Tender for augmentation of 100 KVA, 11/04KVA DTR into 250KVA , 11/0.4 KV DTR at Shashin in (E ) Section Sissu under ESD Keylong

SUPPLY PART

Supply of 250KVA , 11/0.4 KV Transformer (outdoor) (Qty.= 1 No.,Provided by HPSEBL )

Supply of Energy Meter 3 phase 4 wire CT operated Static Tri-Vector meter(CT-400/5 A) for 250KV A DTR (Qty. =1No.,Provided by HPSEBL )

LT cable 3.5 core 240 mm² i/c incoming

LT cable 3.5 core 185 mm² i/c outgoingx2

LT Distribution Panel Box with MCCB for 250 KVA ( 400 A, 36KA , 4 P) and SFU (100A,4 NO, rewirable)

Supply of Aluminium Thimbles

Supply of Copper Thimble

Supply of LT Switched Capacitors 81-KVAr for 250KVA DTR

Supply of M.S. Hexagon Nuts & Bolts of Various sizes

250 KVA DTR PLINTH and Fencing

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m:- all kind of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:2:4 (1 Cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for :

Foundations, footings, bases of columns, etc. for mass concrete.

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.Made of G.I. wire of dia 4 mm.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Supplying and stacking at site:- Bajri Spreading of stone aggregate 20 mm thick.

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :300x16 mm.

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm.

ERECTION PART

Erection charges i.e (Erection of 250KVA DTR, LT Cable, LT box, Energy meter), Jumpering etc. & Dismentling of old DTR and allied acessories ( 50% amount of erection of DTR) as per Cost Data FY 2025-26 Erection=(16390+2550)=18940 Dismentalling=18940/2=9470 i.e Total Labour Charges=18940+9470=28410

Please Enable Macros to View BoQ information