CONSTRUCTION OF GOVT. COLLEGE FOR WOMEN AT BALLABGARH IN DISTRICT FARIDBAD (SCHEDULE FOR THE WROK PDG. 4K PTZ CAMERA FOR LECTURE RECORDING SYSTEM, WIRELESS SPEAKER PHONE WITH AUDIO CONFERENCE SYSTEM AND SOUND and LIGHTING SYSTEM)

Amount

SITC of Camera with 10X Optical Zoom - Connection/Interface - USB interface Video Resolution - 1920 x 1080 pixels (1080p @ 30fps) should support on Board H.264 or better on board Encoding to save PC processing power and should support USB 2.0 Plug and play. Field of View - Minimum of 68 degree(DFOV) or above field of view, Optical Zoom - The camera must support at least 10x optical zoom,16x Digital zoom, Colour - It should support 24 bit color or better, Length of cable - 3 meter or above, Aspect Ratio - The system should support 16:9 or higher, Anti flicker compensation - Should be there, S/N Ratio - ) 55dB, Pan range - The camera should have a PAN rotation angle of -170 degree to plus 170 degree or better, Tilt range - The camera should have a Tilt rotation angle of -30 degrees to plus 90 degrees or better, Communication Interface - 1xRS232 In: 8 pin Min, Max Distance: 30m, Protocol: VISCA/Pelco-D /Pelco-P, Accessory - The camera should be supplied with IR remote control and wall mount kit as an included accessory, Certificate - Should be CE,FCC,RoHS and CB CERTIFIED based on latest 2020-2021 CB International standard and also CB Test Reports to be submitted. Makes PROMARK/SOLVISION/PROMINE

SITC of Wireless Collar Mic, Frequency Response 400Hz to 10kHz,Material Metal, Plastic, Charcoal, Operating Temperature 5 to +45 Degree C,Size/Dimension 54 x 136 x 138 mm (H x W x D), Mounting Tabletop, Length Of The Microphone From The Base Of The Stem. Make Promark/ Dynacord/ Electro Voice

SITC of Digital Audio Processor Compact Build Quality,2 Combo Inputs with Professional D-Pre Mic Inputs,24-bit/192 kHz for Best Audio Experience,High Speed Usb 3.0.Midi I/O for flexible connection to external gear. Line outputs (Balanced),Frequency Response,20-20kHz ± 0.02dB,Dynamic Range 120dB, THD+N-109dB, Maximum Output Level,16dBu,Impedance 200Ω. inputs Frequency Response 20-20kHz ± 0.15dB Dynamic Range-112dB (A-Weighted) THD+N-80dB @ minimum gain Maximum Input Level 12dBu Gain Range 57dB Impedance-1MΩ Make Promark/ Dynacord/ Electro Voice

Supply, Installation, Testing and Commissioning of Wall Mount 6U x 600W x 600 D ,Front Glass Door (tinted,Toughened) with Lock & Key, 2 pairs of 19" Mounting Rails,1U Cable Manager (1), Hardware Packet (1 Pkt),5 Socket 5 Amp. Power Distribution Unit (1 No) Roof Mounted Fan Unit / 90 CFM /230V AC (1 No).Rack should be as per DIN41494 Standards.OEM must be ISO 9001,14001 certified complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work. Make:- HCL /Comrack/Ritall/Hive Network

Supply, Installation, Testing and Commissioning of Speaker Double Unit, clear sound level, mellow, transparent, clear and bright, strong bass; Strong input, power rating 2x40W can adjust the high and low pitch raise of the input signal complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work. MAKE: Promark/Solvision/Yamaha

Supply, Installation, Testing and Commissioning of 2 core 1.5mm Speaker wire with XLR cable complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work. Make:Polycab/RR Kabel/ Havells

Supply, Installation, Testing and Commissioning of 2 core 1.5mm Power Cable complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work. Make:Polycab/RR Kabel/ Havells

