Interior Furnishing work of Marketing and Sourcing hub of Utkalika at Rasulgarh, Bhubaneswar.

Amount

INTERIOR WORK

GYPSUM FALSE CEILLING:

Providing & fixing gypboard suspended false ceiling with 12.5mm thick MR Ultra Gyp board (Single Layer) Gyproc make with drop ceiling as per approved design with cove light provision for different spaces as per the requirement with G.I. framework(Gypsteel) of perimeter channels, intermediate, channels and ceiling sections) and 12.5mm taped edge gypboard(MR) screw fixed to ceiling section as per design, complete with fixing and finishing of tapered and square edges of board with jointing compound paper tape with 2 coats of plastic emulsion paint over suitable primer of Berger/ Asian paint make including all cost of materials, labour, overheads T&P etc. complete as per the direction of the Engineer in-charge.

DisplayRacks Providing and fixing display racks of 2400mm ht. various sizes in proper position of shelves as per approved design (32mm, 450mm depth, side thickness 100mm) with lower drawer system made up of fire retardant ply board and block board of Century/Archid/ Greenply /sonear make, exposed member as per drawing to be finished with 1mm thick laminate of approved make (Marino/Greenlam-code 693,5375,777) and shade and design. The inner unexposed will be finished with 0.8 mm thick laminate and 12mm glass shelves of approved make including all fittings & fixtures complete as direction of Engineer in-charge.

Cupboard Providing and fixing cupboard racks of 2400mm ht. various sizes in proper position of shelves as per approved design (32mm, 450mm depth, side thickness 100mm) with lower drawer system made up of fire retardant ply board and block board of Century/Archid/ Greenply /sonear make, exposed member as per drawing to be finished with 1mm thick laminate of approved make (Marino/Greenlam-code 693,5375,777) and shade and design. The inner unexposed will be finished with 0.8 mm thick laminate of approved make including all fittings & fixtures complete as direction of Engineer in-charge.

DisplayCum/salesCounter Providing and fixing 750mm width X 900mm height display counters with side support made up of 19mm ply, 12mm glass table top, side glass and front glass as specified in the drawing of various sizes in proper position, made of 19mm fire retardant ply of Century /Archid / Greenply / Sonear make Exposed member as per drawing to be finished with 1mm thick laminate of approved make and shade and design. The inner unexposed will be finished with 0.8mm thick laminate complete in all respect as per the direction of Engineer-in-charge.

OfficeTable Providing and fixing 750mm width X 900mm height display counters with side support made up of 19mm ply, table top, side and front as specified in the drawing of various sizes in proper position, made of 19mm fire retardant ply of Century /Archid / Greenply / Sonear make Exposed member as per drawing to be finished with 1mm thick laminate of (Greenlam -code-693,5375,777) approved make and shade and design. The inner unexposed will be finished with 1 mm thick laminate complete in all respect as per the direction of Engineer-in-charge.

Providing and fixing display box with side support made up of 19mm ply, table top, side and front as specified in the drawing of various sizes in proper position, made of 19mm fire retardant ply of Century /Archid / Greenply / Sonear make Exposed member as per drawing to be finished with 1mm thick laminate of (Greenlam -code-693,5375,777) approved make and shade and design. The inner unexposed will be finished with 1 mm thick laminate complete in all respect as per the direction of Engineer-in-charge.

Reception and cash Counter Table Providing and fixing in proper position, curved shape reception table of 2100 mm X 750mm made of 19mm BWP ply with drawers shelves and shutters make in 12/19mm ply as specified in the drawing drawers to be mounted on telescopic channels provision for key boards cable manager, auto hinges handle and drawer locks, exposed member as per drawing to be finished with 1mm thick laminate of approved make and shade and design with 12mm thick frosted glass on the top as per design. The inner unexposed will be laminated and complete in all respect as per the instruction of Engineer in charge

Providing fitting and fixing of customer stools / chairs of any reputed make Godrej / Methodex / Supreme etc. as direction of Engineer-in-Charge.

Ground Floor

Providing, fitting and fixing of very high back executive chair, pedestral base with chrome finish with five wheels, arm material is Pu foam bounded chrome coated, seat material is PU foam covered is pure leather, material of back cover / back rest is leather and central tilt, overal chair high 1050mm , back rest hight 730mm, back rest width 530mm seat hight 450mm etc. as direction of Engineer in-Charge.

Providing, fitting and fixing of conference revolving chair pedestral is base with chrome finish with five wheels, arm material is Pu foam bounded chrome coated, seat material is PU foam covered is pure leather, material of back cover / back rest is leather and central tilt, overal chair high 1050mm , back rest hight 730mm, back rest width 530mm seat hight 450mm etc. as direction of Engineer in-Charge.

Providing, fitting and fixing in position work station chair pdestral is base made of ABS plasting with ABS / NYLON twin caster wheels, arm material is propylene, seat material is PU foam covered with fabric, material of fabric back cover / back rest is mesh fabric, material seat cover is polister fabric chair type is push back over hight of chair is 950mm back rest hight and width is 520mm and 440mm seat hight , width and depth is 450mm, 500mm and 480mm etc. as direction of Engineer in-Charge.

Providing, fitting and fixing in positing of five seater (3 seater + 2nos one seater) loung of godrej interio, supreme make. Made of 18 mm tik plywood with front seat cushion material. Covering material of seat and back rest is leather fabric dimension 3 seater is 1850mm in length 850mm in height etc as direction of Engineer in-Charge.

Providing, fitting and fixing of glass top centre table of reactngular shape made of tempered glass (18mm ) and tik wood dimension table is 1219mm x 711mm x 380mm as direction of Engineer in-Charge.

Supply fitting and fixing in position MAC blinds (regular vertical blind 89mm) complete as specified and directed Engineer-in-Charge.

Providing & Fixing of wall peneling with BWP Block Board/ply laminate with anyLaminart/mirror etc. finished in all respect as per approved drawing & requirement complete as per direction of Engineer in-charge. (Greenlam-code-693,5375,777)

Providing and Fixing of WPC board for Ground floor close window with all respect as per approved drawing & requirement complete as per direction of Engineer in-charge.

High pressure laminate with alluminum frame work covering with 3mm exterior grade of approved make finished in all respect with cost of all materials, labour, scafolding etc complete as per direction of Engineer in-charge.

Supply fitting fixing of digital sign board of approved design and lighting system with all cost of material and labour etc. to be provided on the front and back side facet to match the elevation of the building in position as per direction of Engineer in Charge.

P/F/F. of 12 mm toughened glass door with Patch fitting & swing door with locking arrangement in patchfittings as well as ss 40mm dia, and approx.600 mm long approved etc complete as per direction of Engineer in-charge.

ELECTRICAL WORK

Supply of all required materials and recessed(concealed) wiring to proposed light points/fan/exhaust fan/call bell points with 2(1x1.5sqm.) PVC insulated 1000v grade FRLS copper were run inside 19 mm PVC conduit pipe of 14 SWG or flexible conduit pipe laid on surface concealed in wall/ceiling alongwith 1(1x1.5sqm) PVC insulated FRLS copper were as earth continuity conductor fixing of 6A-240V modular type switch and complete in all respect including with use of clip-in- type modular plates, boxed, switches, ceiling roses, junction boxes with Bakelite cover as specified and making good to the damages caused and complete as per direction of EIC.

i)Primary light points :

ii)Secondary light points

Supply of all required materials and recessed wiring to circuit/sub-mains with following number & sizes of PVC insulated FRLS 1100v. grade standard copper wire run inside 19mm PVC conduct(14SWG) pipe laid on surface of wall/ceiling and copper wire as earth continuity conductor and complete in all respect including making good to all damages caused and as per the direction of EIC.

Recessed wiring with 2(1x1.5sqm)+1x(1x1.5sqm)copper wire for looping purpose and for AC IDU.

Recessed wring with 2(1x2.5sqm)+1x(1x1.5sqm) copper wire from LDB to SB, and computer point.

Recessed wiring with 2(1x4sqm)+1x(1x2.5sqm) copper wire from LDB to individual 16 Amp socket.

Supply, delivery, installation & testing of following Plug Boards including inter- connections and making good the damages caused complete as required and as per Direction of Engineer-In-Charge. MAKES:LEGRAND /L & T /HAGGER

10 / 20 Amp. Plug Boards consisting of a 20 Amp. Clip-in type Modular Switch with Indicator and a 10/20 Amp. Clip-in type Modular shuttered Plug Socket fixed on Metallic Concealed Box.

Wiring for Circuits and Submain with following number & sizes of PVC insulated 1100 Volt Grade Multistranded Copper Conductor FRLS Wire run inside 2 mm thick PVC Conduit Pipe Recessed in Ceiling / Column / Walls of Building including supply of all materials such as wires, PVC Conduit, Junction Box & Pull Box etc. complete with making good the damages caused as required and as per Direction of Engineer-In-Charge. MAKE:FINOLEX / V GUARD / POLYCAB / HAVELLS

2 Nos. Single Core 2.5 mm2 Copper Wire for Phase and Neutral and 1 No. Single Core 1.5 mm2 Copper Wire for Earth Continuity Conductor as per SLD (from LDB to Room & Power Point and Common Light Point looped).

2 Nos. Single Core 4.0 mm2 Copper Wire for Phase and Neutral and 1 No. Single Core 2.5 mm2 Copper Wire for Earth Continuity Conductor as per SLD.

4 Nos. Single Core 6.0 mm2 Copper Wire for Phase and Neutral and 2 Nos. Single Core 4 mm2 Copper Wire for Earth Continuity Conductor as per SLD.

Supply, delivery, installation and testing of Telephone Outlet Boards containing a Clip-in type Modular Telephone Socket with Top fixed on GI concealed Modular Switch Board including Connections & making good the damages caused complete as required and as per Direction of Engineer-In-Charge.

Wiring to Telephone Socket Outlet from Junction Box with 0.5 mm2 Twin Pair Copper Conductor Telephone Wire run inside prelaid PVC Conduit complete including termination, testing etc complete as required and as per Direction of Engineer-In-Charge.

Supply, delivery, installation, testing & commissioning of Indoor Wall mounted type Telephone Distribution Box having following number of Junctions made out of 1.6 mm thick CR sheet steel duly premiered & painted with enamel paint having hinged front door, testing facility having provision for cable / conduit entry complete as per Direction of Engineer-In-Charge.

Junction box suitable for 20 Pair Telephone Cable Termination.

Supply, delivery, installation and testing of TV Antenna Outlet Boards containing a Modular type TV Antenna Socket fixed on Modular Concealed Box including connections and making good the damages caused complete as required and as per Direction of Engineer-In-Charge.

Supply, delivery, installation and testing of TV Antenna Wires RG6 in PVC Pipe and making good the damages caused complete as required and as per Direction of Engineer-In-Charge.

Supply, delivery and laying of following sizes of 2 mm Wall thickness rigid PVC Conduit Concealed in Wall/ Column/ Roof Slab of the Building or mounted on surface along with other accessories and 18 SWG GI Fish Wire complete for Telephone / TV / Computer / Circuit or Sub main wiring as required & as per Direction of Engineer-In-Charge.

20 mm dia.

25 mm dia.

Supplying, delivery, installation, testing and commissioning of Flush mounted Cat 6 Information Outlet Box.

Supplying, laying of Cat 6 Wire in prelaid PVC Pipe.

DISTRIBUTION BOARDS:

Supply, delivery, installation, testing & commissioning of L.T. Indoor Wall mounted Double Door type Distribution Boards of Original Factory made enclosures of the same Brand as the MCB conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per the Direction of Engineer-In-Charge. MAKE: LEGRAND / L& T/ HAGGER

Light Distribution Board :Each Unit (4 Way TPN DB Double Door): Company made Metal Door type with IP-43 Degree of Protection. Incoming: 1 No. 40 Amp. 4P RCCB 100 MA. Outgoing: 12 Nos. 6-10 Amp SP MCB.

AC Distribution Board :Each Unit (4 Way TPN DB Double Door): Company made Metal Door type with IP-43 Degree of Protection. Incoming: 1 No. 80 Amp. 4P MCB 16 KA. Outgoing: 6 Nos. 20 Amp DP MCB 10KA.

Construction of 3 phase 11kv line though 95sqmm XLPE UG Cable (approximate to 100 mtr) as directed by EIC.

Construction of 250 KVA 11/0.4 KVA transformer with all required materials as directed by EIC.

FITTINGS & FIXTURES:

Supply, delivery, installation and testing of following types of LED Tube Fixtures Directly on Wall / Ceiling of Building with all accessories such as Electronics Ballast, Lamps, Stove Enameled Box, Perplex Sheet Cover etc. complete assembly and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge.MAKE: CG/ PHILIPS/ JAQUAR/BAJAJ

36/18 watt LED of approved make (Jaguar/Philips)

Ground Floor

First Floor

30 watt Track Light

Ground Floor

25W IP 65 RATED ,SUITABLE FOR OUTDOOR APLICATION WITH DIFFERENT COLIOURS AND WATTAGE STANDARD 5 .0 MTR ROLL STRIP LIGHT MAKE: CROMPTON CAT NO LSTP04X005XC / EQUIVALENT

24W ROUND LED 6500 CCT (K)DOWN light fixtures similar to JAQUAR cat no-LARV01R024XC or Equivalent.

