REPAIR / MAINT OF JOINERY, FLOORING AND PLUMBING WORK, JS AND MES COLONY AT MIL STN SGNR

Amount

Taking down chowkats or frame with shutter (without taking off shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and complet all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames) complet all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each and complete all as specified and directed by Engineer-in-Charge.

Taking down shutters any description exc 1 Sqm but n.exc 2 sqm each, and refixing in the same opening/other opening including easening and adjusting complet all as specified and directed by Engineer-in-Charge.

M& L for Easing & adjusting steel section windows with side hung shutter including projecting type hinges with steel handle and steel peg stay making easily operateble wheather with welding on steel window complete all as specified and directed by Engineer - in - Charge.

S&F second class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complet all as specified and directed by Engineer-in-Charge.

S&F Factory Made for pressed steel frames of size 75 X 60 mm for Cupboard frames with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complet all as specified and directed by Engineer-in-Charge.

S&F Factory Made Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complet all as specified and directed by Engineer-in-Charge.

S&F Factory Made for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complet all as specified and directed by Engineer-in-Charge.

M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in back of pressed steel door frame/chowkhat and fixing of bed block of hold fast etc complet all as specified and directed by Engineer-in-Charge.

S& F in repair 18 mm thick Plywood, grade 2 quality, interior grade, , with one side decorative face veneer on both side fixed with screws to timber frame work as in cupboards, cupboard shelf complet all as specified and directed by Engineer-in-Charge.

S&F 2nd class HW factory made Plain, framed, pannelled shutters 35 mm thick (two panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I) Kiln seasoned and chemically pressure treated complet all as specified and directed by Engineer-in-Charge.

S&F Factory Made 2nd class hardwood glazed skeleton shutters 35 mm thick open rebated and prepared to receive guage etc but divided into squares, with plain chamfered or rounded, metered and riveted sash bars any numbers including necessary beading used for protect the wire mesh also complete all as specified and directed by E-in-Charge. .

M&L for Plain fillets or beading of sectional area Exc 3 & n. exc 6 sq.cm of 2nd class hard wood square, rectangular or triangular in section , clean sawn, se-cured with nails or brads for securing wiremesh or similar works put together with glue pinned at joints in complete all as specified and directed by Engineer - in - Charge.

S&F Factory Made Solid FRP Door Frame of size 90mm x 45mm with single rebate of 32mm x 15mm to receive shutter moulded with fire retardent grade and saturated polyster resin and choped mat door framed shall be 2 mm thick and fill with suitable block in all the three legs the freme shall be covered with fiber glass rom all side MS stay shall be provided at the bottam to steady the frame . as per specification shown on drawings. complet all as specified and directed by Engineer-in-Charge.

S&F for factory made solid panel FRP door shutter shall be 30mm thick (style) glass fibre reinforced plastic panel door shutter of requred colour with fire retardent grade and saturated polyster resin moulded to 3 mm thick FRP liminated for forming hollow rails and style with wodden frame and suitable block of seasoned wood inside at reqd places for fixing of fittings cast monolithically with 5 mm thick FRP panel and conforming to IS 14856:2000. suppling and fixing in the frame at site as per specification shown on drawings. complet all as specified and directed by Engineer-in-Charge.

Dismantling of boarding any description fixed in any position with nails/ screws complet all as specified and directed by Engineer-in-Charge.

S& F in 18 mm thick Plywood, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work as in Kitchen cabinet, cupboard shelf complet all as specified and directed by Engineer-in-Charge.

M&L for 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complet all as specified and directed by Engineer-in-Charge.

S&F 25 mm size magnetic catches with Plastic body and striking plate including letting in and fixed complet all as specified and directed by Engineer-in-Charge.

S&F continuous (piano) hinges 20mm & 12 MM width of flap, mild steel bright finish or electrogalvanised of complete all as specified fixed with CP steel screws complet all as specified and directed by Engineer-in-Charge.

S&F butt hinges of size 100 mm medium weight, stainless steel ISI marked complet all as specified and directed by Engineer-in-Charge.

S&F in repair butt hinges of size 100 mm medium weight, stainless steel ISI marked complet all as specified and directed by Engineer-in-Charge.

S&F aluminium handle, 150mm size, cast type, anodized (ISI marked) complete all as specified.(D type Handle and back side staple) complet all as specified and directed by Engineer-in-Charge.