SITC of Wireless speakerphone with audio conference system with Full duplex deep echo cancellation, 48k broadband voice call HD technology, intelligent microphone mixing, dynamic noise suppression, automatic gain technology The main microphone has 4 built-in unidirectional microphones to form a 360-degree sound pickup, and the collection distance is 12 meters.Support Bluetooth and USB.Support LINE IN/OUT analog interface, connect external communication terminal through 3.5mm audio cable, support video conference system, multimedia communication system, network conference platform.Perfect expansion capability. The product is equipped with an expansion unit. The speakers and microphones of the main unit and expansion unit are fully synchronized, and can be controlled each other at the same time, which greatly optimizes the omnidirectional microphone pickup and playback performance.The speaker system adopts a multi-core digital unit with a volume up to 85dB and a 16-level speaker volume digital adjustment.Multiple buttons: Off-hook, hang-up, microphone mute, volume increase and decrease, and Bluetooth.Built-in battery 5400mA, working duration is more than 10 hours. Standby time is 90 days. Make:Promark / Solvision/Promine

SITC of LCD Laser Projector 6000 Lumens with single lamp, WUXGA 1920 x 1200 Native Resolution, 16:lO Native Aspect Ratio,3,000,000:1 (all white/all black), Pixel Clock 162 MHz, Scan Rates: horizontal: 15 kHz to 100 kHz, vertical: 24 kHz to 85 kHz, inputs: HDMI 2 nos, RGB D-Sub 15pin, , Composite Video, S-Video & USB, Outputs: RGB D-Sub 15pin, Control: RS-232, RJ-45 LAN with zoom lens as per site requirement etc. complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work Make: Panasonic/ Vivitek/ Epson

SITC of 4K HDR Four-Input HDMI Switcher, INPUT: 4 HDMI connectors etc. complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make: Solvision / Extron / Kramer

SITC of 1 Nos HDMI with 2 input/ RJ45 Faceplate with 2 input, 6 nos Microphone floor stand, 2 nos Floor Box with 3 chasis Mount XLR and 1 Stange Monitor Connector, on MS Stage Box to accomodate all connectors , HDMI Cable etc. as per site requirement complete in all respect upto the entire satisfaction of Engineer-in-Charge of the work Make: Solvision/Extron/Kramer

SITC of (HDMI, HDCP version 1.1); HDMl 4K/UHD capability @ 60 Hz with 4:4:4 chroma sampling, plus support for HDR formats HDCP 2.2 compliant HDBaseTTM extender kit for HDMI® up to 230 feet (70 meters) HDMI signals etc. as Per site requirement complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make: Solvision / Extron / Kramer

SOUND REINFORCEMENT SYSTEM SITC of Point Source Passive Loudspeaker for FOH and Delay with 12” LF Transducer and 2.5” VC, Should have 1.35” HF Driver or better and frequency response (+/-3 dB) 80 Hz to 16 Khz nominal coverage pattern (H x V) 90˚ x 60˚, power handling Program power output should be 600 Watt to 1200 watt or better, Impedance 8Ω, Frequency range (-10dB), 70 Hz to 16Khz. power handling long term continous 300 W, sensitivity 94 db free field, 127 db wall / ceiling etc.complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make:Electro-Voice / D&B Audiotechnica / L-Acoustics

SITC of Front Fills Passive speakers with having Trapezoidal Design, Transducer must be 2 x 6.5” woofer + 1.35” TWT or better, Frequency response must be between 70 Hz to 18 kHz or better with Max SPL of 116dB, Continous power handling must be 400Watts or better, Sensitivity should be 93 dB @ 1m/1W or better, Should have Dispersion (H x V) angle of 120° x 60°. complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make: Electro-Voice / D&B Audiotechnica / L-Acoustics

SITC of Active Stage Monitors with 2 way Coaxial Drivers & 3 Tone controls, it should have 15 "LF Transducer + 1.34" twt coaxial speaker or better, amplifier power must be 400Watts or better, Max SPL should be 124dB or better, Should have frequency response of 70 Hz to 20 kHz or better, Sensitivity must be 96dB or better. complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make:Electro-Voice / D&B Audiotechnica / L-Acoustics

SITC of Passive Subwoofer with 2 x 18" Woofers or better, with Direct Radiating design (Bass Reflex), powered subwoofer 500 W long-term power handling for high sound output and reliability power handling, Power handling of 2400 Watts or better, Frequency response of 36 Hz to 250Hz or better, deep - bass music reinforcement 123 dB maximum continuous SPL, 129 dB peak SPL Exterior -grade plywood enclosure with compact size for installations with 4 Ohms Impedance, Should have Max SPL of 136dB or better, Sensitivity should be 103dB (1W/1m) or better. complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make:Electro-Voice / D&B Audiotechnica / L-Acoustics

SITC of Amplifier for FOH and Delay with having Switching power, Class D output circuitry or better, Should have output power of 2 x 500Watts at 8 Ohms and 2 x 850Watts at 4 ohms or better, Frequency response should be 20Hz to 20kHz(+0/-1dB) @ 1W or better Gain (Low - Z mode), Channel separation (Crosstalk) > 80 dB @ 1 Khz Dynamic range > 100 dBA (at rated power), audio latency < 1 ms (any analog or Amp link imput to loudspeaker output), AUDIO INPUTS ANALOG AMPLINK, Input channels 2 balanced, 8 digital, connectors 6 pin euroblock, RJ-45 (input) input impedance 10 K ohm, Maximum input level 22 dBu, Audio outputs Speaker AMPLINK, outputs 2, 8 digital, connectors 4 terminal block RJ-45 (Thru) indicators and controls power LED, Solid white : power is on. blinking white : unit is in auto standby mode. ELECTRICAL, Mains voltage, 100 VAC-240 VAC(±10%, 50/60 hZ) AC poer consumption 120 VAC : 25W (Auto-standby), 950 W (Max) 230 VAC : 25 W (Auto-standby), 950 W (max), Mains connector, standard IEC (C14), protections, Vpeak/Vrms limiters, high temperature, output short, extra high frequency (EHF), excessively low or high AC line voltage, PHysical operational temperature range 0˚C to 40˚C, Damping factor must be >500 or better, Should have refrigeration Air flowing from Front to rear, Should have the following protections of Soft start, VHF,DC, Overload, Clip limit, Short circuit, Overheat, progressive volume or better. Make: Dynacord / D&B Audiotechnica / L-Acoustics

SITC of Amplifier for Frontfills with having Switching power, Class D output circuitry or better, Should have output power of 2 x 300Watts at 8 Ohms and 2 x 500Watts at 4 ohms or better, Frequency response should be 20Hz to 20kHz(+0/-1dB) or better, Damping factor must be >500 or better, Should have refrigeration Air flowing from Front to rear, Should have the following protections of Soft start, VHF,DC, Overload, Clip limit, Short circuit, Overheat, progressive volume or better. complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make:Dynacord / D&B Audiotechnica / L-Acoustics

SITC of Amplifier for Subwoofer with having Switching power, Class D output circuitry or better, Should have output power of 2 x 1000Watts at 8 Ohms and 2 x 1700Watts at 4 ohms or better, Frequency response should be 20Hz to 20kHz(+0/-1dB) or better, Damping factor must be >500 or better and works seamlessly with loudsepakers, DSPs, and constrols to create complete commercial sound system,Load independent outputs deliver full channel power to either low=impedance loads (4-8 ohm) or high impedance loads without bridging, I- share outputs deliver 2x power level by combining the current of two channels, auto standby mode saves power when audio signal falls below a set threshold, then wakes when audio returns as per specifications Should have refrigeration Air flowing from Front to rear, Should have the following protections of Soft start, VHF,DC, Overload, Clip limit, Short circuit, Overheat, progressive volume or better. complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make:Dynacord / D&B Audiotechnica / L-Acoustics

SITC of 24 Channel mixing console, GENERAL Computer Interface In2, Computer Interface Out2, MIXER Channels Qty (for SD)22-channel Frequency Response10 Hz - 200 kHz, Mic Phantom Power48 V Control Typesfaders, knobs, Headphones OutputYes, Meter Indicator2 x LED level meters (12 segments), Featuresbuilt-in channel compressors, headphone output volume control, switchable Low Cut input filters, CHANNEL DESCRIPTION, Mic Channels8 mono, Mic Channels ConnectorXLR, Line Channels8 mono / 4 stereo, Line Channels, Connectorphone 6.3 mm x 2, phone stereo 6.3 mm, Input Gain Level40 dB Mic Preamplifier Gain Level60 dB, EQ Band Qty4, Fader Size60 mm, Master Bus Fader Size60 mm, AUX Channels3x AUX Return, 3x AUX Sends, 8x channel inserts, Control Room Out, EFX Send, Stereo Sub Out,EFFECT PROCESSOR, Effects Qty32, Effects TypeAmbience, Delay, Detune, Large Hall, Modulation, Pitch Shift, Reverb, Small Room, Resolution24-bit etc. complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make: Behringer / Dynacord / Electro Voice

SITC of UHF Wireless Mic with Handheld Mic UHF Receiver Audio output (Nominal):Balenced: 0 dbu Unbalenced: -10 dbu. S/N Ratio : 100db. Distortion : )90db. Controls : On/off switch, Volume control for Channel A and B. Indications : LED’s for RF and Audio signal Channel frequency display. UHF Handheld Transmitter RF Output Power : 10mW (Max). Carrier Frequency Range : 600-699MHZ. Frequency Stability : plus 0.005%. Microphone Element : Dynamic, Cardioid. Frequency Response : 50-15,000HZ. Power Requirement : 3V (2 × 1.5V AA Pencil Cells). Current Consumption : ( 150mA. Controls : POWER ON/OFF switch. Indication : Channel Frequency Display. Body Pack Transmitter RF Output Power : 10mW (Max). Carrier Frequency Range : 600-699MHZ. Frequency Stability : plus 0.005%. Microphone Element : Dynamic, Cardioid. Frequency Response : 50-15,000HZ. Power Requirement : 3V (2 × 1.5V AA Pencil Cells). Current Consumption : ( 150mA. Controls : POWER ON/OFF switch. Indication : Channel Frequency Display. Makes -Behringer / Dynacord / Electro Voice

SITC of Wired Handheld Microphone with having Dynamic Moving Coil element or better, Should have Hyper Cardioid polar pattern or better, Frequency response should be 50 hz to 16 Khz or better, Sensitivity - 71dB ± 3dB (0dB = 1V / Pa at 1kHz) or better.. complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make: Behringer / Dynacord / Electro Voice

SITC of 42U Equipment Rack with provision for housing all control equipment with front & rear door, Blower for cooling and proper locking arrangements and as per the specifications, complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make:- HCL /Comrack/Ritall/Hive Network

SITC of DVD Player etc. complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make: Sony / Samsung / Philips

SITC of Microphone cable complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make: Krystals / Havells / Kramer

SITC of 2 core speaker cable, 2.5mm complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make: Krystals / Havells / Kramer

SITC of 25 mm PVC Conduit or channel, complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. (As per HSR 2021 items no. 23.7.6.2)

