REPAIRS TO JOINERY PLUMBING FLOORING CHQ DEPOT BN MEANEE LINES IN THE AOR OF AGE BR MEG UNDER GE NORTH BANGALORE

Amount

Dismantling timber scantlings in fillet, rail, posts, rafter, purlins etc under 40 sq. cm in section, in any position as in framed work etc complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed

Demolition of cement concrete (un reinforced) in ground floors and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed.

Demoltion of Cement Concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each etc complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4.0 Sqm each etc complete all as specified and as directed

Taking down shutter of any description area exc 1.00 sqm but not exc 2.00 sqm and refixing in same opening etc complete all as specified and as directed

M&L MS rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality-A etc complete all as specified and as directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws etc incl dismantling of Asbestos cement (corrugated,semi corrugated, etc.) etc complete all as specified and as directed

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in ridges / valley to wall, fixed with self tapping screws incl dismantling of Ridges etc complete all as specified and as directed

M&L providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, leveling concrete , kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed

M&L for removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and 3 mm thick APP modified water proofing membrane, weight not less than 3.60kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over compatible primer/bonding bitumen @ 0.40 Litr/Sqm and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm incl screed bed 10 mm thick in CM (1:3) over concrete surface mixed with and incl water proofing compound incl taking down existing roof treatment of any types incl HP clay tiles etc along with cement plastering etc complete all as specified and directed.

S&F in repairs false ceiling with GI grid suspended system of size 600X600mm standard section consisting of main runner, cross Tee and wall angle as per mfd instruction / catalogue, ceiling suspended with 4 mm dia GI wire hanger fixed with steel dash fastner, butter fly clips, hold down clips etc (Main corner 50 x 25 x 0.65mm, cross tee 40 x 15 x 0.65mm & wall angle 25 x 25 x 0.65mm of MS galvanized with PPPCGS) incl 4 mm thick HPSC self textured design pre primered non asbestos fibre cement building boards fixed to false ceiling etc complete all as specified and as directed

S&F in repair for 10 mm thick plaster of paris ceiling (Gypsum anhydrous) including sunk or raised moulding or coving, design, pattern as decided fixed to Gl frame work with GI grid suspended system of size 600X600mm standard section consisting of main runner, cross Tee and wall angle as per mfd instruction / catalogue , ceiling suspended with 4 mm dia GI wire hanger fixed with steel dash fastner, butter fly clips, hold down clips etc (Main corner 50 x 25 x 0.65mm, cross tee 40 x 15 x 0.65mm & wall angle 25 x 25 x 0.65mm of MS galvanized with PPPCGS) for seamless including GI suspenders and joints of ceiling board shall be finished with textile tape incl two coat of distemper oil emulsion over a coat of primer etc complete all as specified and directed Notes : Rate included for GI Snap Grid work/ GI suspenders, Extra design of ceiling, nothing extra shall be admissible on this accout.

S&F 2nd class hard wood scantling clean sawn surfaces incl a coat of creosote oil painting etc complete for grid work of wall panelling fixed with nails in the wall etc complete all as specified and as directed

S&F 8mm thick Block boards, grade 1 quality, exterior grade, commercial type, Water proof, termite proof, fixed with screws to timber frame-work as in wall panelling / cub board shutte, shelves over 4mm thick MFD board, medium density, fibre board, single layer type or three layer type with BWR type adhesive, fixed with screws over 0.90 mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions etc complete all as specified and as directed incl taking down existing unsv boarding etc complete all as specified and as directed

M&L Pre-cast Cement concrete Type 1:3:6 using (20 mm graded stone aggregates) with solid blocks, exc 10 cm in width and setting in CM 1:6 incl demolition of brick Work / Stone Masonry/PCC block masonry built in cement mortar of any description all as specified and directed.

M&L for rendering for ceiling 5 mm thick in CM 1:3 on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete / Stone masonry surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:4) on other than fair faces of brick work or concrete/stone masonry surface finsihed even and smooth (without using extra cement) mixed with water proofing compound etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

Supply only liquid water proofing compound

M&L for rendering 10 mm thick in CM (1:4) on fiar fair faces of brick work or concrete/stone masonry surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed

M&L Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed

S&F Box type Steel Windows/Ventilators double side shutters (Windows side hung type, Ventilators top hung) pressed steel frames made out CRC Sheet of 80x60x1.25mm double rebated, Shutters box type made out of CRC Sheet of 40x20x1.0mm, windows & ventilator shutter fixed made of glass and gauge fixed with box type hinges, Aluminium die cast handles for glass shutters, Iron flat type handles for mesh shutters, Telescopic stays, etc complete all as specified incl 12mm square guard bars/grill welded with steel frame (100mmc/c horizontically) all as specified and directed by Engineer-in-Charge. NOTE: (i) Payment under this item will be made combined for steel frames, steel shutters and Guard bar/Grill, However unit rate quoted shall deemed to include cost of beading, fittings such as handles, hinges,Telescopic stays, locking arrangements and fixing of glass and wiremesh etc. (ii) 4 mm thick sheet glass and 0.36 mm dia stainless steel wire mesh be measured and paid separately. (iii) Weight of Grill/Guard Bars, handle,hinges and locking arrangements shall not be accounted for payment purpose . (Note : All Windows/Vent design as per CECZ TD drg No 539)

S&F 35mm thick factory made flush door shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing etc complete all as specified and as directed

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed.

S&F Powder Coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed

S&F Powder Coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed/Sliding type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified etc. complete shall as specified and as directed Note - Wire Cloth & Glass shall be measured and paid separately under respective items.

S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complee all as specified and as directed

S&F 200mm long aluminium anodised tower bolt of extruded section etc complete all as specified and as directed

S&F 100 mm thick stainless steel butt hinges, medium weight, and fixed etc complete all as specified and as directed

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S&F 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and as directed

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed '

S&F 4mm thick sheet Glass, Ordinary qulatity and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed

M&L for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded stone aggregate) as in sub base of flooing etc complete all as specified and as directed

M&L for 25 mm thick Cement concrete type B-0,1:2:4 (12.5mm graded stone aggregate) as in levelling course of flooing etc complete all as specified and as directed

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not Exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

All as per item No 41 above but as in skirting /dado incl backing coat 10 mm thick in CM 1:3 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L Glazed ceramic coloured tiles 300X450X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match incl backing coat 10 mm thick in CM 1:3 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L for vitrified tiles heavy duty Hard stone coloured tiles of size 600mmX600mmX15 to 16 mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed.

All as per item No 44 above but as in skirting /dado incl backing coat 10 mm thick in CM 1:3 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L for 18-20mm thick granite Granite stone slab (Z Black / Lakha red or any other colour pattern as approved by GE) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including grinding the edges half round and polishing incl 15 mm thick screed bed in CM 1:6 incl demolition of stone slab (Laid bedded and pointed in any cement) etc complete all as specified and as directed

S&F for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles over and including Screed bed or bedding layer of mortar 15mm thick in CM 1:6 incl demolition of stone slab (Laid bedded and pointed in any mortar) etc complete all as specified and as directed complete all as specified and directed.

M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment including 50 mm thick M Sand cushioning including demolition of stone slab (Laid bedded and pointed in any mortar) etc complete all as specified and as directed

S & F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking down existing GI/CPVC pipe line etc complete all as specified.

S & F 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking down existing GI/CPVC pipe line etc complete all as specified.

S&F in repairs rotational moulded polythene water storage tank triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed

S & F in repairs 25 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

S&F in repairs EWC (Ivory) with normal closing seat cover of size 540X375X415mm with S Trap incl connection to out going pipe, & seat cover and flushing pipe complete all as specified and as directed. (Make Cat no 4018 of Prayag of equivalent make of PS)

S&F in repairs white vitreous china one piece wash basin of size 560X410X180mm excluding taps but including 32 mm dia chromium plated fitting, PVC waste pipe 610 mm long and PVC connection 450 mm long complete all as specified and as directed

S&F in repairs PVC deo flushing cisrern valveless with flushing out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc incl PVC connection 450 mm long complete all as specified and as directed (Make Cat no BA-502 of Prayag of equlavent make of PS)

S&F in repairs bib cock with flange fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed (Make Cat no 9206 of Prayag of equivalent make of PS)

S & F Bib Cock 2 way double handle with CP flange as fixed in repair all as specified and as directed. (Cat No-6812 Marcus series of Prayag or equivalent make as specified in CA)

S & F in repairs 15 mm pillar cock, chromium plated cast copper alloy fancy type complete all as specified and as directed.(Cat No 6802 Marcus series of Prayag or equivalent make as specified in CA)

S&F in repairs angle cock with flange fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch fixed for 15 mm dia bore pipe complete all as specified and as directed (Make Cat no 9210 of Prayag of equlavent make of PS)

S&F in repairs soap dish holder with glass etc complete all as specified and as directed (Make Cat no BA-25G of Prayag of equlavent make of PS)

S&F in repairs Glass Shelf 500 X125 mm with brass bracket etc complete all as specified and as directed (Make Cat no BEA-45 of Prayag of equlavent make of PS)

S&F in repair full corner Glass Shelf (with brass brackets) etc complete all as specified and as directed (Make Cat no BEA-52 of Prayag of equlavent make of PS)

S&F in repairs SS Grab bar Towel rail 450 mm long incl fixing arrangement etc complete all as specified and as directed (Make Cat no GM-04 of Prayag of equlavent make of PS)

S&F in repairs stainless steel towel ring incl fixing arrangement etc complete all as specified and as directed (Make Cat no BA-41 of Prayag of equlavent make of PS)

S&F in repairs Hand shower (Health faucet) (ABS Body) with 8 mm dia, 1.20 mtr long flexible tube & wall hook etc complete all as specified and as directed Make: Prayag or equlavent make of PS

S&F in repairs 75 mm dia bore PVC (SWR) multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed

S&F 110 mm PVC, SWR pipes type 'B', single socketed in any length with rubber ring joint laid in floor /walls etc incl dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F 75 mm PVC, SWR pipes type 'B', single socketed in any length with rubber ring joint in floor /walls etc incl dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F PVC bends (any radius) of 110mm dia with access door etc complete all as specified and as directed

S&F PVC bends (any radius) of 75mm dia with access door etc complete all as specified and as directed

S&F PVC vent cowls of 110mm dia etc complete all as specified and as directed

Complete removal exising treatment of wall by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface incl rubbing and washing etc complete all as specified and as directed

M&L for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed

M&L preparing of new plastered suface of walls and applying two coats of distemper oil emulsion ove a coat of primer etc complete all as specified and as directed

M&L for Preparing Old plastered suface of walls and applying two coats acrylic distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed

M&L preparing newely plastered surface of wall and applying two coat of cement base paint over a coat of alkali resistance primer etc complete all as specified and as directed

M&L preparing Old plastered surface of wall and applying two coat of cement base paint over a coat of alkali resistance primer etc complete all as specified and as directed

M&L for preparing new plastered surface of ceiling and applying Three coat of white wash etc complete all as specified and as directed

M&L for Preparation of new or previously un-treated steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth in hard / dense soil etc complete all as specified and directed

M&L for plain cement concrete 1:4:8 type D-2, with using 40 mm grades stone aggregate as in foundations and mass concrete etc complete all as specified and as directed

M&L for Cement Concrete Type B-0, 1:2:4 (using 12.50 mm graded stone aggregate) as in surface channels and drains etc complete all as specified and directed.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

S&F in repairs 18mm thick block boards, grade 1 quality, exterior grade, commerical type, water proof, termite proof, fixed with screws to timber frame-work as in modular kitchen / cub board shutter over 0.90 mm thick decorative laminate type 1 (Both sides of block board), of surface finish, colour and pattern as approved, fixed with approved adhesive as per marker's instructions etc complete all as specified and as directed.

S&F in repairs stainless steel kitchen basket in various type of baskets susch as plaint basket height 4", Thali basket 8" height, Cup saucer basket 4" heigt, and perforated cutlury basket 4" height all as specified and directed.

S&F in repairs Stainless steel channel for basket sizes 600mm long and 46mm wide all as specified and directed

S&F in repiars Stainless steel auto closing concealed hinges 9.5 cranks for half overlay doors with opening angle 95* (14-32mm) with integrated overlay adjustment + 2.50mm & depth adjustment 4mm complete all as specified.

S&F in repairs 125 mm size powder coated Stainless steel handle fit to modular section etc complete all as specified and as directed

Returning, filing in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm etc complete all as specified and directed

Removal of excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of exc 1.0 Km but not exc 1.50Km, beyond the lead included in the rates, including loading, unloading and stacking at the destination etc complete all as specified and as directed

Sangam Construction (BID ID -3127201)

S S CONSTRUCTIONS (BID ID -3126827)