REPAIRS TO ROOF COVERING, FLASE CEILING, JOINERY, PLASTERING, FLOORING, PLUMBING, SANITARY FITTINGS AND CONNECTED WORKS TO OTM ACCNS MLIRC, SRI, SIGNAL, RECORDS MLIRC PAO OFFICE MLI AND OFFICERS MESS MLIRC UNDER GE BELGAUM.

Amount

Taking down chowkhat with shutters (without taking off shutters from the frame) area n exc 1.50 Sqm each and taken as credit complete all as specified and as directed.

Taking down chowkhat with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n exc 4 Sqm each and taken as credit complete all as specified and as directed.

Taking down chowkhat or frame area n exc 1.50 Sqm each and taken as credit complete all as specified and as directed.

Taking down chowkhat or frame area exc 1.5 Sqm and n exc 4 Sqm each and taken as credit complete all as specified and as directed.

Taking down shutters of any description area exc 1 sqm and n.exc 2 sqm each and taken as credit complete all as specified and as directed.

Taking down shutters of any description area exceeding 2 sqm each and taken as credit complete all as specified and as directed.

Demolition of Plain cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thick below or above ground level in any mortar including removal of rubbish off the premises completeall as specified and as directed.

Dismantling structural steel work including doors, gates etc and taken as credit complete all as specified and as directed.

Supply and fix 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc, complete all as specified and as directed.

Material and labour for Plain cement concrete 1:4:8 type D2, using 40mm graded stone aggregate in foundation, filling, mass concrete, levelling courses and sub bases complete all as specified and as directed.

Material and labour for Plain cement concrete 1:3:6 type C2, using 40mm graded stone aggregate in foundation, filling, mass concrete, levelling courses and sub bases complete all as specified and as directed.

Material and labour for Pre-cast cement concrete solid block masonry, exc 10 cm width, blocks cast in PCC 1:3:6, type C1, using 20 mm graded stone aggregate and setting in CM 1:6 including demolition of old unserviceable precast concrete masonry of any description and taken as credit complete all as specified and as directed

Material and labour for PCC 1:4:8 (type D-2) using 40 mm graded stone aggregate , 100 mm thick as in sub base to floor including necessary form work complete all as specified and as directed.

Material and labour for PCC 1:2:4 (type B-2) using 40 mm graded stone aggregate , 50 mm thick as in floor including necessary form work complete all as specified and as directed.

Material and labour for Providing PCC 1:3:6 type C2 (using 40mm graded stone agg) as in plinth protection 75 mm thick finished surface even and smooth without using extra cement including necessary form work completeall as specified and as directed.

Material and labour for PCC 1:2:4 type B2 ( using 40mm grade stone aggregate ) as in cement concrete in surface channel and drain including necessary form work complete all as specified and as directed.

Extra for forming fair finished drains or channels 45cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling plain or corrugated steel sheeting of any description, thickness in roof coverings and taken as credit complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling plain or corrugated steel sheeting of any description, thickness in roof coverings and taken as credit complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Material and labour for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls, etc. fixed with J-type or L-type hooks including dismantling of old unserviceable asbestos cement (corrugated, semi corrugated, translucent etc.) sheets in roof coverings and plain or corrugated steel sheeting, any gauge, thickness in roof coverings and taken as credit complete all as specified and as directed. Note :Make of asbestos cement sheet : Ramco/ Shalimar

Material and labour for 6 mm thick asbestos cement two piece adjustable serrated ridge for corrugated or semi-corrugated sheets in roofs fixed with ‘L’ type or ‘J’ type or cranked hook bolts including dismantling plain or corrugated steel two piece adjustable serrated ridge any gauge, thickness in roof coverings and taken as credit complete all as specified and as directed . . Note :Make : Ramco/ Shalimar

Supply and fix 2mm thickness fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in roof, wall etc including dismantling wrought iron or mild steel sheet of any description and in any position and taken as credit complete all as specified and as directed.(ISI Marked )

Supply and fix Rolled mild steel roof trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confiming to Fe 410 -W (Gde E- 250) quality A, including dismantling wrought iron or mild steel work of any description and in any position and taken as credit complete all as specified and as directed.

Supply and fix Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed.

