8123/SAR-26/2023-24 REPAIR/MAINT OF DG SET, SECURITY LIGHT, FIRE ALARM SYSTEM, VOLTAGE STABILIZERS , LT DISTRIBUTION SYSTEM AND ALLIED WORKS AND REPAIR /MAINT OF EXTERNAL WATER SUPPLY SYSTEMS AT ARC AND AIRWING AREA SARSAWA UNDER GE(AF) SARSAWA

Amount

M&L for attending complatints of street light, flood light,high mast light mounted at any height in pole/hanger in ARC main campus/TX area/Airwing area and connected road light by checking connection , serviceability of fittings, SMC boxes , MCB, thimbles or any other minor fault complete all as specified and directed. Note- (a) Arrangement of Ladder shall be done by contractor. (b) Arrangement of hydra or any other T&P, Grese for attending complaints of Hanger light shall be done by contractor.(c) one electrician and one helper shall be deployed at ARC Main campus for attending Street light complaints on daily basis till the completion of Contract.(d) Complaints shall be rectified with in 24 Hours.(e) Weekly inspection of all security lights/street lights of area under ARC shall be carried out and report shall be submitted to Engr-in-chage with out any delay.

Supply and fixing LED type street light 35 watt 230 watt volts AC outdoor type with t IP 65 class protection with aluminium die cast housing glare free light distribution impact and corrosion resistant operating voltage range 140v to 270 V, total lumen efficiency =80 lm/watt , THD≤ 20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 5 Kv, 50000 Hrs burning hours complet all as specified and directed..

Supply and fixing LED type street light 60 watt 230 watt volts AC outdoor type with t IP 65 class protection with aluminium die cast housing glare free light distribution impact and corrosion resistant operating voltage range 140v to 270 V, total lumen efficiency =80 lm/watt , THD≤ 20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 5 Kv, 50000 Hrs burning hours complet all as specified and directed..

Supply and fixing LED type street light 90 watt 230 watt volts AC outdoor type with t IP 65 class protection with aluminium die cast housing glare free light distribution impact and corrosion resistant operating voltage range 140v to 270 V, total lumen efficiency =80 lm/watt , THD≤ 20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 5 Kv, 50000 Hrs burning hours complet all as specified and directed..

Supply and fixing LED type flood light 70 watt 230 watt volts AC outdoor type with t IP 65 class protection with aluminium die cast housing glare free light distribution impact and corrosion resistant operating voltage range 140v to 270 V, total lumen efficiency =80 lm/watt , THD≤ 20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 5 Kv, 50000 Hrs burning hours complet all as specified and directed..

Supply and fixing LED type flood light 100 watt 230 watt volts AC outdoor type with t IP 65 class protection with aluminium die cast housing glare free light distribution impact and corrosion resistant operating voltage range 140v to 270 V, total lumen efficiency =80 lm/watt , THD≤ 20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 5 Kv, 50000 Hrs burning hours complet all as specified and directed..

Supply and fixing LED type flood light 120 watt 230 watt volts AC outdoor type with t IP 65 class protection with aluminium die cast housing glare free light distribution impact and corrosion resistant operating voltage range 140v to 270 V, total lumen efficiency =80 lm/watt , THD≤ 20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 5 Kv, 50000 Hrs burning hours complet all as specified and directed..

Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 class protection with aluminium die cast housing cum heat sink circular canopy and clear acrylic cover for 360 degree indirect uniform glare free light distribution impact and corrosion resistant operating voltage range 140v to 270 V, total system lumen not less than 3200 lumens lumen efficiency =80 lm/watt , THD≤ 20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 5 Kv, 50000 Hrs burning hours complet all as specified and directed..

Supply and fixing LED Bollard 10 watt 230 watt volts AC outdoor type with decorative for 360 degree indirect light IP 65 class protection with aluminium die cast housing cum heat sink circular at the top and opaque acrylic cover for 360 degree indirect uniform glare free light distribution impact and corrosion resistant operating voltage range 140v to 270 V, total system lumen not less than 3200 lumens lumen efficiency =80 lm/watt , THD≤ 20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 5 Kv, 50000 Hrs burning hours complet all as specified and directed. Note- Earth work and PCC shall be included in quoted rate.

S&F in replacement of PVC SMC boxes with hinged door fixing of size 333mmx233mmx120 mm with MS clamp made to shape with necessery nut bolts and washers complete comprising of Aluminium busbar 63 Amps capacity of suitable size mounted over porcelain insulator withMS clamp nut bolts & washers incl MCB 6 Amps and making incoming and outgoing connections by taking out loops of cable of any size incl necessary excavations and other civil works all as specified and directed. Make- 1.Sintex 2.Universal 3.SMS

S&F in Rep/Replacement of cable PVC insulated unarmored for connection 2.5 Sqmm 3 core copper conductor duly drawn from junction box to street light fitting on poles in heavy duty rigid PVC conduit pipes complete all as specified and directed. MAKE- 1. Havells 2.phinolex 3.wipro

M&L for scrapping of surface of steel tubular poles of any size with emery paper and painting of poles with one coat of primer and two coats of aluminium paint of approved make incl writing pole nos on white backgrounds with black paint , complete all as specified and directed.

S&F in replacement of existing unserviceable driver circuit with new one of any make or any model on existing LED street light luninatrie of wattage 45 to 120W.

S&F in replacement of existing unserviceable driver circuit with new one of any make or any model on existing LED Flood light luninatrie of wattage 60 to 180W.

S&F in replacement of existing unserviceable surge protector with new one of any make or any model on existing LED street/Flood light luninatrie of wattage 45 to 120W.

