Loading
Loading…
Loading…
Tender Value
₹70.5 L
EMD Value
₹1.4 L
Closing Date
6 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
Above/Below/Par
HQ OFFICE
15 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less ; where V= Advertised value of the tender in crores of Rupees & N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.(Please refer para 10.2 of tender document)
The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.(Please refer para 10.1 of tender document)
Defination of Similar Work :- Any work involving- (a) Construction of bridges including RCC/PSC/Composite; or (b) Any Rehabilitation work of Bridges.
**Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.
9 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
For Schedule of Work, Scope of Work, Special Conditions, Methodology etc. please refer tender document.
All the bidders/tenderers must ensure that they are GST compliant and their quoted tax structures / rates are GST Law.
Epoxy based painting and repairs of PSC Bridges, Br. No. 33/2 & 33/3 in TNA-VSH section of Mumbai division.
CR-BR342025-26
CR-BR342025-26
Open
Works - General
6 Months
Mumbai, Maharashtra
₹0
₹1.4 L
6 Mar 2026
11 Feb 2026
20 Feb 2026
30 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 50,98,537.92 | ||
| — | 6500.00 | — | — | ||
| Providing protective coating to exposed concrete face of bridge as per CECRI, Karaikudi - integrated 4 coat system having 1st cost of micaceous iron oxide under coat, second coat polyimide primer, third coat of polyimide finish coat and last coat of aliphatic acrylicpolyurethane finish coat (Bergerthane or similar paint) as per detailed specification attached. | — | — | — | 27,11,780.5 | |
| — | 550.00 | — | — | ||
| Strengthening structural elements with non metallic composite fibre wrapping system comprise of unidirectional carbon fibre sheet(430 GSM) and compatible aturant by wet lay up system including surface preparation (Grinding/moulding concrete substrate ,cleaning it with wire brush,removing oils,laitance if present, rounding sharp edges to min 25 mm radius ) etc complete including profiling, applying compatible primeron prepared substrate, filling the holes and uneven surface with thixotropic putty etc. complete, Mechanized wetting of fibre sheet , cutting the fabric to required size, mixing of saturant and filling in tub area of the saturation machine . placing the fibre on metallic rods and pass through the rollers of machine and saturant tub ensuring complete wetting(65% fibre volume fraction) of fibres. Remove the fibre on road and place the new fibre sheet. Wrapping the fibre sheet to structural element at desired orientation using tamping roller to avoid any air voids etc. repeat the same procedure for multiple layer with the interval of 8 hrs. second coat: Applying second coat of saturant after min 12 hrs., rectify air voids if any( mode of measurements: per sq mt of carbon fibre sheet consumed and not the surface area of application.) | — | — | — | 20,23,202.21 | |
| — | 420.00 | — | — | ||
| Injecting low viscocity(3-5 cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till nozzle refuses to accept the grout including mixing of materials (mixing material component(part A&B) in required quantities as per manufacturer instruction by weight batching) and grouting(filling the grouting gun with monomer maintain desired pressure in the gun by air comressor) maintain the pressure at exit (4 to 5 kg per cm2)by monitoring pressure gauge at exit grouting the material through prefix nozzle in the structural element till its refusal. sealing the nozzle with epoxy putty after the refusal, monitoring leakages through other nozzle while grouting and seal as per the requirement. repeat the process for all the nozzle. The operation to be within pot life of the material and cleaning of gun & accessories.(The gun & accessories likes valves pipes & other fixtures to be cleaned with thinner after the operation to avoid jamming of the gun) etc complete. | — | — | — | 3,63,555.21 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
34-epoxypaintTNA-VSA.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .