85775SPECIAL REPAIR TO BLDG NO.22 (PHYSIOTHERAPY DEPT) AT ALC UNDER GE (SOUTH) PUNE.

Amount

Dismantling floor, hearth or wall tiling incl cement mortar bedding but not backing removing servicable tiles to store and rubbish off the premises.

Demolition of cement concrete in ground foors and paving not exc. 15 cm thick complete all as specified and as directed.

M/L for cement concrete type B-1. 1:2:4 (20 mm graded stone aggregate) of 30 mm thick as in levelling course under ceramic tile flooring etc complete all as specified and as directed.

M&L for joint free double charged digital polished vitrified tile with nano technology of size 600 x 1200 mm tile 10 mm thick in floor etc, set, jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15 mm thick screed bed in CM 1:6 etc complete as in flooring all as specified and directed.

M&L for PCC 1:3:6, type C2 of 75 mm thick as in plinth protection etc complete all as specified and as directed.

M&L for digital glossy finish ceramic glazed tile of size 300 mm x 600 mm and 7 to 8 mm thick but in skirting / dado etc and jointed in neat cement slurry and pointed in coloured / white cement to match with tiles, laid over and including 10 mm thick backing coat in CM (1:4) including triangular filleting in CM 1:4 on top of tiles complete all as specified and as directed.

M&L for joint free non-skid ceramic coloured tiles 7 to 8 mm thick (square/ regtangular), area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm etc.in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match,the shade of tiles laid over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for ceramic glazed tile of size 300 mm x 450 mm and 7 to 8 mm thick but in skirting / dado etc and jointed in neat cement slurry and pointed in coloured / white cement to match with tiles, laid over and including 10 mm thick backing coat in CM (1:4) including triangular filleting in CM 1:4 on top of tiles complete all as specified and as directed.

Taking up or down carefully steel tubing and connections including cleaning for refixing or removal to store of size 15 mm bore.

All as per item No 9 here- in- above but 20 mm bore pipe.

S&F GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc (concealed type) of size 15 mm bore complete all as specified and as directed.

All as per item No 10 here- in- above but 20 mm dia bore pipe complete all as specified and as directed.

M&L for cutting chases, pinning in. making good to facings where required in brick/PCC block wall and pointing in cement mortar (1:3) to ends and cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

S&F sink without drainage board made of stainless steel, 1 mm thick for kitchen or laboratory, with plug, waste pipe, washers and wastes, including bedding in cement mortar on to dwarf walls or including fixing cantilever brackets and connecting union to pipe overall size 550 mm X 460 mm with bowl size 410 mm X 330 mm X 160 mm complete all as specified and as directed.

M&L for Machine cut cudappah stone slab one side polished 30 to 40 mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15 mm screed bed in cement mortar (1:4) . complete all as specified and as directed.

M&L for granite 20-22 mm thick (of any type) work (table rubbed and polished) in steps ,pillar, window cill,shelf and like in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Rounding to edges of stone slabs one edge, such as in steps,shelf cooking platform, and other similar situations complete all as specifed and directed.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar (1:4) using water proofing compound @ 3% by weight of cement with sponage finish or as per manufacturer instructions on fair faces of concrete surfaces and finished even and smooth without using extra cement all as specified and directed.Note:-WPC will be measured and paid for separately.

Supply only integral water proofing compound ISI marked complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar (1:6), on fair faces of brick work or concrete surfaces or dubbing out surface, finished even and smooth without using extra cement with sagol finish complete all as specified and directed

Dismantling of stone boulder / concrete masonary work built in cement mortar incl precast concrete articles.

Supply and fix 1000 litres capacity HDPE rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) double layered 'ISI' marked, hoisted & fixed in position including 20 mm dia ball brass valve with polythene flaot and flynut, with existing inlet, outlets & provision of washouts, vent pipe, nipples of suitable size complete all as specified & directed.

M&L for PCC 1:2:4, type B0 laid as base of water tank, roof slab and any other locations with water proofing compound complete all as specified and as directed.

Taking down chowkats or frames of wooden / steel n exc 1.5 sqm (without taking off shutters from the frames) & removing from site. Note : for steel chowkhats removed shutter only from window.

Taking down chowkats or frames of wooden / steel n exc 1.5 sqm (without taking off shutters from the frames) & removing from site. Note : (ventilator only)

Taking down chowkats or frames of wooden / steel exc 1.5 sqm & n.exc. 4 Sqm (without taking off shutters from the frames) & removing from site.

Taking down shutter of wooden / steel exc 1 sqm & n.exc. 2 Sqm complete & removing from site.

S&F solid PVC door frame of size 50 mm x47 mm made out of 5 mm plain colour PVC sheet, reinforced with MS square tube, complete all as per specification and drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (styles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and single side prelaminated PVC sheet 5 mm thick for top rail, lock rail and bottom rail and stiles and rails having one side feathered edge, on other side 10 mm 900 bent edge, panelling to be fitted in MS frame welded/sealed to the stiles and rails and 15 mm thick PVC sheet beading inside and decorative PVC beading of 10 mm x 10 mm all as per specification and drawing indication in SSR Part-II 2010.

S & F pressed steel frames for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 105 x 60 mm filled with PCC 1:3:6 type C-0 complete all as specified and as directed.

M&L for panelled door shutter with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm thick veneered partical board with commercial veneering on both face complete all as specified and as directed.

S & F butt hinges 100 mm size MS cold rolled medium weight all as specified.

S & F butt hinges 75 mm size MS cold rolled medium weight all as specified.

S&F aluminium anodised barrel tower bolts of extruded section 200 mm long of ISI mark.

S&F aluminium anodised barrel tower bolts of extruded section 150 mm long of ISI mark.

S&F aluminium alloy sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 300 mm of ISI mark..

S&F Extruded aluminium alloy handles, fabricated type., anodised 150 mm size of ISI mark.

S&F Extruded aluminium alloy handles, fabricated type., anodised 100 mm size of ISI mark.

S&F floor door stopper, aluminium alloy body and tongue anodised with hard drawn steel spring of 140 mm size overall of ISI mark..

S&F in repairs aluminium powder coated decorative type curtain rod 20 mm dia complete all as specified and as directed.

S&F aluminium powder coated brackets suitable for 20 mm dia curtain rod (minimum projection from wall 75 mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for Preparation of new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. complete all as specified and as directed.

M&L for Preparation of old steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F in repair stainless steel S 304 material made from 38 mm outer dia and 16 gauge fixed using S/S 304 anchor fasteners and sturd supports in position including flanges etc embeded in PCC 1:2:4 and including necessary buffing complete all as specified and as directed.

S & F three track sliding window with two or more shutter with 4 mm thick tinted glass, one shutter using stainless steel wire cloth 0.36 mm nominal dia & 1.40 mm width aperture for mosquito proofing with good quality bearing, handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections complete all as specified and as directed by Engr-in-Charge.(a) Bottom frame - 20620 (b) Top & Vertical frame - 20621 (c) Handle (side) - 20606 (d) Shutter Inter lock - 20724 (e) Shutter Top & bottom - 20844 (f) Glazing clips - 19352.

S&F glass ventilators using 5 mm thick plain glass and following aluminium powder coated sections conforming to and rubber beading etc complete all as specified and as directed :-(a) SP : 20048. (b) Glazing clips : 19352

S&F Aluminium powder coated single leaf door on pivots alongwith hydraulic door closer door lock , handle, 5 mm thick tinted / frosted glass fixed with rubber beading in top panel and glazing clips MS clamps and 12 mm thick laminated particle board as bottom pannel both side laminated using following sections as directed by Engr-in-Charge. (a) Rectangular tube - 14005 (b) Vertical rail - 19501 (c) Top rail -19503 (d) Middle rail -20060 (e) Bottom rail- 19511

S&F in collapsible steel gate, top hung,consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfasts and bracket complete all as specified and as directed.

