HALF YEARLY REPAIRING OF 1.5 HP SUBMERSIBLE MOTOR , PUMP AT VARIOUS 33-11 K.V. SUB-STATION, OFFICERS COLONY, KESCO, KANPUR.

Extraction of defective VT submersible pumps and motor with 60" x 90" column pipe and then lowering of the repaired pump and motor with pipe and testing the same including checking main cut-out fuse and operation of Tube well for 24 hours fo rits smooth working with all cost of materials,labour and T&P etc required for the proper completion of the work(CSI NO. 29.70)

Providing and fixing 15 mm dia C.P. brass bib cock of approved quality conforming to IS:8931 :(CSI NO. 18.49.1)

Supply & fixing of steel wire rope for submersible pump including cost of labour, T&P and material required for completion of work.(CSI NO.29.56)

Supply and installation of 0.5 HP Kirloskar or equivalent make horizontal, self priming, single phase ,monoblock tullu pump including cost of labour, T&P and material required for completion of work (CSI NO.29.53)

Supply & Installation of 1 HP outlet 32 mm dia. or more, Head 78/30,Discharge 1100/2800 LPH submersible pump of K.S.B/ CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work. (CSI. No.29.55(A))

Repairing of all type of starter for single three phase inlcluding replacement of coil and kid condunsor complete in all respect. (Ag. No. 34/17-18) (NSI)

Supply and fixing of submersible cable Havels or equivalent make, for submersible pump complete in all respect. 1.5 mm2 for upto 1 H.P. Pump. (OLD CSI. No.19.33a)

Supply and fixing of submersible cable Havels or equivalent make, for submersible pump complete in all respect. 2.5 mm2 for pump above 3 H.P. upto 7 H.P. Pump. (OLD CSI. No.19.33B)

Supply & installation of electrical control panel for 1 HP pump set single phase of L&T / Havells or equivalent make for submersible pump / pumpset containing contractor relay condenser. (CSI. No.29.54(A))

Supply & installation of electrical control panel for 1.5/ 2 H.P. pump set single phase of L&T / Havells or equivalent make for submersible pump / pumpset containing contractor relay condenser. (CSI. No.29.54(B))

Providing and fixing 20 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.(CSI. No.18.12.2)

Providing and fixing 25 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.(CSI. No.18.12.3)

Providing and fixing 32 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.(CSI. No.18.13.4)

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore(CSI NO. 18.17.1)

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.(CSI NO. 18.48A)

Attending to petty maintenance service like plumbing service,welder service, mansion service and carpenter service required as below. (Job attending by one no. Plumber/welder/mason /carpenter with one no. helper per hour or part of an hour.)(CSI NO. 29.80)

Supply and fixing of submersible cable Havels or equivalent make, for submersible pump complete in all respect. (CSI No. 19.33)d) 6.0 mm2 for pump above 7.5 HP and up to 15 H.P. (OLD CSI. No.19.33d)

Lowering of M.S. column pipe in tubewell including supply of nuts, and bolts, packing and also carriage of pipe from workshop to site including all labour, T&P etc. required for proper completion of the work. (OLD CSI No. 19.27)c)32 mm dia.

Supply and fixing of G.I. ("B" class ) column pipes JTC/ JINDAL make with column coupling socket as required for proper completion of work including all labour material & T&P. (OLD CSI No. 19.22)d)32 mm dia.