Loading
Loading…
Loading…
Tender Value
₹78.6 L
EMD Value
₹1.6 L
Closing Date
13 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
SR.DEN/1
14 conditions · 3 needing a document upload
Item no 10.2 of GCC 2022: Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. As per Clause 10.2 of Indian Railways Standard General Conditions of Contract'2022 with upto date correction slip. [Authority: Executive Director/Civil Engineering(G), Railway Board's letter No.2022/CE-I/CT/GCC-2022/Policy dated 14.07.2022]
SIMILAR NATURE OF WORK FOR THIS CONTRACT- EXECUTION OF ANY CIVIL ENGINEERING WORKS
21 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Para 5(3) ii. Part I of GCC shall be read as under: The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids [i.e. excluding the last date of submission of bids] [Advance Correction Slip No.5 to Indian Railways Standard General Conditions of Contract, April 2022 vide Executive Director, Civil Engineering(G), Railway Board No.2022/CE-I/CT/GCC-2022/Policy dated 20.10.2023].
The participating Bidder must submit self certificate [Annexure V & VA as applicable] duly downloaded from the link given in Submission of Document Verification Certificate or documents uploaded along with tender. [Advance Correction Slip No.3 vide Executive Director, Civil Engineering(G), Railway Board No.2022/CE-I/CT/GCC-2022/Policy dated 26.04.2023 and Advance Correction Slip No.4 vide Executive Director, Civil Engineering(G), Railway Board No.2022/CE-I/CT/GCC-2022/Policy dated 07.08.2023 ].
Maintenance period of contract - The Earnest Money/Bid Security deposited by the contractor will be converted into Security Deposit and will be refunded after six months of the date of completion of the work in all respect to the entire satisfaction of the Railway and on receipt of a certificate from the Assistant Engineer concerned.
All documents in support of fulfillment of eligibility criteria with respect to completion of similar nature of work for Technical Eligibility Criteria and Total contract value for Financial Eligibility Criteria should be submitted/ uploaded online in the website with scanned copy at the time of tender bidding with details showing in Annexure I, IV. No post tender communication, in any form will be made or entertained, after opening of tenders, in this regard. Railways may however call for the originals of the credentials for verification or any clarifications/confirmations on the contents of the documents submitted. Eligibility of tenderers shall be decided solely of the basis of the documents submitted along with the tender offers and any subsequent document whatsoever submitted in this connection would not be given any cognizance for finalization of the tender.
Payment through Letter of Credit is applicable for this tender as per Railway Board's letter no 2017/ACII/9/10 Pt I dated 20.02.2018 & 2018/CE-I/CT/9 dt. 04.06.2018 (Annexure B & C attached).
INSTRUCTION TO BIDDERS: A] The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of his obligations or liabilities hereunder nor will it affect any rights of the railway there under. B] In case of any wrong information submitted by tenderer, the contract shall be terminated, Earnest Money Deposit [EMD], performance Guarantee [PG] and Security Deposit [SD] of contract forfeited and agency barred for doing business on entire Indian Railways for 5[five] years.
Shramik kalyan Contractor[s] are requested to get themselves registered on Railways Shramik kalian portal at www.shramikkalyan.indianrailways.gov.in after issuance of letter of acceptance.
Contractor(s)/ Bidders are requested to refer to Clause 46A of Indian Railways Standard General Conditions of Contract'2022 with up to date correction slip for Price Variation Clause (PVC) in works contract. Item no 46A.1 of GCC 2022: Price Variation Clause (PVC) shall be applicable only in tender having advertised value above Rs. 2 Crores. [Authority: Executive Director/Civil Engineering(G), Railway Board's letter No.2022/CE- I/CT/GCC-2022/Policy dated 14.07.2022]
For further details related to 'Bid Security' Bidders are requested to please connect para no 23 of the tender documents.
Bidders are requested to refer to para no 9 of tender document [Para 41 & 42 of Part II Standard General Conditions of Contract for "Variations in extent of Contract" of GCC 2022]
In case Agency desires submission of Bid Security in the form of Bank Guarantee, then please refer to para no 23(3) of Instruction to Tenderers for e-tenders, chapter I for further guidance. [Clause 5.0 of Part I of GCC 2022]
Bidders may also upload any relevant document as deemed fit.
At Sealdah : Renovation and repairing work of staffs section, store of Electrical, Signal and Telecommunication Department and Officer's chamber at DRM building ground floor and 1st floor including all other ancillary works under Sr. Section/Engineer [Works]/Sealdah.
TN-166-25-26~ER
TN-166-25-26
Open
Works - General
6 Months
Kolkata, West Bengal
₹0
₹1.6 L
13 Jan 2026
19 Dec 2025
30 Dec 2025
105 items across 2 schedules · ₹15,84,003 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in- charge. | cum | 80 | 411.3 | 32,904 |
| 2 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 10 | 7,365.15 | 73,651.5 |
| 3 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 5 | 9,673.5 | 48,367.5 |
| 4 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 800 | 89.65 | 71,720 |
| 5 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 10 | 6,658.25 | 66,582.5 |
| 6 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 10 | 8,288.35 | 82,883.5 |
| 7 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 30 | 1,018.05 | 30,541.5 |
| 8 | Decorative veneer facings approved manufacture | Sqm | 60 | 1,645.8 | 98,748 |
| 9 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 150 | 1,063.45 | 1,59,517.5 |
| 10 | Kiln seasoned and chemically treated hollock wood | cum | .8 | 74,199.7 | 59,359.76 |
| 11 | Kiln seasoned and chemically treated hollock wood | cum | .5 | 64,332.2 | 32,166.1 |
| 12 | 4 mm thick glass pane (weight not less than 10kg/sqm). | Sqm | 5 | 1,897.1 | 9,485.5 |
| 13 | 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). | Sqm | 25 | 2,231.2 | 55,780 |
| 14 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 36 | 1,881.95 | 67,750.2 |
| 15 | Providing and fixing teak wood lipping of size 25x3 mm in pelmet. | Metre | 80 | 61.5 | 4,920 |
| 16 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 1200 | 197.7 | 2,37,240 |
| 17 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). | Each | 60 | 194.35 | 11,661 |
| 18 | 300x16 mm | Each | 30 | 180.55 | 5,416.5 |
| 19 | 75x47x1.80 mm | Each | 55 | 64.2 | 3,531 |
| 20 | 100x10 mm | Each | 10 | 160.3 | 1,603 |
| 21 | 40 mm | Each | 20 | 264.9 | 5,298 |
| 22 | 100 mm | Each | 24 | 189.85 | 4,556.4 |
| 23 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | Each | 12 | 1,025.65 | 12,307.8 |
| 24 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | Each | 12 | 817.5 | 9,810 |
| 25 | 125 mm | Each | 24 | 60.05 | 1,441.2 |
| 26 | Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge. | Set | 48 | 355.05 | 17,042.4 |
| 27 | Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) | Each | 24 | 17.65 | 423.6 |
| 28 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | Metre | 75 | 702.6 | 52,695 |
| 29 | 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in- charge. | Sqm | 30 | 3,963.7 | 1,18,911 |
| 30 | 1.0 mm thick | Sqm | 750 | 764 | 5,73,000 |
| 31 | 12mm thick commercial ply conforming to IS : 1328 BWR type | Sqm | 750 | 1,084.6 | 8,13,450 |
| 32 | Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge. | Sqm | 180 | 2,339.6 | 4,21,128 |
| 33 | Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge. | Metre | 80 | 38.45 | 3,076 |
| 34 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm | 40 | 545 | 21,800 |
| 35 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 200 | 938.5 | 1,87,700 |
| 36 | Size of Tile 600x600 mm | Sqm | 600 | 1,416.65 | 8,49,990 |
| 37 | Providing and fixing glazed screen printed border tile 75mm wide having thickness 5mm, of approved quality & make, in all shades, design and prints, in dado, over 12mm thick bed of cement mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3 kg/sqm including pointing with white cement mixed with pigment of matching shade, all complete as approved by Engineer - in - Charge | Metre | 120 | 169.4 | 20,328 |
| 38 | 12 mm thick | Sqm | 480 | 888.2 | 4,26,336 |
| 39 | Stone ware spout | Each | 8 | 142.1 | 1,136.8 |
| 40 | 110 mm diameter | Metre | 60 | 319.75 | 19,185 |
| 41 | 110 mm | Each | 8 | 119.95 | 959.6 |
| 42 | 110 mm | Each | 8 | 110.6 | 884.8 |
| 43 | 110x110x110 mm | Each | 16 | 205.45 | 3,287.2 |
| 44 | 110x110x110 mm | Each | 8 | 190.75 | 1,526 |
| 45 | 110 mm bend | Each | 16 | 132 | 2,112 |
| 46 | 110 mm Shoe | Each | 8 | 115.95 | 927.6 |
| 47 | 110 mm | Each | 16 | 309.5 | 4,952 |
| 48 | Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. | Each | 16 | 72 | 1,152 |
| 49 | GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. | Sqm | 380 | 1,746.25 | 6,63,575 |
| 50 | 1:6 (1 cement: 6 fine sand) | Sqm | 480 | 282 | 1,35,360 |
| 51 | 1:4 (1 cement: 4 fine sand) | Sqm | 50 | 361.3 | 18,065 |
| 52 | 1:3 (1 cement : 3 fine sand) | Sqm | 120 | 253.05 | 30,366 |
| 53 | Flush / Ruled/ Struck or weathered pointing | Sqm | 80 | 214.4 | 17,152 |
| 54 | Water thinnable cement primer | Sqm | 1800 | 64.45 | 1,16,010 |
| 55 | With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) | Sqm | 150 | 61.45 | 9,217.5 |
| 56 | Two or more coats on new work | Sqm | 100 | 131.45 | 13,145 |
| 57 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 1800 | 123.85 | 2,22,930 |
| 58 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | Sqm | 1800 | 16.35 | 29,430 |
| 59 | Old work (one or more coats) | Sqm | 1800 | 56.8 | 1,02,240 |
| 60 | One or more coats on old work | Sqm | 200 | 86.55 | 17,310 |
| 61 | Old work | Sqm | 60 | 82.95 | 4,977 |
| 62 | Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. | Sqm | 200 | 94.15 | 18,830 |
| 63 | Old work (one or more coats applied @ 0.83 ltr/10 sqm). | Sqm | 250 | 74.1 | 18,525 |
| 64 | With cement mortar 1:4 (1 cement : 4 fine sand) | Sqm | 180 | 462.3 | 83,214 |
| 65 | For door/ window/ clerestory window | Sqm | 10 | 1,046.95 | 10,469.5 |
| 66 | Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. | Sqm | 120 | 59.75 | 7,170 |
| 67 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 2 | 2,007.1 | 4,014.2 |
| 68 | In cement mortar | cum | 2 | 1,698.45 | 3,396.9 |
| 69 | Of area 3 sq. metres and below | Each | 15 | 118.3 | 1,774.5 |
| 70 | 15 mm to 40 mm nominal bore | Metre | 120 | 124.1 | 14,892 |
| 71 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. | Each | 10 | 744.6 | 7,446 |
| 72 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 180 | 45.05 | 8,109 |
| 73 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 6 | 5,781.35 | 34,688.1 |
| 74 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 6 | 5,540.55 | 33,243.3 |
| 75 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Each | 10 | 5,268.85 | 52,688.5 |
| 76 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | Each | 10 | 2,275 | 22,750 |
| 77 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | Each | 10 | 1,500.05 | 15,000.5 |
| 78 | 510x1040 mm bowl depth 225 mm | Each | 4 | 6,677.4 | 26,709.6 |
| 79 | 10 litre capacity - White | Each | 10 | 1,023.05 | 10,230.5 |
| 80 | White solid plastic seat with lid | Each | 10 | 586.55 | 5,865.5 |
| 81 | 32 mm dia | Each | 15 | 104.35 | 1,565.25 |
| 82 | Rectangular shape 1500x450 mm | Each | 12 | 1,817.2 | 21,806.4 |
| 83 | 100 mm dia | Metre | 20 | 615.7 | 12,314 |
| 84 | Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms | Each | 12 | 103 | 1,236 |
| 85 | 15 mm nominal dia Pipes | Metre | 20 | 255.9 | 5,118 |
| 86 | 20 mm nominal dia Pipes | Metre | 40 | 325.1 | 13,004 |
| 87 | 25 mm nominal dia Pipes | Metre | 20 | 408.55 | 8,171 |
| 88 | 40 mm nominal dia Pipes | Metre | 20 | 674.35 | 13,487 |
| 89 | 25 to 40 mm nominal bore | Each | 6 | 757.1 | 4,542.6 |
| 90 | 15 mm nominal bore | Each | 6 | 262.3 | 1,573.8 |
| 91 | 25 mm nominal bore | Each | 6 | 369.35 | 2,216.1 |
| 92 | 15 mm nominal bore | Each | 4 | 682.9 | 2,731.6 |
| 93 | 20 mm nominal bore | Each | 4 | 709.7 | 2,838.8 |
| 94 | 25 mm nominal bore | Each | 6 | 789.95 | 4,739.7 |
| 95 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre | 5000 | 9.7 | 48,500 |
| 96 | 15mm nominal bore | Each | 6 | 500.35 | 3,002.1 |
| 97 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. | Each | 6 | 61.7 | 370.2 |
| 98 | 15 mm nominal bore, 90 mm long, weighing not less than 93 gms | Each | 12 | 170.05 | 2,040.6 |
| 99 | Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than 108 gms | Each | 12 | 183.4 | 2,200.8 |
| 100 | Rectangular shape 600x450 mm internal dimensions | Each | 20 | 1,255.25 | 25,105 |
| 101 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 1000 | 433.95 | 4,33,950 |
| 102 | 25mm thick in Grade M 25 with cement content not less than 330 kg per cum | Sqm | 100 | 678.15 | 67,815 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Annexure-B-LOC.pdf
ATTACHMENT
Cesscharge.pdf
ATTACHMENT
ComlCompliance-IVVVIVIIVIIIIXXI.pdf
ATTACHMENT
SHRAMIKKALYAN.pdf
ATTACHMENT
CheckList.pdf
ATTACHMENT
ANNEXURE-C-LOC2.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22.pdf
ATTACHMENT
annexureVIBcontractualturnoverdata.pdf
ATTACHMENT
annexureVIABidsecurity.pdf
ATTACHMENT
Annexure--I_a_I_b_IIIII-TechComp.pdf
ATTACHMENT
tmtbarsdecontrolled.pdf
ATTACHMENT
Annexure-V_VA.pdf
ATTACHMENT
GCCACSUPRO_10.pdf
ATTACHMENT
TenderDocumentChapterI-II.pdf
ATTACHMENT
JPODIGGING.pdf
ATTACHMENT
LetterregardingrecommendedlistofBrands_makeofmaterialsdated03.09.2025.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .