PROVN OF TOILET FACILITIES FOR WOMEN AT WORKPLACE AT AIR FORCE STATION PATHANKOT

Amount

Surface dressing n exc 15 cement mortar deep and and getting out in any type of soil complete all as specified and as directed by Engr-in-Charge

Excavating in trenches not exceeding 1.5 m wide and n exc 1.5 m depth and getting out in any type of soil complete all as specified and as directed by Engr-in-Charge

PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in mass filling in foundation and flooring complete all as specified and as directed by Engr-in-Charge

Material & Labour for Reinforced cement concrete (Design mix) M-25 using 20mm graded crushed stone aggregate as in foundation footing,plinth beams etc complete all as specified and as directed by Engr-in-Charge

Use and waste of formwork to rough finished sides of concrete foundation,footing, bases of column, rafts, rafts beams & side & side of foundation and plinth beam and semilar verical battle complete all as specified and as directed by Engr-in-Charge

Material & Labour RCC- M25 (Design Mix) using 20mm graded crushed stone aggregate for Column complete all as specified and as directed by Engr-in-Charge

Form work for fair finished surfaces of concrete measured flat for Column complete all as specified and as directed by Engr-in-Charge

Material & Labour RCC- M25(Design Mix) using 20mm graded crushed stone aggregate for roof beam ,slabs, and lintel chajja etc complete all as specified and as directed by Engr-in-Charge

Form work for fair finished surfaces of concrete measured flat for roof Beam ,lintel chajja etc complete all as specified and as directed by Engr-in-Charge

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed by Engr-in-Charge

Material & Labour for Mild steel bars 10mm dia and over, cut to length, bent to shape required, includinguding cranking, bending spirally for hooping for columns, hooking ends and binding with and includinguding mild steel wire (annealed) not less than 0.9mm dia or securing with clips (footing & column upto NGL) complete all as specified and as directed by Engr-in-Charge

All as per Srl item No 11 above but 5 to 10mm dia in stirrups, spacers & binders. complete all as specified and as directed by Engr-in-Charge

Material & Labour Plain cement concrete 1:2:4 Type B1 using (20mm graded crushed stone aggregate ) in coping,plinth courses parapet railing and cill etc including weathering ,slightly rounded or charmferred angle necessary form work complete all as specified and as directed by Engr-in-Charge

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed by Engr-in-Charge

Returning filling includinguding spreading, levelling, watering and well ramming in layers and not exceeding 25cement mortar complete all as specified and as directed by Engr-in-Charge

Material & Labour for brick work with fly ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engr-in-Charge

Material & Labour for brick work with fly ash bricks straight or curved on plan to any radius half brick wall built in cement mortar (1:4) complete all as specified and as directed by Engr-in-Charge

Rendering 15 mm thick in cement mortar 1:6, on brick or concrete surfaces, trowelled to even and smooth finish without using extra cement complete all as specified and as directed by Engr-in-Charge

Material & Labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finishing even and smooth without using extra cement with water proofing compound complete all as specified and as directed by Engr-in-Charge

Supply only liquid integral water proofing compound complete all as specified and as directed by Engr-in-Charge

Material & Labour for rendering 5mm thick in cement mortar 1:3 as on ceiling surfaces complete all as specified and as directed by Engr-in-Charge

Material & Labour for preparation of new plastered surfaces of Wall and applying three coats of white wash on ceiling complete all as specified and as directed by Engr-in-Charge

Material & Labour for preparation of new plastered surfaces of Wall and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed by Engr-in-Charge

Material & Labour for preparation of new plastered surfaces of Wall and applying two coats of weather proof exterior emulsion paint over a coat of primer complete all as specified and as directed by Engr-in-Charge

Supply & Fixing Supply and fixing factory made uPVC coloured profile fixed or casement glazed window/ventilator made of (small series)frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVcement mortarulti-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded includinguding drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. includinguding 6 mm thick glass pane etc complete all as specified and directed by Engineer-in- Charge Note:- The rate shall also included making all damages/plastering repair, leveling and making good in plumb all the cills and jambs of opening before fixing ventelators and , shall deemed to have been included in the quoted rate and no extra shall be admitted at a later date in this respect.

