REPAIR MAINT OF HIGH MAST LIGHT SOLAR LIGHT ETC AND CONNECTED WORKS UNDER GE EAST AGRA.

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

Returning filling, in including spreading ,leveling, watering and well ramming in layers not exc 25 cm each complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm, thick after laying, stretching and testing the cable complete all as specified and directed.

M&L for Sub class ‘B’ bricks old size laid dry flat over the cable abutting each other, length of cable equal to width of brick complete all as specified and directed.

Laying only Sub class ‘B’ bricks old size retrieved against srl item 1 here in before laid dry flat over the cable abutting each other, length of cable equal to width of brick complete all as specified and directed.

Taking down/dismantling street light fitting any type any description from pole and transportation to store yard, testing of all components to ascertain which part of the fitting is serviceable and stacking it for reuse complete all as specified and directed.

Supply and fixing in replacement new generation, energy saving and environmental friendly long life LED High way light fitting made up of pressure die-cast aluminium housing with high power LED as lightighting source and lens embedded,electronic driver type 80 watt LED Lm 150 lm/Watt, IP 66 complete all as specified and directed .Make :- Havells Cat SAUCERGENXPROHBP80WLED757P60DBOLT G or equivalent of Phillips/Wipro

Supply and fixing in replacement new generation, energy saving and environmental friendly long life LED Flood light fitting made up of pressure die-cast aluminium housing with high power LEDs as lightighting source and lens embedded,electronic driver type 100 watt LED , IP 66 complete all as specified and directed. Make: Havells Cat JETAIRISFLS 100WLED757SYMLT G or equivalent of Phillips/Wipro

Supply and fixing in replacement new generation, energy saving and environmental friendly long life LED Flood light fitting made up of pressure die-cast aluminium housing with high power LEDs as lightighting source and lens embedded,electronic driver type 120 watt LED, IP 66 complete all as specified and directed.Make: Havells Cat JETAIRISFLS 120WLED757SYMLT G or equivalent of Phillips/Wipro

Supply and fixing in replacement new generation, energy saving and environmental friendly long life LED Flood light fitting made up of pressure die-cast aluminium housing with high power LEDs as lightighting source and lens embedded,electronic driver type 70 watt LED 6000K, IP 66 complete all as specified and directed. Make: Havells Cat JETA PROFL70WLED757LT G or equivalent of Phillips/Wipro

Supply and fixing in replacement new generation, energy saving and environmental friendly long life LED Bulk head fitting made up of pressure die-cast aluminium housing with high power LEDs as lightighting source and lens embedded,electronic driver type 10 watt LED 6000K, IP 66 complete all as specified and directed. Make: Havells Cat HEXAFT10WLED857SSYMBOPC or equivalent of Phillips/Wipro

M & L in replacement weather proof flat twin core aluminium conductor 4 sqmm PVC insulated , sheathed wire complete all as specified and directed .

S&F in replacement on pole ,dust proof, vermin proof , out door type Polycarbonate box incl MCB SPN 6 Amps,, SPN bus bar, insulator,GI nut, bolts and washers and aluminum lugs etc with and including FI clamp made out of 30 mm x 3 mm , nut and bolts complete all as specified and directed. Make of box & MCB : Make: Legrand/ABB/Schenider

S&F in replacement Street light bracket made out of 40 mm dia GI light grade pipe 1.2 mtr long bend to shape 120 degree and duly fixed alongwith existing pole/bldg with the help of 2 Nos of MS clamp of sizes 32x3 mm including suitable size of bolt ,nuts, and washers complete all as specified and directed. Make of GI pipe : Tata/Jindal

S& F in replacement Driver for LED 45 Watt 230 Volt, AC complete all as specified and as directed.

S& F in replacement Driver for LED 60 Watt 230 Volt, AC complete all as specified and as directed.

M&L PCC 1:4:8, type D-2, (using 40mm graded crushed stone aggregate), as in sub base of floor for transformer and foundation of poles complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate), as in floor finsihing transformer, finishing cement concrete surface even and smooth using extra cement, and coping of poles complete all as specified and directed.

Supply and laying connecting and testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable with aluminium conductor 1100 V grade cross sectional area 10 Sq mm 2 core including taking out old unsv cable complete all as specified and directed.

Supply and Laying connecting and testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable with aluminium conductor 1100 V grade cross sectional area upto 16 Sq mm 4 core including taking out old unsv cable complete all as specified and directed.

Supply and Laying connecting and testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable with aluminium conductor 1100 V grade cross sectional area upto 50 Sq mm 3.5 core including taking out old unsv cable complete all as specified and directed.

Removing of old paint by removers scrubing from LT steel poles 9 meter long, cross arms clamps etc for painting and M &L for painting with one coat of superior quality aluminum paint on exposed surface of poles and street light bracket mounted on the poles,junction box etc and making black strip upto1.5 Mtr height from ground level and writing pole Nos etc. written on it with black synthetic enamel paint compete all as specified and directed. Make of paint : Asian Paint(Apcolite), Shalimar(Superlac Hi Gloss), Nerolac Paint (Nerolac full Gloss).