Supply and fix High pressure steam cured (HPSC) non asbestos fibre cement building board 4mm thick in false ceiling with aluminum anodized snap grid of size 60cm x60cm in ceiling with Tee section of size35x25x1.25mm,angle section of size25x25x1.25mm thick including 2mm dia GI hanging wire and all hanging fittings etc and applying three coats of white wash on exposed surfaces of ceiling including dismantling old ceiling and wall boards or insulation board any thickness including cover fillets etc and taken as credit complete all as specified and as directed. Note : (i) Make of HPSC Board : EVEREST /ARMSTRONG (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco .

Material and labour for Providing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over and including provision of 2nd class soft wood fillets, or metal frame work and reinforced with G.I. Wire mesh, fixed in ceiling flat or sloping with anodised aluminium snap grid frame work for flase ceiling size of grid 605 mm x 605 mm including 2mm dia GI hanging wire and all hanging fittings etc and applying two coats of distemper oil emulsion on surface ceiling including dismantling ceiling and wall boards or insulation board any thickness including cover fillets etc and taken as credit complete all as specified and as directed.Note : (i) Make of gypsum anhydrous : EVEREST /ARMSTRONG /Gypsum (India) Ltd (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco .

Supply and fix Factory Made Solid PVC Moulded Door Shutter, 30mm thick (stiles)consisting of frame made out of M.S.tubes for top & bottom rails.M.S. frame shall be covered wire heat strips of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,for fully gauzed,panel will be of wire gauze in lieu of single side prelam pvc sheet panel,the wire gauze shall be wrapped on an additional square 8mm M.S.tubes.the wire gauze shall be stretched to tighten firmly with beading, and joined together with solvent cement, and fixed in the frame at site all as per specification & drawing complete all as specified and as directed.

Supply and fix PVC door frame of size 50mm X 47mm made out of 5mm thickwood grain printed PVC sheereinforced with MS square tube and fixing in opening and edges painted to match printed sheet, etc complete all as specified and as directed.

Supply and fix Factory made 2nd class hard wood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc,sizes of members of shutters as specified in SSR part I, Section 8, clause 8.24 (a),fitted to chowkat etc complete all as specified and as directed.

Repairs to loose hanging mild steel window/ ventilator shutters of size not exceeding 1sqm each including repairs to hardwares by welding for smooth functioning of the shutters and making good the welded surfaces to match with the existing window/ ventilator surface complete all as specified and as directed. Notes: (i) Window/Ventilator shutter are to be rerpaired to the buildings upto 3 stories height.Necessary safety measures of the laboureres engaged in the work shall be the resposibility of the contractor .The rate quoted by the contractor for this item shall be inclusive of the above provisions (ii) Hardwares wherever required to be replaced shall be measured and paid separately under respective items in this BOQ as supply only .

Supply and fix in repairs 300mm long mild steel helical door spring, ordinary rat tail pattern spring, including roller and roller plate complete all as specified and as directed. Make :Classic/Crown/Adarsh

Supply and fix in repairs 100 mm long medium weight, cold rolled mild steel, Butt hinges complete all as specified and as directed. Make :Classic/Crown/Adarsh

Supply and fix in repairs 200 mm long of Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.Make:Crown/Classic/Adarsh

Supply and fix in repairs 150 mm long of Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.Make:Crown/Classic/Adarsh

Supply and fix in repairs 150mm extruded aluminum alloy handles, cast type, anodized complete all as specified and directed.Make:Crown/Classic/Adarsh

Supply and fix in repairs 300mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts plate type with bright bolt not less than 12mm dia complete all as specified and as directed. Make:Crown/Classic/Adarsh

Supply and fix floor door stopper of aluminium body and tongue anodised with 150mm long cover plate and hard drawn steel spring, fixed in floor complete all as specified and as directed. Make :Crown/Classic/Adarsh

Supply and fix in repairs Aluminium (die cast body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.Make :Everite/Hardwyn (ISI MARKED)

Supply and fix in repairs,harrison rail , stainless steel,chromium plated curtain rods, fancy type, 25mm dia including brackets ,stops and rollers with end designer caps including wooden nobs complete all as specified and as directed. Make :Classic/Crown/Adarsh

Material and labour for 3mm thickk sheet glass ordinary quality and glazing with oil putty/ wooden beads in square exc 0.5 Sqm in each pane including hacking out old broken glass panes any thickness ,size and quality from wooden frames and removal from site complete all as specified and as directed. .Make :Saint gobain/Modi Guard/Gold fish