M & L for Cement concrete in cills, steps, coping, kneeler, apex stone, water throughs,chajja or of other similar works slightly rounded or chamfred angles and throating of type B0 1:2:4 (12.5 mm stone agregate) complete all as specified and as directed.

M & L for Water proofing treatment to RCC roof slab, walls, chhajjas etc, shall be carried out as specified below including Removing of existing bitumenous tarfelt including cement screed bed and clean the surface with wire brush and washing with water to achieve the original surface of slab including removing of bitumen primer applied on slab all as apd and as directed by Engineer-in-Charge. (a) Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of ShaliTex primer (solvent based bituminous primer) conforms to IS: 3384-1986 coat of ShaliTex primer @ 0.3 Kg/Sqm shall be applied on the prepared and cleaned roof surface and parapet. Ensure not to apply when temperature is less than 5° C or during foggy period. Primer shall be allowed to dry for overnight. (b) Providing and laying APP (Atactic Polypropylene polymer) 3mm thick SuperThermolay Spun bonded non woven polyester reinforced APP modified water proofing membrane, black finished reinforced with non woven polyester matt weight not less than 3.5 Kg/Sqm. The laying of membrane with a 75 mm longitudinal and 100 mm transverse direction overlap shall be provided. (c) Apply SuperThermolay APP 3mm and weight not less than 3.50 Kg /Sqm thick membrane on primer, membrane shall be laid using LPG torch and sealing all joints etc . and preparing surface complete. (d) Finally applying a coat of Super Silver Shield confirmed to IS: solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified & as directed by Engr in Charge. Note :(i) Contractor shall submitt 10 year OEM guaranttee for water proof treatment.

M&L for precast cement concrete design mix solid block masonary exceeding 10 cm width and setting in cement mortar 1:6 of Gde C-5 complete all as specified and as directed.

S&F in repairs of PVC (SWR) floor /Nahani trap 75 mm dia of outlet with grating incl jointing with solvent cement complete all as specified and as directed.

S&F in repairs PVC (SWR) pipe, single socketed in any length with rubber ring joints, 110 mm bore, fixed to wall including clamps of required size complete all as specified & directed.

S&F in repairs 110 mm dia PVC (SWR) bends any radius complete all as specified & directed.

S&F in repairs vitreous china wash down floor mounting EWC of snow white including fixing bolts etc with flat bottom including MS, CP or aluminium anodised hinges devices etc complete all as specified and directed.

S&F in repairs of plastic water closet seat cover closed pattern with flat bottom ,and cover and mild steel chromium plated hinging device in repairs.

S&F in repairs Health faucet complete all as specified & directed.

S&F in repairs PVC CARRIE twin flushing cistern 10 Ltr capacity low level snow white with inlet valve , float handle, inlet and out let connection, bend pipe complete all as specified & directed.

S&F for oval shaped snow white vitreous china WHB table top fancy type of overall size 595 x 380 mm, 32 mm CP waste coupling, PVC waste pipe etc complete, including granite slab counter of black colour as approved and of size 1.20 m x 0.60 m including grounding edges etc complete cutting nitches rounding edges etc complete, horizontally supported by 01 No of 35 mm thick cuddappa stone slab one side mirror polished and vertically supported by 02 No 35 mm thcik complete all as specified and directed by Engr-in-Charge.

Vitreous China urinals, half stall type, complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe).

M&L in repairs 15 mm dia brass self closing angle cock prismatic for urinal with wall flanges and 200 mm connecting pipe fixed complete all as specified and as directed.

S&F in repairs urinal spreader of brass body chromium plated for fixing with 15 mm dia pipe suitable for urinal complete all as specified and as directed.

S&F in repairs vitreous china wash hand basin pedestal snow white 630 mm x 480 mm flat back inclduing and providing wste pipe 40 mm dia medium grade, CP brass waste coupling 32 mm dia with check nut washer etc complete all as specified and directed.

S&F in repairs two way bib cock with single knob and wall flange complete all as specified and as directed.

S&F in repairs fancy type pillars taps of swan neck spout left and areator, screwed for iron pipe complete all as specified and as directed.

S&F in repairs 15 mm dia angle cock with wall flange chromium plated and cup consealed type screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs fancy type sink cock (wall mounted) with 170mm (6.5'') long swivel spout and wall flange, screwed for iron pipe complete all as specified and as directed.

S&F high density 40 mm bore polythylene pipes (HDPE) of pressure rating 6 kgf / cm sqr fixed complete to wall or in floors with necessary socket, elbow & bend etc complete fixed to wall or in floors etc complete all as specified and as directed. (Note : pipe will be laid under floor)

S&F in repairs PVC connection 15 mm size with PTMT check nuts of length 450 mm.

M&L for preparation new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L for preparation new palstered surface of wall and applying two coats of oil bound distember over a coat of primer complete all as spd and directed.

M&L for preparing old surface of wall by complete removal and applying one coat of oil bound distember complete all as specified and as directed.

M&L for preparing old surface of wall by complete removal and applying one coat of cement based paint complete all as specified and as directed.

Removal of old building material/concrete beyond the lead included in the rates, including loading, unloading and stacking at the destination to a distance not exc. 5.00 km.

M&L for point wiring with 1.5 sqmm PVC insulated (R/Y/B for phase and black for neutral) unsheathed multi stranded copper conductor ,1100 volts grade ,FRLS cable in and including PVC conduit in concealed with all accessories and 1.5 sqmm green in colour PVC insulated standed copper conductor cable for earth continuity connected to common earth dolly including concealed MS sunken box with earth dolly flush type with 3 mm thick pre laminated bakelite sheet for mounting fitting such as switches ,sockets , fan regulators etc complete all as secified and directed by Engineer in charge for one light /fan /bell point controlled by one switch.NOTE : - (i)Two runs of 1.5 sqmm conductor and earth wire including one run of PVC conduit shall be measured as one unit length (ii) Cutting in chases and pointing and making good of disturbed surfaces will be done by contractor without any extra cost

All as per item No 77 here- in- above but for 3 pin 5 Amps socket outlet point on same board.

All as per item No 77 here- in- above but for 3 pin 5 Amps socket outlet point on the independent board.

M&L for point wiring with 2.5 sqmm PVC insulated (R/Y/B for phase and black for neutral) unsheathed multi stranded copper conductor ,1100 volts grade ,FRLS cable in and including PVC conduit in concealed with all accessories and 2.5 sqmm green in colour PVC insulated standed copper conductor cable for earth continuity connected to common earth dolly including pressed steel terminal box/PVC box surface /flush type with 3 mm thick pre laminated PVC sheet for mounting fitting such as switches ,sockets etc complete all as secified and directed by for one 15 amp socket controlled by one switch complete NOTE : - (i)Two runs of 2.5 sqmm conductor and earth wire including one run of PVC conduit shall be measured as one unit length (ii) Cutting in chases and pointing and making good of disturbed surfaces will be done by contractor without any extra cost.

All as per item No 79 here- in- above but 2.5 sqmm for 15 amps socket outlet point on the same board

S&F Piano type switch 5 amps single pole.

S&F ceiling rose surface type 65 x 50 mm three terminals.

S&F switch Piano type 15 Amps SP one way all as specified.

S&F of socket outlet 5 Amps 3/5 pin 230 volts flush type.

S&F of socket outlet 2 in 1 (multipurpose) 3 pin 5 and 15 Amps flush type all as specfied.

S&F lamp holder (Angle /bracket) insulated body with back plate for batten fitting.

S&F box type LED light fitting,1 x 20 watt , 230 V,C surface mounting white powder coated CRCA sheet steel housing with a perforated metalic frame complete with 20 W LED tube complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

S&F box type LED light fitting,2 x 20 watt , 230 V,C surface mounting white powder coated CRCA sheet steel housing with a perforated metalic frame complete with 2 x 20 W LED tube complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

S&F two module ceiling fan regulator Electronic step type suitable for fan 1200 mm sweep fans complete all as specified and as directed..

Disconnecting and taking down the existing ceiling fan of any size , and deposited to MES E/M store for safe custody complete all as directed by Engineer in Charge.

M&L for cleaning ,overhauling ,lubricating ,spray painting ,with one coat of synthetic enamel paint ,wiring MES No,after overhauling and refixing the fan complete all as directed by Engineeer in charge.

S&F in replacement of LED energy efficient street light fitting 25 Watt LED pressure die cast aluminium housing in heat resistant glass covered with IP-66 protection and including GI pipe as required length and size with fixing accessories complete complete all as specified and as directed.

S&F in replacement of sleek LED mirror light fitting 14 Watt complete in all respect having high output diffuser of 600 mm length complete all as specified and as directed.

M&L for sub main wiring complete with four single core 4x6 sqmm ,1100 volts grade ,FRLS , PVC insulated ,standed copper conductor cable with continuous copper earth conductor of 2 x 6 sqmm in PVC casing caping of suitable size not less than 32 mm complete all as specified and as directed.

M&L for sub main wiring complete with two single core 4 sqmm ,1100 volts grade ,FRLS, PVC insulated ,standed copper conductor cable with continuous copper earth conductor of 1 x 4 sqmm in PVC casing caping of suitable size not less than 20 mm complete all as specified and as directed.

S&F 240 V , single pole and neutral enclosure with a two pin and earth plug and socket complete with one 20 amp single pole MCB complete all as specified and as directed.

S&F vertical 4 way TPN double door ,flushed on wall , MCCBs as incomer is 3 pole V-tec of 125A rating & 16KA breaking capacity and outgoing MCB SP/TP, MCCB is pre-fitted at factory & including price of MCCB complete all as specified and as directed.

S&F MCB DB ,TPN 4 way , double door ,with 200 amp rated busbar 415 V complete all as specified and as directed.

S&F MCB DB ,SPN 8 way , double door ,with 200 amp rated busbar 240 V complete all as specified and as directed..

S&F MCB DB ,SPN 4 way , double door ,with 200 amp rated busbar 240 V complete all as specified and as directed..

S&F in repair MCB SPN 40-63A , 10 KA , C series,Amps 230 Volts, complete all as specified and as directed.

S&F in repair MCB SP 6-32A , 10 KA , C series , Amps 230 Volts,complete all as specified and as directed.

S&F MCB tripple pole and neutral rated capcity 63 Amps, 415 volts breaking capacity 10 KA , C series complete all as specified and directed.

Taking down carefully point wiring any type and size for light /fan /5 /15 amps plug point and switch socket etc and making good the disturbed surfaces.

Taking down Main switch /DBs (including MCCB/MCB) of any make and type including teakwood board etc complete and making good the disturbed surfaces including colour wash.

Taking down old unserviceable / worn out aluminium service /sub main of any type and size.

M&L for Earthing complete with GI earth plate electrode 600 mm x 600 mm x 6.3 mm thick, buried directly in ground in earth pit not less than 2.25 metres depth below normal ground level with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and including GI wire 4 mm dia, as earthing lead connecting to equipment by means of GI bolts & nuts etc with provision of charcoal and salt etc all as per electrical plate No-3 of SSR part-I 2009 including RCC cover and MS angle iron frame, watering with GI pipe 20 mm dia (medium grade) & MS funnel, concrete pit including excavation and earth work in any strata and testing on completion etc. complete all as specified and as directed by Engineer-in-Charge.

M&L for fixing earth continuty or main earth lead fixed to wall or buried in ground or drawn in GI pipe with 4 mm GI wire.

shiva traders

S G Engineers

Parhar Enterprise

Gauri Associates

Suma Construction

RAJKUMAR KISHANCHAND JASWANI

M/s.BAJRANG CONSTRUCTION

M/S V. R. Kench