M&L street light bracket made out from GI Pipe 32 mm bore, light grade, 1.2 m long bent to shape including fixing 02 set of clamp made out from MS Flats of size 25x5 mm complete with nuts and bolts and washers of suitable size duly painted with two coats of aluminium paint over a coat of red oxide primer all as specified and directed .

S& Laying XLPE cable insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 V grade with standard aluminium conductor of size 16 Sqmm 4 core all as specified and directed. MAKE- 1. Havells 2.phinolex 3.wipro

S& Laying XLPE cable insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 V grade with standard aluminium conductor of size 10 Sqmm 4 core all as specified and directed. MAKE- 1. Havells 2.phinolex 3.wipro

S&F of timer switch for security light duly steel enclosed with locking arrangement fixed to wall/pole / existing panel by means of clamp.nut,bolt washers or by welding including following items-(a) MCCB 63 A 16 KA 4 Pole-01 Nos,(b) MCB SPN 16-40 Amp - 01 Nos, (c) Power Contactor ML3 , 3 Pole- 01 No, (d) Time switch analog dial type - 01 Nos, (e) Bypass arrangement for testing/repair of light.

Supply and fixing LED aviation light 10 watt duly enclosed in die cast aluminium casting with Red polycarbonate dome for better illumination, Integral driver , Supper flux 5mm 302nos LEDs incorporated with Ingress Protection : IP65, Protection against short-circuit, Protection against surge, Wide operating input voltage range 100 – 270VAC, burning hr 50,000Hrs.complete all as specified and directed.

M&L for inspection , servicing and repair of DG sets with B check by authorised service engineers of manufactureres of the following capacities including minor repairs and replacement of worn out spares such as fuel filter, hose pipes, injector nozzles, cut out, electrical wiring, self starter, dynamo / alternator and tightening of nut bolts, washers, tappet adjustments, cleaning of head assembly including and de-carbonising, inlet and exhaust valves, grinding of valve seats, changing of lubricating oil, etc; complete including testing on load all as directed. 40 KVA capacity

All as per above item no 21 here in before but 250KVA Capacity Notes for srl item No.- (i) Spares incl E/Oil required shall be measured and paid seperately under respective items of Schedule. (ii) The POL required for for carrying out test after repairs will be issued by the department. (iii) Testing of DG sets up to working load will be carried out after carrying out repairs to the entire satisfaction of the Engr-In- Charge. (iv) The rate quoted includes for all essential materials which are not otherwise specified in this schedule but are required to ensure smooth functioning of the DG Sets. (v) All T&P, manpower and transport required to carry out the work at site including loading , un-loading etc will be provided by the contractor. Cost of the same is deemed to be included in the quoted rates. (vi) All additional spares oil filter, air cleaner, oil pump repair kit, V- belt, Oil pipes, fuel pipe, water pump, head gasket kit,etc as required will measured and paid seperately. (vii) After servicing Contractor has to attend and rectify any complaint related to perticuler DG set within 24 Hrs without any cost to department till the duration of contract. Amount of Rs 500 per day will be recovered for any delay attending complaints. (viii) servicing shall be carried out within 15 days of award of contract.

Supply and fix in replacement oil pipe (Copper flexible tube) with check nuts for DG sets of any make / capacity complete all as specified and as directed.

Supply and replace 'V' belt as per sample for DG sets of following capacity:- 40 KVA capacity

All as per above item no 24 here in before but 250 KVA Capacity

Supply and replace fuel flexible pipe, FIP to Filter, heavy duty with check nuts and benjo bolts, for DG sets of capacity upto 250 KVA complete all as specified and directed.

Supply and replace air cleaner filter assembly complete suitable for DG set of of following capicity :- 40 KVA capacity

All as per above item no 27 here in before but 250 KVA Capacity

S & F in repair oil pressure gauge suitable for DG set upto 250 KVA complete all as specified and as directed.

S & F in repair temperature gauge suitable for DG set upto 250 KVA compleete all as specified and as directed.

S & F in repair lub oil filter for DG sets of any make / capacity compleete all as specified and as directed.

S & F in repair fuel filter for DG sets of any make / capacity compleete all as specified and as directed.

S & F in repair ignition switch, 12 V with keys compleete all as specified and as directed.

Dismantling and taking down radiator assembly from engine of DG Set for repairs including de-scaling, bracing of inner tubes and body as required to plug leakages, repairs to radiator frame and tank including cutting and removing deteriorated inner tubes, chamber, frame etc. and re-constructing the same with same material in original size and shape, cleaning / straightening of fins and re fixing after repairs including replacement of worn out nut bolts, washers, aluminium water elbow, radiator cap, radiator beds etc; and pressure testing for leakage complete all as directed for capacity :- 40 KVA capacity

All as per above item no 34 here in before but 250 KVA Capacity

Supply and fixing in replacement, radiator assembly complete including all accessaries such as radiator core comprising copper tubes, fins, upper and lower tanks, radiator frame, inlet and outlet pipes, radiator cap etc,complete all as directed for capacity. 40 KVA DG set .

All as per above item no 36 here in before but 250 KVA DG Set

Supply and replace of maintanance free unserviceable battery 12 V, 150 AH with initial charging and testing compleete all as specified and as directed. Make: Amaron/Exide/Microtek.

Supply and replace of maintanance free unserviceable battery 12 V, 90 AH with initial charging and testing compleete all as specified and as directed. Make: Amaron/Exide/Microtek.

M & L for cleaning of fuel tank of DG sets emptying the fuel carefully and removing all sedimented particles including scales using wire brushes and kerosene including replacement of worn out transparent fuel level indicating tube including necessary fixing arrangements and marking fuel levels on the tank using white synthetic enamel paint all as specified and directed. 40 KVA capacity

All as per above item no 40 here in before but 250 KVA Capacity

M&L for replacement of battery terminal of brass suitable for 12V, 90 AH to 150 AH battery all as specified and directed.