3W Round recess mounted swivel spot light with beam angle 30 degree LED down light 6000 cct (k) fixtures similar to Crompton Cat No-LGSR-07-W or Equivalent.

LED Strip light complete set MAKE: philips/crompton

Supply, delivery, installation & testing of following Sweep & Speed Exhaust Fan on Existing Sheet Metal Switch Board including loop connections and making good the damages caused complete as required and as per direction of Engineer-in-charge.

225 mm Sweep 900 RPM.

400 mm Sweep Wall Fan.

Supply, delivery, installation and testing of following Sweeps of High Speed Energy DECORATIVE Efficient A.C. Ceiling Fan complete with Fan Blades, Down Rod, Canopies & Capacitor etc. including supply of Sundry Materials, making connection from the suitable point outlet but excluding cost of Fan Regulator complete as required and as per the Direction of Engineer-In-Charge. MAKE V GUARD /HAVELLS /ORIENT

1200 mm Sweep Ceiling Fan.

Supply, delivery, installation & testing of Electronic type Stepped Fan Regulator fixed on Existing Sheet Metal Switch Board including interconnections and making good the damages caused complete as required and as per Direction of Engineer-In-Charge.

PANEL BOARD:

Supplying, Installing, Testing and Energizing MS Cubical type Panel Board made of 2 mm thick CRCA Sheet with Hinged Door duly Fabricated with required MS Angle and Channels of adequate size, duly treated and Powder Coated (shall have Hinged Door at the Front and Detachable Plates at Back if requirement and at Top / Bottom for Cable / Wire Entry / Exit as per the Direction of Engineer-In-Charge and approved GA Drawing with following provisions.

Main Panel Board: Incoming: 630 Amp. 4P MCCB 25 KA (L&T DN250D) (Thermal Magnetic Release) 1 No. Equiments: 4 Nos. 400 Amp. Copper Bus Bar coated with PVC Heat Shrunk Sleeve (Colour Code). 4 Nos. 200 Amp. Copper Bus Bar coated with PVC Heat Shrunk Sleeve (Colour Code). 2 No. VAF Digital Meter. 9 Nos. RYB LED Indicator. 3 Nos. 400 / 5 Amp. C.T. Operated. 3 Nos. 150 / 5 Amp. C.T. Operated. 1Nos 150A 4P C.O. Switch. Outgoing: 2 Nos. 160 Amp. 4P MCCB 16KA. 5 Nos. 40 Amp. 4P MCB 10KA. 6 Nos. 63 Amp. 4P MCB 10KA. 6 Nos. 80Amp. 4P MCB 16 KA.

Pump Panel: Incoming: 63 Amp. 4P MCI- 1 No., RYB LED Indicator- 3 Nos., 80 Amp. Electrolytic Copper Bus Bar - 4 Nos. Outgoing: 32 Amp. 4P MCB 10 KA - 2 Nos. 32 Amp. DP MCB - 3 Nos.

Lift Panel: Incoming: 63 Amp. 4P MCI- 1 No., RYB LED Indicator- 3 Nos., 80 Amp. Electrolytic Copper Bus Bar - 4 Nos. 63 Amp. 4P RCCB 300MA - 1 Nos. 6 Amp. SP MCB 10KA - 6 Nos.

terrace Panel: Incoming: 160Amp. 4P MCCB 25 KA - 1 No., RYB LED Indicator- 3 Nos., 200 Amp. Electrolytic Copper Bus Bar - 4 Nos. Outgoing: 63 Amp. 4P MCCB 16 KA - 3 Nos.

Lightning Protection System.

Supply, Delivery, Installation, testing & commissioning of Advanceed Early Steamer Emrission (ESE) Lightning Protection Airterminal Coupling with NFC-17-102 Standard MODEL OPR -60 (RP-45 mtrs.) self standing 3 mtrs mast 60mm Dia,,with base plat & all fixing accesories including Air terminal Lighting Strike Counter Maintenance free Earthing - 2 Nos., 25 X 3 mm GI Flat 70 meters, Insulator, Saddles,Screws & Sleeves 180 set, 70 SQ MM SINGLE CORE MULTISTRAND COPPER CABLE PVC Insulated with all accesories.etc make: ABB

Providing & fixing of "55" Sony Bravia 55X7002E 55 Inch Ultra HD 4 Smart LED TV ANDROID VERSION DIEMENSION 1238 mm x 775 mm x 252 mm complete in all respect with Setup Box and all accessories as per the detail drawing and the direction of the architect .Make-SONY/SAMSUNG

AIR CONDITIONING SYSTEM

Supply of Modular type VRV ,Top Dischage , Cooling Only outdoor units equipped with highly energy efficient Scroll Compressors with all inverter compressor(s) with variable refrigerant temperature (VRT SMART) and VAV technology, tensile strength of compressor body not less than 600 MPa having compressor motor of 6 pole , each outdoor unit have external static pressure not less than 78 Pa, special designed four faces heat exchanger, ODU dB level less than 65 at a distance 1 Meter, centrifugal fan for condenser, ODU having front suction & top discharge, Y-branch as required, outdoor unit support, auto check function for connection error, auto address setting, refrigerant cooled PCB circuit at ODU and capacity as mentioned below. VRV System shall be suitable for working on 49 °C ambient temperature, Refrigerant R 410A. with Powder coated MS Angle / Channel outdoor stand of suitable size to carry the weight of outdoor unit. The unit price shall be inclusive of full charge of Refrigerant Gas & Oil, Freight, Insurance, all Taxes & Duties etc. as applicable In INR.

Nominal Capacity - 16 HP (Cooling Only , Top Discharge )/ all Inverter Scroll Compressor / OEM must be compressor manufacturer which is fitted in outdoor unit / Control Capacity - 10 ~100% / No of Compressor - 2 / External Static Pressure - 78 Pa/ Automatic Refrigerant Charge Function in VRV Outdoor unit/ Cooling Operation Range - 10~49 degC.

Nominal Capacity - 16 HP (Cooling Only , Top Discharge ) / all Inverter Scroll Compressor / OEM must be compressor manufacturer which is fitted in outdoor unit / Control Capacity - 10~100% / No of Compressor - 2 / External Static Pressure - 78 Pa/ Automatic Refrigerant Charge Function in VRV Outdoor unit/ Cooling Operation Range - 10~49 degC.

