BM/00171/ELEC/EO/2025-26

Supply & Installation of LED Mini Mast & LED Street Light at Saraswati Byam Samiti Club, Pal Bagan Lane area and different area under Ward No-11 of Bally Municipality under A.C 169 in MPLAD Scheme.

Supplying of Swaged Steel Tubular pole (IS 2713, Pt. II 1980) for following designation and of following dimension. 4 SWG ;6.0 mtrs;

410-SP-33, 9.0 Mtr (For Mini Mast) Ref:UDMA/E-M Works/2018/P-3/I-1(e)

Erection of single steel Tubular pole of length as given below with /without sole plate & cap etc. in C.C. foundation (Proportion and dimension indicated below). having 600 x 600 x 150 mm. thick C.C. (4:2:1) base block below sole plate/pole with hard jhama metal incl. C.C (6:3:1) muffing 0.30 Mt.dia and 0.30 Mt above ground level incl.3mm thick neat cemented finished and G.I. earth bolt after making drilled holes etc.on pole & Carriage of pole upto 1.6 Km from store to work site incl. filling up the excavated earth pit with shifted soil and ramming properly. Pole upto 9 Mts. Size- 0.6 x 0.6 x 1.70 Mts

S/F arm bracket of 50 mm bore tubular Pipe (M.S.) of 1. 5 m (5’) length for fixing on 75/100 mm pole top including S/F 4 mm thick M.S. plate welded with bolts, nuts & clamps, etc. as required with fabrication work.

S/F including fabrication, welding, fixing G.I. junction 6 arm projected bkt. with 2 nos. thro’ bolts & nuts of 7"long and 5/8" dia including M.S.pole cap at the top of the junction with set screw etc. as reqd. and as per direction of Engineer-In-Charge for arm 2.1M long (G.I. Pipe) (ISI medium) (For 3 Nos Mini Mast)

Supplying & fixing GI waterproof type looping cable box size 200 x 150 x 100mm deep having 4mm thick comprising of one 250Volts 15 A Kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2 core 16 sqmm PVC/A cable and having lined with rubber gasketted CI top cover with brass machine screws etc. earthing terminal with lug,on steel tubular pole near base, incl. S & F 40 x 6 mm thick, MS clamps with bolts, nuts etc.incl.painting with anticorrosive paint.

Painting of steel tubular pole of length and no.of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl.prepartion of surface by sand paper/emery paper,cleaning etc.for receiving fresh coat of paint upto 9 Mts. long pole:- 2 coats of Aluminium Paint over 1(one) coat of R.O.priming.

Earthing with 15.88mm dia 1.8 mtr.long G.I earth spike against each pole. Ref: KMC schedule (9 New Pole)

Supplying Al.conductor PVC insulated and sheathed unarmoredcable (1.1KVgrade, Gloster/Havells/Polycab). Street Light Span = 30 Mtr. Mini Mast Span = 42 Mtr. 10sqmm x 4core

Supplying & Erection of 75 x 88 mm Porcelain Shackle insulator complete with 190 x 30 x 5 mm Galv.(Hot Dip) Strips with 15.88mm dia Galv. bolts, nuts, etc. for conductor upto 7/3.10 mm, 32 sqmm of AAC/equivalent size of ACSR.

Drawing of unarmoured cable of suitable size including Supply and drawing of 7/14 SWG galvanised stranded wire for drawing unarmored cable (supply of cable is not included in the scope) by catenary system of wiring with 3nos. reel insulator per mtr. and binding with binding wires etc,as reqd.

Supplying & Delivery of LED Street Light with pressure die cast anuminiumn housing, IP66 protection, road way luminarie with high power LED as per detail Technical proposal, Specification and vendor list. Type: 45 Watt LED, Model: BRP 062 LED 65 CW SLC S1 PSU

Type: 60 Watt LED, Model: BRP 062 LED 65 CW SLC S1 PSU

Type: 150 Watt LED, BRP340 LED 150 CW SLC S2 PSU GR

Hoisting fixing and commissioning of luminaries including making necessary connection and earthing attachment: HPMV/HPSV luminaries/LED fittings of any wattage.

Supplying & Delivery of 150 Watt LED Flood Light with pressure die cast anuminiumn housing, IP66 protection, road way luminarie with high power LED as per detail Technical proposal, Specification and vendor list. LED should be warrantee for 5 years

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. 3 x 22/0.3 (1.5 Sq mm) For connection from Loop Box to Fittings = 4 Mtr for Each Fittings.

Supply and Fixing of 2 mm Polyvinyl glow sign board made of 22 SWG GI sheet box with 1”X1” aluminum channel for fixing the vinyl board after necessary cutting the letter as required & s\f LED tube light fittings along with all accessories Size: 4'x 3'x 2 side X 2 Nos + 4'x 3'x 1 side X 5 Nos