Spl repair to unserviceable pipe and provn of sub mersible moter at Sewar fort under GE Bharatpur

Amount

Supply, laying in trenches, under floor, under road, connecting, jointing and testing ductile iron pressure pipe 100 mm dia K-7 ISI mark centrifugally cast ISI marked with socket and spigot ends confirming to IS-8329/2000 standard length with internal cement motor linging and outside zinc coating (minimum 130 grams per square metere) and bitumen finished layer (minimum thickness 70 microns) with rubber gasket joint (Tyton joints) complete all as specified and directed of the following sizes : Note :- (i) Excavation and earth work will be measured and paid separately. (ii) Rubber gasket joints shall be deemed to be included in quoted rate.

S&F GI tubing medium grade ISI marked including all fittings laid in trenches/fixed on wall of size 100 mm bore all as specified and directed.

S&F GI tubing medium grade ISI marked including all fittings laid in trenches/fixed on wall of size 80 mm bore all as specified and directed.

S&F GI tubing medium grade ISI marked including all fittings laid in trenches/fixed on wall of size 20 mm bore all as specified and directed.

S&F GI tubing medium grade ISI marked including all fittings laid in trenches/fixed on wall of size 15 mm bore all as specified and directed.

Taking up or down PVC/PP-R pipe and connection and stacking neatly for reuse and removing the balance material from site of size 15 mm bore complete all as specified and directed.

Taking up or down PVC/PP-R pipe and connection and stacking neatly for reuse and removing the balance material from site of size 20 mm bore complete all as specified and directed.

Boring of holes under road, pavement, hard standing by trenchless technology using suitable tools and machinery for laying of pipe upto 150mm bore pipe complete all as specified and as directed.

M & L Straight plain brass ferrules (or connecting screws) screwed both ends, screwed and fixed of 20mm bore complete all as specified and directed.

S&F in repairs of gun metal gate or globe valves with iron wheel head (ISI Marked), screwed both ends for iron pipe and fixed of size 20 mm bore

Cutting of CI/DI pipe of size 100mm dia and reducing to required length in position complete all as specified and as directed.

S&F of sluice valve 100 mm bore class PN-I with flanged and iron wheel head, shut and open directed cast on it and including jointing materials, rubber gasket suitable size nut bolts and washer etc complete all as specified and directed.

S&F of sluice valve 80 mm bore class PN-I with flanged and iron wheel head, shut and open directed cast on it and including jointing materials, rubber gasket suitable size nut bolts and washer etc complete all as specified and directed.

S & F Bends tapers any type, (straight, bend, increasing, decreasing or double socket etc). Tee pieces, single branch "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs of DI fittings upto 150 bore

M&L of provision of brick masonry valve pit chamber of 3mm thick MS sheet and angle iron frame of 40x40mm including black bituminous paint and 1200x1200x1000mm size (internal dimensions) including necessary excavation and earth work and frame with cover complete all as specified and directe and as shown on drowing No TD/2004/26.

Supply, erection, testing and commissioning of Submersible pump and motor capcity12.5 HP as per IS-9283 (latest) for a pumping capacity/dischrge of pump 108-112 lpm for head of 120M -240M, suitable for 50mm dia column pipe complete all as per specified and directed. Make Kirloskar pump model KS6D-1310 or equivalent mentioned in Appx 'B' approved by GE.

S&F of fully automatic star Delta starter in sheet metal enclouser suitable for submersible pump set 15 HP capacity, 415V, 50Hz, of Model No MU-G20 FASD of Make L&T equivalent in BCH/Siemens. Starter box is fixed outdoor MS panel of size 0.6 mtr height x 0.6 mtr width x 0.45 mtr depth of outdoor cubical type IP55 protection, vermin and dust proof factory made of CRCA sheet 3.15mm thick front door fixed with hinges and knobs including Masonary and concrete work for foundation of panel including MS frame for mounting of panel all as per manufacture's instructions above 0.5 mtr of the ground level complete all as specified and directed

Excavation in trenches in any type of soil n.exc 1.5 M wide and n.exc 1.5 M in depth for taking out / laying of pipe lines and getting out forming bottom surfaces to required gradients complete all as specified and as directed.

Returning, filling in and including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed

Removing excavated surplus materials to a distance not exceeding 50 Mtrs and deposited where directed at a level not exceeding 1.5 Mtr .Above starting point complete all as specified and directed.

S&F GI tubing medium grade double flange type, ISI marked including all fittings fixed on wall of size 100 mm bore all as specified and directed.

Cutting of existing road/PCC path for laying of pipe line complete all as specified and directed

M&L for PCC 1:2:4 type B-2, using 40 mm graded aggregate filling and mass concrete, road finishing, thrust/protection blocks for pipe lines all as specified and directed

Supply, install, testing & commissioning openwell submersible monoblock pump set 3 phase, 415V, 50 Hz copper wound of capacity 3 HP with cast iron impeller and stainless steel shaft complete all as specified and as directed. Cat Part No. Make Kirloskar pump model KOSJ-325 3 65x50 3P CII or equivalent mentioned in Appx 'B' approved by GE.

Supply and laying of High density poly- ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 of size 50 mm dia including necessary arrangements for coupling arrangement on top and bottom of HDPE pipe with pump and delivery pipe complete all as specified and directed.

M&L of MS work for holding of pump set on openwell including taking lowering and unlowering arrangements with necessary pulley, including gas welding machine/ electric welding to required etc as required at site complete all as specified and as directed.

S&F of DOL submersible starters for 03 HP capacity, 415V, 50Hz, in sheet metal encloser complete fixed in outdoor type MS panel of 3.15mm thick CRCA sheet vermin and dust proof with powder coated finish of size 30cmx45cmx30cm with iron stand of size 60cm height made out of angle iron frame of size 40x40x5mm thick grouted in PCC 1:2:4 of block size 45x45x30 cm complete all as specified and directed.

S&F of Nylon rope of 20mm dia of first quality suitable for hanging of submersible pump with MS stand and binded with GI wire complete all as specified and as direceted.

S&F submersible flat cable of 4sqmm, 3 core copper conductor cable suitable for 03 HP pump motor complete connection from starter panel to motor all as specified and as directed.