s.anlge frame work & s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required.

TWO BURNER COOKING RANGE App. Size 1200X600X850mm Frame work of m.s.anlge duly painted, mounted on s.steel tubular legs with adjustable feet. Top & sides & under shelf of s.s.sheet. The range will be complete with 2nos. Hy-pressure gas burners with individual control valves. Cast iron pan support

FOR Community kitchen TWO BURNER COOKING RANGE App. Size 1200X600X850mm Frame work of m.s.anlge duly painted, mounted on s.steel tubular legs with adjustable feet. Top & sides & under shelf of s.s.sheet. The range will be complete with 2nos. Hy-pressure gas burners with individual control valves. Cast iron pan support

EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) FOR TWO BURNER RANGE Size 1950x750x600mm Made of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.

JUICER (table top model) Cast Aluminum/CI body, duly polished / painted, with worm & perforated insert. Top feeding tray. Worm easily cleanable fitted with 1/2HP elect. motor.

CONVEYOR TOASTER App. Cap. 100-125 Toasts/hr. S.S.Sheet body, having s.s.sheet conveyor belt. App.225mm wide. The unit will have heating elements on top & lower portion of conveyor belt with variable heat & speed control switch. (MADE IN ITALY)

WORK TABLE WITH SINK FOR JUICER STATION Size 1800x750x850+150 Top & Sink bowl of s.s.sheet, on s.s.anlge & s.s.tubular frame work with cross bracing at lower portion. Sink bowl will be integrally welded with top & grinded smooth. Sink bowl size 450x450x250mm.

WORK TABLE WITH SINK FOR IDLY STEAMER Size 1950x600x850+150 Top & Sink bowl of s.s.sheet, on s.s.anlge & s.s.tubular frame work with cross bracing at lower portion. Sink bowl will be integrally welded with top & grinded smooth. Sink bowl size 450x450x250mm.

UNDER COUNTER REFRIGERATOR WITH PICK UP SHELF Size 1200x600x850+450+300 Double walled 'PUF' insulated s.s.sheet outer & inner body of s.s.sheet 0.8mm thick having hinged doors with rubber gascuts. Inside s.s.wire shelves on adjustable channel frame complete with 'Kirloskar/Tecumesh' make compressor. Having condensor,

FOUR DOOR REFRIGERATOR App. Size 1200x675x2000mm Double walled, insulated 'PUF' body made of 0.8mm thick s.s.sheet. Inside chamber to have 4nos. S.s.wire shelves on adjustable channel. The unit will have 4 doors with magnatic rubber gascuts & locking provision. The condensing unit, consisting of 'Kirlos

WORK TABLE Size 1500X600X850mm Top & undershelf of s.s.sheet on m.s.anlge frame work & s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required.

EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) Size 1950x750x600mm Made of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.

WORK TABLE Size 1500X600X850mm Top & undershelf of s.s.sheet on m.s.anlge frame work & s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required.

DOSA PLATE O/S 1500X600X850 Framework made of m.s. angle of size 38x38x5mm and 25x25x5 mm. Top made of 16 mm thick m.s. plate with stainless steel channel for draining the excess oil from fry top. The verticals of the equipment are made of stainless steel of size 38 mm dia and cross

IDLY STEAMER (CAP. - 104 IDLY per batch) STD MODEL Made of stainless steel sheet, fitted with Elect. Controls.

EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) for low height burner Size 1650x750x600mm Made of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.

LOW HT. TABLE for supporting low height burner Size 750x750x600mm Specification same as that of work table but the table will be without undershelf & will have cross bracing support at lower portion.

LOW HT. BURNER Size 750x750x600mm Specification same as that of cooking range but the unit will be without undershelf, but will only have cross bracing support at lower portion.

EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) for 03 burner cooking range Size 1650x750x600mm Made of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.

THREE BURNER COOKING RANGE O/S 1800X600X850 Structure made of m.s. angle of size 38x38x5mm, duly rust proof painted. Top of 16Swg thick s.s.sheet. All four side covered up to height of app. 10” by 20Swg stainless steel sheet. Bottom stainless steel stripes sheets complete with gas burners.

WORK TABLE for support of 03 burner cooking range Size 1500X600X850mm Top & undershelf of s.s.sheet on m.s.anlge frame work & s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required.

EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) for bulk cooker/boiler & fryer Size 1950x750x600mm Made of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.

BULK COOKER/boiler TILTING TYPE Cap.160Ltrs. Specification same as Sno.13 but the frying pan will be Of rectangular shaped with 12”depth & a pouring lip & the unit will be fitted with v type high pressure gas burner with control valve & pilot lamp.