VRV Round Flow Cassette (360 deg Flow) Unit with VAV technology - 2.65 TR / CFM - 794 / Cooling Capacity - 30,700 / Sound level - 37 dB(A)- Navigation Remote + Panel [950(W) X 950(D) X 50(H)] + Refnet + Drain Pump

Supply of interconnecting Copper Refrigerant pipe work with (19 mm/ 13 mm thick) nitrile rubber tubular insulation between each set of indoor & outdoor units as per

Gas line :

Liquid line :

Condensate Drain Pipe :

Supply of PVC drain pipes with 9 mm thick nitrile rubber insulation of the following size ( with L bow, Socket & Reducers)

Ducting Work :

Installation, Testing & Commissioning of GI Ducting with GI Sheet Complete with all materials (Fabrication and Errection) in terrace to cover the expose pipe.

Installation, Testing & Commissioning of GI Slotted Cable Tray for expose copper piping covered with GI sheet (24G) on terrace & in shaft if open.

50mm X 300mm X 50mm

50mm X 200mm X 50mm

50mm X 150mm X 50mm

Testing & Commissioning of Refrigerant R410A gas

CCTV SURVEILLANCE SYSTEM

16 Channel Real Time Standalone DVR with D1 Resolution on all 16 Channels @400tps, HDMI Port, lH264 Hardware Compression, with 16 video inputs, capacity for installing 2 SATA Hard disks, back up through Disk array and USB Network support with static and dynamic IP. Real time viewing make Crystal.

HV Camera DM 2 MP 3.6MM PIR

Secure power supply 10amp SMPS

BNC wired Connector

DC wired Connector

2 TB HDD (S)

HDMI Cable (20mtr)

RG59JFX1+3X0.15 SQMM CCTV Cable (50 Mtr) COIL/DRUM

PVC TAPE

Samsung LED Monitor 44”

System installation, testing and commissioning charges

MUSIC SYSTEM

Odinix High Quality 6 watts 103mm dia Ceiling speakers

Ahuja 160 watts Amplifier with Remote and USB Port

Volume Control 6 watt

General Purpose Microphone, dynamic cardioid, frequency response 50- 15 KHz., sensitivity 1.5 m V/ Pa. Similar to PG57 Make : SHURE

System installation, testing and commissioning charges

LIFT PASSANGER ELEVATOR

Supply, installation, testing and commissioning of OTIS / KONE/ THYSSENKRUPP / MITSUBISHI make electric traction lift (8 nos passenger) as per following specifications. The lift should comply with ISI specifications with latest technology equipped with following details.

Installation of new lift includes all required civil works such as two coat of acrylic distemper (as per PWD detailed specifications after proper cleaning of existing surface) of lift well, hoist way , cleaning of pit and repairing of pit floors and other to accommodate the new equipment, repairing of walls if required and making it suitable to accommodate Stainless steel doors at all floors, fixing of bracket, scaffolding, minor building works etc. With cost of materials, labour, T&P, taxes etc. for proper completion of work as per various regulations of Fire department and statutes and as per direction of authorized representative of Architect incharge.

Note:- The work will have comprehensive defect liability period of two years from the date of handing over of lift. For the performance of the same, shall retain an amount equivalent 10% of quoted cost in the form of cash/bank guarantee in the format as security deposit towards performance during Defect Liability Period.

(q) Motor: This will be of siemens or Original equipment manufacturer make VVVF motor of suitable capacity must have class “F” insulation.(r) Face plate finish and shape-stainless steel matching and rectangular shape (s) The lift will be having following necessary features complete in all respect in addition to other constant features provided by manufacturer. i) Overload warning indicator. ii) Over current protection. iii) Phase reversal with automatic phase correction. iv) Handrails on rear side in car enclosure. v) Auto cut for fan. vi) Intercom with wiring up to required place connection to EPABX. vii) Automatic Rescue Device. s) Finish: -Stainless Steel finish with Antistatic flooring As per the choice of Architect .

POWER SUPPLY TO PASSENGER LIFT

Wiring to light & 5 A plug points with 1.5sqmm PVC insulated 1100 volt grade multistranded copper conductor wire for phase, neutral & earth continuity conductor and loop earth to fitting & fixture run inside 2mm thick PVC conduit pipe recessed in wall/ column/ ceiling of the building including supply of materials such as flush type switches, sheet metal switch board with bakelite cover, wire, ceiling rose, angle / batten holder, junction box etc complete with making good the damages caused as required and as per direction of Engineer-in-charge.

Light Point

6A Plug on Separate Board

Supply, delivery, installation & testing of outlet boards of following configuration with all accessories fixed on metallic concealed box including interconnections and making good the damages caused complete as required and as per direction of Engineer-in-charge.

1 no. 5/15A P/S

Wiring for Circuits with following number and sizes of PVC insulated 1100 volt grade multistranded copper conductor wire run inside 2mm thick PVC conduit pipe recessed in ceiling / column / walls of building including supply of all materials such as wires, PVC conduit, junction box and pull box etc. with making good the damages caused complete as required and as per direction of EIC.

2 nos. Single core 2.5 sqmm copper wire for phase and neutral and 1 no. Single core 1.5 sqmm copper wire for earth continuity conductor for LIFT pit light and power points.

Supply and Fixing of Bulk Head Fitting similar to Philips CAT No:NXC11 with 60 watt GLS Lamp.

Supply and Installation of T-5 28W Tube Light Fitting with Lamp similar to PAC Cat. No. AB 128 HF.

Supply of all Materials and Fixing / Laying of following size G.I. Flats for earth connection complete as required and as per the direction of EIC.

Supply of all Materials and Fixing of G.I. Earth Busbar of size 300mm x 25 x 5mm suitable for G.I. Flat earth connection complete as required and as per the direction of EIC.

Laying of 3.5 c x 25sqmm PVC Aluminium Armoured Cable on Cable Tray fixed on Wall with Clamping from Electrical Panel Room to Lift DB complete as required and as per the direction of EIC.

Termination of 3.5 c x 25sqmm PVC Aluminium Armoured Cable with Cable Gland and Socket complete as required and as per the direction of EIC.

Distribution Boards : Supply, Installation, Testing and Commissioning of L.T. Indoor Wall mounted type Distribution Boards to be fabricated with 1.6 mm thick CR sheet metal cubicle, duly acid treated for derusting, primered and painted with 2 coats of enamel paint of approved shade; dust, damp and vermin proof; having hinged door and provision for cable/conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS complete as required and as per the direction of EIC.

