Design, Manufacture, Supply, Erection, Testing and Commissioning of 11 kV KIOSK consisting of 1 incomer, 2 outgoing feeders cubicles supplied with 11 kV vacuum circuit breakers, CTs, VTs, protective relays and multi-function meter etc., complete including dismantling of the existing equipment at Bhadra Generating Station.

Design, Manufacture, Supply, Erection, Testing and Commissioning of 11 kV KIOSK consisting of 1 incomer, 2 outgoing feeders cubicles supplied with 11 kV vacuum circuit breakers, CTs, VTs, protective relays and multi-function meter etc., complete including dismantling of the existing equipment at Bhadra Generating Station.

DAS Specification Compact RMU (VCB/SF6 Type) as per IEC-62271The DAS RMUs shall have the following in addition to the Standards:

a) DC motors, Numerical Relays, Multi-functional meters, fault passage...

Fixing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel initial filling of oil etc....

Dismantling of existing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel initial fi...

Erection, alignment and fixing to the foundation, indoor/outdoor 11 kV switchgear panel/unit including movement from the point of unloading to the point of erection 11 kV Kiosk as specified in Section...

Testing & Commissioning ,Wiring: Identification of wires, ferruling, crimping & termination of wires for annunciation, etc., Testing of relays, CTs, PTs & Breaker for operation,For single 11 kV panel ...

Testing & Commissioning ,Wiring: Identification of wires, ferruling, crimping & termination of wires for annunciation, etc., Testing of relays, CTs, PTs & Breaker for operation,For additional 11 kV pa...

Grounding of equipment with 50 x 6 mm G.I. Flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and conne...

Supply of indoor type end termination kits (1 Set =3 nos.)

as specified in Section-III, Technical Specifications and Scope of work. NOTE:The rates quoted shall exclusive of GST and inclusive of all o...

Supply of outdoor type end termination kits (1 Set=3 nos.)

as specified in Section-III, Technical Specifications and Scope of work. NOTE: The rates quoted shall exclusive of GST and inclusive of all ...

Cable Joint and wiring HT UG Cable Heat shrinkable Straight Through Joint 3x95 to 3x150 Sqmm for 11KV 120 Sqmm, 3 Core XLPE cable as specified in Section-III, Technical Specifications and Scope of wor...

Supplying & Laying cable trays including welding, fixing of supports Cable tray of 300 mm width (suitable for cable duct of D type)

as specified in Section-III, Technical Specifications and Scope of ...

Supply of 19 core, 2.5 Sqmm copper control cable for protection, remote indication, annunciation and operation from 11KV kiosk to control room of BGS 19C x 2.5 Sq mm as specified in Section-III, Techn...

Releasing of HT cable after excavation refilling, consolidation Rewinding to the drum etc., 11KV 120 Sqmm, 3 Core XLPE cable as specified in Section-III, Technical Specifications and Scope of work. NO...

Laying of 11 kV cables in existing trench/G.I. pipe/stoneware pipe/RCC hume pipe using wooden/aluminium rollers as directed by KPTCL staff 3x95 to 150 Sqmm as specified in Section-III, Technical Speci...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm as specified in Section-III, Technical Specificat...

Supply of essential spares

Breaker Closing coil -2 Nos.

Breaker Tripping Coil - 2 Nos.

Breaker Fixed and moving contacts- 1 No.

Breaker Spring Charging Motor- 1 No.

HT Fuses- 3 Nos.

Electromechanic...