AC Works for Extension of facilities of SSDVRS Shop

SUCTION AND DISCHARGE HARD DRAWN COPPER PIPING: Supply and laying of suitable suction and discharge hard copper refrigerent piping suitable for above supplied 8.5TR ductable AC unit with 9mm or better nitrile rubber insualation

DRAIN PIPE:Supply and laying of CPVC drain pipe for above supplied 8.5TR AC with U-trap with suitable bends and accessories complete. Make: Sudhakar/ Finolex/ Astral/ Ashirwad

ELECTRICAL CABLE: Supply and laying of suitable armoured electrical power supply cable from ODU to power supply point suitable for above supplied 8.5TR ductable AC

ELECTRICAL CABLE: Supply and laying of power/ control cable from IDU to ODU suitable for above supplied 8.5TR ductable AC unit

CANVAS CLOTH: Supply and fixing of Fire retardent canvas cloth with 150mm zip suitable for 8.5TR suctable split AC

MS STAND FOR ODU : Supply of MS stand for 8.5TR AC made of C-channel/ L angle with proper welding and painted.

22G DUCTING: Design, supply,Installation and Testing factory fabricated Ducting as per specification complete with supports, with GI rivets, nut-bolts with 3 mm thick neoprene gaskets duly installed between flanges. Food grade silicon sealant shall be applied in the longitudinal length of a ducts. 22 Gauge GI sheet make: TATA / JSW/ SAIL

24G DUCTING : Design, supply,Installation and Testing factory fabricated Ducting as per specification complete with supports, with GI rivets, nut-bolts with 3 mm thick neoprene gaskets duly installed between flanges. Food grade silicon sealant shall be applied in the longitudinal length of a ducts. 24 Gauge GI sheet make: TATA / JSW/ SAIL

INSULATION FOR DUCT: Supply and fixing of 13mm thick or better physically cross-linked XLPE insulation with factory applied reinforced aluminium foil adhered to the surface cleaned HVAC ducts with adhesive. Makes of Insulation: K-flex/ Vidoflex/ Insuflex/ Armaflex/ Trocellin./ Aeroflex

ACCOUSTIC INSULATION: Supply, fixing and testing of open cell accoustic instlation of 10mm thick or better. make: K-flex/ Vidoflex/ Insuflex/ Armaflex/ Trocellin./ Aeroflex

SUPPLY AIR DIFFUSER ALONG WITH AL VOLUME CONTROL DAMPER: Supplying, fixing testing commissioning of powder coated aluminium diffuser with aluminium volume control dampers with anti smudge ring & removable core. . Makes : Carriers, Airmaster, Sanford, Techno-crats, system Air

RETURN AIR DIFFUSER: Supplying, fixing testing commissioning of powder coated aluminium diffuser without aluminium volume control dampers with anti smudge ring & removable core. . Makes : Carriers, Airmaster, Sanford, Techno-crats, system Air

GI VOLUME CONTROL DAMPER: Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications of 18G.

GI FIRE DAMPER WITH FUSIBLE LINK: Supply and fixing of GI fire damper with fusible link as per site condition.

Supply of Inverter type, 3 star rated, 3TR Ceiling Mount Cassette Type Split Air Conditioners with cord less remote as per the following specifications Cooling capacity : 3TR or better Type : Inverter model Star rating as per BEE : 3 Star Min ID & OD units Coil Matl : Copper only Compressor : Scroll / Reciprocating / Rotary Refrigerant: Eco friendly refrigerant Makes: Carrier/ Blue Star/ Diakin/ O-General/ Mitsubishi only. Installation & commissioning of 3.0 TR Cassette A.C at proposed Locations including Gas charging ,testing. Civil works like Hole for pipeline and drain line and Closing of excess size holes with putty also included in vendor's scope. Scope also include core cutting, if required as per site condition.

Supply & laying of suitable size suction and liquid copper pipes with proper insulation through casing capping suitable to 3TR Celing Mount Cassette Type split AC. Scope also includes routing of pipelines with proper support by threaded rods from ceiling and C -channels etc.

Supply and Laying of Suitable 2.5sq mm, 5core power cable to connect power supply point to ODU for 3TR cassette AC (Make:Polycab/Havells/Finolex/ Gloster only)

Supply and Laying of Suitable 1.5Sq mm 3 core cable between IDU and ODU for control wiring for 3TR cassette AC. (Make:Polycab/Havells/Finolex / Gloster only )

Supply and laying of Drain pipe of 1" dia.PVC with suitable bends. Pipe shall be and foam to avoid sweating. Pipe line make: Sudhakar/ Ashirvaad

Supply and positioning of suitable Ms stands/ brackets for Outdoor units of 3TR Split Acs as per site requirement

DISMANTLING OF OLD ACS: Removal of old Split AC/ Tower AC from existing location and shifting to scrap yard/ store as per EIC direction. Scope Includes pump down of gas, safe disconnection of electricals and copper pipelines and shifting

No Rupees Only

Sucessful offer that is L-1 (Lowest offer) will be determined including GST.

The payment terms shall be governed as per the terms indicated in General conditions of contract.

Amount towards GST will be paid along with RAR payment against invoice.

The tenderers are requested to abide by the rules of prevailing GST act.

This BOQ specification has to be read in conjunction with technical specifications and tender drawings if any. Any ambiguty in these have to be brought to the knowledge of contract section before submission of tender to avoid future claims/dispute.

HAL/HD/MT/CT/25-26/6

HAL/HD/MT/CT/25-26/6

AC works for Extension of facilities of SSDVRS shop

Description

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

GST NO.:

PAN No.:

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Average annual financial turn over during the last 3 years, ending financial year 2023 [ should not be less than 30% of Amount put to tender]. Turnover for 3 years are compulsory.

TURN OVER IN Rupees

Pls Enter Turn over in Rs. for all the 3 years

ESI & PF Nos with proof (If any)

Related Document to be Uploaded to e-Procurement Portal

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender submission.

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

80% (One Work)

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

Pls Accept The Delarication

DECLARATION II

Pls Accept the Delaration II