Providing Bio and Non-Biodegradable segregation/ Storage shed near to 120 KLD ETP at CSIR-CFTRI, Mysuru

Amount

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 M sand : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Cement concrete flooring 1:2:4 (1 cement : 2 M sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 M sand)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Make: Vizag/ Appolo/ JSW

Providing and laying corrugated G.A coloured metal roofing sheet of thickness 0.45mm, 1.06m standard width with aluminium zinc alloy coated, 120 GSM powder coated having yeild strength of 450 N/mm2 including vertical/ curved surface fixed with stainless steel self tapping screws of length 55mm excluding the cost of purlins, rafters and trusses and including cutting the size and shape wherever required. 0.45mm thick with aluminium zinc alloy coated MAKE: JSW

Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 M sand)

Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed / welded/ anchoring to existing angle. MS mesh size 75x25mm, 3mm dia Note: The rate quoted is inclusive of necessary scaffolding at all heights.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture Recommended brand: asian/NEROLAC