Addn / Altn to Bldg No P-95 and Provn of Renovation of toilet block of bldg No. P-34 at Mil Stn Patiala under GE(S) Patiala

Amount

Demolition of cement concrete (unreinforced) of any description and any position not other wise specifically provided.

Taking down cement plaster on brick Walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc.

Demolition of cement concrete (Reinforced) of any description and any position not other wise specifically provided reinforcement cut as required to facilitate demoltion.

Cutting opening through bricks wall built in CM for doors/ window and other openings or enlarging existing openings etc. or cutting out defective brick work for under opinning, including providing, fixing and removing shoring, cleaning and removing rubbish not exc. 50m.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth and getting out in soft/loose soil as in foundation of walls etc. complete all as specified.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 3.0m in depth and getting out in soft/loose soil as in foundation of walls etc. complete all as specified.

Cement Concrete 1:4:8 type, (using 40mm graded crushed stone aggregate), as in foundation, filling and mass concrete all as specified and as directed .

Returning, filling in including spreading leveling watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed.

Removing surplus spoil to a distance not exc. 50 M and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed.

Brick work with sub class “B” bricks straight or curved on plan to any radius built in CM 1:6 using all as specified using old size bricks

Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

TMT bars 10mm dia and over cut to lengths bent to shape required including cranking bending and spirally hoping for columns, beams hooking ends and binding with MS wire annealed n.less then 0.90mm dia.

TMT bars 6 to 8 mm dia cut to lengths bent to shape required including cranking bending and spirally hoping for columns hooking ends and binding with MS wire annealed n.less then 0.90mm dia.

TMT bars 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders.

M&L RCC (Design Mix) M-25 (20 mm graded aggregates) for foundation, footing, plinth beam, bases of column

M&L RCC (Design Mix) M-25 (20 mm graded aggregates) for Columns, pillers, piers, post and struts

Reinforced cement concrete M-25 Grade (Design Mix) concrete, as in Slabs and beams Supported on columns.

M&L RCC (Design Mix) M-25 (20 mm graded aggregates) for Beam, cantilevers, bressumers, lintel over 1.5 m span

M&L RCC (Design Mix) M-25 (20 mm graded aggregates) for chajja

Rendering 10mm thick in CM 1:6 on other then fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified.

Rendering 15mm thick in on fair faces of brick work or concrete surfaces finished even and Fair without using extra cement all as specified using WPC. Note:- WPC to be measured and paid for seperately under respective item of this schedule)

Supply only integral water proofing compound.

Rendering 5mm thick cement plaster in CM 1:3 on ceiling concrete surface facia chajja roof projection etc finished even and smooth without using extra cement.

Roughening of existing surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust, etc. all as specified and directed by Engr-ln-Charge.

Three coats of white wash on ceiling surfaces incl preparation of new plastered surfaces.

Applying acrylic wall care putty in external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving exterior painting complete all as specified and directed. (Make of wall Putty : JK wall Putty / Birla Wall care Putty / Bison Wall Putty) Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. (Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality]) (Make of Exterior Emulsion : Asian (ACE) / Berger (WALMASTA) / Nerolac (SURAKSHA SUPERIOR))

Applying acrylic thick wall care putty on internal surfaces of walls/ceilings (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving exterior painting complete all as specified and directed. (Make of wall Putty : JK wall Putty / Birla Wall care Putty / Bison Wall Putty) Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

(a) M & L for one coat of Truecare Interior Wall Primer (WT) of Asian Paints or equivalent from Berger Paints/Nerolac Paints finishing the interior rough plasters surface a smooth finish complete all as specified and directed. (b) M & L for two coats of oil bound distemper from Asian Paints or equivalent from Berger Paints/Nerolac Paints by use of mechanical equipments/applicators as per manufactures instructions complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of OBD : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH) .

Preparation of new/old or previously untreated steel or iron surfaces and apply two coats of synthetic enamel paint over a coats of red oxide.

Cement Concrete 1:2:4 type B-1 as in bed plates, benching coping etc and similar items including weathering slightly rounded or chamfered angles and throating on top of chajjas rails cills etc.

Providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf. Make (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by AO

Framless Tempered Glass door shutter using having thickness 10 mm(all exposed edges polished and rounded) including necessary Hings of stainless steel to accommodate glass, screws, Handle etc complete all as specified and directed. Note: - (i) For the purpose of measurement and payment overall size of shutter shall be considered. (ii) Unit rate quoted include for provision of necessary aluminium fittings such as hinges, disc handle, and glass door patch fitting lock etc.

S&F Framless Tempered Glass exc 3 Sqm having thickness 10 mm(all exposed edges polished and rounded) including necessary Fixing assesories of stainless steel to accommodate glass, screws, etc complete all as specified and directed.