SITC of Digital Signal processor with 8 AEC enabled Mic/Line inputs and 8 Line outputs or better, Should have USB for Playing Digital audio, Should have the following processing parameters of Automatic Noise Supperession (ANS), Automatic Gain Control (AGC), Automatic Mixture Control (AMC), Automatic Feedback Suppressor (AFS), Acoustic Echo Cancellation (AEC) Parametric Equilizer (PeQs), Compressor, Limiter, Ducker or better. Should have 8 Port GPIO or better, Audio Format Must be 24 bits, 48 kHz sampling rates (uncompressed) or better, Should have Analog Dynamic range of 113 dB or better, Should have Analog Input Level of +24 dBu or better, Should have 14 or more presets options, Should be configurable through software, Should support windows and MAC OS complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Dynacord / D&B Audiotechnica / Solvision

SITC Wired Gooseneck Microphone with Electret Condencer Elements or better, Polar pattern must be Linear + gradient or better, Should have Interference tube to increase directivity at higher frequencies with Low feedback level or better, Frequency response must be between 50 Hz to 18 kHz or better, Output Impedance must be 250 Ω ±30% or better, Max SPL of 125dB or better, Dynamic Range of 105dB or better, Sensitivity must be -45dB ±3dB Pa or better complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make: Behringer / Dynacord / Electro Voice

SITC of HDMI Audio De-Embedder with 3D Support Resolution Video 480i, 480p, 576i, 576p, 720p@50/60Hz, 1080i@50/60Hz, 1080p@24/50/60HzMVESA640×480, 800×600, 1024×768, 1280×1024, 1360×768, 1600×1200, 1920×1200 ColorspaceMYCbCr 4: Audio Formats PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio Bit depth pass through support of up to 24-bit Sample Rate 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz THD+N -95db4:4, xvYCC Color depth pass through support of 24-bit Signal Bandwidth 6.75 Gbps CEC Yes HDCP Compliant complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. MAKE Solvision / Kramer / Alton

SITC of Cat-6 in the existing conduits complete with all civil and labour charges as per site requirement upto the entire satisfaction of Engineer-in-Charge (As per HSR 2021 item no. 23.23.9)

SITC of 32 mm PVC Conduit or channel, complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. (As per HSR 2021 items no. 23.7.6.3)

CYCLORAMA CUM SCREEN/DACK DROP :- SITC Providing and fixing cyclorama screen in plastic perforated material. The screen to be fixed on tubular frame made out of 35mm dia MS pipe. Appx. Size:- 11000mm x 5000mm complete with all civil and labour charges as per site requirement upto the entire satisfaction of Engineer-in-Charge Make: NEW STAGE CRAFT/LEKSA

Light Bars & Wiring: SITC of MS pipe Lighting Bar (fixed): to be provided at ON STAGE - to be fixed from the existing main structure Girder / Grid / Beams / Ceiling, ; approx. size 12m x 50mm dia B-class,MS PIPE supported by A.I. brackets ; duly painted black complete with all civil and labour charges as per site requirement upto the entire satisfaction of Engineer-in-Charge Make: Spinoff/ NSC / LEKSA

SITC of MS pipe Lighting Bar (fixed): to be provided at FOH position - to be fixed from the existing main structure Girder / Grid / Beams / Ceiling, with extra angle frame fabricated and installed as per site requirement ; approx. size 12m x 50mm dia B-class,MS PIPE supported by A.I. brackets ; duly painted black complete with all civil and labour charges as per site requirement upto the entire satisfaction of Engineer-in-Charge Make: Spinoff/ NSC/LEKSA

SITC of WIRING for DMX Points: using .07 sqmm GREESH FR wire with common xlr . Make: Havells / Polycab / RR Kabel

SITC of WIRING for DIRECT Points: using 1.5 sqmm 2 wire with common neutral & earth for 2 sockets starting from the patch panel (side of stage) to the Lighting bars/tree or stage points ; terminated at junction box with 2 x 3- pin CEE 16 Amp. Industrial sockets ; cabling laid in PVC conduits .STAGE TO STAGE

DMX & Controls: SITC of Pearl-2010 DMX Lighting Desk : 240 Intelligent Fixtures + 240 Dimmer Channels ; 512 Channels ; Load and Save shows with USB ; Theatrical Plotting & Playback functions ; Shape Generator ; 15 Playback Masters controlling 450 memories, chases or cue lists MIDI and Sound to Light triggers ; VGA output ; supplied with LEd lamp Make: Spinoff/ LEKSA / NSC

SITC of DMX Data Splitter: 1 x IN to 8 x OUTPUT DMX-512 Data Splitter Unit, suitable both for Dimmer & Intelligent Lights Make: Spinoff/ NSC/LEKSA

SITC of Inter connection - DMX Data patch cables, for interlinking Intelligent Lighting Fix complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make: Spinoff / Belden / Krystals

Lighting Fixtures: SITC of LED 'ELF' PAR, RGBW: 180w Pro-series using 60x 3w -1 LEDs ; Powercon connectors for IN & OUT ; DMX-512 signal, 6/9 DMX Channels ; Beam Angle 30 degrees Al. die-cast housing ; s/w suitable clamp complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make: Spinoff/ NSC/LEKSA

SITC of LED PAR with Lamp : 200W warm white COB LED, (50,000 hrs), Voltage: AC90-260V 50/60Hz, Power consumption: 250W, Dimmer: 0100% electronic dimming, High speed strobe effect with 4 default strobe modes and speed adjustable, Hight light output with pure and even coverage, Light angle: 60°(8083A/ B/C/D), 120°(8083K/L), Control: DMX512, master-slave and sound activated or auto operation, Channels: 3/5/7(8083A), 5(8083D),3(8083B/C/L), 5/7/8(8083K)DMX channels USITT DMX-512, LED display, Low noise and efficient etc as required complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make: Spinoff/ NSC/LEKSA

Supply, Installation, Testing & Commissioning of LED profile 200w 36* voltage0-90-250v/50-60hz,working position: Any safe working position ,lamp: super high power LEDs; white 180w (cool white or warm white) average life time is over 5000h,CRI:>90,Lens angle :19*/26*/36*,optinal, LED display channel-2 ch,IP rate :IP 20 indor, speacial zoom funcation with manual adjustment, control mode: master /slave synchronization,DMX 512 control and automatic, run, construction: die-casting aluminum housing silver white and black,optinal of complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make: Spinoff/ NSC/LEKSA

SITC of LED 'COB' WASH LIGHT for CYCLORAMA: using 60Nos.x 3w Hi-Power 3-in-1 LEDs : IP-65 rated ; Power AC 240V / 50Hz 190W ; Lamp Life: >50000 hours ; Beam Angle: 60°; 0-100% electronic linear Dimmer, 1-10 times/sec strobe; DMX-512 signal, 6 DMX Channels ; Al.die-cast housing ; s/w Power & DMX data link cables; 4-leaf Barndoors & suitable clamp. Make: NSC/LEKSA/Spinoff/

SITC of LED SPOT 200 Moving Head : using 200W single white LED lamp ; 12° to 36° linear motorized zoom ; rotatable gobo wheel (7 gobos plus open) ; static gobo wheel (9 gobos plus open) ; color wheel (7 colors plus open) ; motorized linear IRIS ; 3-facet rotating prism ; variable frost filter ; motorized linear focus ; 0-100% linear LED dimmer ; variable speed shutter/strobe ; Control Channel: 15 / 17 DMX channels ; Power Consumption: 300W complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make: NSC / LEKSA/ Spinoff

SITC of customized MCB Box for 12 way with 100amp Isolator, Power indicator bus bar, volt meter,20amp MCB. complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make : Legrand (Laxic)/ L&T (Exora)/ Crabtree (Xpro)/

SITC of Light Clamps for suspending above lights from Light Bar, Black Power Coated complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make: NSC / LEKSA/ Spinoff

AVNET Solutions (BID ID -1265237)