HDPE tank Maintanence work at Subbannan Street, Kuppammal Layout, Uppu Kinaru, VivekanandhaHDPE tank Maintanence work at Subbannan Street, Kuppammal Layout, Uppu Kinaru, Vivekanandhar Street,Kosalai Nagarr Street,Kosalai Nagar

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls Brick / Stone Masonry in cement mortar walls under 3m high

Earthwork excavation and depositing on bank within initial lead of 10m and initial lift of 2m as sand silt or other loose soil wet sand light black cotton soil and ordinary soil including excavated earth etc.complete , as per standard specification

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Random Rubble masonry in cm 1:5 (one cement and five sand) for foundation and basement using new rough stone and bond stone and including simultaneous pointing cost and conveyance of all materials etc complete with std., specification.

Brick work in CM 1:5 (one cement & five M Sand) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Plastering with cement mortar 1:5 (one cement five sand) mix to 12mm thick including cost and coveyance of all materials to site finishing curing etc., complete.

Supplying and fixing of Cuddaph slab 35 mm thick including cost and conveyance of all materials etc., complete and labour charges for moulding curing and fixing in position etc. complete as directed by the departmental officer.

Manufacturing supplying and fixing of MILD STEEL DOOR made out of 50 x 50 x 6 mm M.S angle for outer frame,35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets (18 G) with 5Nos, of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase of Double shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers.

Painting two coats with ready mixed plastic emulsion paint of First class quality of approved colour etc., over plastered surface including priming coat and cost and conveyence of all meterials etc., complete as per standard specification.

Painting two coat with synthetic enamel paint of approved quality and colour over new iron work including cost and conveyence of all meterials & labour including cost of primer coat charges etc.,complete.

Supplying, delivery and fixing of HDPE tank 1000 lit capacity as per IS 12701/1996 including all cost and conveyance of all materials etc, complete, as per standerd specifiacation.

Supplyof 32 mm GI pipe of B class of approved quality including all cost and conveyance etc, complete, as per standerd specifiacation.

Supply and fixing of G.I. pipes and Water supply specials etc., complete as per standard specification.32mm GI Coupling

32mm dia GI cutting

32mm dia GI pipe Threading

Laying of G.I. Pipes and specials to proper line and level including jointing but excluding cost of pipes and jointing materials for plumbing works for providing water supply and sanitary works in the premises of the building