Annual repair and maintenance of Type III Type II and type I qtrs at ITI Colony Solan

Amount

Providing and laying 20mm ( twenty milimeter ) thick granite stone in flooring 20mm (twenty milimeter ) (average) thickness base of cement mortar 1:3 ( one cement isto three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete as per HPPWD specification including carriage of all equipments and labour to various locations through all modes of transportation in all leads and lifts as per direction of engineer in charge.

Providing Sal wood work in frames of false celling partitions etc. sawn and put-up in position as per H.P. PWD. Spesification including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 18 (Eighteen ) millimeters thick water proof commercial board with hard wood edging in shelves/box of cup boards with hard wood edging on exposed surface including nickel plated piano hinges with necessary screws complete as per drawing and direction of the Engineer-in-Charge and H.P.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 25 mm thick flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws ISI marked as per H.P.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 50x12 mm (fifty into twelve millimeter ) 2nd class teak wooden moulded beading to door and window frames with iron screws,plugs and primingcoat on unexposed surface etc.complete as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing Second class teak wood 35 mm thick shutters panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. (Note:- Butt hinges and necessary screws shall be paid separately as per HP.PWD specification including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing mild steel Tower bolts (barrel type) anodized transparent or dyed to required shade and color with screws etc. Complete as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

200*10 ( two Hundred Fifty into Ten) millimeters size

150*10 (One Hundred Fifty into Ten) millimeters size

Providing and fixing bright finished brass handles with screws etc. as per HP.PWD specification including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

125 mm (one hundred twenty five melimeter)

100 mm (one hundred melimeter)

Providing and fixing anodized aluminum Sliding Door Bolts 300*16 (Three hundred* Sixteen) millimeters size anodized transparent or dyed to required shade and color with screws etc. Complete as per direction of Engineer in Charge as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Supplying and fixing 4 mm ( four) milimeter thick plain glass panes with putty and nails including removal of glass panes wherever necessary as per direction of Engineer in Charge and as per HP.PWD. Specification including carriage of all labour, equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and laying virified floor tiles 5.5mm (five point five milimeters) thick in flooring (600x600mm) (three hundred into three hundred milimeters) size} treads of steps laid on a bed of 20mm (twenty milimeters) thick cement mortar 1:4 (1cement:4 sand) finished with flush pointing in white cement as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete as per HP.PWD. Specification and as per direction of Engineer in Charg including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 2 (two)mm thick PVC antistatic venyl Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately) as per direction of Engineer-in-Charge, and HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing insulating 12 mm thick natural colour insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) as per direction of Engineer-in-Charge, and HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per direction of Engineer in Charge and as per HP.PWD. Specification including carriage of all labour, equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete as per HP.PWD. Specification 1including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts.

Distempering two coat with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour as per direction of Engineer-in-Charge, and HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Painting two or more coats on old work with synthetic enamel paint on new wood and wood based surface with ready mixed paint, brushing to give an even shade including cleaning all dirt, dust and other foreign matter, sand papering and stopping as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges and as per direction of engineer in charge.

Repairs to plaster in patches of 2.50 sqm. (two point five zero square meter ) and under and 10 to 15mm (ten to fifteen millimeter) thick with cement mortatr 1:4 (one cement is to four sand) including cutting the patches in proper shape and re-plastering the surface of the wall including disposal of rubbish to the dumping ground within all lead as per direction of Engineer-in-Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required as per HP.PWD specification including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges.

Providing and fixing White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 32mm (thirty two milimeters) dia C.P. Brass waste for wash basin or sink as per HP.PWD specification including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges.

Providing and fixing Stainless steel Kitchen sink with drain board 610 x460 mm with bowl depth 200 mm as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 10 (ten) litre capacity (White) P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, Cera, Hindware or equelent make with all fittings and fixtures complete as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing White solid plastic seat with lid for pedestal type W.C. pan complete as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 32 mm (thirty milimeters) dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing 100 mm sand cast Iron grating for gully trap as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing 600mmx450mm (six hundred into four hundred fifty milimeter) beveled edge mirror of superior glass mounted on 6mm(six milimeters thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers as per HP.PWD specification including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing 15mm (fifteen milimeter nominal bore) to wall ceiling and floor galvanized mild steel tubes (Medium grade) including tube fittings and clamps, also including making good the wall ceiling and floor as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts.

Providing and fixing 15mm nominal bore brass ball valve (horizontal plunger type) High pressure with polythene plastic floats complete in all respect as per HP.PWD specification including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges.

Providing and fixing 15 mm (fifteen milimeters) nominal bore uplasticised PVC connection pipe 45 cm length with brass unions as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 15 mm (fifteen milimeters) nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 15 mm (fifteen milimeters) nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 15 mm (fifteen milimeters) nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 15mm (fifteen milimeters) nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete as per HP.PWD specification including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges.

110 mm (one hundred ten milimeters)dia.

90 mm (ninety milimeters)dia.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3mm(three milimeter) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete:- as per HP.PWD specification including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

110mm(one hundred ten milimeter)

90 mm (ninety milimeters)dia.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete:- as per HP.PWD specification including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

110 mm (one hundred ten milimeter) dia.

90 mm (ninety milimeters)dia.

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete to wall ceiling and floor as per HP.PWD specification including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges.

110 mm (one hundred ten milimeters)dia

75 mm (seventy five milimeters)dia.

Ram Prakash Contractor

ANKUSH THAKUR

Prateek Sonkhla

Hem Raj