Link road from Shiv Mandir New Nalagarh to Village Gaguwal

Amount

Excavation in drains and channels etc., in earth work including dressing of side and bed and disposing of excavated earth upto a lead of 20 metres and lift upto 1.50 metres disposed earth to be levelled and neatly dressed: (Pick Jumper work)

Excavation in earth work and filling to 15 cm. layera infoundation and plinths including ramming watering and consolidating up to a lead of 20 metres and lift upto 1.50 metres Spad work & Pick work

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 (By mechanical means) as per Technical Specification Clause 404. including carriage of materials in all leads and lifts including mechanical means.

Providing and laying Plain/reinforced cement concrete in open foundations complete as per drawings and technical specifications clauses 802,803,1202 &1203 P.C.C. 1:3:6 grade M -10. including cost of form work, centering, shuttering etc.

Providing and laying heavy duty precast cement conrete interlocking block pavements having thickness as per draings and Technical specification clause 1504 ( sub-base of concrete floor to be paid for separtely) . 80mm. thick I.S.I. interlocking blocks.

Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub-base concrete floor to be paid for separately) 40mm thick inter locking blocks including carriage of material in all leads & lifts.

Providing concrete for plain/rainforced concrete in open fondations complete as per drawings and technical specificationbs clause 802, 803, 1202 & 1203 III. P.C.C. grade M 20 (i) Nominal mix (1:2:4) including cost of form work, centering, shuttering etc.

Providing and laying upto first floor two level reinforced cement concrete 1:2:4 (1 cement : 2 Sand : 4 graded stone aggregate 20mm nominal size) to give a smooth and even surface including centring and shuttering etc. but excluding cost of reinforcement in :Kerbs ,steps and the like

Steel work welded in built up sections including cutting,hoisting, fixing,in position and applying a priming coat of red lead paint . In gratings framed guard bars, ladders , railling,brackets and similar works.

Providing and applying priming coat with Bitumen emulsion ( SS- 1 ) on prepaired surface of granular base including cleaning og road surface and spraying primer at the rate of 1.20-1.50 kg /sqm. using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat with Bitumen emulsion ( RS- 1 ) uasing emulsion distributor at the rate of 0.20-0.25 kg /sqm. on the prepaired bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503

Providing and laying Dense Graded Bituminous Macadam laying with paver finisher equiped with electronic sensor laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions ofdensity, complete as per specificatons and directions of Engineer-in-Charge. with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity ( 16.54.1)

Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required .grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix

Providing and laying hot applied thermoplastic compound 2.5 mm thick including refectorising glass beads @ 250 gms sqmt. Area thickness of 2.5 mm is inclusive of surface applied glass beads as per I R C : 35. The finished surface to be level uniform and free from streaks and holes.

Providing and fixing Cat Eyes reflecting / glowing during the night hours on Road surfaces complete in all respect.

NARANJAN DASS