2. Improvement of Shirasne Dhumalwadi Yelevasti Malegaon Factory Pahunewadi SH-60 To Khandaj (Khandaj Pati to Khandaj Gaonthan) Road ODR 184 km 13/500 to 16/500 Tal. Baramati Dist.Pune.

Labour charges for removing grass, thorney shrubs, Jungli shrub, Kubabul and alike grass along roadside making the ground clean by showel and phavaras etc. complete.

Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metre, stacking serviceable and unserviceable materials separately etc. complete.

Excavation for roadway in earth soil of all sorts, sand, gravel or soft murum including dressing section to the required grade camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed.

Excavation for roadway in hard murum and boulder including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed.

Excavation for catch/ side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed.

Excavation for catch/ side water gutter in hard murum and boulder strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed.

Providing earth work in embankment with approved materials obtained from other sources upto lead of 50 metre including all lifts, laying in layers of 20 centimetre to 30 centimetre thickness breaking clods, dressing to the required lines, curves, grades and section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97% of standard proctor density etc. complete (Material obtained from Other sources).

Watering and compacting of embankment formed of materials obtained from the road cutting, within a lead of 50 metre, not less than 97 percent of standard proctor density after laying them in layers of 20 centimetre to 30 centimetre with vibratory roller.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means- Grading I, using Screening Type-A(13.2 milimetre Aggregate).

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means Grading-II (Using Screening Type-B (11.2 milimetre Aggregate).

Supplying hard murum at the road site including conveying and stacking complete.

Spreading the hard murum for side width complete.

Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering complete.

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate (Natural Sand/ VSI grade finely washed Crushed Sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 milimetre, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor/ by suitable means as approved by Engineer-in-charge, compacting with vibratory roller, finishing and curing including preparation of sub-grade surface if required etc. complete.

Providing and laying in situ cement concrete M-30 with tremix treatment for 200 milimetre thickness for Concrete Road including laying plastic sheet of 125 micron with groove cutting of 4 milimetre wide and 20 milimetre deep, with necessary refilling with Refilling with Polysulfide Sealent (pouring Grade) conforming to BS:5212-1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing polyethylene foam backer road of required diameter (excluding reinforcement) with course and fine agreegates using VSI quality artificial sand etc. complete.

Providing and fixing in position TMT FE-500, 25 milimetre diameter dowel bars precoated with anticorrosive epoxy paint of required diameter 60 centimetre Long and at 30.00 centimetre center to center and wherever directed including handling, straightening, necessary cutting supported by HYSD chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete.

Providing and fixing in position TMT FE-500, tie bars precoated with anticorrosive epoxy paint of 12 milimetre diameter 70 centimetre long and at 30.00 centimetre center to center and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening, supported by assembly of HYSD chairs with proper alignment etc. complete.

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift from 1.5 metre to 3.0 metre) by Mechanical Means..

Providing soling using 80 milimetre size trap metal in 15 centimetre layer including filling voids with crushed sand/ grit, ramming, watering etc. complete.

Providing and laying in situ / ready mix cement concrete of Mix-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (VSI sand finely washed etc.)

Providing cast in situ / ready mix Mix-20 grade cement concrete for head walls of Cross Drainage work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with Superwisery Control and Data Acquisition, with Natural / Vertical Shaft Impact (VSI) standard Artificial Sand.

Providing and laying cement concrete pipe of Indian Standard 458:2003 non pressure-3 class of 1000 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete.

Providing and laying cement concrete pipe of Indian Standard 458:2003 non pressure-2 class of 450 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete.

Providing and fixing reinforced cement concrete 200 metre stone as per Indian Road Congress standard including fixing in block of cement concrete 1:4:8,painting lettering complete.

Providing and fixing reinforced cement concrete 1:2:4 ordinary kilometre stones including painting,numbering as per Indian Road Congress design for major district road kilometre stone and fixing in standard size cement concrete 1:4:8 block complete.

Providing and laying of hot applied thermoplastic compound 2.50 milimetre thick including reflectorizing glass beads at 250 grams per square metre area, thickness of 2.50 milimetre is exclusive of surface applied glass beads as per Indian Road Congress:35. The finished surface to be level, uniform and free from streaks and holes complete.

Providing and laying concrete pipe of Indian Standard Non Pressure class of 300 milimetre diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Testing Charges for conducting BASIC TEST OF CEMENT.Standard Consistancy Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength and Soundness test.

Testing Charges for conducting BASIC TEST OF AGGREGATE. Water Absorption, Specific Gravity,Impact Value Crushing Value test.

Testing Charges for conducting BASIC TEST OF AGGREGATE. Sieve Analysis test.

Testing Charges for conducting BASIC TEST OF AGGREGATE. Flakiness Index/ Elongation Index test.

Testing Charges for conducting FINE AGGREGATES. Fineness Modulus (Sieve Analysis),Silt & Clay Content test.

Testing Charges for Taking of core samples in concrete pavement.

Testing Charges for conducting CONCRETE Compressive Strength OF Cement Concrete Cube (Set of 3 cubes) test.

Testing Charges for conducting Concrete Mix Design (With all Tests on basic materials).

Testing Charges for conducting CONCRETE Flexural strength of Beam test.

Testing Charges for conducting SOIL / MURUM Sieve Analysis test.

Testing Charges for conducting SOIL / MURUM Liquid limit & plastic Limit test.

Testing Charges for conducting SOIL / MURUM Compaction Test (Proctor Density).

Testing Charges for conducting SOIL / MURUM C.B.R. Test (Lab) Excluding compaction test.

Testing Charges for conducting SOIL / MURUM Field Density test by Sand Replacement Method.

Testing Charges for conducting PAINT / THERMO-PLASTIC PAINT Glass bead contents & grading analysis Test.

Testing Charges for conducting PAINT / THERMO-PLASTIC PAINT Reflectance & yellowness index Test.

Testing Charges for conducting PAINT / THERMO-PLASTIC PAINT Flowability (Percentage residue) Test.

Testing Charges for conducting PAINT / THERMO-PLASTIC PAINT Softening Point (Ring & ball method) Test.

Testing Charges for conducting PAINT / THERMO-PLASTIC PAINT Drying Time Test.

Royalty Charges

Surcharge 2% on Royalty Charges

Please Enable Macros to View BoQ information