S&F in repair aluminium handle, 150mm size, cast type, anodized (ISI marked) complet all as specified and directed by Engineer-in-Charge.

S&F 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complet all as specified and directed by Engineer-in-Charge.

S&Fin repair 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complet all as specified and directed by Engineer-in-Charge.

S&F 250 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complet all as specified and directed by Engineer-in-Charge.

S&F in repair 250 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complet all as specified and directed by Engineer-in-Charge.

S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complet all as specified and directed by Engineer-in-Charge.

S&F in repair mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complet all as specified and directed by Engineer-in-Charge.

S&F in repair 150mm length floor door stopper of aluminium alloy body and tongue,anodised with hard drawan steel spring fixed in floor complet all as specified and directed by Engineer-in-Charge.

S & F in repair hasp and staple, safety type of aluminium anodised100mm size fixed with screw complete all as specified and directed by Engineer - in - Charge.

M&L Cutting holes in brick walls built in cement mortar including making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B-1 exc half brick but n.exc one brick complet all as specified and directed by Engineer-in-Charge.

S&F Aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete as per the direction of Engineer-in-charge

S&F Aluminium window (glazed and gauzed both),side hung type without sash bars, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing, clips, rubber packing, anodised aluminium snap beading screws,aluminium fitting such as peg stays 150mm long (01 nos), hinges type B-21 100mm long (02 Nos) suitable handle (01 No) with powder coating of any colour (thickness of powder coating not less than 50micron) etc complet all as specified and directed by Engineer-in-Charge. Note: The Glass and wiremesh will be measured and paid seperately.

S&F 50 micron powder coated aluminium grill of approved pattern of mesh 80x80mm, 6mm dia bars using U channel 25x12mm for windows / ventilators / doors complet all as specified and directed by Engineer-in-Charge.

S & F Factory Made steel section windows with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded ( for glazed shutter)complete all as specified and directed by Engineer - in - Charge. Note: Only Glass will be measured and paid seperately.

S & F Factory Made steel section windows with side hung shutter including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded ( for gauzed shutter)complete all as specified and directed by Engineer - in - Charge. Note: Only wiremesh will be measured and paid seperately.

M&L for Rubber sheet 50mm wide and of thickeness not less than 3mm fixed with stainless steel screws at the bottom of the door shutters complet all as specified and directed by Engineer-in-Charge.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.40mm and fixed etc., complet all as specified and directed by Engineer-in-Charge.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified.including taking down ms frame and refing ms frame with new wire mesh with tinned tack/by welding in steel window/ventilator /door and making good the disturbed portion during execution complet all as specified and directed by Engineer-in-Charge.. Note for MAP Ph-I & Map Ph -II & Pre MAP Accn

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complet all as specified and directed by Engineer-in-Charge.

M & L sheet glass ordinary quality 3 mm thick and glazing with oil putty / aluminium flats in square n exc 0.50 Sqm in each panes fixed to steel, metal or wooden/ aluminium window frames complet all as specified and directed by Engineer-in-Charge.

M & L in repair sheet glass ordinary quality 4 mm thick and glazing with oil putty or fixing using aluminium beadings in square n exc 0.50 Sqm in each panes fixed to steel, metal or wooden/ aluminium window frames complet all as specified and directed by Engineer-in-Charge.

All as per item above but pin head type, figured glass complet all as specified and directed by Engineer-in-Charge.

S&F in repairs Framed work such as grills, gratings coolar stand, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complet all as specified and directed by Engineer-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying a coat of red oxide zinc chrome primer and two coats of synthetic enamel paint (for steel surfaces) including preparation of surface complet all as specified and directed by Engineer-in-Charge.

M&L preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complet all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted surfaces including as knotting, stopping, Burning off or removing, scraping etc,and then applying one coat of synthetic enamel paint over a coat of primer (ordinary tint) on steel surfaces over 10cm width or girth complete all as specified and directed by Engineer - in - Charge.

M & L for applying one coat of synthetic enamel paint on wood and wood based surfaces of any description, over 10cm width or girth, not other wise described including preparation of old painted surfaces complet all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing and removing rubbish off the premises complet all as specified and directed by Engineer-in-Charge.

M&L Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors including 15 mm thick Screed bed or bedding layer in CM (1:4) etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complet all as specified and directed by Engineer-in-Charge. .Note : Using only course sand in screed bed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, cut to reqd size and shape as in skirtings including 10 mm thick rendering in cement mortar 1:4 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. complete all as specified and directed by Engineer-in-Charge. Note :- Rendering will be done in course sand (Toka sand) only

M&L Non skid ceramic cololured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm. including 15 mm thick Screed bed or bedding layer in CM (1:4) etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge. .Note : Using only course sand in screed bed..

M&L Non skid ceramic cololured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm. in skirtings including 10 mm thick rendering in cement mortar 1:4 etc complet all as specified and directed by Engineer-in-Charge. .Note :- Rendering will be done in course sand (Toka sand) only

S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in verticle surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. including 10 mm thick rendering in cement mortar 1:4 as in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.Note :- Rendering will be done in course sand (Toka sand) onlyetc complete all as specified and directed by Engineer-in-Charge.

Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge.

M&L marble work (Udaipur green slabs) 18 to 20mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade and roundening to the edge of stone slabs on edges in single pice of stair case steps in horizental and vertical portion over 15mm thick screed bed etc. complete all as specified and directed by Engineer-in-Charge.

M&L, Machine cut kota stone slab flooring, cills 18-20mm thick overincluding 15 mm thick Screed bed or bedding layer in CM (1:4) base laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.

M&L, Kota stone slab 18-20mm thick in riser of steps, in skirtings including 10 mm thick rendering in cement mortar 1:4 dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge..Note :- Rendering will be done in course sand (Toka sand) only

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided. complete all as specified and directed by Engineer-in-Charge.

Water proofing treatment to sunken slab and adjjoining vertical surfaces as specified under :- (a) M&L rendering 10 mm thick in cement plaster (1:3) using coarse sand mixed with integral water proofing compound trowel even and smooth with steel trowel on sunken surfaces (Note : WPC shall be measured and paid separately) (b) Applying first coat of chemical pidifin 2K(Dr Fixit) on cleared RCC surfaces @ 0.86 Kg/Sqm (Minimum) as recommended by manufacturer. (c) Provide a layer glass fibre mesh of size 2.25mm x2.25mm (45 GSM) over first coat of chemical Pidifin 2K as per manufacturers recommendation. (d) Applying second coat of chemical Pidifin 2K (Dr Fixit) @ 0.86 Kg/Sqm (minimum) layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturers.

Supply only Integral water proofing compound ISI marked confirming to IS 2645 - 2003 complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:5:10, type E-2 40mm graded stone aggregates as in filling of sunken floors etc complete all as specified and directed by Engineer-in-Charge.

M&L in repairs 40 mm GI pipe medium grade, made to shape as in spout pipe in sunken/ verandah/ Balcony complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

M&L for PCC (1:3:6) type C-2 (using 40mm graded agg) 75mm thick over a truly rammed surface as in sub base ,floors and pavings, plinth protection complete all as specified and directed by Engineer-in-Charge..

M&L for PCC (1:2:4) type B-0, 25mm thick as in floors,pavings e.t.c finished even and fair complete all as specified and directed by engineer in charge

Taking up or down GI tubing 15 mm bore pipe & connection including cleaning for complete all as specified and directed by Engineer-in-Charge..

Ditto- but refixing 15 mm dia ,old steel tubing and connections in new or old possition (wall,ceiling and floors etc) complete all as specified and directed by Engineer-in-Charge.

S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed by Engineer-in-Charge.

Taking up or down GI tubing 20 mm bore & connectio pipe including cleaning for re-fixing complete all as specified and directed by Engineer-in-Charge.

Ditto- but refixing 20 mm dia ,old steel tubing and connections in new or old possition (wall,ceiling and floors etc) complete all as specified and directed by Engineer-in-Charge.

S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed by Engineer-in-Charge.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth. In brick walls complete all as specified and directed by Engineer-in-Charge.

Dismantling water tanks of any description exc 250 and n.exc 500 ltrs capacityand removal from site complete all as specified and directed by Engineer-in-Charge.

M&L for providing cement concrete 1:2:4 Type B1 using 20 mm graded aggregate for as in coping, benching kerb concrete etc including weathing slightly rounded or chamfered angles and throating including necessary formwork etc all complete all as specified and directed by Engineer-in-Charge.

S&F 500 ltrs capacity Rotational moulded polyethylene in white coloured two layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge.

Taking down and Refixing old 500 Ltrs capacity Rotational moulded polyethylen water storage tank after cleaning and removing all scale and dirt etc from tanks and from mouths of cirulating pipes etc complete all as specified and directed by Engineer-in-Charge.

S&F 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & hihdesity plastec ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & hihdesity plastec ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & hihdesity plastec ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair 20mm bore gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15 mm dia bore fancy type chromium plated long body bib taps cast copper alloy with on/off handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and directed by Engineer-in-Charge.

S & F in repairss 15 mm dia bore fancy type chromium plated concealed stop valves of cast copper alloy with long shank & cup etc.complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with on/off handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repairs long body15mm bore fancy type pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes complete all as specified and directed by Engineer-in-Charge.

S & F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified and directed by Engineer-in-Charge.

S&F PTMT grating 125mm dia with waste hole (Minimium weight 40 grams) complete all as specified and directed by Engineer-in-Charge.

S&F PTMT grating 100mm dia without hole (Minimium weight 25 grams) complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel plate racks of size 900mm x 600mm x 250mm and thickness of SS strip of 1mm fixed on wall etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe including 40mm dia CPBrass waste fitting amd waste pipe overall size of SS sink 495mm x 420mm bowl size 410mm x 330mm x 160mm, etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair wash hand basin of size 550 x 400 mm vitrous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed by Engineer-in-Charge.

S&F in repair corner wash hand basin of size 450 x 390 mm vitrous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed by Engineer-in-Charge.

S&F in repair Brass CP mixer 15mm bore for mixing hot & cold water screwed down for iron pipe for Wash Hand Basin complete all as specified and directed by Engineer-in-charge

S&F in repair Brass CP mixer 15mm bore for mixing hot & cold water screwed down for iron pipe for Kitchen sink complete all as specified and directed by Engineer-in-charge

S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed by Engineer-in-Charge.

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat cover, white, closed pattern with flat bottom, and cover with aluminised hinging device, brass chromium plated Jet shower with one meter long flexible pipe including all connection complete all as specified and directed by Engineer-in-Charge.

S&F in repair brass chromium plated jet spray fitting with chrome plated 1.5 mtr long extendable, flexible tube, fixed to EWC complete all as specified and directed by Engineer-in-Charge.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge.

S & F in repair PVC low level cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed by Engineer-in-Charge.

S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and directed by Engineer-in-Charge.

S&F in repair glass corner self assembly, fancy type, made of 5 mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs HDPE lid cover for water tank of capacity 500 Ltr & 1000 Ltr complete all as specified and directed by Engineer in charge.

S & F waste couplings of stainless (half or full threaded) of 40 mm complete all as specified and directed by Engineer in charge.

S & F in repairs 32mm waste fittings brass chromium plated for glazed ware sink,basins etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other end fixed complete all as specified and directed by Engineer - in - Charge.

S & F in repairs polythelene waste peipe suitable for both basin and sink complete all as specified and directed by Engineer - in - Charge.

S&F in repairs CP brass tubular towel rail, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified and directed by Engineer-in-Charge.

M&L for repairing of leaking bib taps of any patterns, concealed stop cock, pillar cock or wall mixer , basin mixer with and including internal any accesaries like spindle, washer etc of any description & any dia (15mm / 20mm) bore and fixing properly complete all as specified and directed by Engineer-in-Charge.

Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc including cleaning or refixing or removal to store(measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engineer-in-Charge.

S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed by Engineer-in-Charge.

S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified and directed by Engineer-in-Charge.

S & F in repairs Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays for 100mm bore of pipe, including bolts and nuts and securing ends of stays to wall or roof etc complete all as specified and directed by Engineer - in - Charge.

M&L in repairs for 25mm dia fancy type PVC coated MS Pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing curtain rods any description with accessories complete all as specified and directed by Engineer-in-Charge.. Note : The cost of brackets and knobs is deemed to be included in the quoted rate. Nothing extra shall be paid on this account.

Dismantling and disconnecting existing CI soil waste/vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed by Engineer-in-Charge.

Dismantling and disconnecting of existing CI soil waste/vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed by Engineer-in-Charge.

S&F 100mm bore Sand Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but fixed to walls & fixing with clamps complete all as specified and directed by Engineer-in-Charge.

S&F 75mm bore Sand Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but laid in trenches / floors. complete all as specified and directed by Engineer-in-Charge.

S&F 100 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door as in repairs complete all as specified and directed by Engineer-in-Charge.

S&F 75 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door as in repairs complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm dia of long neck CI floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified and directed by Engineer-in-Charge.

M&L Branch pieces, 100 mm bore, (equal or unqual), ordinary or inverted (spigot or socket type) or with oval acess door as in repairs complete all as specified and directed by Engineer-in-Charge.

M&L Branch pieces, 75 mm bore, (equal or unqual), ordinary or inverted (spigot or socket type) or with oval acess door as in repairs complete all as specified and directed by Engineer-in-Charge.

M&L Bends suitable for 100mm dia CI pipe with duck's foot or heel rest as in repairs complete all as specified and directed by Engineer-in-Charge

Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick in patches in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick in patches in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 5mm thick in cement mortar in 1:3 on ceiling finished evern & smooth complete all as specified and directed by Engineer-in-Charge.

M&L for prepration of New plastered Internal wall surface complete applying the following :- (a) M&L 2 mm thick wall care putty in two coats on wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directed complete all as specified and directed by Engineer-in-Charge. (b) M&L two coat of Oil Bound disttemper over a coat of chalk whitening priming by using Airless spray / Roller over complete all as specified and directed by Engineer-in-Charge. Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible

M&L applying two coats of premium acrylic smooth exterior weatherproof paint Apex on New Plastered external surfaces of wall on old plastered surface of wall complete all as specified and directed by Engineer-in-charge

M&L for applying two coats of white wash on newly plastered surface of ceiling etc complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment on old wall surface smoothening the surface with sand papers / Mechanized sanding etc complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of surfaces and applying a coat of primer on old prepared surface by using Roller complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of surfaces with3mm thick wall care putty on wall , including smooth finishing to receive finishes etc complete all as specified and directed by Engg-in-charge

M&L applying two coats of premium acrylic smooth exterior weatherproof paint Apex on external surfaces of wall on old plastered surface of wall complete all as specified and directed by Engineer-in-charge

Dismantling of brickwork built in cement mortar of any description complete all as specified and directed as per Engineer-In-Charge

M&L brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc.complete all as specified and directed by Engineer - in - Charge.

M&L half brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc complete all as specified and directed by Engineer-in-Charge.

M&L for welding in repairs Thickness of metal to be welded will be Exc 9 mm but not exc 20mm complete all as specified and directed by Engineer - in - Charge.

M&L in repairs for fixing of GI wire netting 0.90mm dia and 12mm mesh lathing by means of fasteners of requierd lenth and spacing beetween fasterners is 300mm centre to centre both way to concrete surface etc,in walls,ceilings,stanchions,beams,etc including all laps,cutting and waste etc complete all as specified and directed by Engineer-in- charge. Note ; Fixing with nails included in this quoted rates

M&L for 5 mm thick one layer of cement : Coarse sand (1:2) over fixed GI wire netting making goiod after that rendering 5 mm thick in cement mortar in 1:3 on ceiling complete all as specified and directed by Engineer-in-Charge.

M&L in replacement for Mild steel work as ISMB,joists channel,angle or tee section fixed adjacent to ceiling and embedding in floor and brickwork including cutting welding and the like including caps.bases,splices etc,built from one or more beam or channel section or angle with plates including all lattice bars, stiffeners,gusset plates including necessary welding,rivetting etc.confirming to Fe 410 (Gde E-250) quality A etc complete all as specified and directed by Engineer-in-charge.

Demolition of RCC of any descrition such as Kitchen chimney, chajja, shelves, OHT Tanks. etc and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition)

M&L for reinforced cement concrete type B1 1:2:4 (20 mm graged aggregate) as in Slab supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and etc. and setting in mortar complete with joints to match complete all as specified and directed by Engineer-in-Charge.

M&L for Mild Steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

Use and waste of form work torough finished surfaces of soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick complete all as specified and directed by Engineer-in-Charge.

Note :(i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

R B Infrabuilders