Loading…
Loading…
Tender Value
₹16.3 L
Closing Date
5 Jan 2022, 5:00 pmClosed
The Executive Engineer
Public Works Department, Mahe. Near Sub Court, Mahe.
Construction of new Culverts at 7 locations across new beach road Mahe.
2021_PWDC2_8952_1
46/EEM/21-22/21(21-22)
Open Tender
Civil Works
Item Rate
84 days
Works at Mahe
Please refer Tender documents.
8 documents required · 8 mandatory
₹525
Exempted
2 Feb 2022
29 Dec 2021
6 Jan 2022
29 Dec 2021
5 Jan 2022
29 Dec 2021
Amount
Code No. 2.8.1:-Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m - all kinds of soil
Code No. 4.1.8:- Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size)
Code No. 4.3.1:- Centring and shuttering including strutting, propping etc. and removal of form work for - foundations, footings, bases for columns
Code No. 4.1.3:- Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
Code No. 5.12:-Providing , hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement , with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
Code No. 5.35:-Add for using extra cement in the items of design mix over and above the specified cement content therein
Code No. 5.22.7:-Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (ISI BRAND OF APPROVED MAKE) Fe - 415
Code No. 30.37:- Desilting the canal by removing silt, slush and debries from the bed of the drain removing the grass , buses etc., complete in uhygenic and foul condition including disposal of the same within an average lead of 1KM without polluting the environment by mechanical means
Code No. 15.2.1:-Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead - nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Code No. 11.3.1:-Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc .complete - 40mm thick with 20mm nominal size stone aggregate
Code No. 4.12A:-Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density - Using vibratory roller. (As per MoRTH specification, 4th Revision)
RAMESH TP
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .