Maintenance work like flooring, Painting and Electrical arrangement at magalir suya uthavi kulu building at Erumanthangal ward no 05 in villupuram municipality.

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers -Mixing by mechanical means

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Brick work in Cement Mortar 1:5 Mix using country Bricks of size 8¾ x 4¼ x 2¾ including cost of bricks and conveyance and including all labour charges and all other incidential charges etc., completed as per standard specifications.

Brick Partition Walls using II class ground moulded chamber bricks of size 9"X43/8"X 23/4" in C.M 1:3 (One part of Cement and Three part of Crushed Stone Sand (M- Sand)) using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification - 10 sqm

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m S.I.333

Wiring with 3 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch (two way) with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC straircase light point SD-27

Wiring with 2 x 4sqmm (56 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for 15A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire for Open PVC power plug point.SD 41

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp SD 110

Supply and fixing of single box type 28W T5 flu fitting Philips MIROLTA Slim T5 TMS540 HF 1xTL5-28W/Havells / Crompton make complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.[ Data- J] SD -87

Cost and supply of 25 mm pvc pipe inculding cost and conveyance of materials etc., complete (Page No:39)

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements

15mm PVC tap

20mm X 15mm PVC Elbow

20mm Elbow

20mm Tee

25mm X 20mm Tee

25mm X 20mm Reducer

25mm Tee

25mm Jet Nipple

25mm Elbow

Drilling of 150 mm dia vertical bore well in hard rock area including drilling charges and including injection of casing pipe in the drilled hole etc complete (Page No:219)

Supply and delivery of 160 mm dia PVC causing pipe 6KSC/CM2 including cost of pipe ea complete

Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including the jointing the pipes with PVC couplers with cement paste etc. complete(150mm CS)

Supply and delivery of Wet type Submergible including all labour charges etc., complete., Submergible Motor 15 lpmx 80m.head 1 H.P (Page No:96)

Supply of 32mm UPVC Pipes specially made for deep borewell Submersible motor erection (ISI Make) including all cost materials, conveyance labours etc., complete as directed by departmental officers.

Cost and supply of 4Sqm cable 3 core including cost and conveyance of materials etc., complete (Page No:114)

Cost and supply of Nylon rope including cost and conveyance of materials etc., complete

Cost and supply of 40mm Clamp Set including cost and conveyance of materials cost etc., complete (Page No:42)

Cost and supply of 160 mm pvc end cap including cost and conveyance of materials cost etc., complete

Cost and supply of Panel Board including cost and conveyance of materials cost etc., complete

Labour charges for Errection of submergible Pump set in bore well including fixing and jointing submergible cable with proper clamps up to the starter to required depth and also fixing of riser pipes to the required depth values Errection clamps pressure gauges up to the exterior wall of pump room and errction of panel board consisting of TPICN switches starter volmeter ammeter three pilot indicator lamps complete and testing the pump set and trail run for 10 days up to 5 HP. (Page No:226)

GST. 18% (CGST-9%, SGST-9%)