Supply & Fixing Pressed steel frames of size 105 mmx 60 mm for door with one or more rebates includinguding necessary fixing lugs, hinges, lock strikes plate,etc, complete all as specified and directed.

Material & Labour for Cement concrete 1:3:6 Type C1 as in pressed steel frames and fixing hold fasts complete all as specified and as directed by Engr-in-Charge

Supply & Fixing Factory made single extruded WPC (Wood PolymerComposite) UV coated solid plain flush door shutter of 32 to 35mm thick size comprising of virgin polymer of K value 58-60.(Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screwwithdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixingwith stainless steel butt hinges of required size with necessary full body threaded star headed counter sunkS.S screws, in kitchen cupboards and room wardrobes shutter complete all as specified and as directed by Engr-in-Charge

Supply & Fixing 125 mm butt hinges, medium weight complete all as specified and as directed by Engr-in-Charge

Supply & Fixing 100 mm butt hinges, medium weight,cold rolled mild steel complete all as specified and as directed by Engr-in-Charge

Supply & Fixing 300 mm aluminium alloy sliding door bolts with hasp staple (Bolt type ) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium complete all as specified and as directed by Engr-in-Charge

Supply & Fixing 200 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engr-in-Charge

Supply & Fixing 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring , fixed in floor complete all as specified and as directed by Engr-in-Charge

Supply & Fixing for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing etc.complete all as specified and directed by Engr-in-Charge.

Supply & Fixing for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement,complete all as specified and directed by Engr-in-Charge.

Preparing new steel surfaces of any description exc. 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete complete all as specified and as directed by Engr-in-Charge

Supply & Fixing GI Tubes, `medium grade' with all fitting and fixed complete to wall and ceiling or laid in floors of 20 mm bore steel tubing & connections complete all as specified and as directed by Engr-in-Charge

Supply & Fixing GI Tubes, `medium grade' with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bone and connection complete all as specified and as directed by Engr-in-Charge

Supply & Fixing rotational moulded polyethylene triple layer water storage tanks of capacity 500 ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed by Engr-in-Charge

Supply & Fixing Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed by Engr-in-Charge

Supply & Fixing Gun-metal, globe or gate valves,of 20 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge

Supply & Fixing vitreous china wash down water closet pan (pedestal pattern) white, with 'P' or 'S' trap (excluding flushing cistern and flush pipe) including seat cover and connection to drain and to flushing pipe complete including making good to floor to match with adjoining surface complete all as specified and directed by Engr-in-Charge.

Supply and Fixing 10 ltrs discharge capacity valueless symphonic action type, PVC low level flushing cistern, with inlet, ball valve, float, PVC flush pipe of 32mm dia and handle complete all as specified and directed by Engr-in-Charge.

Supply and fixings vitreous china fancy type pedestal patteren WHB,white of size 550 mm x 400 mm with a necessary fittings including chromium plated brass waste coupling 32mm dia and waste pipe, complete all as specified and as directed by Engr-in-Charge

Supply and Fixing 75 mm dia PVC (SWR), floor trap with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

Supply & Fixing health facet, cast copper alloy chromium plated body with PVC braided pipe of standard length complete all as specified and as directed by Engr-in-Charge

Supply and fixing 15mm dia Bib Taps, CP fancy type with crutch or butter fly handle screwed down pipe or for screwed iron pipe complete all as specified and as directed by Engr-in-Charge

Supply and fixing 15mm dia CP angle/stop cock cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and as directed by Engr-in-Charge

Supply and fixing pillar taps, 15mm bore cast copper alloy with capstern head, chromium plated screwed down high pressure with or without lettered hot or cold complete all as specified and as directed by Engr-in-Charge

Supply & Fixing Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long complete all as specified and directed by Engr-in-Charge.

Supply and Fixing 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge.

Supply and Fixing 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge.

Supply and Fixing 110mm bore, PVC (SWR), bends of any radius complete all as specified and directed by Engr-in-Charge.

Supply and Fixing 110mm bore, PVC (SWR), bends with access door of any radius complete all as specified and directed by Engr-in-Charge.

