PROVN OF TOILET NEAR OLD SAILING CLUB AND TWO COVERED PARKING SHEDS FOR YOs BLOCK AT CME PUNE

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. N exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/ dense soil

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. N exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/disintegrated rock

M&L For Cement concrete 1:4:8 type D-2, ( using 40 mm graded stone aggregate ) as in foundations, filling and mass concrete etc. Complete as directed

Providing precast cement concrete solid building blocks or slabs 1:3:6 type C1 set in CM 1:6 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls

M&L precast solid block masonry of block 1:3:6 type C-1 wall exceeding 10 cm in width and built in cement mortar 1:6 complete all as specified and directed.

M&L For RCC 1:2:4 type B-1, ( using 20 mm graded stone aggregate ) as in beams, cantilevers, bed block, bressummers, lintels over 1.5m span , including necessary form work etc . Complete al as specified and as directed.

M&L 15mm thick cement plastering on concrete surfaces in CM (1:4) finishing surfaces even and smooth without using extra cement complete all as specified and as directed.

M & L 15mm thick rendering on fair face of brick work or concrete surfaces in CM 1: 6 with finished the surface even & smooth without using extra cement.etc. Complete as directed.

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc. complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley, gutters etc. complete all as specified and directed.

S&F Framed work such as roof trusses(framed), trusses purlins, crane gantries , rails and fastenings and heavy bracket framing(beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410-W(Gde E-250) Quality A complete all as specified and directed.,

Preparation of new or previously untreated surfaces of iron of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a of red oxide primer complete all as specified and directed

S&F For Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete

S&F For 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane

S & F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube etc all as specified and as directed.

S & F factory made solid PVC moulded door shutter, 30 mm thick 2mm thick 3D wood grain Moulded PVC sheet polyurethane painted on the front face & 2mm plain colour PVC sheet on back face complete all as specified and as directed.

S & F Mild steel butt hinges medium weight , cold rolled, 100mm, ISI marked, complete all as spd .

M&L Aluminium tower bolts anodised of size 150 mm complete all as spd .

S&F 150 mm long aluminium anodised handles or extruded section complete all as specified and directed.

S&F 300mm long Aluninium alloy, anodised ,Aldrop sliding door bolt with hasp , staple,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F 200 mm long Aluninium alloy, anodised , sliding door bolt with hasp , staple,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F 15mm bore medium grade galvanised steel water tubing with all fitting & fixed complete to walls or ceiling or laid in floors all as specifeid and directed.

S&F 20mm bore medium grade galvanised steel water tubing with all fitting & fixed complete to walls or ceiling or laid in floors all as specified and directed.

S&F vitreous china wash basin , white , flat back, size 630x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets , waste coupling 32 mm dia complete all as specified and directed.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests incld S&F 10 liters PVC flushing cistern high/low, flush pipe, necessary lean concrete 1:3:6 type C2 etc complete

S&FVitreous China wash down water closet pan (pedestal pattern), white incld S&F 10 liters PVC flushing cistern high/low, flush pipe, health fauset toilet paper holder, seat cover recessed type, fixing bolts complete all as specified and directed

S&F brass chromimum plated two way bib cock fancy type, 15mm bore ( min Wt. 550 grams) of approved make by EIC/ GE etc.complete all as specifed and as directed.

S&F 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated fancy type , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long shanks and flynuts, screwed for iron pipe complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete

S&F 15mm fancy type bib tap, chromium plated concealed with crutch or butterfly handle, screwed down , screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F 15mm dia stop valve chromium plated concealed fancy type screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for union complete all as specified and directed.

S&F 110mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm PVC(SWR) bend any radius complete all as specified and directed

S&F 110mm PVC(SWR) junction single(single T) equal or unequal complete all as specified and directed.

M&L 75 mm bore PVC floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F 110mm PVC(SWR) vent cowl complete all as specified and directed.

S&F in repair Brass chromium plated tubular towel rail, 20mm dia , D type 60cm long between flanges complete all as specified and directed.

S&F Shower rose arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms

S&F For 1000 ltr. Capacity rotational moulded polyethylene water storage tanks cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

M&L 20mm bore dia ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

M & L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

M&L machine cut cudappa stone slab 18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc. Complete incld screed bed 15 mm thick in CM 1:6

M&L for glazed ceramic coloured tiles in verticle surface 350mmx250mmx7mm /450mmx350mmx7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat 10mm thick cement mortar in 1:4 complete all as specified and directed,

M&L Preparation of newly plastered or unplastered surfaces on wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified.

M&L preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over one coat primer on walls complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, leveled and rammed including watering all as specified and directed.

M&L Hardcore of gauge exc 63 mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

M&L Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in subbase 100 mm thick

Excavation in trenches n.exc 1.5m wide and n.exc 1.5 m depth, for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 sqm on plan and n.exc 1.5 m in dedpth and getting out in hard/dense soil complete all as specified and directed

Removing excavated material (soil) n.exc 50m and deposited where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Returning , filling in, includidng spreading , levelling , watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed.