BULK FRYER TILTING TYPE Cap.100Ltrs. Triple jacketed body of stainless steel sheet, Inner most jacketed of 16g thick with 12g thick dish ended bottom, second wall for air gap of 18g stainless steel sheet & outer insulation jacket also of 18g stainless steel sheet. The unit will have counter

WET GRINDER Cap.15ltrs (1.0HP) Stainless steel sheet constd. Body with s.s.sheet constd. Revolving drum, cromium plated pillar support on m.s.angle frame work fitted with electric motor gear box & grinding stones & coconut scraper.

DOUGH KNEADING MACHINE (CROMPTON MOTOR 2.0 HP) App. Cap of Bowl 25Ltrs. S.S.Mixing bowl, with s.s.rod/strip mixing arm, mounted on steel tubular & sheet frame work duly painted. Complete with 1.0HP Elect. Motor with control switch.

POTATO PEELER Cap.15Kg./chrgs.(CROMPTON MOTOR 1.0 HP) 16 gauge Stainless steel sheet peeling drum, lined inside with Abrasive material, stainless steel /cast iron rotating peeling disc. Top of the drum will have a potato inlet door, waste Inlet provision peeled potato discharge door & waste water Outlet pipe

PULVeRISER (Std.) (CROMPTON MOTOR 1.0 HP) Stainless steel sheet body,20g thick. the unit will have A top feeding tray & a housing of stainless steel casting With grinding plates & 3 type of meshes for variable type Of grinding requirements. The unit will be fitted with 1.0 hp single Phase electric

WORK TABLE support of pulverisor Size 1500X600X850mm Top & undershelf of s.s.sheet on m.s.anlge frame work & s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required.

WORK TABLE WITH SINK for vegetable washing Size 1950x600x850+150 Top & Sink bowl of s.s.sheet, on s.s.anlge & s.s.tubular frame work with cross bracing at lower portion. Sink bowl will be integrally welded with top & grinded smooth. Sink bowl size 450x450x250mm.

CHOPPING BOARD for manual vegetable cutting size:- 1200X600X850mm Frame work made of s.s.anlge top will have P.P./Nylon Board for chopping 700x700x100mm chopping board.

VEGETABLE CUTTING MACHINE Aluminium casted body with ½ hp electric motor safety switch & double feed pusher for round flat & vertical shaped food items etc., the unit will be Table top model with easy to clean provision. Provided with 4 no cutting discs for slicing grating Dicing

CHAPPATI COLLECTION TABLE Size 1500X600X800 Top tray of 16G s.s.sheet, tray will have App.100mm ht. collor all around, mounted on s.s.tubular legs with adjustable feet & one s.s.sheet undershelf.

CHAPPATI ROLLING TABLE Size 2100x750x850mm Top & undershelf of s.s.sheet on m.s.anlge frame work & s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required. THREE SIDE CROSS BRACING MADE OF S.S. PIPE 1" DIA FOR UNDERNEATH STORAGE.

CHAPPATI PLATE CUM PUFFER Size 1800x750x850mm Frame work of m.s.anlge, mounted on s.s.tubular legs frame work. All sides pannels & undershelf of s.s.sheet, top plate 10mm thick mild steel with cast iron puffing grills for puffing of chappaties. Complete with 'V' shape LPG burners with individual cont

EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) for chapatti plate Size 1950x750x600mm Made of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.

FOOD TROLLEY WITH 4 ROUND PANS, 1 RICE TRAY & STORAGE beneath O/S 1350X750X900mm S.S.Sheet insulated body, Frame work of m.s.anlge of size 38x38x5mm, mounted on 4 castors (2 with brakes) of size 150mm top to have cutout for 4nos. Round pans for Dal, Subzi etc. with 1 rice tray & storage below. Three side covered with s.s.sheet with s.

TRAY CARRIER TROLLEY Size 1200X600X1200mm S.S.Bottom base shelf mount at 150mm with all four sides turned down 50mm in 12mm and secured to welded s.s.anlge frame work & PROVIDED WITH THREE NOS. OF DETACHABLE TRAYS CUM SHELFS UNIT WILL BE MOUNTED ON 4" PILLAR TYPE CASTORS WHEELS (2 NOS. WITH BRAKE & 2 NOS. WITHOUT BRAKE)

TRAY SET UP COUNTER WITH BAIN MARIE & DOUBLE OVERSHELVES Size 1800x600x850+375+225 Top of 16G s.s.sheet, Bain Marie water tank of 18G s.s.sheet, fitted with 3.0kw heating element with automatic temperature controller. Water outlet provision with drain valve, 3 sides covered with 20G s.s.sheet, Top to accommodate s.s.sheet Food Pans with GN pan 1x2x4" depth with lid 5 sets.