MDB Lift : Incommer : i) 01 no. 63A 4P MCI Busbar : 4 nos. 100 Al. Bus duly Sleeved. (Size - 25 x 5mm) Outgoing : i) 01 no. 40A 4P RCCB ,(300mA) ii) 01 no. 25A 4P RCCB ,(300mA) iii) 06 nos. 10 SP MCB,'C' Instruments : i) 03 nos. Phase Indicating Lamps with C.F. ii) 01 Sets of (0-500V) Digital Voltmeter (Duly Factory Wired)

FIRE HYDRANT

PUMPS AND APPURTENANCES

Supply , installation, testing & commissioning of Motor driven Backpullout type Centrifugal pump delivering 1620 LPM at 56 MWC head with CI casing bronze impeller and SS shaft for Hydrant & Wet riser system with 2 pole 45 HP TEFC motor suitable for operated on 415 V ,3 ph, 50 c/s AC supply as per TAC along with suitable size Aluminium XLPE Armoured Power Cabling, all other accessories as and cement concrete foundation as per direction of Engineer-in-charge.MAKE: WILO

Supply , installation, testing & commissioning of Diesel Engine driven Backpullout type Centrifugal pump having 1620 LPM at 56 MWC head with CI casing bronze impeller and SS shaft and suitable diesel engine along with all accessories and fuel storage tank cement concrete foundation as per direction of Engineer-in-charge.MAKE: WILO

Supply , installation, testing & commissioning of Motor driven Backpullout type Centrifugal Jocky pump delivering 180 LPM and 56 MWC head with CI casing bronze impeller and SS shaft and 2 pole 10 HP TEFC electric motor suitable for operated on 415 V ,3 ph, 50 c/s AC supply along with suitable size Aluminium XLPE Armoured Power Cabling, all other accessories and cement concrete foundation as per direction of Engineer-in-charge.MAKE: WILO

Supplying, installation, testing and commissioning of Electric Motor Driven Pressurization Terrace Pump having discharge of 450 LPM at 35 MWC head complete with Pump Set, Electric Motor suitable for operation on 415 V ,3 ph, 50 c/s AC supply , Base Frame , 2 no. pressure switch, 1 no. pressure gauges, 2 nos. Butterfly valves, 1 no. NRV . PCC foundation and foundation bolts as required size Aluminium XLPE Armoured Power Cabling from pump panel to pump as required. MAKE: WILO

PANEL AS ABOVE

One (1) - Set of Auxilliary relay for automatic operation through pressure switch.

PIPE & VALVES ETC.

Supply,Installation,Testing & Commissioning of 'C' Class heavy duty MS pipe (as per IS 1239 upto 150 mm NB and IS 3589 for above 150 mm 6mm thick) with flanges and fitting such as bends, tees, reducers, rubber insertions and galvanized nuts and bolts of following size on surface along wall / shaft with MS bracket, suspended from ceiling/ beam with suspenders duly painted with two coats of primer and finished with enamel paint of approved colour laid through pipe or in trench after wrapping with hassen cloth after applying coal tar primer as required as per direction of Engineer-in- charge.MAKE: JINDAL

Providing, fitting & fixing of following size cast iron double flanged slim seal wafer type Butterfly valves with EPDM rubber lined with lever operated as per IS-13095 with ISI mark of pressure ratting PN-1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of E.I.C.MAKE : KILOSKAR

Supply,Installation,Testing & Commissioning of following size CI Isolation Valve (Gate Valve) as per IS I4846, Rising type with position indicator and locking arrangement if required as per direction of Engineer-in-charge.

Providing, fitting & fixing of following size cast iron double flanged type Non return Valve as per IS- 5312 (Part 1): 2004 with ISI mark of pressure ratting PN-1.60 including fixing the same with supply of required jointing materials like flanges, rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of Engineer-in-charge. MAKE: DSR

Supply,Installation,Testing & Commissioning of Pressure gauge of 0-16 Kgf/sq.cm. range with cut-off bronze ball valves below of suitable size with all accessories as per direction of Engineer-in-charge.MAKE : DSR

Supply,Installation,Testing & Commissioning of Pressure Switch with cut-off bronze ball valves with integral strainer & flare nut (mixed ends) of suitable size with all accessories as per direction of Engineer-in-charge.

Supply,Installation,Testing & Commissioning of 1 cum Air vessel (comprise with 100 NB C.I. Sluice vale and 25 NB Air release vale and ball valve) with matching flanges as per direction of Engineer-in-charge.

Supply,Installation,Testing & Commissioning of 150 NB C.I. PRV with matching flanges as per direction of Engineer-in-charge.

WET RISER CUM DOWN COMER SYSTEM

Supply,Installation,Testing & Commissioning of Stainless steel Hydrant Valve / Landing valve, of 63 mm NB size, type-A, single headed , oblique type, as per IS :5290/93 and as per direction of Engineer-in-charge.MAKE: PADMINI

Supply,Installation,Testing & Commissioning of SS short branch pipe with 63 mm male inlet and 19 mm outlet nozzle, as per IS:903 and as per direction of Engineer-in-charge.

Supply,Installation,Testing & Commissioning of 63 mm NB and 15meter long RRL Fire Hose fitted with intstantaneous male & female SS coupling, complete by GI wire binding for Internal Hydrant as per direction of Engineer-in-charge.MAKE: SUPERMEX

Providing supply & fixing of MS Hose Box for of suitable size(750X600X250mm) to accomodate 2 nos. of 15/ 1 no of 30 mtr long fire hose and a branch pipe, wall mounted type as per direction of Engineer-in-charge.MAKE: SUPERMEX

Supply,Installation,Testing & Commissioning of Swinging pattern wall fixing first aid hose reel made from MS sheet and waterways and moving parts with rubber hose of 20 mm dia. and 30 mtrs. long with ABS(Plastic) shut-off nozzle as per IS: 444/IS: 12585 Type-I., complete with all accessories as per direction of Engineer-in-charge..MAKE: PADMINI

Providing, fitting and fixing of C.I. 25 MM single air relief valve with stop cock confirming to IS:14845/2000 with ISI mark for water works purpose including fixing the same with hydrant riser including testing & commissioning the system etc. all complete as per approved specification & direction of Engineer-in-charge.

Providing, fitting & fixing of 4-Way GM fire brigade connection consisting of 63 mm dia instantaneous type male couplings with built-in check valves, 150mm dia flanged outlet complete with bolts, nuts and rubber insertions confirming to IS:904 with ISI mark including testing & commissioning the system etc. all complete as per apporoved specification & direction of EIC.

EXTERNAL HYDRANT SYSTEM

Supplying, installing, testing and commissioning of M.S Pipes confirming to IS 1239 Pt- Iheavy grade with panting, suitable type of supports (Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), anchor fasteners, bolts nuts, clamps, "U" bolt, malleable specials such as Reducers, Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, as per drawings. The quoted rate shall also include for chasing / chipping walls, making bore holes in walls / floor and making them good with filler material and finished in cement morter etc. complete.

150mm dia External Hydrant

100 mm dia (Terrace Ring Main)

80 mm dia (Hydrant Post)

Supplying, Installing, testing and commissioning Isi Mark CI butterfly valves (PN 16) slim seal standared level operated type with required flanges, nuts, bolts etc. complete.

150 mm nominal dia (For Ring Main and 4 say)

Single headed hydrant valve as per IS 5290, made of S.S with 63 mm dia instantaneous outlet of 80 mm dia fanged inlet, Blank caps, chain and hand wheels etc complete.

2 lengths of 15 M long, 63 mm dia RRL hose with instataneous couplings and Hoses shall be stored in side the hose cabinet.

1 no S.S short branch pipe with nozzle.

M.S. Hose Cabinet fabricated out of M.S sheet of 16 swg. With glass fronted (4mm thick glass with rubber beeding) and size of the Cabinet shall be 600 mm (L)x450mm(H)x250mm(Width). Quoted rate shall be includes Hinges, all fastners etc, and Door shall be powder coated of approved colour both inside and out side.

Coating and wrapping of underground pipelines as per IS 10221 : 2008 per running metre.

PCC Pedestal

300 MM Hume Pipes as per IS Standard

Earth Digging and Reffilling and making good the same for underground laying of Hydrant Pipe as per IS standard

Supplying, installing and commissioning of fire brigade inlet inlet connection of 4 way with 4 nos. 63 mm dia. Built-in Gun metal Non-return valves instantaneousl coupling type arranged on 150 mm dia . Pipe manifold and connected to wet riser main.

SIGNAGES

Providing and installing in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyle painted foam board completed with mirror fasteners.

Floor indentification signage (ie, GROUND FLOOR..... Etc) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5 cm with contrasting colour from back ground. Size shall be 15 cm x 60cm.

Providing and fixing the signages "Fire Exit, Fire Exit Arrow Down, Fire Exit Arrow Left, Fire Exit Arrow Right" of 1.5in height letters in white with green back ground. The size of the board shall be 25chm x 15cm and shall be fixed at the height of 2 mts

Providing and fixing the signages "In case of fire pull down - with Manual call point symbol. Size 6"x8"

Providing and fixing the signages "Main fire alaram panel." size 6"x8"

Providing and fixing the signages "In case of fire, Do not use Lift, Use Stair - with symbol. "Size 8"x8"

Providing and fixing the signages "Assembly point- with symbol (A2 Size)" - Size 17" x22"

Illumnation Glow light for Exit indication with Battery Back-up.

FIRE ALARAM AND DETECTION SYSTEM

EXTINGUISHER SYSTEM

"SUPREMEX" Brand ABC Dry Powder Fire Extinguisher 4 Kg apacity mfd to IS: 15683 with BIS mark, Brass forged squeeze lever discharge valve CE-EN3 MARKED, fitted with pressure indicating guage (CE MARK - EN3 APPROVED) , discharge hose with nozzle, duly charged with ISI Marked 90 % MONO AMONIUM PHOSPHATE (MAP) SILICONISED powder, pressurized with Nitrogen Gas,wall mounting bracket & screw. FIRE RATING - 2A, 21B WARRANTY 5 YEAR as per direction of Engineer-in-charge. make: supermex

"SUPREMEX" Brand ABC Dry Powder Fire Extinguisher 6 Kg apacity mfd to IS: 15683 with BIS mark, Brass forged squeeze lever discharge valve CE-EN3 MARKED, fitted with pressure indicating guage (CE MARK - EN3 APPROVED) , discharge hose with nozzle, duly charged with ISI Marked 90 % MONO AMONIUM PHOSPHATE (MAP) SILICONISED powder, pressurized with Nitrogen Gas,wall mounting bracket & screw. FIRE RATING - 2A, 21B WARRANTY 5 YEAR as per direction of Engineer-in-charge. make: supermex

"SUPREMEX" Brand CO2 Fire Extinguisher 4.5 Kg apacity mfd to IS: 15683 with BIS mark, Brass forged squeeze lever discharge valve CE-EN3 MARKED, fitted with pressure indicating guage ,Cylinder shall be IS marked to IS : 7285and PESO approved complete with all accessories, wall mounting bracket & screw. FIRE RATING - 34B WARRANTY 1 YEAR as per direction of Engineer-in-charge. make: supermex

Supply installation testing and commissioning of Clean Agent 2 lts capacity Fire Extinguisher with initial charge complete with wall fixing barcket.The extinguisher shall conform to IS 940 and have certification mark engraved.

AUTOMATIC FIRE ALARMING AND DETECTION SYSTEM

S/I/T/C of Vds approved 32 bit microprocessor based Intelligent Addressable Fire Alarm Control panel with 2 loop with battery back up to 72 hours, expandable upto min. 14 loops w/o changing the cabinet. The control panel, batteries, battery charger etc, shall be Vds approved and as per EN-54 standard. The panel should be modular, decentralized, with 100% hot redundancy in cpu/master control unit, 100% hot redundancy in loop cards, relay and interface card by means of duplicated electronics means hardware redundancy with full functionality. The panel shall consisting with minimum 240 character LCD display. Panel should be able to record atleast 65000 events history. Each loop should be capable to have atleast 250 elements / devices out of which min. 200 nos. shall be detectors as per direction of Engineer-in-charge.make:SCHRACK

Supply, Installation, Testing & Commissioning of Intelligent Addressable type multisensor detector with base, with 8 bit Microprocessor inbuilt, for use as heat (Fixed + Rate of Rise or individual ) or smoke or combined both with automatic electronic addressing, microprocessor type and must have integrated short circuit isolator (in case short circuit isolator is not inbuilt, the price of this item shall be inclusive of an independent short-circuit isolator along with each detector). The detector shall have IP 44 protection catagory & ambient temperature -20⁰C to + 60⁰C, the base shal have no electronics only dry contact terminals. The quoted item shall completely comply to the technical specification.Shall be Vds approved according to EN 54-5, 54-7, 54-17, 54-29 as per direction of Engineer-in-charge.make:SCHRACK

Supplying installation testing and commissioning of Addressable Manual Pull Station, complete with addressable mini input module, back box and accessories & shall be VDS Approved, as per direction of Engineer-in-charge. make:SCHRACK

Supplying installation testing and commissioning of Audio Visual Strobe, complete with mounting box and accessories and module if require as per direction of Engineer-incharge.make:SCHRACK

Supplying installation testing and commissioning of a pair of 1.5 sq.mm single core flexible copper cable (2X1.5sq mm) to be laid within Existing MS conduit of suitable size to be erected above the wall or concealed, as the case may be, with all accessories & shall be VDS Approved, as per direction of Engineer-in-charge.make: polycab

Supply, delivery and laying of following sizes of PVC Conduit in surface/ in recess alongwith other accessories and 18 swg GI wire complete for Fire Alarm wiring including painting as required and as per direction of Engineer-in-charge.MAKE: AKG

20mm dia

25mm dia

AUTOMATIC FIRE DETECTION

Supply,installation, testing & commissioning of 4KG capacity FK-5-1-12/ Novec 1230 (UL LISTED) , DLP Assembly with automatic valve, push in connector for tube, FK-5-1-12/ Novec 1230 (UL LISTED) gas , mounting bracket, End of Line adopter and low pressure switch for monitoring system activation.

Linear pneumatic heat Detection Tube with all necessary fittings & supports.( UL LISTED)

Master Control Unit with Audio Visual Alarm With Wiring to Make Complete System Operational. The Control Panel Should have Provision for integration with Fire Alarm System.

Supplying,installation,testing and commissioning of Microprocessor based intelligent and electronically addressable fire alarm panel single Loop expandable to 2 Loops,Maximum 477 adreeable devices,30 Zone,2Bell circuit.The panel shall have 240 volts AC power supply,automatic battery charger,24 voilts,sealed lead acid maintenance free batteries with battery back up for 8 hours normal operation and 15 mminutes alarm operation,Panel shall be provided with all accessories and equipment.

Supply,installtion,testing & commissioning of dual loop card along with termination of the control/signal cables with all the required components and accessories to complete the item.

Supply,installation,testing & commissioning of short circuit isolator with the required components and accessories to complete the item.

Supply,installation,testing & commissioning of repeater panels along with termination of all the control/signal cables with all the required components and accessories to complete the item.

Supply,installation,testing & commissioning of intelligent combined optical smoke,fixed temperature and Rate of Rise Heat Detector,Dirift Compensation,Sensitivity Adjustment,8 Bit Processor (LPCB,CE & UL Approved)

Supply,installation,testing & commissioning of remote response indicator,dual LED for 360 viewing angle,white colour,LPCB,CE & UL approved.

Supply,installation,testing & commissioning of Common Detector Base for Addressable & Conventional Detectors (Certificated LPCB)

Supply ,installation,testing & commissioning of 4x4 GI Box

Supply ,installation,testing & commissioning of Semi Flush Mounting Re-settable (Non-Breaking Glass). Supplied with special Reset Tool-Compatible with both I & DI Series (Certified by LPCB)

Supply ,installation,testing & commissioning of Anti Tamper Security Cover

Supply ,installation,testing & commissioning of Addressable loop powered sandwitch type combined sounder and strobe certificated by LPCB

Supply ,installation,testing & commissioning of Single input/Output Module (Certificated by LPCB)-Loop

Supply ,installation,testing & commissioning of 8 Zone master Fire telephone panel with all the required components and accessories to complete the item.

Supply ,installation,testing & commissioning of Fire fighters telephone socket with all the required components and accessories to complete the item.

Supply ,installation,testing & commissioning of Beam detector with all the required components and accessories to complete the item.

Supply ,installation,testing & commissioning of Duct probe detector with all the required components and accessories to complete the item.

Supply ,installation,testing & commissioning of Duct probe detector with all the required components and accessories to complete the item.

Supply ,installation,testing & commissioning of UV Flame Detector with all the required components and accessories to complete the item.

Supply ,installation,testing & commissioning of 2 Core 1.5 sq mm rigid copper cable in MS Conduit.

Supply ,installation,testing & commissioning of 2 Core 1.5sq mm Armoured copper cable in surface by saddling using GI metal saddles.

EMERGENCY EXIT LIGHTING

12 watts Wall Mount/Ceiling Recessed LED

Supplying,laying,termination of 2 Core 1.5 sq mm power cable in MS conduit per running metre of cable used

Supplying,laying,testing and commissioing of contractor in DIN mount electrical panel of suitable size to switch on power to led lights automatically during power failure.

Supplying,testing and commissioing of 2 KVA Invertor with 120 minutes backup.

EMERGENCY FIRE PANEL

Supply,installation,testing and commissioning of Emergency Fire Panel (EFP) in powder coated MS Sheet,with PFC to switch the panel from Normal Model to emergency mode during emergency and provision to control thr following circuits with HRF.The panel has to be charged before incoming LT power to MV panel with option to manual switch to normal and emergency mode in case of auto mode fails during emergency.With Visual indicators to alert maintenace staff for power status.

Circuit to disconnect Power to MV Panel

Circuit to disconnect Power from DG to MV Panel

Circuit to power the following circuits on with HRP Circuit Breakers during Emergency Modes.

Atrium Exhast Fan

Emergency Exit Lighting

Jet Fan

Lift Pressurisation Fan

Staircase Pressurisation Fan

Smoke Exhust Fan

Spare

Circuit to power the following circuits with HRP Circuit breakers during Normal and Emergency Modes

Domestic Overhead tank Pump

Domestic Submersible Pump

Domestic Water Automation System

ELV Control Room-Fire Alarm system,CCTV,PA,Voice Evacuation system

Fire Control Room

Fire Pump Room including pumps

Fire Tank Pump-Overhead

Fire Tank Pump-Underground

Spare

PANEL BOARD:

Supplying, Installing, Testing and Energizing MS Cubical type Panel Board made of 2 mm thick CRCA Sheet with Hinged Door duly Fabricated with required MS Angle and Channels of adequate size, duly treated and Powder Coated (shall have Hinged Door at the Front and Detachable Plates at Back if requirement and at Top / Bottom for Cable / Wire Entry / Exit as per the Direction of Engineer-In-Charge and approved GA Drawing with following provisions.

INTERNAL HYDRANT SYSTEM

Supplying,installing,testing and commissioning of MS pipes confirming to IS1239 pt-I Medium grade with painting,suitable type of supports (Shall be fabricated by MS Channel/Angle/Flat for above 50mm dia,anchor fasteners,bolts nuts,clamps,U bolte,malleable specials such as Reducers,Tees,elbws,flanges including cutting,welding,fixing in / on walls,ceiling by using suitable supports etc,as per drawings.The quoted rate shall also include for chasing/ chipping walls,making bore holes in walls/floor and making them good with filler material and finished in cement morter etc.

100 mm nominal dia

80 mm nominal dia

Supplying,installing,testing and commissioning ISI Mark CI butterfly valves slim seal standared lever operated type with requied flagers,nuts,bolts etc.

100 mm nominal dia

Single headed hydrant valve as per IS 5290 made of SS with 63 mm dia instantaneous outlet of 80 mm dia fanged inlet,Blank caps chain and hand wheels etc complete.

2 lengths of 15M long,63mm dia RRL hose with instataneous couplings and Hoses shall be stored in side the hose cabinet.

S S short branch pipe with nozzle

Hose reel drum of swinging type with 19mm dia Rubber braided hose of 30M length with Gate valve and shut off nozzle complete.

MS Hose Cabinet fabricated out of MS sheet of 16 swg with glass fronted and size of the cabinet shall be 600 mm (450x250) Quoted rate shall be includes hinges,all fasteners etc,and door shall be powder coated of approved colour both inside and out side.

Supplying and installation fire Air vessel of 150mm dia and 1m high fabricated from 6-8 mm thick MS plate suitable for 10kg/sqcm.working pressure with accessories,painted with two coats of postal red enamel outside over a coat of primer.

Supplying and installation testing and commissioning of Gun metal/Brass forged chrome finished ball valves with fittings of screwed and type. (25mm dia for hose reel)

STAIRCASE AND LIFE PRESSURISATION

Suuply,erection,testing and commissioning of ceiling hunged tube Axial flow fans with adjustable pitch blade,MS casing,cast aluminium alloy impeller complete with TEFC Sq.cage induction motor suitable for 415 volts+10%,50HZ +3%,4 pole,three phase AC supply of class F insulation with support,mountings with vibration with support,mounting with vibration isoltor spring and fire rated canvas flexible connection etc.& of following capacity as per approved shop drawings.

Starter panel for Fans..The starter should be capable to run automatically in case of fire.Operation of the fan will only in case of fire.

For staircase Pressurisation :

Lift Well

PUBLIC ANNOUNCEMENT SYSTEM

Supply, Installation, testing, commissioning of 8 zone, Voice Alaram controller with built in USB, MP3, AM/FM player (with 8 zone paging station) Local Control Panel is 8 speaker circuit digital voice alaram controller which includes a digital signal processor, audio storage for pre-recorded messages, audio matrix, and control, fire alaram input, loudspeaker output connection terminals and audion source connection ports for auziliary inputs. Provides 8 boradcast zone output function the peak power of each zone is 400W, and the total power of the all 8 zones is 1000W

Supply, Installation, testing, commissioning of 480 W Power Amplifier with following features : Rated output wattage 480 W, Amplifier output 100V, 70V and 4-16 Ohms transformer isolated speaker outputs, Supply input 0.775 v (0dB) unbalanced, 10k ohms, XLR and phone jack.

Supply, Installation, testing, commissioning of 10 W Wall Speaker with max SPL 1M/1W 96dB. Frequency response of 80Hz-20 KHz with a dispersion angle of 160 deg. The speaker should have tappings at 5W/1.5W

DVD Plaer with USB Port along with interconnecting cables & 16 GB Pen Drive

Supply, Installation, testing, commissioning of Speaker cable in MS Conduit per running metre of cable used.

Supply, Installation, testing, commissioning of Speaker cable in rigid PVC pipe / Casing caping per running metre of cable used.

FIRE PUMP Maintenance Module + WEB ALERT

GSM based Controller

Postpaid SIM montly rentals

Web based user License fee per user

SMS pack per year

Automatic Pump Daily Maintenance Module

Sprinkler Solenoid Valve + Flow Switch

Diesel Pump Solenoid Valve + Flow Switch

Jockey Pump Solenoid Valve + Flow Switch

Hydrant Pump Solenoid Valve + Flow Switch

Water Level Switch for water level monitoring

Diesel Tank Fuel Level Indicator

System installation, testing and integration charges

SPRINKLER SYSTEM

Supply,Installation,Testing & Commissioning of Pendent / Upright type Standrd Sprinkler with QB of 68 /79 deg. C temperature rating and 1/2" end connection confirming to IS: 15105 with ISI mark for all floors etc. all complete as per direction of Engineer-in-charge.

Supply,Installation,Testing & Commissioning of 150NB Alarm Valve , C/w Sprinkler Water Motor Gong Retarded Chamber, Flange to:- ANSI B 16. 1 Class 125/ANSI B16.5 Class 100, All Components are UL Listed/FM Approved , Rated pressure 17.50 kg/cm2, Test pressure 500PSI confirming to IS :15105:2002 with ISI mark as per direction of Engineer-in-charge.

Providing, fitting & fixing of following size cast iron double flanged Y type strainer with SS 304 perforated screen confirming to IS 1538 with ISI mark of pressure rating PN-1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure & all complete as per specification & direction of E.I.C.

150mm dia

Providing, fitting & fixing of following size Bronze flanged type Globe Valve with hand wheel Confirming to IS -13114 : 1991 with ISI mark of pressure ratting PN-1.60 including fixing the same with supply of required jointing materials like flanges, rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure for all floors etc. all complete as per specification & direction of E.I.C.

Supply,Installation,Testing & Commissioning of C. I. Sight glass with 25 NB Gunmetal Globe Valve with CI hand wheel ISI Mark for all floors etc. all complete as per direction of Engineer-in-charge.

Providing, fitting and fixing of C.I. single Air relief valve with stop cock confirming to IS:14845/2000 with ISI mark for water works purpose including fixing the same with hydrant riser including testing & commissioning the system etc. all complete as per approved specification & direction of EIC.

Providing & fixing of Water Flow Switch 150 mm Diameter with all accessories for all floors etc. all complete as per direction of Engineer-in-charge.

Providing & fixing of 25 mm size Gunmetal Pressure Release Valve with isolation valve and all accessories conforming to IS3233:1965 as per direction of Engineer-in-charge.

Supplying, laying, testing and commissioning of approved make 2x 2.5 Sq.mm. FRLS PVC insulated Copper conductor, single core cable in existing surface/recessed conduit for annunciation panel of flow switch on the sprinkler line capable of sending impulses to the control room with accessories.

Providing, laying, testing & commissioning of Flexible Sprinkler Hose Corrugated Unbraided type of size 1000 mm for Fire Sprinklers, with 1'' Inlet Nipple BSPT,1/2" Outlet Reducer BSPT,0.7 m Square Supports Bar & Brackets(UL Listed) with all complete accessories as per direction of Engineer-in-charge.

Ms GOLDEN WOOD PECKER

RASHID SHAKEEL HASAN