Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.7 LAccepted-AOC CHAMPAKNAGAR JIRANIA WEST TRIPURA PIN 799045 | WEST TRIPURA | TRIPURA | 799045 | L1 | Accepted-AOC Being L1 bidder. | |
| 2 | L2₹26.3 L+₹1.1 L (4.32%)Rejected-AOC F A ROAD MACHKHOWA PO PS BHARALUMUKH DIST KAMRUP M ASSAM GUWAHATI 781009 | KAMRUP METRO | ASSAM | 781009 | L2 | Rejected-AOC Not being L1 bidder. | |
| 3 | L3₹26.9 L+₹1.7 L (6.64%)Rejected-AOC | L3 | Rejected-AOC Not being L1 bidder. | |
| 4 | Rejected-Technical NOT AVAILABLE | - | Rejected-Technical Does not have appropriate a(ii) and b(i) category. | |
| 5 | Rejected-Technical NOT AVAILABLE | - | Rejected-Technical Does not have appropriate a(ii) and b(i) category. |
| Sl No | Description | Qty | Unit | MS DAS CONSTRUCTION L1 | M/S DAS CONSTRUCTION L3 | M/S RAJA CONSTRUCTION L2 |
|---|---|---|---|---|---|---|
| 1.00 | M&L for painting of electrical operated fire pump of horizontal split casing type with TEFC motor class F insulation of capacity 100 HP,3 Phase 415 volts ,including suction and discharge pipe line and air cushion vessel with drain and safety valves of appx length 2.5 mtr long and 250 mm dia MS pipes and painting of all valve controls(all types of valves and pipe lines in fire fighting room) with scrapping the existing paint with wire brush and painting with two coats of synthetic enamelled spray paint of existing colour of superior quality after making good to existing painted surfaces complete all as specified and directed. | 1 | Each job | 9,700 ₹9,700 | 10,500 ₹10,500 | 9,450 ₹9,450 Lowest |
| 2.00 | Material and labour for painting of Diesel Engine driven pump of split casing type of cap 85 HP with connected pipe lines with scrapping the existing paint with wire brush and painting with two coats of synthetic enamelled spray paint after making good to existing painted surfaces complete all as specified and directed. | 1 | Each job | 7,300 ₹7,300 | 8,500 ₹8,500 | 7,100 ₹7,100 Lowest |
| 3.00 | Material and labour for painting of Jockey pump of 500 LPM with TEFC squirrel cage motor class F insulation of cap 20 HP with connected pipelines by scrapping the existing paint with wire brush and painting with two coats of synthetic enamelled spray paint after making good to existing painted surfaces complete all as specified and directed. | 1 | Each job | 4,900 ₹4,900 | 5,300 ₹5,300 | 4,800 ₹4,800 Lowest |
| 4.00 | Disconnecting and dismantling the electric motor of defective Jockey pump set of capacity 20 HP,3 Phase 415 volts from the foundation by disconnecting earthing connection, shifting to civil workshop and removing burnt out windings, cleaning the slots, rewinding with super enamelled copper winding wire as per existing gauge and size, varnishing and heating complete, transporting to site and refixing at original position, and reasembling with pump, replacing the ball bearings as per existing size and make, connecting with pump set electrically and mechanically, testing for satisfactory working complete all as specified and directed.
Note: - Dead flanges with nuts, washers and gaskets etc shall be provided by the contractor and unit rate quoted shall deemed to include the cost of the same. | 1 | Each job | 33,900 ₹33,900 | 36,000 ₹36,000 | 29,500 ₹29,500 Lowest |
| 5.00 | Disconnecting the defective Jockey pump set of capacity 20 HP, from the system, shifting to civil workshop, dismantling the pump and removing defective/worn out parts like ball bearings, impeller nut, gland packing shaft sleeves, GM bushes, gaskets set, GM impeller and reassembling the pump by replacing the unserviceable parts with new ones, transporting to site and refixing at original position, and connecting the pump set electrically and mechanically, testing for satisfactory working all as directed.