Supplying and fixing in replacement MCCB, 63 Amps, 4 pole, 415 Volts, AC supply, having breaking capacity Icu = 16 KA with fixed load setting, thermal magnetic release including dismantling old one complete all as specified and as directed. Make: Legrand cat part 4200 13 or equivalent in ABB/Schenider

Supplying and fixing in replacement MCCB, 100 Amps, 4 pole, 415 Volts, AC supply, having breaking capacity Icu = 16 KA with fixed load setting, thermal magnetic release including dismantling old one complete all as specified and as directed. Make: Legrand cat part 4200 15 or equivalent in ABB/Schenider

S&F in replacement PVC Aluminium conductor cable 2.5 sqmm 2 core including taking down old unsv PVC Alu conductor cable complete all as specified and as directed.

Supply and fix in replacement stay assembly using GI stay rod 20 mm dia complete with stay plate mild steel of size 300x300x6.00mm thick, stay bow complete all as specified and shown in Electrical Plate No 1 . (Necessary earth work, stay wire, loop insulator,clamps and PCC shall be measured and paid seperately) complete all as specified and directed.

Supply and fixing in replacement Galvanised stay wire of size 7/4mm all as specified and directed.

Supply and fixing in repair for loop type insulator large size porcelain vitreous of size 90 x 140 mm clearence of hole 16mm complete all as specified and directed.

Taking down of old unserviceable Solar Security Lights including replacement of old unserviceable wiring as per existing and refix in position complete all as specified and as directed.

S&F in replacement of smart integrated solar street (All in one system) 18 Watt with built in mono crystalline panel, Lithium ferro phospate (Lite PO 4) Battery , MPPT charge controller and PIR sensor with colour teperature 6000-6500 K complete all as specified and directed. Make : Bajaj/Surya/Axxon

S & F in replacement of street light switch using timer for automatic switching of street light based on LUX level of natural light , The sensor along with suitable power contactor MCB support terminal shell be housed in enclosure complete made out of anti rust/ shock proof/ termite proof/ confirming to IP 54 suitable for 12 KW load compete all as specified and directed Make of Contactor ABB/BCH/Legrand, Make of switch: Timer Nature switch/ Legrand

Supplying and fixing in replacement power contractor,3 pole with AC coil 230 volt, 2 NO + 2 NC , capacity 40 Amps compete all as specified and directed. Make: Cat Pt No 4161 30 of Legrand or equivalent in Havells/ABB/Schenider

Supplying and fixing in replacement power contractor,3 pole with AC coil 230 volt, 2 NO + 2 NC , capacity 50 Amps complete all as specified and directed. Make: Cat IHPAA050511 or equivalent in Havells/ABB/Schenider

S & F in replacement of street light switch using timer for automatic switching of street light based on LUX level of natural light , The sensor along with suitable power contactor MCB support terminal shell be housed in enclosure complete made out of anti rust/ shock proof/ termite proof/ confirming to IP 54 suitable for 08 KW load compete all as specified and directed Make of Contactor ABB/BCH/Legrand, Make of switch: Timer Nature switch/ Legrand

M&L for drilling suitable dia horizontal bore holes for insertion/ laying of 50/40 mm bore GI tubing of any description below/under existing road surfaces / floors at a level not less than 0.60 mtr etc with using mechanical / or manual devices as required at site including making good the disturbed surfaces to match with the existing after laying pipes complete all as specified and directed. Note : (i) Cost of equipment tools and plant material (horizontal boring rig machine) required for boring shall be arranged by contractor at no extra cost to the Govt. (ii) GI Pipe 40 mm will be measured and paid separately

M & L in replacement for GI pipe light grade 40 mm dia with all fitting laid in bore holes/trenches/drian/culvert or fixed along with pole/wall including 02 Nos FI clamps of 25x3 mm including nut, bolts etc. complete all as directed. Make of GI pipe : Tata/Jindal

Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to GI wire 4.00 mm as main earthing lead by means of galvanized bolts, nuts and washers with connected to earth test point & to main switch board etc. all as specified and testing on completion with and including necessary excavation and earth work in any type of soil, earth electrode, earthing lead from electrode to equipment/substation/panel etc, adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/Basalt stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover reinforced with 6mm dia bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 20 mm dia with funnel and wire mesh, and 15 mm dia GI light grade earth lead protection pipe, complete all as specified and directed. Note : Earth lead & GI protection pipe up to 7.5 m shall be deemed to be included in quoted rate.

Material and labour for disconnecting the motor by delinking the pump set opening the motor removing the unserviceable winding from the motor, stator cleaning the stator slots rewinding with appropriate size copper winding wire insulating to the existing class of insulation varnishing backing , assembling, making necessary connections, testing and commissioning 3 Phase induction motors of 5 HP Capacity 3 phase 415 vots 50 HZ AC supply complete all as specified and as directed.

M & L for steel rope for raising and lowering of luminaires with carriage having safe working load 750 kg, 7/19 construction 6 mm dia, AISI 316 grade having breaking cap 2350 Kg, handling with motorised and manually by means of handle in case motor is faulty or failure of electric supply, complete as per standard engineering practice to avoid falling of carrirer during raising or lowering complete all as specified and as directed.

Balaji Associates

M/S RAJENDRA KUMAR AGARWAL

M/S R.S. CONTRACTOR & SUPPLIER

Mani Control System

M/S NAVIN & ASSOCIATES

LUCKY SALES CORPORATION

Shiva Enterprises