M&L Aluminium mesh grill fixed in window fram having Aperture Opening size usual 67mm × 84mm Cord dimension 7mm × 5.8mm plate thickness: 2mm.

Vitrified colour tiles dark shade (as approved by GE) 8 to 10mm thick (square/rectangular) polished,area of each tiles not exceeding 0.72 sqm, all as in floors and skirting etc. set and jointed in neat cement slurry @ 3 Kgs/sqm and pointed in coloured cement to match the colour of tiles all as specified and directed.

Non-skid glazed ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over a coat of cement slurry @ 3 Kg/Sqm .

Screed bed or Bedding Layer 15mm thick of mortar for laying floor tiles in CM 1:4 finished rough.

Machine cut Mirror polished Kota stone slab flooring 20mm (+ 2mm) thick laid over and including 20mm (+ 2mm) thick screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing, polishing complete all as specified and directed.

Cement Concrete 75 mm thick Type D-2 1:4:8 using40mm graded aggregate for sub base finished rough for laying floor finishes.

Rendering 10 mm thick cement plaster in CM 1:4 ( for laying wall tiles) finished rough.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Formwork to soffits for fair face of roof slabs, floor slabs, landings and similar work; not exceeding 200mm thik.

Formwork to sides and lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

Formwork to chullah hoods, chajjas, for fair finish troughs and similar items including edges

Bitumastic gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces

Powder coated decorative type mild steel curtain rods 32mm dia including a pair of brackets for each curtain rod supplied and fixed incl drilling holes/ plugging to walls etc, with PVC rawl plugs/ wooden gutties as approved by Engineer-in-Charge including taking down the existing unserviceable curtain rods complete all as specified and directed

Applying evenly a tack coat of industrial bitumen 85/25 or equivalent VG Grade @ 1.2 Kg per Sqm complete all as specified and as directed.

APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified

Cement concrete tiles 20cm x 20cmx 20mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished

Screed bed or Bedding Layer 15mm thick of mortar for laying of PPC Roof tiles in CM 1:4 finished rough.

100 mm thick precast cement concreteType B1 1:2:4 (20mm graded aggregate) in as in cover slab of size 1000 X 585mm fixed with CM (1:4) complete all as specified and directed.

Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area

Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured)

Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall

Galvanised, corrugated mild steel sheeting 63mm thick with two corrugation side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 275.

S & F PVC ( SWR) rain water pipe 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete as specified including flat iron clamps 25x3mm complete all as specified.

PVC (SWR) bends/shoe of radius for 110 mm bore complete all as specified.

Glazed ceramic coloured tiles in verticle surfaces 300 x 600 x10mm thick grade B-II (b) glazed economy finish set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over 10mm thick rending in cm 1:4 as screed incl dismentelling complete all as specified and as directed.

Ceramic tile 7 to 8 mm thick non skid or mat superior finish Grade B-I / B-II (b) joint free with rectified edges area of each tile exc 0.11 sqm but not exc 15mm thick screed / bedding layer in CM 1:4 complete all as specified and as directed.

Vitrited ceramic tile 10mm light colour polished area of each tile not exc 0.36 Sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over 15mm thick screed/ bedding layer in CM 1:6 complete all as specified and as directed.

Rotional moulded polythene water storage tank 500 ltr capacity supplied hosited and fixed in position all as specified in SSR part-I connected to inlet or outlet and washout fixed in repair i.e., inclding dismantling existing unserviceable water tank of any discription and removal from site complete all as specified and as directed.

Ball brass valved high presure with polythene floated and flynut complete screwed for 20mm bore iron pipe or brass ferrule and fixed in repairs complete all as specified and as directed.

Stop cock cast copper alloy cast copper alloy chr0miun plated screwed down high presure with capstain head fancy type with long shank and cup , scrwed both ends for 15mm bore iron pipe or for union and fixied in repair make "Prayag cat part no 8318/8320 or equivalent complete all as specified and as directed.

Stop cock cast copper alloy with crutch or butterfly handle screwed down high presure screwed for 20mm bore iron pipe or for union and fixied in repair complete all as specified and as directed.

M&L for toilet paper holder with flat recessed type stainless steel complete all as specified and as directed. Make - Jaguar cat part no ACN 1151N /marc /cera or equivalent as approved by AO.

Bib taps cast copper alloy cast copper alloy chromiun plate fancy type with capstain head screwd down screwed for 15mm bore iron pipe or for brass furrule make Prayag cat part no 8606 Ripples series or equlivalent and fixed in repair all as specified.