M&L for replacement of battery lead, copper conductor, single core, 25 Sq mm, multi stranded, PVC insulated with suitable terminals at both ends of lengths as per site requirements all as specified and directed.

Supply and fixing in repairs rubber hose pipe kit complete for radiator suitable for DG Sets of following capacity:- 40 KVA capacity

All as per above item no 44 here in before but 250 KVA Capacity

Supply and fillling coolent suitable for DG set complete all as specified and directed. Make-: Castrol / Servo / HP

Supply in replacement, Engine oil, multi grade 20 W 40 or equivalent grade of make : Castrol / Servo / HP

Supply and Topup of distilled water in Battery of any size complete all as specified and directed.

M&L for Replacement of AVR Unit of 250 KVA DG Set complete all as specified and directed by Engr-In-Charge.

Maintenance / repairs to AMF panels, by skilled technician and replacement of unserviceable spares as specified below for capacities of 40 to 250 KVA DG set including replacement of controle wiring with FRLS copper conductor cables with appropriate gauge and cleaning of all moving contacts of relay contactors, tightening of all terminals and testing afer repairs to ensure serviceability and corrected output at specified power factor all as specified and directed at site.

Supply only electronic timer any type for 0 to 10 Sec (on Delay)

Supply only electronic timer any type for 0 to 60 Sec (off Delay)

supply only Power contactor MNX 35

supply only Power contactor MNX 70

supply only Power contactor MNX 110

Supply only starting relay with sequence timer and master timer

Supply only Under voltage relay

Supply only over voltage relay

M&L for repair/replacement of battery charger for AMF panel with existing Capacity complete all as specified and directed by Engr-In-Charge.

Supply , laying & testing in repair for XLPE insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs complete of size 16 Sqmm nominal cross section x 2 core.

All as per above item no 61 here in before but Size 25 Sqmm X 3.5 core

All as per above item no 61 here in before but Size 35 Sqmm X 3.5 core

All as per above item no 61 here in before but Size 50 Sqmm X 3.5 core

All as per above item no 61 here in before but Size 70 Sqmm X 3.5 core

All as per above item no 61 here in before but Size 95 Sqmm X 3.5 core

All as per above item no 61 here in before but Size 400 Sqmm X 3.5 core

All as per above item no 61 here in before but Size 120 Sqmm X3.5 core

All as per above item no 61 here in before but Size 240 Sqmm X3.5 core

Supply and fixing of GI tubing, light grade, 40 mm bore with all fitting lais in trenches / pole / wall for protection of cables in repairs complete.

Supply and fixing of GI tubing, light grade, 80 mm bore with all fitting lais in trenches / pole / wall for protection of cables in repairs complete.

Supply and fix in repair cable jointing kit for 1.1 KV grade cable for heat shrinkable straight through joint complete with Jointing material of tubular sleeve version and accessories suitable for 3½/ 4 core XLPE armoured Al conductor cable of size 25 to 50 sq mm complete . Make- Recmay / Densal or equivalent .

Supply and fix in repair cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material of tubular sleeve version and accessories suitable for 3½/ 4 core XLPE armoured Al conductor cable of size 70 to 150 sq mm complete .Make- Recmay / Densal or equivalent .

Supply and fix in repair cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material of tubular sleeve version and accessories suitable for 3½/ 4 core XLPE armoured Al conductor cable of size 185 to 400 sq mm complete . Make- Raychem/ Denson/3M

Supply and fix ON load four pole changeover switch with front handle of 4 pole 415 volt 50 Hz 250 amps in SS Enclosure and Conforming to IS/IEC : 60947-1 & 3 complete all as directed .

Supply and fix ON load four pole changeover switch with front handle of 4 pole 415 volt 50 Hz 200 amps in SS Enclosure and Conforming to IS/IEC : 60947-1 & 3 complete all as directed .

Supply and fix ON load four pole changeover switch with front handle of 4 pole 415 volt 50 Hz 125 amps in SS Enclosure and Conforming to IS/IEC : 60947-1 & 3 complete all as directed

Supply and fix ON load four pole changeover switch with front handle of 4 pole 415 volt 50 Hz 100 amps in SS Enclosure and Conforming to IS/IEC : 60947-1 & 3 complete all as directed .

S&F Danger notice plate of 1.6mm thick mild steel sheet vitreous enameled white with letter figures and conventional skull and bones in signal red colour and fix with MS clamp for LT size 20 X 15 Cm fix in repairs complete all as specified.

Supply only Aluminium lugs of any type complete all as per of sample of following sizes :-16 Sqmm

All as per above item no 79 here in before but 25 Sqmm

All as per above item no 79 here in before but 50 Sqmm

All as per above item no 79 here in before but 70 Sqmm

All as per above item no 79 here in before but 95 Sqmm

All as per above item no 79 here in before but 120 Sqmm

All as per above item no 79 here in before but 150 Sqmm

All as per above item no 79 here in before but 240 Sqmm

Supply & Fixing in repair including making connection testing and commissioning of new MCCB 3 Pole, 415 V, fixed type, 25 to 100 Amps with breaking capacity 16 KA. Note: (a) make of MCCB shall be L &T , Havells, Strandard, crompton, C & S, Schneider or any other make as per the make in the existing plannel board or exactly suitable to the existing frame size. In case only one particular make is procuring by the bidder necceasry alteration required to fix the same at no extra cost shall be done by the bidder .(b) Type of MCCB weather with operating knob or handle type shall be procured as per site requirement.

