Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.3 LAccepted-AOC 15 BOH ROAD DEFENCE ENCLAVE AMBALA CANTT 133001 HR | AMBALA | HARYANA | 133001 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹44.1 L+₹4.3 L (10.9%)Rejected-AOC GARDEN AVENUE PLOT NO 242 243 244 RH 4 SECTOR 21 NERUL NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹44.5 L+₹4.8 L (12.0%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹57.9 L+₹18.2 L (45.7%)Rejected-AOC | L4 | Rejected-AOC Rejected |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
8 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE KARANJA
CWE KARANJA NAVAL STATION KARANJA URAN RAIGAD-400704
CERTAIN REPAIRS TO RAILING, STEPS, BOLLARD AND STRUCTURAL REPAIR TO CONCRETE MEMBERS AT AMN JETTY AT NAVAL STATION KARANJA
2022_MES_551450_1
84180-K/E8
Open Tender
Civil Works - Others
Item Rate
180 days
NAVAL STATION KARANJA
Please refer tender documents
8 documents required · 8 mandatory
₹500
GE (NW) KARANJA
₹1 L
20 Oct 2022
12 Sept 2022
10 Oct 2022
12 Sept 2022
8 Oct 2022
26 Sept 2022
Amount
Chipping, removing carefullly concrete work by low impact hammer, breakar without damaging the structure and cleaning and disposal of debries out side the premises etc., complete all as specified and as directed by Engr-in-charge. Note: Hard concrete should not be removed by force.
Material and labour for clean existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc., complete and applying two coats of alkaline rust converting primer on the rebars, including cleaning the reinforcement, wire brushing to remove loose rust spalls, wash the rebars with clean water within 3 min and wipe it dry complete all as specified and as directed by Engr-in-charge.
Material and labour for applying two coats of epoxy based zinc primer in a span of four hours over the treated rebars and allow to dry for six hours. The application shall be by brush complete all as specified and as directed by Engr-in-charge.
Material and labour for cleaning all loose laitance on the concrete substrate and applying one coat of epoxy bonding agent on exposed concrete surface to ensure bond between old concrete and new concrete by brush application complete all as specified and as directed by Engr-in-charge.
Material and labour for building up the profile of structural members by using latex additives (MONOBOND) modified air cured mortar system (Polymer modified mortar) (1:5:15 = 1 monobond-5Cement-15 sand) in damaged areas in 30 to 40mm thickness including leveling profliling etc., complete all as specified and as directed by Engr-in-charge.
Material and labour for applying concrete protection coating on finished structural members exposed to atmosphere complete all as specified and as directed by Engr-in-charge.
Material and labour for drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep holes. Works shall be carried out as under: (i) Cleaning of holes: Clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles: Insert 12mm dia. Rohibb Teflon nozzles in cleaned holes. External end of nozzles to be machine to receive outlet of grouting gun. Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for min.12 hrs. (iii) Cutting of nozzles: Cut the nozzles by chisel after completion of grouting without damaging structural elements. (iv) In case crack upto 2mm wide, fix the injection nozzels directly over the cracks, at intervals of 6 to 9 inches, using a drilling machine. Fix PVC/MS nozzels in these holes with fast-setting epoxy putty and let it dry for 2 to 3 days. Also, seal the crack between the ports with epoxy putty. (v) In case where the crack is wider than 2mm upto 4 to 5mm, drill holes at the sides of the crack in a staggered fashion, at intervals of 6 inches and affix them with epoxy putty as mentioned above. (vi) Also, seal the face of the carck with a liberal application of the epoxy putty.
Material and labour for injecting of site mixed cement slurry grout, mixed in specified proportion containing cement, sand water with addition of plasticizers and migratory corrosion inhibitors, water cement ratio shall be varied between 0.5 to 1.0 for each hole, shrinkage compensating cement slurry mixed to a lump free fresh creamy consistency, mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Injection of approved/specified grout by means of pump at a pressure of 3-5 Kg/cm2 etc complete till the grout mix flows out from the nozzle indicating complete filling of grout in the holes drilled complete all as specified and as directed by Engr-in-charge.
Material and labour for injecting low viscosity (3-5cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, including, mixing of material as: mixing of material components (part A&B) in the required quantities as per manufacturer's instruction by weigh batching. Grouting: Fill the grouting gun with concrete penetrating corrosion inhibitor EPCO-KP-100. Maintain desired pressure in the gun by air compressor; maintain the pressure at exit (2 to 3kg/cm2) by monitoring pressure guage at exit. Grout the material through prefixed nozzles in the structural elements @ 100ml per nozzle. Repeat the process for all the nozzles complete all as specified and as directed by Engr-in-charge.
Supply and fix for replacement of corroded steel reinforcement mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-charge. Note: Replacement of steel reinforcement with TMT bars of appropriate size where 30% of cross section is reduced including dismantling of rusted steel.
Providing and fixing additional main steel bar or stirrups of designed diameter in various structural elements like column, beams and foundations including drilling, bending, welding and fixing the bars with epoxy putty etc., complete all as specified and as directed by Engr-in-charge. Note: Steel provided on the basis of 1% of volume of concrete.
Providing and applying jacketing around columns with Micro concrete (Molith-MC) M40 including all lifts, shuttering, drilling holes and fixing shear anchor as per specification complete all as specified and as directed by Engr-in-charge. Notes: (i) Reinforcement shall be measured and paid separately. (ii) Rates including jacketing, formwork and micro concrete.
Demolition of cement concrete in ground floor and paving any thickness below or above ground level un-reinforced complete all as specified and as directed by Engr-in-charge.
Material and labour for providing 75mm thick dry lean concrete design mix with minimum cement content not less than 150 Kg/Cum of concrete having average strength of each consecutive group of 5 cubes made in accordance with IS-516, not less than 10 Mpa at 7 days. The proportioning of the material of mix should be as per clause 601.3 of MORTH specifications and as per IRC specifications complete all as specified and as directed by Engr-in-charge.
Supply only polyethene film, black 150 micron laid in floors complete all as specified and as directed by Engr-in-charge.
Material and labour for cement concrete work in pavement/hardstanding of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, compacted thickness of concrete 25 cm including necessary formwork complete all as specified and as directed by Engr-in-charge.
Finishing surface to concrete roads, pavements, by brooming complete all as specified and as directed by Engr-in-charge.
Material and labour for forming 25mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A' thickness of concrete slab 180mm complete all as specified and as directed by Engr-in-charge.
Material and labour for forming contraction (Dummy) joints 50mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified and as directed by Engr-in-charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engr-in-charge.
Material and labour for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and fencing angel similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed by Engr-in-charge.
Supply and fix for MS plate (plane /chequerred) 5mm and over as open drain covers with 2 Nos of 150mm handle in each plate etc complete all as specified and directed.
Supply and fir for rolled section Fe 410-W (Gde E-250 quality A) as in main and cross beams, hip and jack rafters; purlins, vertical post, plates, pipes where connected to common rafter and running rails and fixing with angle cleats or other connection plates also fixing wind tie bars etc., complete all as specified and as directed by Engr-in-charge.
Material and labour for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-charge.
Material and labour for preparation of old steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-charge.
Material and labour for precast factory made RCC 1:1.5:3 (Using 20mm graded crushed stone aggregate) as in cover slab of manholes, septic tanks, drainage, flooring, bedded, and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 with edges of slab covered with MS angle sections or similar articles with plain faces and set in cement Mortar 1:4, including form work and reinforced with 8mm dia TMT steel 100mm c/c both way, size and shape and pattern including dismantling complete all as specified and as directed by Engr-in-charge.
Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc., complete all as specified and as directed by Engr-in-charge.
Material and labour for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean raidus built in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge.
Material and labour for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge.
Supply only water proofing compound ISI marked complete all as specified and as directed by Engr-in-charge.
Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern roof covering complete all as specified and as directed by Engr-in-charge.
Supply and fix in repair 0.5mm thick pre coated thick galvalume aluminium zink coated GI based corrougated steel sheeting or curved shape of any colour having tansile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and as directed by Engr-in-charge. Note: Work shall be carried out on roof at 12-15m height unit rate shall also include quoted by the contractor (non accessible roof).
Supply and fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge. Note: Work shall be carried out on roof at 12-15m height unit rate shall also include quoted by the contractor (non accessible roof).
Supply and fix for MS flat iron wind ties and stays for gutter including securing with bolts and all necessary drilling bolting or riveted etc confirming to Fe 410 or Fe 310 complete all as specified and as directed by Engr-in-charge.
Supply and fix in repair rotational moulded polyethylene (HDPE) water storage tank 2000 ltrs capacity (Cylindrical Vertical with Closed Top), black or white in colour, three layered construction, hoisted and fixed in position all specified in MES Schedule Part-I, including tank nipple, union and lowering of unserviceable water storage tank with float valve of any description including dismantling of existing water tank complete all as specified and as directed by Engr-in-charge.
Material and labour for providing reinforced cement concrete type B-l, 1:2:4 (Using 20mm graded stone aggregate) in railing /parapet for any size including necessary formwork at any height including demolition complete all as specified and as directed by Engr-in-charge.
Material and labour for PCC (1:3:6) type C1 (Using 20mm graded stone aggregate) in coping bed black etc., including necessary form work complete all as specified and as directed by Engr-in-charge.
Material and labour for mild steel TMT bars 6 to 8mm dia and over cut to length bent shape as required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S complete all as specified and as directed by Engr-in-charge.
Material and labour for 60mm machine pressed pre casted pressed cement concrete inter locking paver blocks glazed coloured up to 6mm on the top in any shape and size, strength not less than M-35 complete all as specified and as directed by Engr-in-charge.
Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed by Engr-in-charge. Note: Only punned thickness shall be measured for payment.
Material and labour for PCC 1:4:8 type D2, (Using 40mm graded stone aggregate) 75mm thick as in sub base of flooring complete all as specified and as directed by Engr-in-charge.
Supply and fix in repairs precast cement concrete manhole/ drain cover of size 600x600x50mm thick arounded with steel strip 50x1.25mm reinforced as per manufacturer's design in manufactured process laid over existing drain complete all as specified and as directed by Engr-in-charge.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and removal to out of MoD land complete all as specified and as directed by Engr-in-charge.
Material and labour for stainless steel 304 grade framed work fancy /ornamental type in hand rails in stairs, baluster and posts, stair hosing gate work and other similar works including all or any type of welding followed by buffering and polishing for smooth finish inclusing dismantling of existing complete all as specified and as directed by Engr-in-charge.
Supply and fix for vitrified ceramic coloured tiles 10mm thick (square /rectangular) polished area of each tile not exc 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed by Engr-in-charge.
Material and labour for 10mm thick glossy finish vitrified tiles for parking/ path (square/ rectangular) area of each tile exc 0.18 sqm but not exc 0.36 sqm in floors etc., set and jointed in neat cement slurry and jointed in white /coloured cement to match over and including 10mm thick screed bed in cement mortar in 1:4 complete all as specified and as directed by Engr-in-charge.
Material and labour for glazed ceramic coloured designer concept tiles matching with existing tile 450x350x7mm size as in walls set and jointed in neat cement slurry over 10mm thick recuing in cement mortar 1:4 and pointed in coloured cement to match for work on vertical surface such as skirting dado etc., complete all as specified and as directed by Engr-in-charge.
Taking down cement plaster on brick walls or stone walls etc., including racking out joint, hacking for key, scrubbing down with water etc., including removing debries directed for a distance max upto 500m complete all as specified and as directed by Engr-in-charge.
Demolition of precast concrete block masonary built in cement mortar including all quoins, arches, pillars etc., and precast concrete articles complete all as specified and as directed by Engr-in-charge.
Material and labour for precast cement concrete block masonry with solid blocks in 10cm in width in type B1 1:2:4 (Using 20mm graded stone aggrgate) and setting in mortar 1:6 complete all as specified and as directed by Engr-in-charge.
Material and labour for ready mix plaster for rendering 15mm thick on fair faces of brick /concrete surfaces in CM 1:4, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. Note: WPC will be measured and paid separately.
Material and labour for ready mix plaster for rendering 10mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:6 finished even and smooth (with out using extra cement) complete all as specified and as directed by Engr-in-charge.
Material and labour for ready mix plaster for rendering 5mm thick on ceilings in cement mortar 1:3 and finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.
Material and labour for three coats of white wash on newly plastered surfaces of ceilings including preparation of surface complete all as specified and as directed by Engr-in-charge.
Material and labour for preparation of newly plastered surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint plain or camouflage pattern on one coat of primer complete all as specified and as directed by Engr-in-charge.
Material and labour for applying 3mm thick wall care putty on new or old plastered surface and prepare the smooth surface with sand paper and applying two coats of oil bound distemper on walls complete all as specified and as directed by Engr-in-charge.
Material and labour for preparation of old plastered surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint plain or camouflage pattern on one coat of primer upto 4 storey inculding necessary scaffolding complete all as specified and as directed by Engr-in-charge. Note: work shall be carried out on the pillar below the bridge in marine area unit rate shall aslo include quoted by the contractor (non accessile).
Supply and fix in repair rotational moulded polyethylene (HDPE) water storage tank 1000 ltrs capacity (Cylindrical Vertical with Closed Top), black or white in colour, three layered construction, hoisted and fixed in position all specified in MES Schedule Part-I, including tank nipple, union and lowering of unserviceable water storage tank with float valve of any description including dismantling of existing water tank complete all as specified and as directed by Engr-in-charge.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .