Providing Galvanium sheet at North Coimbatore High School at Ponnay Street in Ward No 68 Central Zone.

Amount

Dismantling the damaged cement concrete as per the instruction of departmental officers including all initial lead and other labour charges

Scrapping the existing plastered surface in cement mortars per the direction of the departmental officers etc complete

Cement concrete 1:4:8 (one cement, four sand and ei:ht aggregate) using 40mm gauge HBG stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm_ thick and compacted, etc., complete complying with standard specification.

Plain Cement Concrete 1:2:4 (one cement, two fine ageregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per _ standard specification

Supplying and fixing with Galvalume Colour Sheet o size 0.47mm thick including necessary bolt, nuts and bitumen washed etc., completed - 10 m2

Paving the floor with Vitrified Floor Tiles of size 60 X 60cm of approved brand and colour Marbonite tiles in all floors base layer of cement mortar 1:3 (one cement and three sand) 20mm thick using first quality Marbonite tiles of size 60 X 60cm and point with colour cement neatly and fixed in position so as to make perfectly smooth and to alignment etc., complete complying with standard specification

Plastering with cement mortar 1:5 (one cement and five sand)12mm thick in all floors complying with standard specifications.

Providing supply and fixing MS angle of verious size and MS patta with necessary hinges, tower bolt and locking arrangements complete including applying a priming coat of approved steel primer

Painting with emulsion paint two coats along with base coats of approved quality (ISI standard) paint as per the standard specification

Painting with enamel paint two coats of approved quality (ISI standard) paint as per the standard specification.

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl! Chloride) Windows o casement type (open) from the profile the size of outer frame 60mm x 58mm_ and shutter profile are reinforcement with Gi/Imm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and ‘oints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage o water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Wiring with 2 x 4 sq.mm, (56 / 0.3mm) PVC insulated single core unsheathed copper cable conductor cable o 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box for 15SA 3 pin non interlocking CS plug with painting of suitable colour with continuous earth wire connection by 14 SWG TC wire for an. n.c.wer nlug noint.

Supply and run of 2 of 6 sq.mm (84/0.3) PVC insulated SC unsheathed CU. Condutor of 1100V on 7/20 GI bearer wire for service connection mains

Supply and fixing of single box type 4'40W flu fitting complete with copper choke and condensor with TW round blocks on wall of ceiling with flu tube with PVC unsheathed copper leads form terminals

Supply and fixing of 1200mm (48'') sweep AC Ceiling fan complete with stepped electronic 300W regulator with 1 metre down road with fan clamp (18'')

Supply and fixing of WT bulk head fitting with guard (phillips/bajaj/crompton/K.Lite) suitable for 11W CFL lamp with CFL-SD 83

Supply anf run of 2 of 4 SQ.MM (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable heavy gauge M.S. coundit pipe on wall and ceiling with continous earth wire connection of 14 SWG TC wire with painting of suitable colour.

Conveying the excavated earth from the site to the distance of 15kms out side of the city limit including all initial lead, lift, loading and unloading with transporation charges etc complete as per the direction of departmental officers

POOJA ENGINEERING (BID ID -1246947)