8697 REPAIR REPLACEMENT OF OT SENSOR DOOR WINDOW SCRUB STATION SIGNAGES AND OTHER ANCILLARY ITEMS OF HOSPITAL BUILDING UNDER AGE B R III OF GE SOUTH PUNE

Amount

M&L for 600x1200x10mm thick vitrified tiles as in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 20mm thick screed bedding in cement mortar 1:6, including dismantling old existing floor & screed bedding of any type and and rubbish off the premises, complete all as specified and directed.

M&L for 600x1200x10mm thick vitrified tiles as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick screed bedding in cement mortar 1:3 including triangular filleting at top in CM 1:4, including dismantling old existing skirting & backing coat of any type and removal of debries, dismantled materials & rubbish off the premises, complete all as specified and directed

M&L for non - skid Ceramic coloured tiles of size 400x400x7 to 8 mm thick (square/rectangular) , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in CM 1:6 including dismantling of existing floor, hearth or wall tiling and screed bedding of cement mortar and rubbish off the premises, complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 600x300x 7-8mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick backing coat in CM 1:3 including triangular filleting at top in CM 1:4 including dismantling of old unserviceable tiles including backing coat of any type and removal of debries, dismantled materials & rubbish off the premises, complete all as specified and directed.

M&L for machine cut cudappah stone slab 30-40mm thick, one side pre-polished, laid over and including 20mm thick screed bed in CM 1:6, set and jointed in grey cement slurry mixed with pigment to match the shade of slab including grinding, rubbing and polishing etc, including dismantling of old existing stone slab & screed bed and removing of debries etc. complete all as specified and directed by Engineer-in-Charge.

M&L for 16-18mm thick granite slab, pre polished (of any type/colour) work (table rubbed and polished) as in steps, pillars, window cills / jamb, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as counters of any radius etc laid over and including 20mm thick screed bed in CM 1:4 including dismantling of existing stone slab & screed bed of any description and removing rubbish / debries etc. complete all as specified and directed.

M&L for 16-18mm thick granite slab, pre-polished (of any type/colour) work (table rubbed and polished) as in skirting and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as counters of any radius etc laid over and including 10mm thick screed bed in CM 1:3 including dismantling of existing stone slab & backing coat of any description and removing rubbish / debries etc. complete all as specified and directed.

M&L for machine cut kota stone slabs, 20-25 mm thick as in flooring laid over and including 20mm thick screed bed in CM 1:6, set and jointed with neat grey cement slurry mixed with pigment to match the shade of slab including rubbing, grinding and polishing etc. including dismantling of existing stone slab & screed bed and removing of debries etc complete all as specified and directed by Engineer-in-Charge. Note:- The size of kota stone slab shall not be less than 550mmx550mm (cut size except the location where balanced.)

M&L 12-15 mm thick machine cut kota stone slab, single piece as in steps, riser, dado or skirting etc and other similar work laid over and including 10mm thick screed bed in CM 1:3, set and jointed with grey neat cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding & polishing etc. including dismantling of existing stone slab & backing coat and removing of debries etc complete all as specified and directed by Engineer-in-Charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed

Material & Labour for wall paneling with 12 mm thick BWR plywood, one side laminated with 1mm thick decorative laminate including wooden frame work of 2nd class HW battens of size 125mm x 40mm fixed with screws including dismantling of old unserviceable paneling complete all as specified and directed by Engr-in-Charge

S&F 5.5mm thick sheet glass ordinary quality fixed with aluminium glazing clips and gasket exc. 0.5 Sqm in each pane complete all as specified and directed

S&F in repairs brass spindle 01 number or 03 number suitable for 15mm bib cock / stop cock / angle cock / CP piller cock, complete all as specified and directed.

S&F 12mm thick toughened glass frosted as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes as required complete all as specified and as directed

S&F of stainless steel top pivot glass patch fitting of size 1.5mm and 150mm length for fixing of glass door complete all as directed.

S&F of Stainless steel ‘H’ type handle 800mm length and 32mm dia suitable for glass door complete all as directed

M&L for 12mm thick prelaminated particle board, exterior grade, prelaminated one side with both side decorative choice lamination & other side balancing white lamination, fixed with screws to timber/ aluminium frame work complete all as specified and directed

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain coloured flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as per direction of Engineer-In- Charge. Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door / window / Ceosetory windows & other Frames / Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Mild steel hold fast / lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F of 75mm long mild steel butt hinges, medium weight and fixed, complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section and fixed, 200mm long, complete all as specified and directed.