Angle cock with flange cast copper alloy chromium plated with capstain head fancy type screwed down high presure screwed for 15mm bore iron pipe or for unions fixed in repairs make prayag cat part no 8610 or equivalent Repples series complete all as spcified and as directed.

Basin mixer cast copper alloy chromium plated with capstain heads fancy type screwed down high presure with or without letters Hot or Cold with long screwed shanks and flynut screwed for 15 mm bore iron pipe fixed in repair make prayag cat part no 8650 or equivalent Repples series complete all as spcified and as directed.

Vitreous china wash hand basin white flat back size 550 x 400 mm inclding PVC waste pipe 32mm bore and cv waste coupling with and incl a pair of suitable mild steel brackets fixed all in repairs including cutting for or pinnig in and making good distrubed portion as reqd complete all as spcified and as directed.

S&F bathroom cabinet made out of acrylic sheet 2.5mm thick overall size 622 x 422 mm with looking mirror male prayag cat part no 555 or equivalent as approved

S&F PTMT soap dish holder square make prayrag cat part no 195-1 or equilvalent as approved complete all as spcified and as directed.

S&F tubular towel rail 24'' (600mm) PTMT fixed in repair make prayrag cat part no 200 or equivalent as approved complete all as spcified and as directed.

S&F single liver concealed Deusch mixer with provision for connection to over head shower fenncy type cast copper alloy chromium plated screwed down high presure and fly nuts screwed for 15mm bore of iron pipe and all as specified. Make - Jaguar cat part no VGP-81227/81229 or equivalent as approved by AO.

Vitreous china wash down water closet pan white inclding white plastic seat cover with mild steel CP hinging device suitable brass CP wash jet with 1.00 to 1.50 m long tube incld making connection to inlet flush pipe and to P or S drain trap incld supply of long special P or S trap fixed in repair complete complete all as spcified and as directed.

PVC valvesless syphonic action type flushing cistern low level 10 ltr capacity Dual flush mechanic incl PVC flush pipe 32 mm bore and mid steel bracket of angle iron 25 x 25 x3 mm over all length 20cm with red oxide primer complete all as spcified and as directed incld taking down any type of flushed cistern and making good the distrubed surfaces in CM 1:3 complete all as spcified and as directed. make of flushing cistern prayrag cat part no 502 or equivalant complete fixed in repairs

450mm long PVC connection with brass nuts on both ends for 15mm bore pipe approved quality complete and fixed in repair all as specified and directed

S&F steel water tubing 15mm bore medium grade galvanised with all fitting and fixed complete wall and ceilings or laid in floor incl making connections with existing pipe if reqed at site complete all as spcified

S&F steel water tubing 20mm bore medium grade galvanised with all fitting and fixed complete wall and ceilings or laid in floor incl making connections with existing pipe if reqed at site complete all as spcified

Taking down cement plaster on walls built in cement mortar including racking out joint hacking for key scrubing down with water complete all as spcified and as directed.

M&L 15mm thick cement plastering in cement mortar 1:4 on brick or concrete surface of wall finish fair and even without using extra cement complete all as spcified and as directed.

All as per srl item no as above here in before but in cm 1:6 finishing even and smooth without using extra cement.

M&L for rendering 10mm thick in cemrnt mortar 1:3 as on concrete surface in ceiling finished even and smooth without using extra cement all as specified

M&L for preparation of new plastered or unplasterd suface of walls and apply two coat of oil bound distemper over a coat of wall care putty with smooth surface over a coat of alkali resistance primer complete all as spcified and as directed.

M&L for preparation of new plastered or unplasterd suface of ceilling and applying three coat of white wash on ceiling surface complete all as spcified and as directed.

M&L for preparation of new plastered or unplasterd suface of walls and apply two coat of cement based paint over one coat of alkali resistance cement priming complete all as spcified and as directed.

Taking down eves gutters and rainwater pipe including all fitting head sheos bends swan neaks complete all as spcified and as directed.

Cast iron 75mm bore soil waste and vent pipe in any length without ear with cement joint fixed eo walls in floors . With or without flat iron 25 x 3 mm clamps fixed in repair all as spcified and as directed.

Description all as per serial item no 75 here-in-before but 100mm bore of pipe complete all as specified and as directed.

Extra over cast iron pipes and fitting if lead joints are provided in lieu of cement joints for 75 mm dia / bore of pipes complete M&L.

Extra over cast iron pipes and fitting if lead joints are provided in lieu of cement joints for 100 mm dia / bore of pipes complete M&L.

S&F cast iron floor trap, dia of out let 75/100mm as reqd at site and as directed by Engineer-in-charge with CP grating 100/125mm size incl jointing waste pipe in run lead complete all as specified and as directed. Note:- Lead joints to be measured and paid for separately under respective item.

