Lot-2 Repair work of Office of Assistant Engineer, Jiledari, Junior Engineer and Store located at Gursarai in Dist. Jhansi

Amount

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by engineer in charge with in a distance of 60 mt.

Dismantling existing plaster i/c disposal as directed by engineer in site with in a distance of 60 m

Dismantling rcc or reinforcement brick work including stacking of materials as directed by engineer in charge with in a distance of 60 mt.

Dismantling cement concret and brick or granolithic floor including base concret and including material within a distance of 50 metres lead.

Excavation in foundation in ordinary soil loam clay and sand incl lift upto 1.5m and lead upto 30m and incl fillling, watering and ramming of excavated earth into the trench or into the space b/w the builing and the side of the foundation trench or into the plinth and removal and disposal of surplus earth as directed by the engineer in charge upto a distance of 30m from the foundation of trench.

Sand Filling in plinth incl supply of necessary quantity of sand from a distance not exceeding 8 km from the site of work and including waterering, dressing etc rate too incld cost of all materials, labour and T&P etc required for proper completion of the work (Rate is Including Royalty

Laying of M-10 (1:3:6)cement concrete with stone ballast with Mechenical mixing & vibration,curing including all cost of material labour T&P etc complete the work. cum

S/ Laying first class brick work in 1:4 cement morter i/c all labour T&P etc complete. /cum (PLINTH & FOUNDATION)

S/ Laying first class brick work in 1:4 cement morter i/c all labour T&P etc complete. /cum (GF)

12 mm cement plaster of mix : 1:4 (1 cement : 4 fine sand)

Finishing walls with water proofing cement paint of approved quality on new surface with two coat to give to an even shade .including supply of all material, labour,and T&P etc

P/A POP Putty of 2mm Thickness over plastered surface to make the surface even and smooth complete T&P

One Prime coat and two distemper coat on new work incl supply of all materials,labour & T&P etc. required for proper completion of work.

Centring and shuttering for R.C.C. work including all cost of material labour T&P complete required for propar completion of work.

Laying of R.C.C. M-20 (1:1.5:3) with all labour, material T&P etc complete the work.

Cutting,bending,binding with binding wire and its placing in position of steel Reinforcement (fe-415) with cost steel labour, Taxes,T&P etc complete required for proper completion of work.

Concrete with 4cms (1.5 inch) gauge brick ballast fine loacal sand of 1.25 FM and cement cement in proportion of 12:6:1 in foundation and under floor aincludings supply of all materials, labour and T&P etc required for proper completion of the work.

Providing and injecting chemical for pre constructional anti termite treatment and creating a chemical barrier under and around the coulumn pits wall tranch basement excavation top surface if plinth junction of wall and floor, along the external per meter of binidng expansion joints surround of pipes and conduct etc. complete (plinth arear of the building of GF shall be measrued as per IS 6313(Part 2013) IMIDACLOPRID SC 30.5 Concetrate or any other aapproved material such as Hepthachlor of Chlordane will used.

Provinding and laying of 8-10mm thick ivory or light shade viritied tiles of 600mmmx 600mm size in flooring or skirting laid with 1:3 cement mortal finishing with cement slurry and with pigment grouting and ploishing complete supply of all materials, labour and T&P etc required for proper completion of work.

S/F galvanished mosquitoes proof heavy quality iron wire guage of expanded metal of heavy quality over windows and inld supply and fixing of Sheesham wood battons 8cm x 1cm and incld supply of necessary screws of all materials and labours and T&P etc required proper completion of work.

C.p teak wood,wrouht framed and fixed i/c simple mouldings straight works as in chukhats ,i/c supplay of all materials ,labour and T&P .etc pwd sor cp no 9 Sr. no. 401

Supply and fixing of 4.5 cm thick c.p teak wood part panneled door and window sutters i/c supplay and fixing of wooden cleats and stops and i/c fixxing and adjustment of hinges ,bolts ,loks and handles ,screw and with 2 coat of black japan on all iron fittings i/c supplay of all materials ,labour and T&P .etc pwd sor cp no 9 Sr. no. 411

Painting or Varnishing on wood works in small area with one coat of ready mix priming paint and one coat of approved superior quality ready mixed paint of clear synthetic varnish incl supply of all materials labour T&P etc required for proper completioon of work paint to be used should confirm to the ISI no. 103:1950

Perforated celing tiles providing and in position teak wood perforated practice board celing tiles bonded with b.w.P. type phonel formaldehyde synthetik resin tiles in size 60X60X12 mm over kail wood timber frame of 50X38mm section and suspended from the roof with the help of flat iron hangers of size 3.0mm X45mm etc on under side leaving and expnasion gap of 6 mm and with provision for providing necessary lighting fixture incl 3 cost of frelt oil paint of approved quality and shade and coat of pink prime/copal varnish of the side facing the roof as per direction giiverrnien engineer in charge

Supplying & Fixing 5mm thick china white glazed tiles in flooring or in skirting dado loil with 1:3 cement morter finished with white cement slurry jointing and polishing i/c all cost of material, labour and T&P etc.complete. As per P.W.D S.O.R Ch.No.14 SI.No.628

Supplying & Laying 80mm thick interlocking C.C.Block laid in stone dust base and fill joint with 2.36 mm stone dust at joint filled with S/D after levelling & dressing base Includining all cost of material, labour and T&P etc.complete. (around IH)

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I.brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls where required :White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with CI brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. Sink without drain board 610X510 mm bowl depth 200mm.

Providing & fixing PVC waste pipe for sink oncluding PVC waste fitting Complete Flexible Pipe 32mm Dia

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing toilet paper holder :C.P. brass

Providing and fixing soil, waste, vent pipes Centrifugally cast (spun) iron S&S pipe 100mm dia cast (spun) iron S&S pipe

Providing and fixing MS holder bat clamps of approved design to cast iron (spun) pipe embedded in and Including cement concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. For 100mm dia. Pipe

Providing and fixing heel rest sanitary bend, in Centrifugally cast (spun) iron pipe S&S 100mm

Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. Sand cast iron S&S as per IS : 3989 100X100X100mm

Providing and fixingPLAIN JUNCTION of required degree 100X100X100mm Sand cast iron S&S as per IS : 3989

Providing and fixing terminal guard: 100mm Sand cast iron S&S as per IS - 3989

Providing and fixing collar.100mm Sand cast iron S&S as per IS - 3989

Providing and lead caulked joint 100 Dia

Providing and fixing cast iron trap of self cleansing design with cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. 100 mm inlet and 100 mm outlet,Sand cast iron S&S as per IS: 3989

Painting sand cast iron / centrifugally cast iron( spun) iron soil, waste and vent pipes and fittings with paint of any colour such as chocolate, grey or buff etc. over a coat of primer (of approval quality) for new work 100mm dia

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms.

Providing & fixing PTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality and colour weighing not less than 88 gms

Providing and fixing PTMT towel rail complete with brackets fixed wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 32mm nominal dia pipes

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter

Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore. 15 mm nominal bore

Providing and fixing PTMT grating of approved quality and colour Circular type 100 mm nominal dia

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter

Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than With F.P.S. Bricks class designation 75 100x100 mm size P type

Wiring point for light with 1.0 sq.mm FR PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe Partly concealed in the wall and partly Laid in slab along with the reinforcement before concreting,complete with 1.5sqmm. FR PVC insulated multistrand single core copper conductor cable as Earth wire , piano type switch & ceiling rose /angle/batten holder on 3mm thick , phenolic laminated backelite sheet etc.complete in all respect as directed including matching colour wash.

Wiring point for fan/fresh air fan (light duty exhaust fan) with 1.0 sq.mm FR PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe Partly concealed in the wall and partly Laid in slab along with the reinforcement before concreting,complete with 1.5sqmm. FR PVC insulated multistrand single core copper conductor cable as Earth wire, piano type switch & ceiling rose /angle/batten holder on 3mm thick , phenolic laminated backelite sheet,etc.complete in all respect,as directed, including matching colour wash.

Wiring point for call bell with 1.0 sq.mm FR PVC insulated multistrand single core copper conductor cable in PVC conduit pipe Partly concealed in the wall and partly Laid in slab along with the reinforcement before concreting ,complete with 1.5sqmm. FR PVC insulated multistrand single core copper conductor cable as Earth wire and piano type bell push switch or two pin socket etc.complete in all respect,as directed, including matching colour wash.

Supply fixing & concealing of PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resine/adhesive to make the complete piping rigid, plastering with cement, sand,mortar finished to the level,with matching colour wash including cost of all material labour and T&P etc. required for proper completion of work as per direction and to the satisfaction of Engineer in charge. Size 20 mm dia (2mm)thick

Supply fixing & concealing of PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resine/adhesive to make the complete piping rigid, plastering with cement, sand,mortar finished to the level,with matching colour wash including cost of all material labour and T&P etc. required for proper completion of work as per direction and to the satisfaction of Engineer in charge. Size 25 mm dia (2mm)thick

Wiring point for plug with 1.0 sq.mm FR PVC insulated multistrand single core copper conductor cable, for plug point with 5 amp flush type switch and 3 pin socket on existing M.S. switch board/junction box with supply of all material,complete with earth continuity wire of 1.5 sq mm PVC insulated multistrand copper conductor cable.

Add for light /fan point with moduler type switch in place of piano type switch.

Add for call bell point with moduler type bell push in place of piano type bell push.

Supply & wiring of submains with 2 nos.1.5 sq.mm FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy gauge rigid steel conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, with 1 no. 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire including maching colour wash etc.complete in all respect.

Supply & wiring of submains with 2 nos.2.5 sq.mm FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy gauge rigid steel conduit partly concealed in wall and partly laid in slabalong with the reinforcement before concreting, with 1 no. 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire including maching colour wash etc.complete in all respect.

Supply & wiring of submains with 2 nos.4 sq.mm FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, with 1 no. 2.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire including maching colour wash etc.complete in all respect.

Supply & wiring of submains with 2 nos.6 sq.mm FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 25 mm dia heavy gauge rigid steel conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, with1 no. 4 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire earth continuity wire including maching colour wash etc.complete in all respect.

Supply & wiring of submains with 4 nos. 6 sq.mm FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 32 mm dia heavy guage rigid steel conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, with 2 no. 4 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire including maching colour wash etc.complete in all respect.

Supply & wiring of submains with 4 nos.10 sq.mm FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 40 mm dia heavy guage rigid steel conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, with 2 no. 6 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire including maching colour wash etc.complete in all respect.

Supply & fixing of Batton/Angle holder including making connection etc. as required.

Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect.

Supply and fixing of factory wired Box type Decorative mirror light fitting with electronic ballast suitable for 1 no.22 watt LED tube lamp with 1x22 w Tube lamp, Complete in all respect.

Supplying and fixing Call Bell / Buzzer single phase, 230 volts, complete as required.

Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc.Following size size 95sq mm x 3-1/2core

Supply and fixing of brass nickle plated compression gland for pvc insulated & armoured served sheaththed ,underground cable including rubber ring etc. complete in all respect. Thearmouring of the cable shall be properly connected with the earth as per direction of engineer -incharge.for cable size 95 sq mm

Supply and fixing of plain or pin type copper tin plated cable socket (lug) to cable leads for pvc insulated & armoured cable insulating with tape and making connection. complete in all respect as per direction of engineer -incharge. for cable size 95 sq mm

Supply and burying of Safe Earthing Electrod T-19 Zn-Zinc Coated,Length 3000mm,outer pipe 48.4mmx3.2mm,inner pipe 26.9mm x 2.6 mm,terminal Dia 12mm,coating 80-100 micron filled with crystalline conductive mixture (CCm) having anti corrosive & conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing.(From electrode terminal to switch board,cost of 25x3 G.I. Strip will be extra) Make : As approved in U.P.P.W.D. & C.P.R.I. Certified.

Supply and laying of 25mm x 3 mm G.I. strip from earth electrode directly in the ground as required complete in all respects.

Supply and fixing of two number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of work as directed at site.

Supply and fixing of 100 mm dia G.I. pipe laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of work as directed at side.

Supply and fixing of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve in existing MCB, DB complete with connections as required.(Legrand Lexic) (CAT A)

Supply and fixing of 240 volts 'C' series 6-32 amp TP miniature circuit breaker (10 K A ) in existing MCB, DB complete with connections as required. (Legrand Lexic) (CAT A)

Supply and fixing of 240 volts 'C' series 40-63amp TP miniature circuit breaker (10 K A ) in existing MCB, DB complete with connections as required. (Legrand Lexic) (CAT A)

Supply and fixing of flush/surface mounting 4 ways TPN distribution boards (Legrand Lexic) without MCB with additional metal door complete in all respects. As directed by Engineer incharge

Supply and fixing of flush/surface mounting 6ways TPN distribution boards (Legrand Lexic) without MCB with additional metal door complete in all respects. As directed by engineer incharge (CAT A)

Supply & Fixing single pole of MCB blanking plate.(CAT A)

Supply and Fixing of Danger Board fabricated from 10 gauge M.S. Sheet as per I.E. Rules

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supply and Laying of 1800*900*12mm thick chequerd rubber matting of tested quality. complete in all respect. as per I.E. Rules

Supply and fixing of power plug with 20A/250V flush type Moduler switch and 5 Pin 20A/250V flush type universal Moduler socket in suitable Conceled MS Box including supply of all material, labour,T&P etc.required for proper completion of work.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work.

Supply and fixing Bell Push socket outlet on the existing switch box/ cover including connection as required.(on existing moduler plate)

Supply & Fixing of Moduler blanking plate on existing modular plate & switch box.

Supply and fixing following size/module, G.I box alongwith moduler base & cover plate for modular switches in recess etc. as required. One/Two module (75x75mm)

Supply and fixing following size/module, G.I box alongwith moduler base & cover plate for modular switches in recess etc. as required. Four module (125x75mm)

Supply and fixing following size/module, G.I box alongwith moduler base & cover plate for modular switches in recess etc. as required. Six module (200x75mm)

Supply and fixing following size/module, G.I box alongwith moduler base & cover plate for modular switches in recess etc. as required. Eight module (125x125mm)

Supply and fixing following size/module, G.I box alongwith moduler base & cover plate for modular switches in recess etc. as required. Twelve module (200x150mm)

Supply fixing of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.

M/S SHYAM ASSOCIATE