Supply and Fixing 75mm bore, PVC (SWR), bends with or without access door of any radius complete all as specified and directed by Engr-in-Charge.

Supply and Fixing 75mm bore, PVC (SWR), bends with access door of any radius complete all as specified and directed by Engr-in-Charge.

Supply and Fixing 110mm dia, PVC (SWR), Vent cowl complete all as specified and as directed by Engr-in-Charge

Supply & Fixing Soap dish any type, fixed to plugs with chromium plated brass complete all as specified and as directed by Engr-in-Charge

Supply & Fixing toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed by Engr-in-Charge

Supply & Fixing PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed by Engr-in-Charge

Material & Labour for hardcore of gauge n.exc. 63 mm, deposited, spread and levelled in layers n.exc. 15 cement mortar thick, watered and rammed to a true surface using broken stones or boulders, complete all as specified and as directed by Engr-in-Charge

Material & Labour 100 mm thick PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in sub base, complete all as specified and as directed by Engr-in-Charge.

Material & Labour for 75mm thick PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in plinth protection etc finished cement concrete surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge

Material & Labour for Anti-termite treatment for treating the backfill of column in the contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface complete all as specified and as directed by Engr-in-Charge

Material & Labour Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed by Engr-in-Charge

Material & Labour for Anti-termite treatment for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed by Engr-in-Charge

Material and Labour for bed to drain pipes including packing under, and hunching in PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate against the side of SGSW/RCC pipes after they are laid and tested for 150mm dia bore pipe complete all as specified and directed by Engr-in-charge.

Material and Labour for salt glazed stone ware pipe of 150mm internal dia, grade 'A' laid in trenches and jointed with neat cement, complete all as specified and directed by Engr-in-Charge

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required all complete all as specified and directed by Engr-in-charge.

Material & Labour for providing pre-cast cement concrete landing, cover slabs for manholes, chullah hoods, chajjas, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded crushed stone aggregate and setting in cement mortar 1:6 includingnecessary form work complete all as specified and as directed by Engr-in-Charge

Material & Labour glazed ceramic coloured/printed tiles 600x300x 6 to 7mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and includinguding 10mm thick bedding layer in cement mortar (1:4) includinguding necessary cutting as per site requirement complete all as specified and directed by Engineer-in-Charge.

Material and Labour non-skid coloured joint free ceramic tiles 7 to 8 mm thick (square or rectangular) area of each tile exe 0.11 Sqm but n.exe 0.18 Sqm, laid in floors set and jointed with neat cement slurry including15 mm screed bed in cement mortar 1:4 , over 25 mm thick PCC 1:2:4 type B0pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed by Engr-in-charge.

Material & Labour for surface dressing n. exc.15 cement mortar deep in any type of soil, complete all as specified and as directed by Engr-in-Charge

Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed by Engr-in-Charge

Material & Labour 75 mm thick PCC 1:4:8 type D-2 using 40 mm crushed stone graded aggregate as in sub base,complete all as specified and as directed by Engr-in-Charge

Material & Labour Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and as directed by Engr-in-Charge

Material & Labour Plain cement concrete 1:2:4 Type B1 using (20mm graded crushed stone aggregate ) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed by Engr-in-Charge

Providing pre cast cement concrete 1:2:4 Type B0 using (12.5 mm graded crushed stone aggregate ) for louvres and jallies of 25mm thick set cement mortar 1:4 includinguding all mouldings and frame complete all as specified and as directed by Engr-in-Charge

Material & Labour for remove all loose gravel cement mortar , dirt, oil, grease and foreign material by jet of dry air and clean the surface mechanically or by grinding to make it smooth before application loose existing bituminious material manually and with heat torch gun to get smooth plain finished surface with no loose material on surface . Repair all joints& cracks with Highly elastic Bituminous cold applied putty --Tarplasic having penetration after setting upto 8mm . Leveling of Surface to give proper Slope will be done as per site requirements with Shalipatch cold applied ,Bituminous Mortar & Cold Emulsion cum Waterproofing Liquid --Shalikote -T-10. Create SSD condition on Surface with Water. Prime the surface with Tarfelt LM mixed with potable water in the ratio of 1 : 1 and apply @ 400 grm per Sqm ( As per Surface Conditions ) • Apply first coat of Tarfelt LM having elongation 200% conforming to ASTM -C -412& having crack bridging of .8mm confirming to ASTM -C -836 with Tensile strength after 7 Days 0.50 mm conforming to ASTM-C-412 with no diluation of water on primed surface while the surface is still tacky with consumption of 700 gram per Sqm .Lay Geotex of 45 GSM /Fibre mesh simultaneously and paste it properly with overlap of 50mm .Allow the first coat to dry for 10 to 12 Hrs . • Apply 2nd coat on cured first coat with consumption @ 700 gram per Sqm in oppsite direction of first coat by Brush or Roller Allow it to dry for 10 – 12 hr after apply 3rd coat with consumption @ 700 gram per Sqm . • Ensure final curing time of 36 hrs before allowing / carrying out any further work. Conduct Ponding test after min.7 Day Applying two coats of U.V Resistant Elastomeric Exterior Axcrylic Weather resistantwaterproof coating --Shalicryl-215---Having Elongation of 300 % after curing of 14 Days confirming to ASTM D-6083-- for U.V protection of Bituminous Elastomeric Acrylic Emulsified Liquid Membrane --Tarfelt LM to give long life & prevent its deterioration from Sunlight after applying finishing coat camouflage colour paint applier over top layer. Note : Application of water proofing treatment will be done by Authorised Applicator only .

Sand cushioning to the under ground electric cable complete all as specified and as directed by Engr-in-Charge

Material & Labour Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable on sand cushioning with width equal to length of brick complete all as specified nd as directed by Engr-in-Charge

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core complete all as specified and as directed by Engr-in-Charge

Supply & Fixing GI tubing, medium grade 40 mm bore with and includinguding all fitting and fixtures laid in trenches complete all as specified and as directed by Engr-in-Charge

Material and labour for point wiring with two single core 1.5 sqmm cable (nominal area) stranded copper conductor, PVC insulated unsheathed cable, 1100 V grade in and includinguding concealed PVC conduit of size not less than 20mm dia with sunken type pressed steel terninal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes and wiring to be terminated in pressed steel sunken boxes including all accessories(Modular type) and using single core 1.5 Sqmm (nominal area) stranded copper conductor, PVC insulated unsheathed cable as in earth wire (green colour) connected to common earth dolly complete all as specified and directed for following :- (a) One light point controlled by one switch.

(b) One 3 pin switch socket outlet point 5 Amps on independent board.

Material & Labour Modular switch 1 way 6A, 1 module, complete all as specified and as directed by Engr-in-Charge

Supply & Fixing Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed by Engr-in-Charge

Supply & Fixingix ceiling rose surface backlite 65x50mm 3 terminals complete all as specified and as directed by Engr-in-Charge

Supply and fixing decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp complete all as specified and as directed by Engr-in-Charge

Supply and fixing LED lights fitting mirror type 1x 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engr-in-Charge

Supply & Fixing LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engr-in-Charge

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant includingg thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engr-in-Charge

Material & Labour for concealed sub main wiring using single core four run PVC insulated, unseathed stranded copper conductor cable of size 2.5 Sqmm of voltage rating upto and includingg 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 2.5 Sqmm (green colour) as earth continuity conductor all as specified and directed. (Note : Three runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit) complete all as specified and as directed by Engr-in-Charge

Supply and fix exhaust fan made of sturdy Engineering plastic Complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed by Engr-in-Charge

Supply and fix sheet metal enclosure distribution board SPN, 4 ways 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed by Engr-in-Charge

Supply and fix MCB single pole, 240 volts, 6 to 32 Amps, all as specified and as directed by Engr-in-Charge

Supply and fix MCB single pole and neutral, 240 volts, 32 Amps, all as specified and as directed by Engr-in-Charge

M/S P.S CONSTRUCTION CO (BID ID -3376971)

new hi tech engineers and contractors (BID ID -3390633)

M/S SINGH AND ASSOCIATES (BID ID -3391386)