Providing Development works for the Construction of 2 Nos of Sub Inspector and 28 Nos of PC/HC Quarters for Police Personnel serving in Aliyar Police Station at Anaimalai instead of Aliyar in Coimbatore District. Re-tender

Amount

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

1.6 : Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

1.8 : Earth work excavation for Open Foundation in soft disintegrated rock, laterite Kankar or soft rock not requiring blasting (Excluding Refilling). a. 0 to 2 mt.

2.6: Supply and Filling of 40mm HBSJ

2.7: Supply and Filling of 20mm HBSJ

7.2 : Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1 : Filling with Excavated Earth

24 : Manufacturing & supply of steel windows (Weight basis)

30 : Ellispattern

37.1 : White washing 3 coats (slaked)

39 : M.s Grills

41 : Painting - New "iron work"

53.3 : C.I. Steps ( 5 kg)

ANNEXURE I 2.1.3 : Filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

3.8.1 : P.C.C. 1:3:6 for Foundation & Basement using 20 mm metal (using crushed stone sand)

6.2.1.1 : Brick work in C.M. 1:5 (F& B) using Fly ash bricks of size 230x11x70mm (using crushed stone sand)

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

9.2.1.1 : Brick work in C.M. 1:6 using Fly ash bricks of size 230x11x70mm (using crushed stone sand) a. In Stilt floor/Ground Floor

10.2.1.1 : Brick partition work in C.M. 1:4 using Fly ash bricks of size 230x11x70mm (using crushed stone sand) 110 mm tk (B.P.) a. In Foundation and basement

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

d.Vertical wall

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand)

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand)

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand)

35.1.1 : Plastering 1:3, 12mm tk with WPC (using crushed stone sand)

38.6 : One coat white cement for new walls and other similar works.

38.7 : Plastic Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

50.2.1 : Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm (using crushed stone sand)

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight)

58.5 : PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

361 : Concrete Designer Tiles flooring (using crushed stone sand)

799 : Two coat of OBD over one coat white cement for inner walls

ANNEXURE II A1) Supplying and fixing of 9 Watts LED bulbs

A2) Supplying and fixing of 4' long 18 Watts LED tube light with fittings

A3) Supplying and fixing of Bulk head fittings suitable for 12W bulb.

A4) Supplying and fixing of 25 Watts LED street light with fittings

A5) Supplying and fixing of 12 Watts LED bulbs

A6) Providing power roller finish for cement concrete road

A7) Supplying and fixing of SFRC Manhole Cover with frame with locking arrangements Size 60 x 60 cm including of all cost etc

A8) Supply and delivery of clear vertical wet type 5 HP,3 phase submersible pump set suitable for borewell

A9) Supplying and delivery of clear vertical wet type 3 HP submersible pump set suitable for openwell (Duty 100 lpm x 50m)

A10) Labour charges for the erection of submersible pumpset in borewell / openwell upto 5 HP

A11) Supply and delivery of Three phase DOL panel Board with two level guard auto start with ISI mark For 5 HP Submersible motor

A12) Supply and delivery of Three phase panel DOL Board with two level guard auto start with ISI mark For 3 HP Submersible motor

A13) Supplying and fixing of 2.5 sqmm pvc flat 3 core cable

A14) Supply and delivery of 32mm dia UPVC column pipe.

A15) Supplying and fixing of following dia GI/GM specials a) 32mm dia GI Adopter

b) 32mm dia GI coupling

c) 32mm dia GI Bend

d) 32mm dia GI union

e) 32mm dia GI Elbow

f) 32mm dia GI Tee

g) 20mm dia Gun Metal Gate valve

h) 50mm dia Gun Metal Gate valve

i) 65mm dia Gun Metal Gate valve

j) 50mm dia Non return valve

k) 65mm saddle

l) 15mm G.M. Ferrule

m) 15mm dia Union

n) 15mm dia Coupling

o) 15mm dia Elbow

p) 15mm dia bend

q) 80mm dia Elbow

r) 80mm dia coupling

s) 50mm dia Elbow

t) 50mm dia coupling

u) 80mm GI Union

v) 75mm dia GM non return valve

w) 75mm dia GM gun metal gate valve

A16) Supply and fixing of 150mm dia MS bore well clamp set and cover

A17) Supply and delivery of 20mm dia Nylon rope

A18): Supplying and delivery and laying of following dia GI pipe "B" class in Below GL a) 32mm dia GI pipe

b) 50mm dia GI pipe

A19): Supplying and laying and jointing the following dia GI pipe "B" class of approved quality (Above GL ) a. 32mm GI dia

b. 80mm GI dia

A20) Supplying and laying of following dia PVC Pipe( 10kg for .per.cm2)in below ground level a) 75mm dia pvc pipe

b) 50mm dia pvc pipe

c) 40mm dia pvc pipe

A21) Supplying and laying of following dia PVC Pipe( 10kg for .per.cm2) in above ground level a) 75mm dia pvc pipe

b) 50mm dia pvc pipe

c) 40mm dia pvc pipe

A22) Supplying and delivery of following dia PVC/UPVC specials a) 50mm dia coupling

b) 50mm dia bend

c) 50mm dia Elbow

d) 50mm dia Tee

e) 50mmx40mm dia reducer

f) 40mmx32mm dia reducer

g) 32mm dia Elbow

h) 32mm dia Tee

i) 40mm dia Tee

j) 75mm dia Elbow

k) 50mm UPVC Hex nipple

l) 75mm dia bend

A23) Supply and delivery of 7 livers of navathal lock for doors

A24) Supplying and fixing of following size of Aluminium Dye casting letters & TNPHC Emblemwith MRF Powder Coating a) 6" Height Aluminium Dye casting letters

b) 10" Height Aluminium Dye casting letters

c) 2'0" (24")Height TNPHC Emblem

A25) Supply, delivery and fixing of 750 lit PVC water tank

A26) Providing Polymer Coating (Water Proof Coating)

A27) Supplying of following Aluminium aroumd LTUG Cable 3.5 core 70 sqmm Aluminium aroumd LTUG cable

A28) Supplying of following Aluminium aroumd LTUG Cable 3.5 core 35 sqmm Aluminium aroumd LTUG cable

A29) Supplying of following Aluminium aroumd LTUG Cable 4 core 16 sqmm Aluminium aroumd LTUG cable

A30) Supplying and fixing 3 no 200 Amps 500 volts grase/ well porcelin fuse unit

A31) Supply and fixing of cable gland suitable for PVC armored LTUG cable a.) Cable gland suitable for 3.5 core of 70 sqmm UG Cable

b.) Cable gland suitable for 3.5 core of 35 sqmm UG Cable

c.) Cable gland suitable for 4 core of 16 sqmm UG Cable

A32) Metering panel for 10 Services (8 flats + 1 common + 1 spare) Supply & erection of 125 Amps capacity floor mounting metering panel board (cubical type)

A33) Metering panel for 6 Services (4 flats + 1 common + 1 spare) Supply & erection of 125 Amps capacity floor mounting metering panel board

A34) Metering panel for 4 Services (2 flats + 1 common + 1 spare) Supply & erection of 125 Amps capacity floor mounting metering panel board

A35) Supply, delivery, laying and testing of 110mm dia PVC pipes (6kg/Sq.cm) Below Ground level.

A36) Supply and fixing of 65mm GI pipe (Class "B") of 9m length with MS base plate

A37) Supply and delivery of 2 x 6 sq.mm PVC armoured LTUG cable