Material and labour for 4mm thickk sheet glass ordinary quality and glazing with oil putty/ wooden beads in square exc 0.5 Sqm in each pane including hacking out old broken glass panes any thickness ,size and quality from wooden frames and removal from site complete all as specified and as directed. .Make :Saint gobain/Modi Guard/Gold fish

Material and labour for 4mm thk sheet glass ordinary quality , ground or obscured or frosted, on one side and glazing with oil putty/ wooden beads in square exc 0.5 Sqm in each paneincluding hacking out old broken glass panes any thickness ,size and quality from wooden frames and removal from site complete all as specified and as directed. .Make :Saint gobain/Modi Guard/Gold fish

Material and labour for Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc.complete all as specified and as directed.. Make :Classic/Crown/Adarsh/ M/S Rajshri Platiwood Ltd , Indore .MP

Supply and fix Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. .complete all as specified and as directed..Note : (i) Minimum thickness of powder coating shall be of 50 micron (ii) Make of aluminium section : Jindal/Indal/Hindalco .

Supply and fix Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, locking arrangement, etc. complete all as specified and as directed .Note : (i) Thickness of aluminium anodisation shall be of 15 microns . (ii) Make of aluminium anodised section : Jindal/Indal/Hindalco

Supply and fix Aluminium anodised doors of standard section of size 64x38x1.4mm for frame and section size 47x25x2mm for vertical style section of size 46.72x44.45x1.4mm for top and central rail section of size95x44.45x2mm for bottom rail,section size of 19x17.3x0.80mm for glazing clip for shutter including fabrication to required size and fixed with 5mm thick sheet frosted glass in top panel and 4mm thick aluminium composit panel board including fitting etc with door closer,handle,mortise lock heavy duty and door spring heavy duty etc complete all as specified and as directed. .Note : (i) Thickness of aluminium anodisation shall be of 15 microns . (ii) Make of aluminium anodised section / Panel board : Jindal/Indal/Hindalco (iii) Make of frosted glass : Saint gobain/Modi guard/ Gold Fish

Supply and fix Aluminium sliding windows (Triple track), fabricated to required size with standard aluminium anodised sections, with bottom track of size 92 x 31.75 x 1.6mm, side and top frame of size 92 x 31.75 x 1.4mm, top and bottom shutter rail of size 39x17x1.4mm, outer style of size 39 x 17 x 1.4mm, interlock style of size 39 x 27 x 1.4mm, including provision of 4mm sheet frosted glass for panels including provision of all hardware fittings such as handles, locking arrangements, rubber gaskets, rollers, spring catchers etc. complete all as specified and as directed . .Note : (i) Thickness of aluminium anodisation shall be of 15 microns . (ii) Make of aluminium anodised section : Jindal/Indal/Hindalco (iii) Make of frosted glass : Saint gobain/Modi guard/ Gold Fish

Supply and fix in repairs Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed .

Supply and fix in repairs Mortice lock, brass body ,vertical type, size 100 mm 4 lever and fixed complete all as specified and as directed . Note :Make :Godrej/Dhanraj/Harrison

Material and labour for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match including screed bed or bedding layers 15 mm thick in cement mortar (1:6) for laying floor finishes including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing, rubbish off the premises all as specified and directed.complete all as specified and as directed. Make of Tile :HR Johnson/Khajaria/Naveen

Material and labour for Premium quality Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match including screed bed or bedding layers 15 mm thick in cement mortar (1:6) for laying floor finishes including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing, rubbish off the premises all as specified and directed..complete all as specified and as directed.. Make of Tile :HR Johnson/Khajaria/Naveen

Material and labour for Premium quality Glazed ceramic tiles of size 350x450 x 7mm thick on dado & skirting , set and jointed in neat cement slurry and pointed in white or colored cement to match including 10 mm thick rendering with rough finished in cement mortar 1:4 to received tile including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing, rubbish off the premises all as specified and directed. etc complete all as specified and as directed. Make of Tile :HR Johnson/Khajaria/Naveen

Material and labour for Premium quality coloured glazed ceramic tiles 300mm x 200mm x 7mm thick on vertical surfaces such as skirting, dados etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with surfaces including 10mm thick backing coat in CM 1:4 including dismantling of existing unserviceable tiling alongwith cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed. Make of Tile :HR Johnson/Khajaria/Naveen

Material and labour for Granite slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over screed bed or bedding layer of mortar 15 mm thick for laying of granite slab in CM 1:4 and dismantling of existing un serviceable stone slab alongwith cement mortar bedding ,removal of rubbish off the premises complete all as specified and as directed

Material and labour for Machine cut Granite stone tiles, 20mm thick, as in risers of steps, skirting, dado, cladding to pillars, etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of the tiles including bull nosing the edges, rubbing and polishing complete and with 10mm thick backing coat in CM 1:4 including dismantling stone slabs and tiles of any description or thickness in floors, aprons, laid or laid dry and pointed etc ,removal of rubbish off the premises complete all as specified and as directed

Material and labour for Mirror polishing on marble/ granite/ Kota stone/ stone flooring/skirting/dado where ever required to give high glossy finish complete all as specified and as directed.

Material and labour for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footparth, parks, lawns, drive ways or light traffic parking area etc., of required strength, thickness and size/shape, made by table vibratory method using PU mould, laid and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping with extra sand etc, complete all as specified and as directed.

Material and labour for Rubber moulded chequered cement concrete tiles of size 20cm x 20cm x 25mm thick, with grey cement and pigments, set jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, etc. complete all as specified and as directed.

Material and labour for 10mm thick Rendering on fair faces of concrete surfaces in CM 1:4 and finished the surfaces fair and even without extra cement complete all as specified and as directed.

Material and labour for Rendering 5mm thick in cement mortar 1: 4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on other than fair faces of brick work or stone masonry surfaces finished even and smooth without using extra cement, including taking down old cement plaster on brick or stone wall or ceiling concrete etc. including racking out joints hacking for key scrubbing down with water etc and removal of rubbish off the premises complete all as specified and as directed.

Supply only integral water proofing compound . Note ;Impermo/Roff/Cico

Material and labour for Rendering 10mm thick in CM 1:6 on brick surfaces , finished even and smooth without using extra cement including taking down cement plaster on brick or stone wall or ceiling concrete etc . including racking out joints hacking for key scrubbing down with water etc and removal of rubbish off the premises complete all as specified and as directed.

Material and labour for applying two coats of 100 % premium acrylic emulsion paint having VOC less than 50 gm/litre and uv resistance as per IS 15489:2004, alkali & fungal resisatance , dirt resistance , exterior paint of required shade (Company depot tinted ) with silicon additive @1.43 Litres /10 sqm over and including priming coat of exterior primer applied @ 0.90 Litres /10 sqm over new surface complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces on walls and applying two coats of oil bound distemper over a preparatory coat of chalk whiting on plastered surface and over a coat of priming plastered and other surfaces with alkali resistant priming paint etc, completed all as specified and as directed.

Material and labour for Preparation of old painted steel surfaces of any descripation over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for Preparation of old painted surfaces of wood and wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and asdirected.

Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for Preparation of old decorated plastered ceilling surfaces and applying one coat of distemper oil emulsion complete all as specified and as directed.

Material and labour for Preparation of old decorated plastered wall surfaces and applying two coat of distemper oil emulsion complete all as specified and as directed.

Material and labour for Complete removal of existing treatment on walls and Preparation of old decorated plastered wall surfaces and applying two coats of oil bound distemper over a preparatory coat of 1mm thick wall care putty etc, completeall as specified and as directed.

Supply and fix in repairs 110mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Material and labour for 32 mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead, cement and other end fixed in repairs etc complete all as specified and as directed .

Supply and fix in repairs 75 mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix in repairs 110mm bore UPVC (SWR) bends any radius with access door complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix in repairs 75 mm bore UPVC (SWR) bends any radius with access door complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix in repairs 110mm bore UPVC (SWR) branch piece, single (single Y) equal or unequal with access door complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix in repairs 75 mm bore UPVC (SWR) branch piece, single (single Y) equal or unequal with access door complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix in repairs110mm bore UPVC (SWR) branch piece, double (double Y) equal or unequal with access door complete all as specified and directed. Note : Make : Finolex/Supreme/Prince

Supply and fix in repairs75 mm bore UPVC (SWR) branch piece, double (double Y) equal or unequal with access door complete all as specified and directed. Note : Make : Finolex/Supreme/Prince

Supply and fix in repairs 110mm bore UPVC (SWR) junction, single (single T) equal or unequal with access door complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix in repairs UPVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm dia outlet complete all as specified and directed. Note : Make : Finolex/Supreme/Prince

Supply and fix in repairss UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cementcomplete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix in repairs PVC flexible pipe (waste pipe), suitable for 32 mm bore waste coupling of sink/ wash hand basin complete all as specified and as directed.Make :Kohinoor (ISI Marked)

Supply and fix in repairs Stainless steel gratings with frame, dome type, 125 mm dia, with or without hole for waste pipe connection complete all as specified and as directed.

Supply and fix in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.Make : Jaquar/CERA /MARC

Supply and fix in repairs CON-041KN 2 Way Bib Cock complete all as specified and as directed. Make : Jaquar or equivalent product of Parryware Cat No : G4734A1 Two Way Bib Cock / Hindware Cat No : F330004CP Bib Cock 2 in 1 as approved by GE.

Supply and fix in repairsVitreous China Urinal, Half stall type, white including providig and fixing plugs ,bedding urinal against wall in cement mortar 1:2 ,securing urinal to plugs with and including 60 mm long brass screws ,pointing around urinal back in cement complete all as specified and as directed.

Supply and fix in repairsVitreous China Urinal, Full stall type, white including providig and fixing plugs ,bedding urinal against wall in cement mortar 1:2 ,securing urinal to plugs with and including 60 mm long brass screws ,pointing around urinal back in cement complete all as specified and as directed.

Supply and fix in repairs Toilet paper holder with flat recessed type stainless steel complete all as specified and as directed.Make : Jaquar/CERA /MARC

Supply and fix in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.Make : Jaquar/CERA /MARC

Supply and fix in repairs Tubular towel rail, Brass chromium plated 20mm dia, D type, 60cm long between flanges .including Chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

Supply and fix in repairs Vitreous china wash down water closet pan (pedestal pattern) white fixing with MS bolts on existing surface and making good the disturbed surface complete all as specified and as directed .

Supply and fix in repairs Vitreous China wash down colset pan (pedestal pattern),LYS-WHT-38751S250UFSM Bowl for Coupled WC with UF soft close slim seat cover, Hinges, Fixing Accessories and Accessories Set, Size:380x660x765 mm, S Trap-250mm, LYS-WHT-38201 Cistern with cistern fittings for 38751P180UFSM & 38751S250UFSM Set complete all as specified and directed. Make : Jaquar or equivalent product of Parryware Stanza Cat No : C847I (S-285mm) (685x370x735) White / Hindware Italian Collection ELBA / RIMLESS Cat No : 92528 (S-22/S-30)) 62x37x67 cm Pastel as approved by GE.

Supply and fix in repairs, 15 mm bore bib taps , standard of PTMT any colour , screwed down, screwed for iron pipe or for brass ferrule (Minimum weight-90 gms) complete all as specifed and as directed. Note :Make Prayag /M/S Shakthi Industries

Supply and fix in repairs 15 mm bore Bib taps brass chromium plated fancy type screwed down , screwed for iron pipe or for brass ferrule complete all as specified and as directed. Note :Make : Jaquar/ Soma/ Leader//Marc

Supply and fix in repairs 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. Note :Make : Jaquar/ Soma/ Leader//Marc

Supply and fix in repairs PVC connection 15mm size with PTMT nuts, 450mm long complete all as specified and as directed. Make :M/S Prayag/M/s Shakthi Industries

Supply and fix in repairs 15mm bore Brass CP basin mixer for mixing hot and cold water screwed down , screwed for iron pipe including two joints to steel pipes or unions and plugging and screwing to walls complete all as specified and as directed. Make :M/S Prayag/M/s Shakthi Industries

Supply and fix in repairs 15mm bore of long shank concealed Stop valves, CP fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. Note :Make : Jaquar/ Soma/ Leader//Marc

Supply and fix in repairs Chromium plated shower rose with swivel joints of any colour for fixing with 15mm pipe. (Minimum weight 40gms) with Shower arm 15 mm size, 195mm long with bend of 45degree with flange, (Minimum weight 40gms) etc,complete all as specified and as directed. Note :Make : Jaquar/ Soma/ Leader//Marc

Supply and fix in repairs 10 litre capacity PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets complete all as specified and as directed. Make : Parryware (Slim line ) / M/s Hindustan Sanitary Ware /Hindware

Supply and fix in repairs plastic water closet seat for EWC, closed pattern with flat bottom and cover, any colour as approved by GE and mild steel chromium plated or aluminium hinging device completeall as specified and as directed . Make : Parryware / M/s Hindustan Sanitary Ware /Hindware

M/s. KIRAN M CHOUGULE

M/s. N D KALING