STORAGE CABINET Size 1200X600X850mm Top of 16Swg S.S.Sheet one over shelf, three sides of 20SWG s.s. sheet. Dish storage cabinet with 2 shelves and sliding door will be provided on service side.

STORAGE RACK Size 900X450X1800 Vertical of 32 mm dia stainless steel pipe with adjustable feet 4 no of 18 S.S Sheet at equaly distance.

INGREDIENT BINS Size 600X600X600mm Made of S.S. 18 SWG WITH TOP HINGE OPENABLE DOORS SUPPORT WITH FOUR NOS. OF CASTORS, anti crack body, top half hinged lid. Provided with a scoop.

DUNNAGE RACK Size 1200X600X500mm Made of s.s.square pipes of size 32x32mm, with support of 25mm square s.s.pipe.

DIGITAL WEIGHING SCALE CAP. 300KG

POT RACK-3 TIER Size 1200X600X1500mm Verticals of 32mmX32mm square s.s.pipe, 3 shelves welded with vertical frame of 19mm dia s.s.pipe shelves with equal space between two tubes mounted on adjustable feet.

SOILED DISH LANDING TABLE WITH GARBAGE CHUTE Size 2400x600x850mm Top of 16G s.s.sheet with 'Sunkun' top. A garbage chute provided on top with a space below to keep dust bin (Not part of equipment). The top will be mounted on m.s.anlge, rust proof painted & s.s.vertical tubular legs with cross bracing support on 3 sides

THREE SINK UNIT Size 1800x600x850+150mm Top & 3 sink bowls of 16G s.s.sheet. Duly welded, grinded & polished smooth mounted on m.s.anlge & s.s.tubular frame work with 150mm back splash. Each Sink Bowl Size 500x500x300mm (without sanitory fittings)

CLEAN DISH TABLE Size 2100x600x850mm Specification same as that of work table but with 2 undershelves.

CLEAN DISH RACK Size 900x450x1800mm Vertical of 32 mm dia stainless steel pipe with adjustable feet 5 no vertical at equal distance 1st shelf fixed at 150mm from floor level.

pot stacking platform for heavy pot storage Size 1500x750x150mm S.S Palate frame will be made of 1.5” S.S Square pipe with adjustable bullet feet. And shelf will be made of 2”x3mm S.S Flat Patti.

masala trolley Size 600x600x750mm

plateform trolley Size 900X600X900mm Structure will be made of 40x40x5mm duly painted with rust proof paint. Top will be made of 10 SWG. M.S Sheet. 6” high moving wheel (02 Break + 02 Moving)

PRE WASH SINK UNIT Size 1800x750x850+150 Top & Sink bowl of s.s.sheet, on s.s.anlge & s.s.tubular frame work with cross bracing at lower portion. Sink bowl will be integrally welded with top & grinded smooth. Sink bowl size 450x450x250mm.

HOOD TYPE COMMERCIAL DISHWASHER Cap. 40-50 Racks per Hr. CYCLE TIME TOTAL/RINSE (SEC) 60-120-180/20 BASKET SIZE 500X500 MM WATER CONSUMPTION 3L/CYCLE TANK CAPACITY 20L RINSE CAPACITY 12L WASH PUMP 1.1KW WASH TANK 3KW RINSE TANK 8KW MAXIMUM USED POWER 9.1 WATER HARDNESS 70-140 PPM WATER PRESSURE 2-4 BAR POWER SUPPLY 400/3+N-/50

DIRTY DISH UNLOADING TABLE Size 1500x600x850mm Top of stainless steel sheet, mounted on m.s.angle & stainless steel tubular frame work. One 18g thick stainless steel sheet bottom Shelf will be fitted on table at a ht dia 150mm from floor.

CLEAN DISH TABLE Size 2100x750x850mm Specification same as that of work table but with 2 undershelves.

COLD ROOM SECTION WALK IN CHILLER CUM FREEZER External Room Dimensions : 3600X3000mm CHILLER Room Temperature - (+ 2°C to 8 °C) Product Entering Temp - + 30°C Pull Down Time - 15hrs. Product Loading - App.550kg./24hrs. Wall & Ceiling Panels Insulation - 80mm thick Prefabricated RPUF Panels Floor Panel Insulation - 80mm thick RPUF Panels with layer of Tarfelt sheet on both sides. Panel Finish - Internal :PCGI , External: PCGI Refrigerant -R-22 No. of Units - 1 (MAKE:- KIRLOSKAR/TECUMSEH/CARRIER Connected Load - 2.5 KW

ALUMINIUM RACK FOR COLD ROOM Size 1100X500X1500 Vertical of 50x50x5mm aluminium angle with adjustable feet 4 no of 18 swg. Sheet perforated aluminium shelves..

ALUMINIUM PALLET FOR COLD ROOM STORAGE Size 1500X450X150MM Top made of 16 swg aluminum sheet placed with s.s. angle 35x35x4 frame work with adjustable bullet feet.

L.P.G GAS PIPE LINE (200 RUNNING FEET APPROX) ACTUAL MEASUREMENT WILL BE ACCORDING TO As per site conditions

CENTRIFUGAL EXHAUST BLOWER 20000 CFM

S.S GRATING for kitchen drainage trough (APPROX 40 RUNNING FEET) ACTUAL MEASUREMENT WILL BE ACCORDING TO As per site conditions

EXHAUST HOOD DUCTING (APPROX 2000 SQUARE FEET) ACTUAL MEASUREMENT WILL BE ACCORDING TO As per site conditions

M.S CYLINDER BANK 120"X36”X42” (ACCESSORIES ARE NOT INCLUDED) Totally constructed in MS angle base of 40x40x5 mm supported with 12mm square wrought iron bars. Front doors are provided along with the locking arrangements made up of 18 SWG CR sheet is duly premiered and painted to prevent from rust etc.

BIOMEDICAL WASTE MATERIAL MANAGEMENT (As per Specifications) Solid Waste Treatment Plant (for incinerable waste) Incinerator (Oil fired, 50kg/hr capacity) for Biomedical Solid Waste Management along with a dedicated ETP including related Civil, Electrical and Mechanical works Solid Waste Treatment Plant (for non-incinerable waste) Autoclave for bio-medical waste of 500 ltr capacity Shredder for bio-medical waste infrastructure such as air compressor, RO Plant, office furniture, computer etc. for main and stand by units Liquid Waste Treatment Plant Design, engineering, supply, installation and commissioning of- (I) 2(two) Nos. 150KLD STP, (II) 1(one) No. 10 KLD ETP for OT& laboratory washing and (III) 1(one) No. 500 ltrs/day ETP for SWTP washing

SIGNAGE FOR BUILDINGS Supplying & fixing of retro reflective sign plates of required size. The plate made of High intensity prismatic grade type IV retro reflective sheeting of 3M / Avery Denison or equivalent make approved by I.R.C. / M.O.S.T. with message and graphics to be overlay film/High intensity prismatic grade type IV retro reflective sheeting of 3M / Avery Denison or equivalent make approved by I.R.C. / M.O.S.T Reflective tape of same make duly plotter cut, of approved color, letters (single side) in white colour, to be pasted on 3mm thick ACP sheet of make Alstone / Alstrong / Eurobond / Alucobond or equivalent etc. as per drawings. The sign boards shall fixeed on wall/ roof duly fixed with rawls plugs stainless steel srew/ double side tape 3M make/ SS chain of required size of required nos of holes, wherever required complete as per direction of Unit Incharge

Supply and fixing of 18 gauge Stainless Steel plates with water jet cutting of grade 304 etching (engraved)signage plate of required size and letters duly bordred . Engraved portion painted of as per required colour/ approved colour (DUCO) of approved brand and filling with required matt/ mirror finish polish on base and border with shining polish of required shade and colour and duly fixed with required nos of rawls plugs stainless steel srew/ double side tape of 3M make/ nut bolt/ spacer required nos of holes, wherever required complete as per direction of Unit Incharge. (make Jindal or Equivalent)

Supply and fixing of Powder coated Aluminum Panel for directory of size 900mm x 750mm with partition of required Nos supported on aluminum channel 2 nos backiside with ACP sheet .Matter will Be digital print, matter covered with transprent polycarbonate sheet 0.5 mm wherever required completeand duly fixed with required nos of rawls plugs stainless steel srew/ spacer required nos of holes, wherever required complete as per direction of Unit Incharge

Supply and fixing of Amuminium Silver powder coated signage of reqired size complete with message. Matter will be digital print written single sides, matter covered with transparent polycarbonate sheet 0.5mm. and duly fixed with required nos of rawls plugs stainless steel srew/ double side tape of 3M make/ screw required nos of holes, wherever required complete as per direction of Unit Incharge

Supply and fixing of Amuminium Silver powder coated signage two plates ( vertical type) of reqired size complete with message. Matter will be digital print written both sides, matter covered with transparent polycarbonate sheet 0.5mm. and duly fixed with required nos of rawls plugs stainless steel srew/ double side tape of 3M make/ screw required nos of holes, wherever required complete as per direction of Unit Incharge

Providing & fixing of emergency sign boards single side of required size made of Photo luminescent film having glow power of 4 hours with message and graphics to be screen printing / vinyl cut film of 3M / Avery Denison / LG / Oracle or equivalent make to be pasted on 3mm thick Sun Board sheet all complete and duly fixed with required numbers of rawls plugs stainless steel srew/ double side tape of 3M make required nos of holes, wherever required complete as per direction of Unit Incharge

Providing & fixing of Glow-in-the-dark tape to mark safe lanes for pedestrians on the floors/ corridors to lead people to exit location. • Clearly visible in a dark room for 4 + hours • UV and chemical resistant • Strong adhesive Clearly designate aisle ways and emergency pathways in the dark condition. The surface should be cleaned thoroughly before sticking the tape with cleaning agents. Size: 4” Arrow size – green color.

Supply & Fixing Display notice pinup board of required size, aluminum beeding of 12 mm and fixed with required numbers of rawls plugs stainless steel srew as per direction of Unit Incharge.

Supply & Fixing Key ring holder stand of size 900mm x 600mm. Front door covered with transparent acyrlic shhet and locking arrangment. Fixed with required numbers of rawls plugs stainless steel srew as per direction of Unit Incharge.

Supplying and fixing of 18 gauge Stainless Steel Key Rings 1.245 mm thick (18 gauge) Stainless Steel plates of grade 304 etching (engraved)signage plate of Size 50mm x 38mm of and letters duly bordred as per sample approved and all as per sample. Engraved portion painted of as per required colour/ approved colour (DUCO) of approved brand written bth sides and filling with required matt/ mirror finish polish on base and border with shining polish of required shade and colour as per direction of Unit Incharge

Supply & placing of Stainless Steel 304 series Dustbin of size 300 x 175 as per direction of Unit Incharge.

Supply & placing of Stainless Steel 304 series Dustbin with foot operated of size 356 mm x 584 mm with plastic bucket as per direction of Unit Incharge.

Supplying of Q Manager made of hollow stainless steel pipe of 18 gauge and 900 mm high including 1.30 mtr and 50mm width long ribbon etc. all complete as per direction of Unit Incharge.

Provinding and fixing transparent logos/ Letters made out of etching tape 3M sparkle type on the lean glass surface with plain water, scraping glass before fixing film with blade, spray soap solution on glass squeeze excess water and air bubbles. All as directed of approved shape and sizes etc fixed with of required size as required as per direction of Unit Incharge. Make 3M/ Avery Denson

Supply & Fixing signages for exit of size 375mm x 200mm x 8mm in acrylic sheet LED light with battary backup

Supply & fixing of signboard made out of 3mm thick sun board with face fully covered with digital print of approved shade and make. The sign board should be fixing on wall,fixed with four rawls plugs stainless steel srew/ double side tape of 3M make required nos of holes, wherever required complete as per direction of Unit Incharge.

FOR EXTERNAL Supplying & fixing of retro reflective sign plates of required size. The plate made of High intensity prismatic grade type IV retro reflective sheeting of 3M / Avery Denison or equivalent make approved by I.R.C. / M.O.S.T. with message and graphics to be overlay film/High intensity prismatic grade type IV retro reflective sheeting of 3M / Avery Denison or equivalent make approved by I.R.C. / M.O.S.T Reflective tape of same make duly plotter cut, of approved color, letters (single side) in white colour, to be pasted on 3mm thick ACP sheet of make Alstone / Alstrong / Eurobond / Alucobond or equivalent etc. as per drawings. The sign boards shall fixeed on wall/ roof duly fixed with rawls plugs stainless steel srew/ double side tape 3M make/ SS chain of required size of required nos of holes, wherever required complete as per direction of Unit Incharge