S&F in repairs aluminium, anodised, barrel tower bolts of extruded section and fixed, 200mm long, complete all as specified and directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F in repairs 150 mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F 300mm length of bolt, aluminium alloy, anodised, sliding door bolts with hasp staple (bolt type) anf fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy, complete all as specified and directed.

S&F in repairs 300mm length of bolt, aluminium alloy, anodised, sliding door bolts with hasp staple (bolt type) anf fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy, complete all as specified and directed.

S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, 100mm long complete all as specified and as directed

S&F in repairs elbow operated pillar tap cast copper alloy, brass chromium plated, screw down, single leaver surgical purpose with extended operating lever of cat ID-FLR-5031N of "Jaquar" or of equivalent cat part in CERA or Hindware makes complete all as specified and directed.

S&F in repair chromium plated sensor pillar tap superior quality including all necessary arrgangement complete, Make:- CERA F-6010109 or equivqlent cat part from the makes as mentioned here-in-after complete all as specified and directed

S&F in repairs 2mm thick PVC fibre mirror cabinet of size 450x325x120mm and fixed to wall after taking down old mirror, complete all as specified and directed. Make- CERA or Equivalent make

M&L for rendering 10mm thick in cm 1:6 on Brick / Concrete surfaces as in walls finished even and smooth without using extra cement including taking down of old existing cement plaster from brick / block walling including raking out joints, hacking for key, scrubbing down with water etc and removing debries and rubbish off the premises, complete all as specified and directed

M&L for preparation of new plastered surfaces and applying two coat of plastic emulsion paint on wall over a coat of primer complete all as specified and directed.

Supply and fixed of surgical wall mounted scrub sink elbow operated made of stainless steel 304 and of size 1220x482x570mm suitable for OT with and including elbow operated pillar tap, waste coupling and waste pipe and fitting including fixing to wall and connecting union to pipe including taking down of old sink etc. complete all as specified and directed.

M&L for providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for frames of doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

M&L for providing and fixing of powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F anodised powder coated grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design /pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete including dismantling of existing un-serviceable grill and removing from the site complete as direction by Engr-in-charge.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling of old unserviceable mild steel railing, complete all as specified and directed

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed.

S&F 5.5 mm thick sheet glass, ordinary quality fixed with aluminium glazing clips and gaskets in square exc. 0.5 Sqm in each pane, including hacking out old broken glass if any (any thickness, quality & size), complete all as specified and directed.

S&F 4.80mm thick sheet glass ordinary quality fixed with aluminium glazing clips and gasket exc. 0.50 Sqm in each pane complete all as specified and directed.

S&F sheet glass 4 mm thick frosted ordinary quality, exc. 0.50 Sqm in each pane and glazing with oil putty or glazing pins / spring clips with steel frames complete all as specified and directed

S&F sheet glass 4 mm thick ordinary quality exc. 0.50 Sqm in each pane frosted on one side and glazing with oil putty or glazing pins / spring clips with steel frames including hacking out of existing broken glass all as specified and directed

S&F in repairs of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

S&F in repairs aluminium (Extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as specified and directed.

S&F in repair Floor door stopper of aluminium alloy body double tongue anodized with rubber shoe and fixed of size 140 mm complete all as specified and as directed

S&F in repairs CP Wall mixer 3-in-1 for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore of pipe complete all as specified and directed.

S & F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed

S & F in repairs 15 mm chromium plated 2 way bib cock fancy type with wall flange complete all as specified and directed.

S&F in repairs wash hand basin CP brass mixer suitable for mixing of hot & cold water as approved pattern, screwed down for 15mm dia iron pipe, complete all as specified and directed by Engineer in charge. Make : CERA or Equivalent make

S & F in repairs CP health faucet (ABS Body) with 1.00m long flexible rod complete all as specified and directed.

S& F in repair 5mm thick sheet glass corner shelf, 250mm radius including CP railing and CP brackets, complete all as specified and directed.

S&F in repairs mild steel chromium plated grating (round) 125 mm dia fixed over floor / nahani trap (with hole OR without hole), complete all as specified and directed.

S&F in repairs CP towel rail 600 mm long 20mm dia fixed with plastic guities with steel screws etc., complete all as specified and directed. by Engineer in charge..

S&F in repairs soap dish brass chromium plated fixed with brass screws, complete all as specified and directed.

S&F in repairs towel ring with round flange (Medium) of chrome plated of “Jaquar” make, Model No ACN-CHR-1121BN (or equivalent cat part from the make as mentioned here-in-after) mirrored finish fixed with and including brass screws and wooden/plastic cleats fixed complete all as specified and directed.

S & F in repair angle cock, fancy type, 15mm bore brass chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs vitreous china counter top wash hand basin (excluding taps, waste, pipe chain and plug) but including fixing on granite platform complete all as specified and directed. Make - CERA Catmid S2020158 or equivalent cat part from the makes as mentioned here-in-after Note:- Granite support and top shall be measured and paid separately.

S&F vitreous china squatting pan (Orissa pattern) long pan including provision of lime concrete bedding fixed in repair of size 580x440mm white including with intergral foot rest with 'P' or 'S' trap complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of plastic emulsion paint complete all as specified and directed

M&L for preparation of surfaces of walls and applying 2mm thick wall care putty on walls including rubbing with sand papered to make surfaces even and smooth complete all as specified and directed.

M&L for complete removal or existing treatment of walls and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and directed

S&F in repairs 32mm bore, 75 cm long PVC waste pipe suitable for WHB complete all as specified and direcetd.

S&F in repairs 40 mm bore and 75 cm long PVC/waste pipe suitable for sink complete all as specified and directed.

S&F in repapir plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover including mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs viterous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and directed.

S&F in repairs vitreous china ceramic white single piece WC (S or P trap with UF soft close seat cover , hinges, accessories set, size 365x655x765 mm, product Code : LYS-WHT-38851SSM of Make-“Jaquar” or equivalent cat part in makes as mentioned here-in-after, complete all as specified and directed.

M&L for CORESEAL 357A/CORESEAL 357 CAT and CORESEAL - 135A/CORESEAL 135B for carrying out non destructive water proofing treatment to sunken portion slab floor and walls of BATH,WC, WHB and floor traps (combined unit) by using construction chemical methods such as, 1) HYDROPHOBIC PU GROUTING 2) EPOXY COATINGS etc. incl. cleaning of surface with wire brush detecting the sources of leakages and making hole and fixing the metallic packer for injecting hydrophobic PU foam and sealer as per manufacturers instruction (Average :1 metallic packer per Sqm) complete all as specified and directed by Engr-in-Charge. (Make : Build core chemicals or equivalent)

S&F in repair for LED sign Board of acrylic white MS, power with battery backup of 12X6 inch of unbreakable, flame and scratch resistant to be fixed as directed by Engineer-in-Charge

S&F in repairs brass spindle 04 number and 05 number suitable for 15 mm wall mixer / WHB Mixer /Sink Mixer / CP pillar cock, complete all as specified and directed.

S&F in repairs 15mm bore bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repairs 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs PVC connection pipe 450mm long with 2 Nos. brass check nuts suitable for 15mm bore of pipe with washer etc. complete all as specified and directed.

S&F in repairs PVC connection pipe 600mm long with 2 Nos. brass check nuts suitable for 15mm bore of pipe with washer etc. complete all as specified and directed.

S&F in repairs stop cock ISI Marked cost copper alloy, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15mm bore complete all as specified and directed.

S&F in repairs angle valve cost copper alloy, chromium plated screw down high pressure with crutch handle screwed both ends suitable for iron pipe of 20mm bore, complete all as specified and directed.

S&F in repairs shower rose chromium plated brass fancy type 125x125 mm with or without swivel any size, including fixing to steel pipe or union, complete all as specified and directed.

S&F in repairs waste coupling, brass chromium plated 32mm dia suitable for WHB, complete all as specified and directed.

S&F in repairs waste fitting (coupling) brass chromium plated 40 mm dia suitable for sink, complete all as specified and directed.

S&F in repairs 10 Itrs capacity PVC (White) valve less syphonic action type, flushing cistern, low level with inlet ball valve float, handle. aluminium brackets for bottom support fixing with gutties embeded in wall with drilling machine etc complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge / thickness in roof covering etc, complete all as specified and directed.

S & F roof sheeting pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S&F for rolled mild steel conforming to grade E-250 (Fe-410W, quality A) as in post, main and cross beams, hip and jack rafters, purlins, where connected to common rafters and running rails and guides for sliding doors, fixed with angle clips or other connecting plates complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description exc. 10 cm width or girth, including preparation of new steel surfaces, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces exc. 10 cm width or girth, including preparation of surfaces, complete al as specified and directed.

S&F GI frame work for seamless ceiling comprising of GI Perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mmcentre to centre with GI cleat and steel expansion fasteners with and including ceiling section(n. exc. 1.2m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26mmeach with lips of 105mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre with hangers 6 mm dia. G.I. (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including dismantling and removal of old existing unserviceable ceiling and boards complete all as specified and directed.

S&F in repairs 8mm thick seamless calcium silicate made out of 1800x1200mm size board of siliceous and calcareous material reinforced material with cellulose fiber fixed to the ceiling section with 25mm long self drilling and tapping screws having philips head with under head cutter at 200mm centre to centre including finishing the joint of face board with specially formulated jointing compound and 48mm wide fiber tape to provide seam less finish complete all as specified and directed.

S&F in repairs mortice lock, 4 lever of brass finish, vertical type of 100mm size, complete all as specified and directed.

S&F in replacement the following accessories suitable for Auto sliding doors of OT in New Command hospital for efficient and effective performance of the doors etc., complete all as manufacturer's instructions and directed by Engr-in charge. Make - WIESPL, Pune or equivalent make as approved. (a). SDA04 DC Controller

(b). DC Motor:

(c). Motor Pulley:

(d). Battery: 24V

(e). Adaptor for DCB controller

(f). Teeth belt

(g). Photo cell

(h). Foot sensor: IR based sensor for Sliding of Door

S&F in replacement the following accessories suitable for swing doors of OT in New Command hospital for efficient and effective performance of the doors, complete all as manufacturer's instructions and directed by Engr-in charge. (a). Door closer : Automatic door closer with soft closing, rated for 65kgs, Make: Apar or equivalent

(b). Hinges : SS 304 construction, size: 4 Inch x 3 Inch Make: Apar or equivalent

(c). Tower Bolt : Concealed Tower Bolt, SS 304 Construction, Make: Apar or equivalent

(d). Door Handle : SS 304 Construction, length 250mm x 22mm Dia, Make: Apar or equivalent

(e). Drop seal : Automatic drop seal, Size as per length of door, make: WIESPL or equivalent

(f). Gaskets : Rubber Gaskets for an airtight seal. Make: WIESPL or equivalent

(g). View panel : size 400mm x 600mm, 5mm Glass on both side with vaccum chamber, Make: WIESPL or equivalent

(h). Door lock: Concealed door lock, SS 304 finish, Make: Apar or equivalent

Taking down chowkats or frames with shutters (without taking off shutters from frame) exc. 1.50 Sqm but not exc. 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed.

Taking down shutter of any description exc. 1 Sqm and n. exc. 2 Sqm each complete all as specified and as directed.

S&F in replacement the following accessories of Two way scrub of OT in New Command hospital for efficient and effective performance complete all as manufacturer's instructions and directed by Engr-in charge. (a). Sensor: IR based sensor for handsfree tap activation, Make: WIESPL or equivalent

(b). Foot paddle: SS 304 construction, manual activation of tap

(c). Soap dispenser: Manual Soap Dispenser, SS 304 construction, Make: WIESPL or equivalent

(d). Auto SS304 tap: SS 304 Finish, Automatic Tap, Make Jaquar or equivalent

(e). tap valve: Valve to control flow of water, Make: WIESPL or equivalent

(f). SMPS for Scrub: Power Supply circuit for Sensor, Make: WIESPL or equivalent

S&F in replacement the following accessories suitable for Vinyle Flooring of OT in New Command hospital for efficient and effective performance complete all as manufacturer's instructions and directed by Engr-in charge. (a). Vinyl Patch Removal :Removal of Vinyl flooring by cuting in flooring, Make - WIESPL

(b). Vinyl Patch Installation: Installation of matching shade of Vinyl flooring of identical specifications, Make: Tarkett / Gerfloor / Jeofloor.

(c). Vinyl Patch Welding: Welding using vinyl weilding rods, Make: Tarkett / Gerfloor / Jeofloor.

S&F in replacement the following accessories suitable for Storage Unit OT in New Command hospital for efficient and effective performance complete all as manufacturer's instructions and directed by Engr-in charge. (a). Hinges : SS 304 construction, size: 4 Inch x 3 Inch Make: Apar or equivalent

(b). Tower Bolt : Concealed Tower Bolt, SS 304 Construction, make: Apar or equivalent

(c). Door Handle : SS 304 Construction, length 250mm x 22mm Dia, make: Apar or equivalent

(d). View panel : size 400mm x 600mm, 5mm Glass on both side with vaccum chamber, Make: WIESPL or equivalent

(e). Door lock: Concealed door lock, SS 304 finish, Make: Apar or equivalent

M/s.BAJRANG CONSTRUCTION (BID ID -3309796)

PRANAV ENTERPRISES (BID ID -3305751)

MONA ASSOCIATES (BID ID -3308505)

SARATH ENTERPRISES (BID ID -3310075)

Bright Electricals (BID ID -3316517)

PAL CONSTRUCTION (BID ID -3316552)