Materials and labour for plain cement concrete (1:4:8) Type D-2 using 40mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L 100 mm thick PCC 1:4:8, type D-2(using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L precast solid block masonry of block 1:3:6 type C-5 wall exceeding 10 cm in width and built in cement mortar 1:6 complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work of concrete susrfaces finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparing surface of plastered or unplastered and applying two coats of cement base paint over a coat of primer complete all as specified and directed

M&L sand filling under floors or in foundation including watering as required.

M & L Machine pressed precast concrete interlocking pavour block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with glossy finish colour shade as decided by Engr-in-Charge.

M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

Excavation in trenches n.exc 1.50m wide and 1.50m depth for foundation, man hole etc and getting out in hard/dense soil

M&L cement concrete 1:2:4 type B-2,(using 40mm graded aggregate) as in surface channels and drain complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm gde agg) as in foundation and mass concrete complete as specified and directed by Engr-in-Charge.

M&L for precast cement solid block masonry 1:3:6 type C-1 wall exceeding 10 cm in width and built in cement mortar 1:6 all as specified and directed.

Rendering 15 mm thick in cm 1:4 on other than fair faces of brick work or concrete surfaces finished even and smooth without using any extra cement complete all as specified & directed.

M&L for RCC drain pipes 150mm , class NP-3 laid in trenches and jointed complete with collar all as specified complete as specified and directed by Engr-in-Charge.

M&L for PCC 1:4:8 type D-2 (40mm gde stone agg) as in Concrete bed to drain pipes including forming cradles; after they are laid and join ted, dia of pipe 150mm complete as specified and directed by Engr-in-Charge.

Returning , filling in, includidng spreading , levelling , watering and well ramming in layers not exceeding 25 cm in hard/dense soil complete as specified and directed by Engr-in-Charge.

Removing excavated material (soil) not.exceeding 50m and deposited where directed at a level not.exceeding 1.5 m above the starting point complete as specified and directed by Engr-in-Charge.

M&L plain cement concrete 1:2:4 type B-1, using 20mm graded stone aggregates, as in copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, including provn of form work if required as directed.

S & F in 110 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to wall with and including clamps complete all as specified and directed by Engineer-in Charge.

S & F 110 mm PVC (SWR) vent cowl complete complete all as specified and directed by Engineer-in Charge.

M & L RCC (Nominal Mix) type B1 1:2:4 using 20 mm graded aggregete as in slab supported on walls/sub base complete all as specified

M & L for form works to sofits of suspended slab etc. n. exc. 20cm thick flat fair finished surfaces complete all as specified.

M&L Providing precast cement concreteReinforcement Cement concrete type B1 (1:2:4) using 20 mm graded stone aggregate as in cover slab for drain & manholes etc. as directed incl use and waste of necessary form work complete all as spd.

M & L MS TMT Bars 10mm dia and over cut to length, bend to shape required, incl cranking, bending, for hooping for columns, hooking ends and binding with and incl MS wire (Annealed) not less than 0.9mm dia or securing with clips complete all as specified.Fe-410-W (GdeE-250)

M&L TMT bars 6mm to 8mm dia and over cut to length, bent to shape required including cranking, bending hooking ends, and binding with mild steel wire not less than 0.9 mm dia complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150 mm bore of pipe

M&L Point wiring complete with and including two single core FRLSH PVC insulated unsheathed flexible bright annealed multi stranded copper conductor cables 1.5 Sqmm (22/0.30 mm) 1100 volts grade and one 1.5 Sqmm (22/0.30 mm) 1100 V grade FRLSH PVC insulated, unsheathed flexible multi stranded copper conductor cable as continuous earthwire connected to metallic bodies of luminaires/fans etc; at one end and to common earth dolly at other end, drawn through and including heavy grade PVC casing and caping on walls/ceiling including all accessories/fittings/ etc; ISI marked with and including factory made PVC board sunk surface type of required size with 3 mm thick hylam/ PVC sheet screwed with 4 No's cadmium plated screws and cup washers for mounting switches, socket outlets and fan regulator etc. and PVC square box for mounting ceiling rose / holders etc. including taking down old unserviceable existing point wiring of any type all as specified for the following:-

One light point controlled by one number one way switch.

One ceiling fan / exhaust fan point controlled by one one way switch and regulator including earthing of regulator.

One 6 Amp 5 pin socket outlet point on independent board.

Ditto- all as per item No 85 here-in before but using 2.5 Sqmm (36/0.30 mm) cables for one 16 Amp, 6-Pin socket outlet point on independent board

S&F Switch piano flush type 5/6 Amp single pole one way 230 volts ISI marked white/ivory finish complete all as specified and directed.

S&F Switch piano flush type 15/16 Amp single pole one way 230 volts ISI marked white/ivory finish complete all as specified and directed.

S&F Switch piano flush type 5/6 Amp single pole two way 230 volts ISI marked white/ivory finish complete all as specified and directed

S&F Socket outlet, flush type, multipurpose 230 volts, suitable for 2 in 1, 3 pin 6 Amp plug, white/ivory finish complete all as specified and directed complete all as specified and directed

S&F Socket outlet, 2 in 1, flush type, universal, 230 volts, suitable for 3 pin 6 Amp and 3 pin 16 Amp plug, ISI marked white/ivory finish complete all as specified and directed.

S&F ceiling rose, PVC/polycarbonate isolated body, ISI Marked, with 3 terminals complete all as specified and directed.

S & F Factory made sheet metal enclosure of MCB DB, SPN 230 Volts, double door front openable, protection class IP-43, 8 way with 200 A rated bus bar and neutral bus terminal for mounting MCBs and for 8 way circuits complete, fixed flush with wall in wall nitch, making incoming and outgoing electric connection with lugs / thimbles etc. complete all as specified and directed.

S&F MCB SPN 32 Amp, current rating 240 Volts, 10 KA, 'B' curve provided in the MCB DB complete with connection, testing and commissioning all as specified and directed.

S&F MCB SP 6 to 32 Amp (as directed), current rating 240 Volts, 10 KA, 'B' curve provided in the MCB DB complete with connection, testing and commissioning all as specified and directed.

M&L Earthling complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick, buried vertically in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers, electrode connected to and including galvanised iron earth lead wire of size 4.00 mm dia and GI pipe light grade 15 mm dia protection pipe, both to be provided to the extent of 7.5 m from top of earth plate to above ground level, by means of bolts, nuts and washers of galvanised iron or steel including necessary excavation and earth work in any type of soil, removal of surplus soil to a distance n. exc 50 m, PCC 1:3:6 type C-1 earth chamber provided with RCC 1:2:4 type B-1 concrete cover of dimensions 54 cm x 54 cm x 10 cm reinforced with 6 mm dia MS round bar and handle of 8 mm dia MS bar and including 20 mm dia GI pipe medium grade for watering arrangements with funnel internally secured with wire mesh all as shown in electrical plate No.3 of SSR Part I, complete all as specified and directed, including testing on completion

S&F LED lights fitting 1 x 20 W, 220V, AC decorative ultra slim round profile with extruded polycarbonate type with driver, holder including connecting up flexible copper conductor cable of suitable size from ceiling rose. complete all as specified and directed.

Supply and fix Exhaust fan 300 mm sweep, Steel body ,single phase, AC 230 Volt heavy duty, with blade frame and louvers shutter including three core flexible copper conductor cable of required lenght of size 23/0.0076 from ceilling rose/ connector to fan terminal, fixing the fan with suitable size of nut, bolt washer, complete all as specified and directed

Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and making good surface for laying of cable complete all as specified and directed by Engr in charge

(a) Soft /Loose Soil

(b) Hard/Dense soil

Returning filling in excavated soil in trenches, watering and well ramming in layers n exc 25 cm complete all as specified.

Removal of surplus excavated spoil to distance n exc 50 metre compelete all as specified and directed.

Supply , laying, connecting and testing cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured , electric power cables ( heavy duty) with stranded aluminium conductor 1100 volts grade in trenches/ passing through pipe/fixing on walls, floors etc incl using suitable clamp of cross sectional area 2 core 10 Sqmm Sqmm all as specified and directed.

Supply , laying of DWC Pipe of outer dia 50mm and inner dia 38 mm all as per specified and directed.

Supply and laying pipe galvanised Light grade including fittings 40 mm dia laid in trench complete all as specified and directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and making good surface for laying of cable complete all as specified and directed by Engr in charge

(a) Soft /Loose Soil

(b) Hard/Dense soil

Returning filling in excavated soil in trenches, watering and well ramming in layers n exc 25 cm complete all as specified.

Removal of surplus excavated spoil to distance n exc 50 metre compelete all as specified and directed.

Supply and laying pipe galvanised medium class including fittings 20 mm dia laid in trench complete all as specified and directed.

Gun-metal, globe or gate valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Cutting 40/50mm bore existing steel tubing for alternation or additions of new pipe connection of 20 mm bore with necessary Tee, bends etc

Excavation in post holes (or similar hole) each n.exc 0.50 cum getting out, returning, filling in and ramming earth or borken rubble mixed with earth around in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed by Engr-in-Charge

S & F steel work in MS hollow tubes sections as in main and cross beam, hip and jack rafters, purlins where connected to common rafters and post, complete using ERW or induction butt welded tubes conforming to IS 1161-1979 (Fe-410-w(Gde-E-250) complete all as specified and directed by Engr-in-Charge.

S & F (Fe-410-w(Gde-E-250) quality B mild steel plates, plain or chequered, 6mm thick or over in thickness in available sizes complete all as specified & directed.

M & L for two coats of synthetic enameled paint on steel and iron surfaces over one coat of red oxide primer on surfaces of iron of any description over 10 cm in width or girth including preparation of new surfaces complete all as specifed and directed

M & L for plain cement concrete (1:4:8) type D-2 using 40mm graded aggregate in foundations, filling and mass concrete below wall complete all as specified and directed

S & F pre painted tensile cloth 750 Gsm roof sheet as in roof covering / cladding to wall fixed with self tapping screws as specified and directed.

Removing excavated material n.exc 50m and deposting where directed at a level n.exc 1.5m above the starting point complete

Sunrise Traders (BID ID -3271798)

MAXIM ENTERPRISES (BID ID -3266493)