Special Repairs of building no P 381 at BnC colony Pashan Pune

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

(a) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

(a) 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

(b) 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) as in plinth protection.

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

(a) 110 mm diameter

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge. Above 40 mm nominal bore

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing toilet paper holder : C.P. brass

Providing and fixing CP liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing CP towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structure like retaining walls of the basement, water tanks roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surface and 3:1 (3 parts integral crystalline slurry : 1 part water) for horizontal surface and appying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI212-3R-2010 i.e by reducing perrmeability of concrete by more than 90% compared with control hydrosatatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm the work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.

a) For vertical surface two coats @ 0.70 kg per sqm

b) For horizontal surface one coat @ 1.10 kg per sqm

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos E.C. 20% with 1% concentration

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping round within 50 metres lead.

15 mm cement plaster on brick or concrete surface in cement mortor : 1:4 (1 cement : 4 fine sand) finished even and smooth without using extra cement.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore

Three track three panels UPVC sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60mm both having wall thickness of 1.9 ± 0.2 mm and double glazing bead of appropriate dimension (Area of window upto 1.75 sqm). Including two numbers 5mm toughned glass and SS wire mesh.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :of area 3 sq. metres and below.

Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). 18 mm thick

Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately)

Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately).

Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge.

38 mm thick wood block flooring of first class teak wood laid over 25 mm thick leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm nominal size) to be paid separately, coated with a thin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 kg per sqm, including fixing blocks in position after dipping in hot bitumen (blown type) up to half depth, planed, levelled smooth and finished complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

(a) 15 mm nominal dia Pipes

(b) 20 mm nominal dia Pipes

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Taking down sub main wiring complete including removing materials for making good disturbed surfaces of wall/ floor/ceiling/roof etc all as specified and as directed

Disconnecting and Taking down carefully unserviceable Metal clad sockets any type/size with MCBs/Isolators etc and making good disturbed surfaces complete all as directed

Supply and wiring for 20A Metal clad Socket outlet with 2 runs of 2.5Sq.mm FRLS insulated multistrand copper conductor wire and 1 run of 1.5sq.mm earth wire drawn through and including heavy duty PVC Casing N Caping on wall/ceiling along with required accessories, supply and fixing of 20A MCB in anodised GI box and front plate complete with fixing accessories including all accessories with junction, bends,elbows ,anodised GI box with covered with front plate,cutting chases in wall and making them good after fixing metal clad socket outlet as per requirement in sheet steel boxes of adequate sizes to accomodate switches,sockets etc as required.(Independent)

Supply and fix LED Square batten fitting with LED tube rod suitable for 1x10 watts including necessary electric connections with flexible copper cable 3 core 1.5sqmm from ceiling rose to LED fitting complete all as specified and directed. Make-Wipro Code no- D571065 equivalent in Philips

Supply and fixing Decorative, wall mounting, brushed nickel finish with opal glass diffuser suitable with 9W LED lamp , B22 base with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suiable size all as specified and directed. Make : Havells cat no- LHFOAJE1TN1I060 or equivalent in Wipro/ Philips/ Crompton

Supply and fixing Decorative, bed side fitting suitable with 3W LED lamp , 360 degree movement with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suiable size all as specified and directed.

Supply and fixing round surface mounted panel LED 12W luminaire, with all fixing arrangement complete all as specified and directed. Wipro Code no- D641240 or equivalent in Philips

Supply and fixing LED street light fitting 30W , pressure die cast aluminium housing LED street light luminaire with IP66 protection complete with all aceessories and fixing arrangement all as specified and directed. Make- Wipro, Code no: D923065 or equivalent in Philips for building security

Supply and fixing Post top LED, IP65 aesthetically appealing vintage LED post top, Make: Wipro, Cat no- LP02-501-xxx-57-xx

Supply and fixingFantasy LED Bollard , IP65 LED Bollard suitable for landscape lighting, Make : Wipro, cat no- CRLA11008HP57-05 and PCC as per site requirement of 1:2, making the foundation to install bollard light fitting in garden all as specified and directed.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable drawn through and including heavy duty PVC Casing N Caping on wall/ceiling along with required accessories.of following sizes

(a) 2 runs of 2.5 Sq.mm wires with 1 run of 1.5 Sq.mm

(b) 2 runs of 4 Sq.mm wires with 1 run of 2.5 Sq.mm

(c) 2 runs of 6sqmm wires with 1 run of 4 Sqmm

Dismentling of ceiling fan / exhaust fan and painting the same with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give even shade including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins, installing the same as required

Taking down the existing geysers and after disconnecting electrically and mechanically and examine & carry out the servicing/overhauling the geyser by thoroughly cleaning the tank, thermostat, heating element and LED lamp indicator, testing in all respect for smooth running and refixing complete all as specified and directed.

Schedule of Credit

B/R ITEMS

Old window with frame and guard bar

Old CP/Brass scrap like bath room fittings etc

Old unserviceable GI/CPVC Pipe of any diameter

Old broken/unserviceable PVC water tank of any capacity

Old unserviceable high/low level flushing cistern

Old unserviceable rain water pipe of any diameter

Old IWC/EWC, Wash basin and urinals

Old CP Brass wall mixer

E/M ITEMS

Old unserviceable submain wiring any size and any capacity

Old unserviceable pandents, batten holders, utility light fitting/gate light, wall brackets any type SK1 to SK11 complete with shades, holders etc

Old unserviceable Metal clad sockets with MCBs of any amps

Mohan Enterprises

Maharashtra Enterprises

Sri SaiMaharaja Electricals