Cast iron branch pieces double, ordinary or inverted o with parralled branched suitable for 75 mm bore pipe as in repairs shifited with oval access doors jointed run and lead all as specified and as directed. Note:- Lead joints to be measured and paid for separately under respective item.

Same all as per item 94 above but single branch pieces 100 mm bore. Note:- Lead joints to be measured and paid for separately under respective item.

CI Cowl suitable for 75/100 mm bore pipe supplied and fixed complete fixed in repairs.

M&L for point wiring with 1.50 sqmm in copper conductor cable ( multistrand) FRLS single core PVC insulated cable in and including PVC concealed conduit ( ISI Marked) of heavy duly with all accessories ie PVC gutties etc terminated in sunken/Modular pressed metal flush box and modular cover plate with frame for mounting of switches /sockets/ fan regulators etc and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLS controlled by one switch for one light/fan/sockets point/ all as specified and directed by Engr-in-Charge in ceiling Portion surface conduit wiring to be done. (Make: Havells/Plaza/polycab) Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.

All as per item No 97 above, but for one 3/5 pin socket outlet 5 Amp on the same board with other switches complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 97 above, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 97 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

M&L for Modular Socket 6A/16A - 2/3 pin combined 2 module type all as specified and directed. (Make: Havells/ cona/ ssk)

M&L for Modular Socket, 6A - 2/3 pin combined 2 module type all as specified and directed. (Make: Havells/ cona/ ssk)

M&L for Modular switch 1 way 6A, 1 module (Make:SSK/ Cona/ Havells)

M&L for Modular switch 1 way 16A, 1 module type all as specified and directed. (Make: Havells/cona/ssk)

M&L for Fan step regulator, 120W - 2 module

Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed by the Engineer-in-Charge. (Make: Havells/ cona/ ssk)

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 6 Sqmm multi -strand copper conductor drawing in PVC concealed conduit with 4 Sqmm PVC copper conductor cable as in earth wire system, including taking out old wiring complete all as directed.

Supply & fix in replacement of existing unserviceable Sheet metal enclosure with new DB’s suitable for MCBs of single pole and neutral 8 way double door type with 200 amp rated bus bar. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The disturbed surface shall be match with existing shall be part of job. (Make: Havells/ Legrand/ ABB)

Supply and fix in replacement of MCB SP up to 6-32 Amp all as specified and directed. (Make: Havells Cat part No : DHMGBSPF006-032 or equivalent in Schnider/ Legrand)

Supply and fix in replacement of MCB SPN 6-32 Amp complete all as specified and directed. (Make: Havells Cat part No DHMGCSNF006-032 or equivalent in Schnider/ Legrand)

Supply & fix in replacement of existing unserviceable FTL with new techonlgy ultra bright led tubelight with aluminium heat sink & polycarbonate diffuser having high efficacy suited for installation in existing t5 tubelight with G5 lamp holders to give glare free light with separate led driver of capacity 18W 865 1148mm LED including neccessary electric conection with batten. (Make:POLYCAB Model : AELIUS LED TUBE Cat Part No: LTU0101004 / Havells Model : TITANIA sleek new t5 LED tube light Cat Part No: lHlDCNVENL8Z018 or equivalent in / WIPRO)

Supply & fix in replacement of existing unserviceable batten with BOX TYPE Pre-coated CRCA body, heavy duty regaL Batten for LED tube universal batten for G13 t8 lamps including neccesary fitting on wall and making electric connection from ceiling rose to connector with suitable size of electric cable and making good the disturbed surface. (Make: POLYCAB Cat Part No: PID0502001 / Havells Cat part No: lHFYBWP1TB1W020 or equivalent in)

Supply & fix in replacement of existing unserviceable mirror light with Linear & compact 9W mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser of capacity 9 watt Model:EDGE LItE Cat part No: LHEXARP6PN1W009 (Make: Havells or equivalent in Philips/ CG/ WIPRO/ Polycab)

Material and labour for angular type lamp holder, PVC/ polycarbonate type with back plate suitable for 15/18 watts for batten fitting, including plastic square board of required size complete all as specified.

Supply and fix LED Lamp LED new Adore 7W E27 WW Ball Lamp LHLDERHEMD 8X007 7 watt all as per Havells or equivalent in Bajaj/CG/Havells/WIPRO/POLYCAB

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frme 40*40*6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I

Supply and replace environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit led luminaire comprising of high brightness leds of capacity10 Watt Cat Part No: lHEOAOP7UZ6W010 Make: Havells or equivalent in Philips/CG/WIPRO

Vipin Kumar and Brother

NORTON BUILDER

Buttar Construction Co.

M/S Mukesh Kumar Gupta

Arneja Builders