Note:- Cost of minor spares like washers grease, cotton waste, gasket set, gland packing etc shall be deemed to include in the unit rate quoted and shall not be paid extra. | 1 | Each job | 15,700 ₹15,700 | 16,600 ₹16,600 | 15,500 ₹15,500 Lowest |
| 6.00 | Repair/maintenance and servicing of electrical operated fire pump of horizontal split casing type with TEFC motor class F insulation of capacity 100 HP,3 Phase 415 volts through the OEM of M/S Kirloskar or authorized dealer of M/S Kirloskar by servicing cleaning all parts and replacing minor spare parts to fire pump and checking functioning of all system and making adjustment for proper working complete all as specified and directed. | 2 | Each job | 12,750 ₹25,500 Lowest | 13,800 ₹27,600 | 13,500 ₹27,000 |
| 7.00 | Repair/maintenance and servicing of Diesel Engine driven pump of split casing type for fire fighting of Cap 85 HP through the OEM of M/S Kirloskar or authorized dealer of M/S Kirloskar by servicing/ descaling of raditor ,cleaning all parts and replacing old filters, oil, coolant, fan belt, aircleaner, lube oil, diesel filter etc and minor spare parts to DG Set and checking functioning of all system and making adjustment for proper working complete all as specified and directed. | 2 | Each job | 33,700 ₹67,400 | 36,500 ₹73,000 | 33,500 ₹67,000 Lowest |
| 8.00 | Repair/replacement of pressure switches as per existing capacity for fire fighting pumping system complete all as specified and directed. | 3 | Nos | 7,200 ₹21,600 Lowest | 8,350 ₹25,050 | 8,500 ₹25,500 |
| 9.00 | Repair/replacement of pressure gauge with range of 0-10 bar alongwith isolation cock and pipe at hydrant station for fire fighting pumping system incluiding all the accessories for fixing complete all as specified and directed. | 4 | Nos | 3,150 ₹12,600 Lowest | 3,550 ₹14,200 | 3,500 ₹14,000 |
| 10.00 | Supply and fixing mechanical joint of size 150 mm dia complete all as specified and directed. | 1 | Each | 10,300 ₹10,300 Lowest | 10,500 ₹10,500 | 10,500 ₹10,500 |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
28 Oct 2025, 6:00 pmClosed
GE (P) AF Digaru
GE (P) AF Digaru PO Digaru Dist Kamrup Assam 782401
REPAIR/MAINT/REPLACEMENT OF UNSV STARTER PANELS, SOFT/DOL/STAR DELTA STARTER, LEVEL SENSORS, PRESSURE GUAGE SWICTH, LT PANELS AND WATER DISINFECTORS FOR FIRE FIGHTING SYSTEM, JOCKEY/DIESEL ENGINE DRIVEN PUMP AND OTHER MISC WORKS AT AFS DIGARU.
2025_MES_734438_1
C/8840/E8 of 2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
Digaru
Please ref Tender Documents
6 documents required · 6 mandatory
₹500
GE (P) AF Digaru
₹50,000
Yes
27 Dec 2025
9 Oct 2025
4 Nov 2025
9 Oct 2025
28 Oct 2025
23 Oct 2025
Amount
M&L for painting of electrical operated fire pump of horizontal split casing type with TEFC motor class F insulation of capacity 100 HP,3 Phase 415 volts ,including suction and discharge pipe line and air cushion vessel with drain and safety valves of appx length 2.5 mtr long and 250 mm dia MS pipes and painting of all valve controls(all types of valves and pipe lines in fire fighting room) with scrapping the existing paint with wire brush and painting with two coats of synthetic enamelled spray paint of existing colour of superior quality after making good to existing painted surfaces complete all as specified and directed.
Material and labour for painting of Diesel Engine driven pump of split casing type of cap 85 HP with connected pipe lines with scrapping the existing paint with wire brush and painting with two coats of synthetic enamelled spray paint after making good to existing painted surfaces complete all as specified and directed.
Material and labour for painting of Jockey pump of 500 LPM with TEFC squirrel cage motor class F insulation of cap 20 HP with connected pipelines by scrapping the existing paint with wire brush and painting with two coats of synthetic enamelled spray paint after making good to existing painted surfaces complete all as specified and directed.
Disconnecting and dismantling the electric motor of defective Jockey pump set of capacity 20 HP,3 Phase 415 volts from the foundation by disconnecting earthing connection, shifting to civil workshop and removing burnt out windings, cleaning the slots, rewinding with super enamelled copper winding wire as per existing gauge and size, varnishing and heating complete, transporting to site and refixing at original position, and reasembling with pump, replacing the ball bearings as per existing size and make, connecting with pump set electrically and mechanically, testing for satisfactory working complete all as specified and directed. Note: - Dead flanges with nuts, washers and gaskets etc shall be provided by the contractor and unit rate quoted shall deemed to include the cost of the same.
Disconnecting the defective Jockey pump set of capacity 20 HP, from the system, shifting to civil workshop, dismantling the pump and removing defective/worn out parts like ball bearings, impeller nut, gland packing shaft sleeves, GM bushes, gaskets set, GM impeller and reassembling the pump by replacing the unserviceable parts with new ones, transporting to site and refixing at original position, and connecting the pump set electrically and mechanically, testing for satisfactory working all as directed. Note:- Cost of minor spares like washers grease, cotton waste, gasket set, gland packing etc shall be deemed to include in the unit rate quoted and shall not be paid extra.
Repair/maintenance and servicing of electrical operated fire pump of horizontal split casing type with TEFC motor class F insulation of capacity 100 HP,3 Phase 415 volts through the OEM of M/S Kirloskar or authorized dealer of M/S Kirloskar by servicing cleaning all parts and replacing minor spare parts to fire pump and checking functioning of all system and making adjustment for proper working complete all as specified and directed.
Repair/maintenance and servicing of Diesel Engine driven pump of split casing type for fire fighting of Cap 85 HP through the OEM of M/S Kirloskar or authorized dealer of M/S Kirloskar by servicing/ descaling of raditor ,cleaning all parts and replacing old filters, oil, coolant, fan belt, aircleaner, lube oil, diesel filter etc and minor spare parts to DG Set and checking functioning of all system and making adjustment for proper working complete all as specified and directed.
Repair/replacement of pressure switches as per existing capacity for fire fighting pumping system complete all as specified and directed.
Repair/replacement of pressure gauge with range of 0-10 bar alongwith isolation cock and pipe at hydrant station for fire fighting pumping system incluiding all the accessories for fixing complete all as specified and directed.
Supply and fixing mechanical joint of size 150 mm dia complete all as specified and directed.
Supply and fix in replacement of sluice valve 100 mm dia ISI marked PN 1.6 IS-14846 flanged both ends with brass spindle,CI hand wheel complete with all necessary nut bolts rubber gasket etc. complete all as specified and directed.
Supply and fix in replacement of sluice valve 150 mm dia ISI marked PN 1.6 IS-14846 flanged both ends with brass spindle,CI hand wheel complete with all necessary nut bolts rubber gasket etc. complete all as specified and directed.
Supply and fix in replacement of sluice valve 200 mm dia ISI marked PN 1.6 IS-14846 flanged both ends with brass spindle,CI hand wheel complete with all necessary nut bolts rubber gasket etc. complete all as specified and directed.
Supply and fix in replacement of sluice valve 80 mm dia ISI marked PN 1.6 IS-14846 flanged both ends with brass spindle,CI hand wheel complete with all necessary nut bolts rubber gasket etc. complete all as specified and directed.
Taking down unservicable battery charger with Auto panel of 85 HP fire fighting diesel engine and replacing the same as existing model and make complete all as specified and directed.
Taking down old unservicable starter from the 85 HP fire fighting diesel engine and replacing the same as existing model and make (Bosch) complete all as specified and directed.
Supply and fixing in repair Non return CI valve with GM working parts of 200 mm dia for fire fighting line same as existing size and model with nut, bolts, rubber gasket etc. ISI marked IS- 5312 complete all as specified and directed.
Supply and fixing in repair Double flanged swing check valve (Non return) with GM working parts 150 mm dia for fire fighting line same as existing size and model with nut, bolts, rubber gasket etc. ISI marked IS- 5312 complete all as specified and directed.
Supply and fixing in repair Double flanged swing check valve (Non return ) with GM working parts 80 mm dia for fire fighting jockey pump same as existing size and model with nut,bolts,rubber gasket etc ISI marked IS- 5312 complete all as specified and directed.
Removing of old unservicable delivery canvas fire hose of sizes 63 mm dia 30 mtr long including male and female coupling of brass from the fire cabinet and replacement with new of same size, ISI marked including testing & commissioning complete all as specified and directed.
Supply and fix in repair auto air release valves with bolts, nuts and rubber insertion etc. complete size of 25 NB for fire fighting complete all as specified and directed.
Supply & fixing in repair fire hydrant landing valve type B double headed outer of 63 mm female instantaneous outlet with cap and chain conforming to IS 5290 to meet the existing size complete all as specified and directed.
Supply and fixing in repair gun metal branch pipe 63 mm dia male and female threaded outlet with hexagonal base bore with 12.5 mm nozzle conforming to IS 903 to meet the existing size complete all as specified and directed.
M&L for painting of fire cabinet including valve, pipes as existing colour with two coats of synthetic enamel paint by spray painting and removal of existing paint by hand scrapping preparing the surfaces by sand paper and cleaning the surface and making good damaged surface by denting,welding, grinding all as required for completion of job complete all as specified and directed.
M&L for replacement of the following items from the existing panel board with replacing the u/s including disconnecting/connecting all the cable/bus bars connections for input and output supply with necessary jointing materials complete all as specified and directed. Note : The make should be of the same size as of existing MCCB to match with existing frame size.
MCCB 400 Amps, 3 pole 50 KA breaking capacity, adjustable thermal & adjustable magnetic setting, incluiding spreader and mounting accessories complete all as specified and directed.
MCCB 250 Amps,3 pole 36 KA breaking capacity,adjustable thermal & adjustable magnetic setting, incluiding spreader and mounting accessories complete all as specified and directed.
MCCB 100Amps, 3 pole 36 KA breaking capacity ,incluiding spreader and mounting accessories complete all as specified and directed.
MCCB 63 Amps, 3 pole , 25 KA breaking capacity incluiding spreader and mounting accessories complete all as specified and directed.
MCCB 125 Amps TP 25 KA 415 volts incluiding spreader and mounting accessories and making all connections complete all as specified and directed.
Taking out operating levers/locking nut of brass from coupling and replacement with new of existing sizes complete all as specified and directed.
M & L sodium hypochlorite for chemical dosing pump complete all as specified and directed.
M & L Soda Ash for chemical dosing pump complete all as specified and directed.
M & L for PCC 1:4:8 type D2 using 40 mm graded aggregate in foundation above GL incluinding breaking existing PCC and removing from site complete all as specified and directed.
M & L for PCC 1:2:4 type B1 using 20 mm graded aggregate in foundation above GL incluinding breaking existing PCC and removing from site complete all as specified and directed.
S & F Rubber mat of 1 mtr x 2 mtr x 10 mm, with IS certified make.
S & F Rubber mat of 1 mtr x 2 mtr x 6 mm, with IS certified make.
Removal of existing old gravel and sand and refilling with New media of same existing size from bobbing wound filters (pressure sand filter consist gravel 105 kg e, white filter sand 210 kg, Quartz sand 105 kg), (MGF Filter consist Gravel 70 Kg, white filter sand 35 kg, Mno2 25 Kg, Anthracite 25kg, Treated Sand 35 kg), (ACF Filter Consist Gravel 70 Kg and Activated Carbon 75 Kg) unit at TP area, servicing of waters softing plants (including the minors parts) and Disposal of Old media out side of defence land complete all as specified and directed.
Material and labour of engine oil of suitable grade complete all as specified and directed.
Material and labour of Coolant suitable for diesel engine and DG set complete all as specified and directed.
Excavation in trenches in any type of soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables, Foundation filling of poles or stays complete all as specified and directed.
Returning filling, in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm each all as required complete all as specified and directed.
Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
M&L for sand cushioning to under ground cables complete all as specified and directed.
M&L for Sub class ‘B’ bricks old size laid dry flat over the cable width of protection shall be equal to length of brick all as required complete all as specified and directed.
Supply, laying connecting and testing XLPE insulated, PVC sheathed, armoured LT electric power UG cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade, cross sectional area 120 Sqmm, 3.5 core laid through duct/ pipe / in trench etc. including cable glands & lugs and taking up/down the old unserviceable cable complete all as specified and directed. NOTE : Excavation and earth work will be measured and paid separately.
Dismantling existing unsv LT panel of pump motor from MES Complex and Supply install commissioning and testing of factory made type, dust and vermin proof, totally enclosed control panel indoor type CPRI factory approved, fully compartmentalised type , fabricated out of 3.15 mm thick CRCA sheet, duly painted with epoxy powder coating after 9 tank chemical treatment process, with IP-65 & IP-66 Protection complete, provn of front Double door shutter with locking arrangement mounted on MS angle iron frame of 50x50x6 mm and legs grouted on PCC foundation 30 CM below the ground and 20 CM above the ground complete all as specified & directed comprising of following :-
(i) Copper Bus bar TPN 200 Amp of suitable length and section covered with coloured heat shrinkable anti track insulation tape of Make Denson/M-seal or equivalent of finished thickness not more than 1mm and fixed on epoxy base post insulator of both dia and height not less than 40mm- 01 Set. (ii) MCCB 125A, 36 KA, 415V, 4 pole- 01 Nos. (iii) MCCB 100 Amp Ics 25 KA , 4 Pole, 415 V, 50 Hz, with thermal, magnetic and microprocessor release adjustable-1 Nos. (iv) MCCB 63 Amp TPN, 16 KA- 1 Nos. (v) Indicator lamp RYB- 1 Set. (vi) Multifunction meter digital compatible to measure voltage, current, PF, frequency with 3 lines display LCD in 96 x96 sqmm flush mounted case, accuracy class 1.0- 01 No. (vii) Fully automatic Star delta starter 30 HP, 415 V, 50 Hz with suitable overload protection, contactors, phase reversal protection, single phase preventor etc - 01 Nos. (viii) Danger notice plate riveted on the outer body 440 volt. (ix)- Ameter suitable for starter
Note: (a) All existing and new connections of incoming/outgoing cables shall be done through appropriate size of copper thimbles (b) GA Drawing and bill of materials for panel shall be approved by GE before fabrication
Dismantling existing unsv LT panel of pump motor from RSPH High Lift and Supply install commissioning and testing of factory made type, dust and vermin proof, totally enclosed control panel indoor type CPRI factory approved, fully compartmentalised type , fabricated out of 2 mm thick CRCA sheet, duly painted with epoxy powder coating after 9 tank chemical treatment process, with IP-65 Protection complete, provn of front Double door shutter with locking arrangement mounted on MS angle iron frame of 50x50x6 mm and legs grouted on PCC foundation 30 CM below the groud and 20 CM above the ground complete all as specified and directed comprising of following :-
Note : (a) All existing and new connections of incoming/outgoing cables shall be done through appropriate size of copper thimbles (b) GA Drawing and bill of materials for panel shall be approved by GE before fabrication
Supply & fix in replacement water level indicator for OH Tank and Semi UG sumps complete with multistranded steel rope PVC float ball, pulley clamp, nut bolts washer including water level indicator board of MS angle iron, column pipe and MS plate for frame including writing letter for water level with white paint on black surface complete all as specified & directed.
Supply, connecting & fixing of GI pipe dia 100 mm Light grade for cable protection in road crossing complete all as specified & directed.