All as per above item no 87 here in before but MCCB TP 160 Amps, 36 KA with Adjustable thermal setting ( 80 to 100 %) complete.

All as per above item no 87 here in before but MCCB TP 250 Amps, 36 KA with Adjustable thermal setting ( 80 to 100 %) complete.

All as per above item no 87 here in before but MCCB TP 125 Amps, 36 KA with Adjustable thermal setting ( 80 to 100 %) complete.

All as per above item no 87 here in before but 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA.

All as per above item no 87 here in before but 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA.

All as per above item no 87 here in before but 4 Pole, 415 V, Adjustable type, 400 Amps with breaking capacity 36 KA.

M&L for defect rectification in LT/HT cable laid in trenches up to 630 Sq mm 3/3.5 core cable with the help of electronic fault locating machine/FLC comprising of surge generator pulse/CFC fault locator high pressure resistance and distance calculation for faults exposing the fault, removal of deteriorated portion and for cable joint complete all as specified and as directed.

M&L for disconnecting worn out cable of up to 630 Sqmm size from main control panel/LT OH lines cutting worn-out portion and reconnecting with control panel/LT over head line with suitable size of thimbles by incl excavation of earth work for taking out cables from loop complete all as specified and directed.

M & L Air termination of Lighting conductors, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and directed .

M & L Air termination, single pointed, copper rod 12mm dia and 300mm long complete all as specified and directed .

M&L for Earthing to machinary with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to main earth strip of size 32x6mm galvanised iron strip by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead shall be protected by GI pipe 40 mm dia medium grade and connected to machinary including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete all as specified and as directed.

Supply, installation and commissioning of MF Heavy Duty long life TRIPODE Earthing set to get guaranteed permanent stable resistance value of set less 1 ohm in all weather and any type of soil condition consisting of High Quality Hot Dipped Galvanized Iron (HQHDGI) as per Model No 61180HQHD of make Om Electrotech india of pit depth 32500mm, electrode depth 3100mm, pit dia 300mm to 400 mm, with electrode dia of 76mm. High Quality Hot Dipped Galvanized Iron (HQHDGI) Electrode should be CPRI approved for high magnitude fault current and should be able to stand High voltage Earthing Test (HVET) at site , filled with hygroscopic non - hazardous superconductive pure graphite and Sulphur based homogenous semi paste form mixture of different conductive compounds which have very long life and moisture holding capacity. Pit should be filled with NABL approved LAB tested superconductive paste of hygroscopic non - hazardous superconductive pure graphite, Sulphur,aluminum, zinc compounds and natural minerals added in sufficient quantity to hold the moisture. Individual sets should be interconnected with GI strip of size 25 x 3mm to make TRIPODE Set along with protection pipe. Tripode set and test point shall be interconnected with same strip along with protection pipe. All pits should be covered with suitable Poly plastic / FRP/ MS pit cover. Installation and commissioning should be done by OEM for guaranteed resistance value of less than 1 ohm and should be able to do High voltage Earthing Test (HVET) at site. Each Electrode should bear manufacturer Srl No to check genuinity of material. Note : 1. Quoted rate are inclusive of earth work, GI strip for interconnection with protection pipe.2. Earthing shall be tested after completion of work by contractor in presence of Engr-in- Charge and proper record shall be maintained duly signed by all concerned. On testing if the desired earth resistance of less than 1.0 Ohm is not obtained the earthing will be redone at no extra cost to Govt. 3. Test point measured and paid separately.

M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw

M&L Aluminium strip 25X3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete with saddles and base insulators complete all as specified and as directed.

M&L GI strip 32X6 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete with saddles and base insulators (porcelain /PVC/rubber) complete all as specified and as directed.

M& L for earth continuity conducted or main earthing lead fixed to wall/ceiling on batten or recess or chases or buried in ground or drawn in conduit/pipe or other directed situation for earthing etc as required 20x3 copper strip all as specified and directed.

S&F SMC/DMC insulator for seperation of earth strip from wall /ceiling including fixing aceessoriese such as nut bolt etc complete all as specified and directed.

S&F heat shrinkable insulation sleeves for earth strip protection of size 20x3mm fixed to wall complete all as specified and directed.

Supply only conventional type 4 wire , 3½ digit LCD display which can measure Earth resistance / Earthing measurement instrument ranges of 0.01 ohm to 1999 ohm with rechargeable internal Ni-MH battery . It is certified as per IS-9223.

Supply only digital type multimeter LCD display which can measure current , voltage and conituity with inbuilt buzzer sound with IEC 61010 complete all as specified and directed.

Supply only Highly insulated FRP Earth/Discharge rod of assembled height 15ft in section 03x5ft height. Die cast alu. Grounding "C" clamp. ISI marked PVC insulated multi-stranded 440/11000V grade transparent copper cable 35sq.mm (length 25ft) as per IS-694.

M&L for preparation of old steel painted surfaces of LT panels of any type and size by brushing/changing stain, greasy spots with thinner and apply two coats of spray painting with super enameled paint with colour of users choice approved by Dept. and writing the distribution area/location with white paint as directed to transformer indoor/outdoor installed at various different locations complete all as specified and directed at site.

M & L for Cross arms, bracing, supports, clamps and back plate, fabricated from structural steel section including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as directed including two coats of synthetic enamel paint over a coat of red oxide primer, complete all as directed .Dismantling and taking out damage/rusted cross arms, bracings, supports, clamps and back plates from existing poles / dismantled poles / pole structures complete all as directed by EIC.

M&L for carrying out horizontal boring below roads/PCC hard sanding/Drains all as specified as directed for inserting GI pipe of the following sze with a depth upto 1.5m & length of road upto 12 m of the suitable for 40 & 80 mm dia GI pipe

Supply and Pouring of back fill compound in earth pit complete all as specified and directed . Make - Innove or Equivalent .

Supply and erect true vertical steel tubular swaged pole confirming to IS-2713 part-II 410 SP-31 ,9.0 meter long complete with MS base plate of 6 mm thick of size 300x300 mm , finial taper plug, cap , bolt, nuts, eashers including painting externally with two coats of aluminium paint over a coat of red oxide primer for exposed portion and two coats of black bituminious paint for embeded portion in concrete as well as throughout internally including povision of white and blue colour strips with fluorescent paint upto 1.5 mtr height and numbering of pole complete all as specified and directes by engr-in-charge.

Supply and fix in repair ACB 4 pole 415 volts , 800 -1250 amps , AC 50 Hz with breaking capacity 50 KA conforming to IS/IEC-60947-2 with themal magnetic release and manual drawout type ( Thermally adustable type ) inclding electrical connection as per site requirement complete all as specified and directed .

Excavation in trenches in soft/loose soil not exceeding 1.5 meter wide & not exc 1.5 mtr deep and getting out for taking out/laying cable, poles & stay etc complete all as specified and directed by engr-in-charge.

Returning, filling in including spresding leveling watering and well ramming in layers not exceeding 25cm thick after the cable have been laid and tested complete all as specified and directed by Engr-in-Charge..

Removal of excavated surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engr-in-Charge.

M & L for dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying ( total 23 cm ) and compaction till 18 cm thick for measurement purpose complete all as specified and directed .

Material labour for common burnt clay bricks, sub class 'B' grade laid in trenches for protection of UG cables perpendicular to the direction of the cables complete all as specified and as directed by Engr-in-Charge

M & L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation of pole or similar works complete all as specified and directed.

M & L for Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete for fixing of pole complete all as specified and directed.

M & L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for copings of poles/stay/panels complete all as specified and directed.

Disconecting the LT incoming and outgoing main cables of any size ,strip opening of the 120 KVA voltage stablizer , draining out the oil into a cleaned container ( container shall be arranaged by the contractor ).Lifting up dimmer and transformer with help of tripoid and chain pulley etc (The T & P shall be arranged by contractor ), checking of all the parts ,cleaning and servicing of the container,dimmer,transformers coil and allied parts including replacememnt of minor parts like nut bolts ,connecting wires ,rubber seals /packing etc . ( The repair/ replacement of the major parts shall be measured and paid seperately ) and reassembling the volt stablizer complete (in reverse order.). Refilling oil after dehydration and filtration/cleaning by centrifuging machine including testing of samples before and after dehydrations and filtration complete, and reconeecting the incoming and outgoing cable connection, commisioning and testing of the volt stablizer on load complete all as specified and directed.

S & F in replacement of Electronic circuit card( P.C B) card with drive assembly for unbalanced type stablizer of 120 KVA complete all as specified and as directed.

S & F in replacement of Auto/manual switch for servo type voltage stablizer 120 KVA capacity complete all as specified and as directed.

S & F in replacement of Push button switch for servo type voltage stablizer 120 KVA capacity complete all as specified and as directed.

S & F in replacement of Micro switch for servo type voltage stablizer 120 KVA capacity complete all as specified and as directed.

S & F in replacement of DPDT switch for servo type voltage stablizer 120 KVA capacity complete all as specified and as directed.

S & F in replacement of Panel lamp for servo type voltage stablizer 120 KVA capacity complete all as specified and as directed.

S & F in replacement of Potentiometer for servo type voltage stablizer 120 KVA capacity complete all as specified and as directed.

S & F in replacement of Volt meter of Range 0 to 300V (Digital/analog) complete all as specified and as directed.

S & F in replacement of Volt meter of Range 0 to 500V (Digital/analog) complete all as specified and as directed

S & F in replacement of Ampere meter of Range 0 to 500 Amps with suitable size of C.T. (Digital/analog) for servo type voltage stablizer 120 KVA capacity complete all as specified and as directed.

S & F in replacement of P.C.B. holder for servo type voltage stablizer 120 KVA capacity complete all as specified and as directed. Make : Volina or equivelant

S & F in replacement of Trigger Transformerfor servo type voltage stablizer 120 KVA capacity complete all as specified and as directed. Make : Volina or equivelant

S & F in replacement of Servo motor 10 K.G. torque for servo type voltage stablizer 120 KVA capacity complete all as specified and as directed.

S & F in replacement of R.C. net work for 10 K.G. motor for servo type voltage stablizer 120 KVA capacity complete all as specified and as directed.

S & F in replacement of Carbon Brush for servo type voltage stablizer 120 KVA capacity complete all as specified and as directed.

S & F in replacement of finger holding carbon brush for servo type voltage stablizer 120 KVA capacity complete all as specified and as directed.

Dehydration of 11 KV existing transformers oil minimum three cycles to achieve dielectric strength up to 60 KV in 2.5 mm gap electrode including toping up of oil if required at site . Note (i) Dehydration of transformer oil shall be carried out at site and contractor shall be taken the testing result before and after dehydration of oil and shown to the EIC at site and maintain necessary documents for record . (ii) Dehydration Machine with all T&P & Transformer oil testing machine for dehydration of Transformer oil and necessary transportation for the machines is arrange by contractor . (iii) Oil required for topping up the transformer stabilizer will be measured & paid separatly

Supply and topping up of new low viscosity transformer oil from sealed drums confirming to IS 335-1993 Part-II after testing the correct dielectric strength up to 60 KV at 2.5 mm gap duly de-hydrated complete all as specified and directed.

Comprehensive maintence, testing/Servicing and repair including preventive and periodical maint with renewals and replacement of defective parts of all existing fire alarm system complete & 100 % servicing of fire alarm panel, smoke/heat detector/response indicator, Hooters, Manual call points complete including checking, cleaning of fire detector by removing dust or dirt, cleaning of heavy greasy deposit if any, checking the connection of battaries, specific gravity of electrolyte, the alarm function control panel and indicating eqpts be checked by the operation of trigger device in each zone as described the system installedAirwing area, addressable type fire alarm system complete all as specified and as directed.

Taking down old unserviceable multisensor detector any type by moveable ladder complete all as specifed and directed

Supply and fix Addressable type multisensor detector with heat and smoke combination complete all as specifed and directed

Taking down old unserviceable hooter any type complete all as specifed and directed

Supply and fix hooter addressable type complete of exisitng specification all as specifed and directed

Excavation in trenches in any type of soil i.e. loose/soft not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in width and getting out complete all as specified and as directed by Engineer-In-Charge.

All as per item No. 148 above but in hard/dense soil/cutting of road/hard standing/breaking of PCC etc.

Returning, filling and including spreading, leveling and watering and well ramming in layers not exceeding 25 cm to achieve desired compactness as directed by Engineer-In-Charge.

Removing of excavated material/soil to a distance not exceeding 50 Mtrs and depositing at a level not exceeding 1.5 Mtr above the starting point all as directed by Engineer-In-Charge.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregates) for repairing of valve chamber foundation etc including filling in road cuts/ hard standing etc all as specified and as directed.

M&L for Brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6, complete all as specified.

M&L for 10mm thick cement plastering in cement mortar 1:6 on brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed

Attending complaints of no water / leakage of water by removing float valve, water meter, stop cock etc or GI/composite tubing of size 15mm to 20mm bore upto 0.3 mtr length including all GI fittings like elbow, socket, Tee, Nipple, bend, union etc and making new threads as required at site including excavation,return refilling and removing soil & earth work etc. complete all as specified and directed.

All as per item No 155 but for 25mm bore

All as per item No 155 but for 40mm bore

All as per item No 155 but for 50mm bore

All as per item No 155 but for 80mm bore NOTE for Ser item No 155 to 158 : - (i) The cost of GI pipe upto 0.3 mtr and GI fittings shall be included in the quoted rated. (ii) Excavation and earth work required shall be measured and paid seperately. (iii) Complaints of urgent nature will be attended round the clock including Sunday & holiday to restore the water supply. (vi) Dewatering of accumulated water using engine driven pump set etc is deemed to be included in quoted rate. (v) Complaints given to contractor shall be rectified within 24 hrs. (vi) A penality of Rs 500/- per complaint will be charged for not attending the complaints and complete all as specified and directed.d within 48 hours. (vii) Contractor will arrange all the T&P/Diesel pumps for dewatering where ever required.

Taking up/out cast/ Ductile iron water mains including all fittings with spigot and socketed ends or flanged ends including burning out lead joints or dismantling flanged joints for pipe of following bore complete all as specified and directed. Note: (i) Excavation and earth work shall be measured and paid separately. Pipe of 80mm bore

All as per item No 160 but Pipe of 100mm bore

Laying, jointing and testing cast iron/ ductile iron water pipes with flanged end or spigot and socketed ends here-in-before in any length including cleaning, cutting for reducing length as required, jointing as in trenches for following bore in new or old locations. (Excavation, earth work, joints, threading & CI specials shall be measured and paid separately). Pipe of 80 mm bore

All as per item No 162 but Pipe of 100mm bore

Material & labour for laying, jointing and testing Ductile iron water pipes 200mm bore class K-9 conforming to IS, in any length including jointing with push on rubber tyton joints, as in trenches of following bore in new or old locations. (Excavation, earth work & DI specials shall be measured and paid separately. However, the rate of Rubber tyton joints shall be included in the unit rate quoted).

All as per Item Sr No.164 but 150mm bore class K-7 complete all as specified and directed.

All as per Item Sr No.164 but 100mm bore complete all as specified and directed.

Supply Laying, jointing and testing cast iron water pipes with flanged end or spigot and socketed ends in any length including cleaning, cutting for reducing length as required, jointing as in trenches for 80 mm bore in new or old locations. (Excavation, earth work, joints, threading & CI specials shall be measured and paid separately).

Cutting existing cast iron pipe of following bore of any description for insertion of fittings and setting the pipe in proper alignment complete all as specified and directed. (Excavation earth work and fittings shall be measured and separately). Pipe of 80 mm bore

All as per Item Sr No.168 but Pipe of 100mm bore

Material and labour of Run lead joints in repair including extracting old lead while removing the old joint to the following bores of water Supply Lines with spigot & socket ends including necessary earth work excavation in soft loose soil up to 1.5 mtr width and 1.5mtr depth returning and filling and well ramming including watering as required complete all as specified and directed by Engr-in-Charge. Note:- (i) The Joints are meant for laying new / old pipe & fittings and where Independent leaking joints to be ordered. (ii) Old lead as retrived may be used by the contractor under this item. Additional lead as required shall be arranged by the contractor. (iii) Excavation and earth work for independent joints shall be measured and paid separately. Pipe of 80mm bore

All as per Item Sr No.170 but Pipe of 100mm bore

Run lead joint to the following bore CI pipe with spigot & socket ends complete all as specified & directed. Pipe of 80mm bore

All as per Item Sr No.172 but Pipe of 100mm bore

All as per Item Sr No.172 but Pipe of 150mm bore

Taking up or down old unsv steel water tubing of following bore from trenches or walls etc. complete all as directed. (Excavation and earth work shall be measured and paid separately). Pipe of 15mm bore

All as per Item Sr No.175 but Pipe of 20mm bore

All as per Item Sr No.175 but Pipe of 25mm bore

All as per Item Sr No.175 but Pipe of 40mm bore

All as per Item Sr No.175 but Pipe of 50mm bore

All as per Item Sr No.175 but Pipe of 80mm bore

Supply & Laying, Jointing Galvanized steel water tubing, medium grade of following bore, screwed and socketed joints with and including all required fittings as in trenches, floors, on walls etc complete all as directed. (Excavation and earth work for fixing in old location already considered in items for taking out and for new locations if required the same shall be paid separately). Pipe of 15mm bore

All as per Item Sr No.181 but Pipe of 20mm bore

All as per Item Sr No.181 but Pipe of 25mm bore

All as per Item Sr No.181 but Pipe of 40mm bore

All as per Item Sr No.181 but Pipe of 50mm bore

All as per Item Sr No.181 but Pipe of 80mm bore

Supply and fix in replacement gun metal glove or gate valve heavy duty ISI marked class-1 with iron wheel head, screwed both ends for iron pipe of following bore complete all as specified and directed Pipe of 15mm bore

All as per Item Sr No.187 but Pipe of 20mm bore

All as per Item Sr No.187 but Pipe of 25mm bore

All as per Item Sr No.187 but Pipe of 40mm bore

All as per Item Sr No.187 but Pipe of 50mm bore

Supplying and fixing in replacement cast iron sluice valves ISI marked with hand wheel suitable for pipe of 150 mm bore, both ends flanged rating PN-1.0 with SS spindle including jointing with New MS nuts and bolts, washers and gasket etc all as specified and directed

All as per item Sl.No 192 but for pipe of 100 mm bore

All as per item Sl.No 192 but for pipe of 80 mm bore

Construction of masonry pits of following size (internal size) for sluice valves with sub Class 'B' bricks straight or curved or plan exc 6 mtr mean radius built in CM 1:6 PCC 1:3:6 in foundation, 15 mm thick plaster in CM 1:4 on internal faces of walls, 40 mm thick, PCC 1:2:4 in floors including valve pit cover made out of MS sheet 2 mm thick with angle iron 40x40x6 mm frame with fixing hinges, locking arrangement hold fastand handle etc duly painted with two coats of synthtic enamel paint over a coat of red oxide primer including necessary excavation & earth work complete all as specified inclding breaking of existing broken/ damaged valve pit the contractor can utilize retrived serviceable bricks. Size 60x60x60cm

All as per item Sl.No 196 but Size 90x90x90cm

All as per item Sl.No 196 but Size 120x120x90cm

Supply and fix Cast iron/ ductile iron fittings of size upto 300 mm bore for spigot and socketed pipes e.g. Bends (any type, radius and angle). Tapers any type (Straight, end, increasing, decreasing or double socket etc). Tee pieces single branch, 'Y' junctions double branches, crosses (all sockets or socket and spigot) collars caps and plugs conforming to Is complete all as specified and directed. (Excavation, earth work, & joints shall be measured and paid separately).

Supply and fixing 'D' joint complete set including nuts/bolts and rubber ring for repair to GI/ CI / DI pipe line of following size complete all as specified. Note:- Exc and earth Work shall be measured and paid separatly. Pipe of 50 mm bore

All as per item Sl.No 199 but Pipe of 80 mm bore

All as per item Sl.No 199 but Pipe of 100 mm bore

All as per item Sl.No 199 but Pipe of 150 mm bore

Materials and labour for drilling & tapping CI/DI/GI water mains of any size ( in position) for branch connection of the internal dia of size 20 mm including supply and fixing plain brass ferrules screwed both end 20mm bore and necessary earth work complete all as specified and directed by Engr-in-charge.

Repair to sluice valve installed at existing line of following bore by opening up, necessary repair comprising replacement of glands, gland packing, gaskets, facing the gate & valve seat, replacement of nut bolts, reassembling and fixing in position & testing complete all as directed. Note: -(i) Necessary arrangements for regulating the water supply in line for the purpose of repair shall be made by contractor at his own expenses. (ii) MS Spindle shall be measured and paid separately in the under mentioned item. Pipe of 80mm bore

All as per item Sl.No 204 but Pipe of 100mm bore

All as per item Sl.No 204 but Pipe of 150mm bore

Supply and replace MS Spindle complete all as specifiedand directed. Pipe of 80mm bore

All as per item Sl.No 207 but Pipe of 100mm bore

All as per item Sl.No 207 but Pipe of 150mm bore

Supply and fixing in replacement Bib Tap size 20mm bore dia of pipes standard PTMT and colour high pressure screwed for iron pipe and fixed with nipple/ elbow and socket if required all as specified and directed.

M&L for valve pit chamber cover in repair with 3mm thick sheet cover including angle iron frame 40x40x5mm duly painted with locking arrangement of size upto 1100x1100mm (or any fabrication required at site) with PCC for fixing of the same complete all as specified and directed by Engr-in-charge

Supply & Fix in replacement of FRP hypo-chlorine powder granules solution preparartion cum setting tank capacity 100 Ltrs with lid, port hole, inlet/outlet/drain connection level gauge etc and fitted with 1 phase 0.5HP motor and agitator rod complete with wiring all as specified and as directed by Engineer-in-charge

Supply & Fix in replacement of Decrin Dosing Pump, Pump Tube And White Suction 1 Decrin Dosing Pump, High Pressure Single Head Gear Motored Adjustable Dosing Pump With All Accessories with Pump Tube, injection check valve,foot valve, strainer etc - 02 Set spare,

Lifting / taking out the defective submersible pump motor set of any capacity and description / make, any depth from bore well by lifting tolls , chain pulley etc all as required carefully, by disconnecting / dismantling all electric connections, column pipes of size 100 mm etc and transporting the defective pump motor set to workshop, lowering the same /repaired/ new serviceable submersible pump or motor set to the existing location including replacing the rubber packing/ GI nut bolts of the column pipes etc of suitable size where ever required complete all as specified and as directed by Engr-in-charge.

M&L and T&P for rewinding of monoblock motor 3 Hp complete all as specified and as directed by Engineer-in-Charge.

M&L and T&P for repair of monoblock pump 03 Hp including seals, bush, bearings impellers etc complete all as specified and as directed by Engineer-in-Charge.

M&L and T&P for rewinding of submersible motor 5 Hp complete all as specified and as directed by Engineer-in-Charge.

M&L and T&P for repair of submersible pump 5 Hp including seals, bush, bearings impellers etc complete all as specified and as directed by Engineer-in-Charge.

M&L and T&P for rewinding of submersible motor 15 Hp complete all as specified and as directed by Engineer-in-Charge.

M&L and T&P for repair of submersible pump 15 Hp including seals, bush, bearings impellers etc complete all as specified and as directed by Engineer-in-Charge.

M&L and T&P for rewinding of submersible motor 10 Hp complete all as specified and as directed by Engineer-in-Charge.

M&L and T&P for repair of submersible pump 10 Hp including seals, bush, bearings impellers etc complete all as specified and as directed by Engineer-in-Charge.

M&L and T&P for rewinding of submersible motor 20 Hp complete all as specified and as directed by Engineer-in-Charge.

M&L and T&P for repair of submersible pump 20 Hp including seals, bush, bearings impellers etc complete all as specified and as directed by Engineer-in-Charge.

M&L and T&P for rewinding of submersible motor 25 Hp complete all as specified and as directed by Engineer-in-Charge.

M&L and T&P for repair of submersible pump 25 Hp including seals, bush, bearings impellers etc complete all as specified and as directed by Engineer-in-Charge.

M&L and T&P for rewinding of sewage motor 12.5 Hp complete all as specified and as directed by Engineer-in-Charge.

M&L and T&P for repair of sewage pump 12.5 Hp including seals, bush, bearings impellers etc complete all as specified and as directed by Engineer-in-Charge.

Collection of water samples (with and without chlorination) from following bore wells/sumps in sterilized bottles all as per the standard instructions and guidelines of the Chief Water Analyst of Department of water and Sewage examinations from any NABL approved LAB, transporting the samples safely and getting the same tested for chemical and bactyeriological tests, with and without chlorination test from the same Institute and report submitted to this office complete all as specified and directed. Pump house ARC camp

All as per item Sl.No 229 but Pump house Airwing area Note : The water samples (with and without chlorination) shall be counted as 01 set of sample.

M&L for opening of pumpset from the installed position, dismantling of pump and motor assembly, complete servicing and cleaning of pumpset and refixing the same to the installed position complete all as directed and specified

M&L for MCCB 100 Amp 4 pole 415 V, 50 Hzs, 25 KA including taking out old U/S one, complete all as specified and as directed by Engineer-in-Charge.

M&L for MCCB 125 Amp 4 pole 415 V, 50 Hzs, 25 KA including taking out old U/S one, complete all as specified and as directed by Engineer-in-Charge.

M&L for Power Contractor 3 pole 3 phase Standard coil voltage 240/415 V, 50 HZ, Auxiliary contacts 2 NO+ 2 NC, Current rating 40 Amps,

M&L for Power Contractor 3 pole 3 phase Standard coil voltage 240/415 V, 50 HZ, Auxiliary contacts 2 NO+ 2 NC, Current rating 32 Amps,

M&L for Painting of entire OH tank after complete removal/scrapping of old surface, one coat wall primer and two coat of cement based paint.

M&L for painting on MS/steel structures/member of OH tanks of height upto 25RM after complete removal of existing paint then apply one coat of red oxide primer and two coat of synthetic enamel paint complete.

Supply & Laying, Jointing/welding PPR water pipes,mono-layer PN 16 grade of following bore, including all required fittings as in trenches, floors, on walls etc complete all as directed. Pipe of 15mm bore

All as per item Sl.No 238 but Pipe of 20mm bore

S&F in repair/replacement of submersible cable with size 4 Sqmm 3 core all as specified and directed

Comprehensive, preventive and periodical maintance of 01 No . electrically operated RO of capcity 1000 LPH installed at ARC Campus to be maintained round the clock as described here-in after in reliable and efficient operating condition by regularly examine all the filters , pumps , tanks , membrane sand media , Antiscalent, UV and other electrical parts using techniques and expertise consultancy including replacement of spares parts as and when required all as directed and specified to the entire satisfaction of Enginee-in-Charge.

Supply only High Strength Calcium based granular disinfectant for water treatment, in factory sealed non returnable HDPE containers (40 to 50 Kg each) having chlorine concentration level 65% or above complete all as specified and directed Note- the contractor must submit the Certificate of compliance in origional from manufactures by all india authorised MES distributor for each batch of product delivery indicating including chemical report by all india distributer.

M&L for attending complaint related to starter panel of pump house and rectifying the deffects including minor parts completem all as specified and directed.

S& F of Submersible pump starter star delta type 3 Phase metal enclosed suitable for 15 hp capacity complete all as specified and directed.

Raman Electric Trading Co

RAJAN TRADERS

Baliyan Electrical Works