Supply and fixing of 18 gauge Stainless Steel plates with water jet cutting of grade 304 etching (engraved)signage plate of required size and letters duly bordred . Engraved portion painted of as per required colour/ approved colour (DUCO) of approved brand and filling with required matt/ mirror finish polish on base and border with shining polish of required shade and colour and duly fixed with required nos of rawls plugs stainless steel srew/ double side tape of 3M make/ nut bolt/ spacer required nos of holes, wherever required complete as per direction of Unit Incharge. (make Jindal or Equivalent)

Supply and fixing of Powder coated Aluminum Panel for directory of size 900mm x 750mm with partition of required Nos supported on aluminum channel 2 nos backiside with ACP sheet .Matter will Be digital print, matter covered with transprent polycarbonate sheet 0.5 mm wherever required completeand duly fixed with required nos of rawls plugs stainless steel srew/ spacer required nos of holes, wherever required complete as per direction of Unit Incharge

Supply and fixing of Amuminium Silver powder coated signage of reqired size complete with message. Matter will be digital print written single sides, matter covered with transparent polycarbonate sheet 0.5mm. and duly fixed with required nos of rawls plugs stainless steel srew/ double side tape of 3M make/ screw required nos of holes, wherever required complete as per direction of Unit Incharge

Supply and fixing of Amuminium Silver powder coated signage two plates ( vertical type) of reqired size complete with message. Matter will be digital print written both sides, matter covered with transparent polycarbonate sheet 0.5mm. and duly fixed with required nos of rawls plugs stainless steel srew/ double side tape of 3M make/ screw required nos of holes, wherever required complete as per direction of Unit Incharge

Providing & fixing of emergency sign boards single side of required size made of Photo luminescent film having glow power of 4 hours with message and graphics to be screen printing / vinyl cut film of 3M / Avery Denison / LG / Oracle or equivalent make to be pasted on 3mm thick Sun Board sheet all complete and duly fixed with required numbers of rawls plugs stainless steel srew/ double side tape of 3M make required nos of holes, wherever required complete as per direction of Unit Incharge

Providing & fixing of Glow-in-the-dark tape to mark safe lanes for pedestrians on the floors/ corridors to lead people to exit location. • Clearly visible in a dark room for 4 + hours • UV and chemical resistant • Strong adhesive Clearly designate aisle ways and emergency pathways in the dark condition. The surface should be cleaned thoroughly before sticking the tape with cleaning agents. Size: 4” Arrow size – green color.

Supply & Fixing Display notice pinup board of required size, aluminum beeding of 12 mm and fixed with required numbers of rawls plugs stainless steel srew as per direction of Unit Incharge.

Supply & Fixing Key ring holder stand of size 900mm x 600mm. Front door covered with transparent acyrlic shhet and locking arrangment. Fixed with required numbers of rawls plugs stainless steel srew as per direction of Unit Incharge.

Supplying and fixing of 18 gauge Stainless Steel Key Rings 1.245 mm thick (18 gauge) Stainless Steel plates of grade 304 etching (engraved)signage plate of Size 50mm x 38mm of and letters duly bordred as per sample approved and all as per sample. Engraved portion painted of as per required colour/ approved colour (DUCO) of approved brand written bth sides and filling with required matt/ mirror finish polish on base and border with shining polish of required shade and colour as per direction of Unit Incharge

Supply & placing of Stainless Steel 304 series Dustbin of size 300 x 175 as per direction of Unit Incharge.

Supply & placing of Stainless Steel 304 series Dustbin with foot operated of size 356 mm x 584 mm with plastic bucket as per direction of Unit Incharge.

Supplying of Q Manager made of hollow stainless steel pipe of 18 gauge and 900 mm high including 1.30 mtr and 50mm width long ribbon etc. all complete as per direction of Unit Incharge.

Provinding and fixing transparent logos/ Letters made out of etching tape 3M sparkle type on the lean glass surface with plain water, scraping glass before fixing film with blade, spray soap solution on glass squeeze excess water and air bubbles. All as directed of approved shape and sizes etc fixed with of required size as required as per direction of Unit Incharge. Make 3M/ Avery Denson

Supply & Fixing signages for exit of size 375mm x 200mm x 8mm in acrylic sheet LED light with battary backup

Supply & fixing of signboard made out of 3mm thick sun board with face fully covered with digital print of approved shade and make. The sign board should be fixing on wall,fixed with four rawls plugs stainless steel srew/ double side tape of 3M make required nos of holes, wherever required complete as per direction of Unit Incharge.

Any other unseen item of work which are not covered in this BOQ that may be required at site during execution having an estimated provision of Rs.42,23,124.00. The rate for the items will be finaliased as per current APWD SOR in proportion to the quoted amount and the estimated amount.