M & L for making stand post for testing of flow of chlorine content in water, by means pipe PPR dia 15 mm with all fittings-20 RM, Brass bib cock dia 15mm-01No with suitable PCC M-15 foundation of size 30x30x75 cm high including making Ferrul to outlet connection from existing pipe GI/CI/DI upto 150mm bore complete all as specified & directed.
Supply, lowering & fixing 10.0 mm dia flexible PVC coated steel rope - 40 RM for holding submersible pump inside the casing pipe and fixed outside at the mid of MS channel with provision of 01 no pulley incluiding taking out old UNSV one complete all as specified & directed.
Supply, lowering & fixing 10.0 mm dia flexible PVC coated steel rope - 20 RM for holding submersible pump inside the casing pipe and fixed outside at the mid of MS channel with provision of 01 no pulley incluiding taking out old UNSV one complete all as specified & directed.
Supply and fixing in repair Fencing Chain link Net for Fenceing Mesh 4 Feet x 4 feet in height, 12 Gauge wire fixed with MS channel incluinding all accessories complete all as specified & directed.
Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead strip 32 X 6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion and taking out old UNSV one complete all as specified & directed.
Supply and fixing in repair glow Sign board box type of size 4ft x 4 ft with base frame made from angle iron and backside from ACP sheet 3mm thick with IP protection for outdoor use, acrylic sheet thickness blue colour fixed on 40 mm GI Pipe medium grade including earthwork, PCC grouting work, up to height 2.5 mtr from ground level including LED tube rod,electric connection and marking computer printing MES logo and and following in English block capital letters on the surface of the board white letter suitable sizes complete all as specified & directed :- (i) MES, GE (P) AF DIGARU RSPH LOW LIFT (ii) MES, GE (P) AF DIGARU RSPH HIGH LIFT (iii) Filtration plant, MES, GE(P) (AF) RSPH (iv) Jackwell , Low lift , RSPH (v) New filtration plant, HQ pump house (vi) Buster Pump House HQ Area
Taking out the Doser pump set capacity 0.5 HP or 1 HP along with motor from the water circulating system of water treatment plant by disconnecting electrically and machanically, shifting to civil workshop, dismantling the same to remove burnt out windings and defective parts, rewinding the motor with super enemelled copper winding wire incl all insulating materials all as per existing, varnishing/drying etc complete and replacing the bearings/bushes as per existing size, replacing the pump impeller, reassembling the same, shifting to original site, reconnecting electrically and mechanically and testing for proper working for doser pump complete all as specified & directed.
Taking out the Doser pump defective/ leakage tank (alum , lime , polymer etc) capacity 200 or 300 ltr and replacement of same size tank in Doser system incluiding connecting and disconnecting piping system and testing for proper working for doser pump complete all as specified & directed.
Supply and fixing in repair CPVC(Chlorinated Poly Vinyl Chloride) SDR-11 pipe line of dia 25 mm ISI marked including all accessories i.e Bend, tee, socket, union, reducer socket, male/ female adapter etc. complete all as specified & directed.
Supply and fixing in repair CPVC(Chlorinated Poly Vinyl Chloride) ball valve of dia 25 mm ISI marked including all accessories i.e Bend, tee, socket, union, reducer socket, male/female adapter etc complete all as specified and directed.
Repair/ replacement of old unserviceable spares for chemini jet - RM Series Chemical dosing pump fitted with 0.5 hp 220/440 volts 200 LPH AC TEFC type complete all as specified & directed. (Make: Crompton greaves, RMCO or equivalent approved make)
Injection Check Valve
Coupling nut
NRV Spring
LDPE Pipe as per existing size
Supply and fixing in repair surge protection device capacity 40 KA, 3P + N complete all as specified and directed.
Supply and fixing in repair surge protection device cartridge suitable for capacity 40 KA, 3P + N complete all as specified and directed.
M/S RAJA CONSTRUCTION (BID ID -3461405)
M/S DAS CONSTRUCTION (BID ID -3461717)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.40 MB
BOQ_822392.xls
BOQ • 0.59 MB
PS8840.pdf
Tender Documents • 1.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .