SPECIAL REPAIRS TO CERTAIN PORTION OF BLDG NO P 217 SNCOS MESS AT VSN NAGPUR

Amount

Dismantling of floor, hearth or wall tiling,Granite platform including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed.

Dismantling of ceiling boards (fibre AC bldg etc) or insulation boards /skabs/blankets any thickness incl cover fillets all as specified and directed..

Demolition of Brickwork or stone /boulder masonry built in cement mortar complete all as specified and directed.

Demolition of cement concrete (reinforced) any description and in any position not otherwise specifically provided for all as specified and as directed by EIC

Taking down cement plaster on brick or stone wall,concrete, etc including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Taking down of chowkats with shutters (without taking off shutters from the frame) n.exe 1.5 sqm each all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frame) exe 1.5 sqm but n.exc 4sq.m all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frame) n. exe 1 sqm all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections complete all as specified and as directed.

Taking up or down steel tubing 20 mm bore and connections complete all as specified and as directed.

M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of cement mortar(1:6) 15 mm thick for laying floor finishes complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350x450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including rendering 10 mm thick CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado complete all as specified and as directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors (joint free )etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of cement mortar(1:6) 15 mm thick for laying floor finishes complete all as specified and as directed.

Material and labour for 18 mm to 20mm thick granite (of any type)over and including screed bed 15 MM,CM (1:4} work table and polished in steps jamps pillars window cills cooking platforms and like in cement motar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for rounding to edges of Granite stone slabs on edge, such as in steps, cooking platform, and other similar situations including polishing complete all as specified and directed.

M&L for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for wall cladding coloured tiles in vertical surface 350x450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including rendering 10 mm thick CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado complete all as specified and as directed.

M&L for Brickwork with sub class 'B' Bricks , straight or curved in plan exc 6 m mean radius built in CM(1:4) complete all as specified and directed.

M&L for Brickwork with sub class 'B' Bricks ,straight or curved in plan to any radius in half brick thick wall in CM(1:6) complete all as specified and as directed

M&L for type B O 1:2:4 (12.5mm graded aggregate) R C C for chajjas all as specified and directed.

M&L for formwork to chullah hoods, chajjas,troughs and similar items in cluding edges all as specified and directed.

M&L for Formwork to edges of concrete slabs n.exc 20 cm wide with rough finished flat surface of concrete complete all as specified and directed.

S&F PVC(SWR) pipes 110mm bore single socketed in any length withrubber ring joints fixed to walls all as specified and directed by Engr-in-Charge.

S&F PVC(SWR) bend 110mm bore any radius all as specified and directed by Engr-in-Charge.

M&L mild steel TMT bars 8 to 10 mm dia cut to length bent to shape required including cranking , bending and binding with MS wire (annealed) not less than 0.9 mm dia all as specified and as directed by engineer-in-charge

S&F steel windows or ventilators, fixed type or side/cetre hung type with glazing bars including taking down old one all as specified and as directed.

M&L for Rendering 15mm thick on other than fair finish of bricks/concrete/stone surface of wall in CM (1:6) and finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 10mm thick in CM (1:4) in brick surfaces mixed with WPC and finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 5 mm thick on Ceiling in CM (1:3) finished the surface even and smooth without using extra cement. complete all as specified and directed.

M&L for integral water proofing compound ISI Marked complete all as specified and directed.

S&F GI Tubes, ‘medium grade’, galvanised, Concealed with all fitting 15mm including cutting of Stone , Concrete Block or Slab walls and making good complete as specified and directed

S&F GI Tubes, ‘medium grade’, galvanised, Concealed with all fitting 20 mm including cutting of Stone , Concrete Block or Slab walls and making good complete as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI bassed corrugated steel sheet 0.50 mm thick of an colour having tensile strenth of 550Map as in roof covering/cladding to wall,fixed with self tapping screw all as specified and directed.

Cutting chases for roof sheet fixing to walls and making good with fill the pcc in groove cuts after fixing the sheet, cutting not exc 10 cm girth all as specified and as directed.(Note- pcc shall be measured and paid separately)

S&F pressed steel frames for chowkat of size 105x60mm with hinges ,100mm size (3 Nos each chokhat) with one or more rebates including necessary fixing lugs, lock strike plate, etc all as specified and as directed.

M&L for PCC (1:3:6) type C-1 for PS Frame filling all as specified and as directed.

M&L for Applying One coat of Synthetic Enamel paint on steel surface over 10 cm girth including preparation of old painted surface complete all as specified and directed.

S&F 30mm thick flush door shutter solid core construction with block board case and plywood face panels, commercial type on both sides all as approved by GE all as specified and directed.

S & F 2nd class hardwood glazed and skeleton shutters 30 mm thick open rebated and prepared to receive glass, gauge etc with sash bar divided into Squre edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass or gauze etc all as specified and as directed

S&F Stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows, or Stainless steel wire staples all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel tube & fixed in position as per manufacturer's instruction & fixing to wall with ancor bolt or screw with nemani wall plug (size 12 to15 cm long ) all as specified, as shown on drawing on page No 178 of SSR Part-II 2020 including taking down the old PVC door frame as specified & as directed.

S&F 30mm thick (styles) factory made solid panel PVC door shutters consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site all as shown on drawing on page 174 of SSR Part-II 2020 including taking down the old PVC door shutters as specified & as directed.

S&F 100 mm long stainless steel butt hinges all as specified and as directed.

S&F 300 mm long, mild steel ordinary rat rail springs including roller and roller plate complete and facing down old one all as specified and as directed.

S&F Extruded Aluminium bow handles of size100 mm complete all as specified and directed

S&F sheet glass ordinary quality 3mm thick quality with oil putty or beads fixed with screws in sequence not exceeding 0.5 sqm in each pane all as specified and as directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm size complete all as specified and directed

S&F sheet glass ordinary quality obscured or frosted on one side 3mm thick quality with oil putty or beads fixed with screws in sequence not exceeding 0.5 sqm in each pane all as specified and as directed.

S&F Aluminium alloy, anodised,sliding door bolt 300 mm with hasp,staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts andsliding bolts of extrudedsections or cast-aluminium alloy and fixed complete all as specified and directed

M&L for Providing 12.5mm tapered edge Gypboard (conforming to IS-2095-1982) manufactured by M/s India Gypsum false ceiling using GI perimeter channel of size 20mm (one flange) x 27mm (web) x 30mm (other flange) x 0.55mm thick along perimeter of ceiling fixed in wall using nylon sleeves and screws suspended from soffit with GI intermediate channels (of size 15mmx45mmx15mmx0.9mm thick) @ 1220mm centre to centre with ceiling angle (of size 25mmx10mmx0.55mm thick) fixed to soffit with GI cleat and steel expansion fasteners which alternate fixed to ceiling section of 0.55mm thick having Knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm) using connecting clip and in direction perpendicular to intermediate channel @ 300 mm centre to centre and Gypboard fixed to ceiling section using 25mm drywall screws @ 230mm centre to centre complete all as per manufacturer’s instructions and as directed.Including 2 coats of OBD over a coat of 1mm thick putty and taking down of old false ceiling complete all as specified and directed by Engr-in-Charge.

S&F Aluminium Framed doors with shutters glazed including necessary joining cleats, glazing clips, ruber neoprene packing, anodised aluminum snap beading screws etc. 5 mm thick tinted glass using powder coated aluminium sections of approved make confirming to IS.(Glazing and pre laminated particle board shall be measured and paid seperately) complete all as specified and directed by Engr-in-Charge.

S&F Aluminium Louvered type ventilator weighing 0.55 kg/mtr with 4 mm thick frosted glass with all fittings closing and opening type aluminium sections of approved make confirming to IS.(Glazing shall be measured and paid seperately) complete all as specified and directed by Engr-in-Charge..

S&F Aluminium Framed windows with sliding shutters glazed including necessary joining cleats,in each shutters and glazing clips, ruber neoprene packing, anodised aluminum snap beading screws etc. 5 mm thick tinted glass using powder coated aluminium sections of approved make confirming to IS.(Glazing and pre laminated particle board shall be measured and paid seperately) complete all as specified and directed by Engr-in-Charge.

M&L for Prelaminated particle board 12 mm thick, exterior grade, prelaminated both sides with decorative choice laminations as per site requirement fixed with Aluminium frame work as in door/fixed frame work all as specified and directed by Engr-in-Charge.

S&F Door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one all as specified and directed by Engr-in-Charge.

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty all as specified and directed by Engr-in-Charge.

S&F 2 levers Brass Mortice lock for Aluminium Door, size 100 mm all as specified and directed.

S&F 18/19 mm Prelaminated particle board, interior grade,prelaminated both sides with decorative choice lamination for Cupboard door,side/middle/top/bottom/shelf of cuboard complete all as specified and directed by Engr-in-Charge.

S&F for second class hard-wood plain fillets of sectional area exc 13 & n exc 25 sqcm, square, rectangular or triangular in section, clean sawn, secured in brick wall/Rcc with suitable nails/screws/nut & bolt complete all as specified and directed by Engr-in-charge.

M&L For teak wood beading 18 to 20mm wide and 4mm thick including polishing for beading of prelaminated particle board complete all as specified and directed by Engr-in-charge.

S&F 75 mm size MS butt hinges medium weight cold rolled fixed/ welded to frame complete all as specified and directed by Engr-in-charge.

S&F continious(Piano) hinges,Aluminium ,bright finish or electrogalanised,width of flap 30mm when opencomplete all as specified and directed by Engr-in-charge.

S&F 125 mm size Aluminium handles, cast type, polished bright complete all as specified and directed by Engr-in-charge.

S&F Catch Spring magnet type for Cup Board complete all as specified and directed by Engr-in-charge.

S&F Aluminium Knobs 35-40mm diacomplete all as specified and directed by Engr-in-charge.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth and getting out in any type of soil complete all as specified and directed.

M&L for PCC (1:4:8) type D-2(using 40mm graded stone aggregate) as in foundation,filling and mass concrete complete all as specified and directed.

M&L for Reinforced Concrete Cement 1:1.5:3 Type A1Nominal mix (using 20mm graded stone aggregates) as in foundations including rafts, footings, beams, plinth beams, bases for columns etc. basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for Reinforced Concrete Cement 1:1.5:3 Type A1 Nominal mix as in columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for Reinforced Concrete Cement 1:1:5:3 Nominal mix (20mm graded stone aggregate) as in beam,lintel band over 1.50m span complete all as specified and directed.

M&L for Formwork to sides of concrete foundations,footings, bases of columns, plinth beams and similar work with rough finish surfaces of concrete flat complete all as specified and directed.

M&L for Formwork to sides of pillars, posts,struts,piers,columns and stanchions complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beam , lintels , cantilevers , shelves including supports , overhangs etc. also splays between floors and beams etc complete all as specified and directed.

M & L for Preparation of New wooden Surfaces of any description exc 10cm width or girth when unconnectedwith other painting or when painted in different tint complete all as specified and directed

M&L for Preperation of old painted surfaces, one coat of Synthetic Enamel paint over a coat of Red Oxide zinc chrome primer on steel surface over 10 cm girth including preparation of surface complete all as specified and as directed.

M & L for Preparation of Newly plastered wall surfaces by applying two coats of distemper oil emulsion over 3mm thick wall care putty over a coat of cement primer complete all as specified and directed

M & L for Preparation of Newly plastered external wall surfaces by applying two coats of cement base paint over a coat of primer and complete all as specified and directed

M & L for Preparation of Newly plastered ceiling surfaces by applying two coats of distemper oil emulsion over 3mm thick wall care putty over a coat of cement primer complete all as specified and directed

M & L for Preparation of old plastered wall surfaces with complete removal of existing treatment and applying two coats of distemper oil emulsion over 3mm thick wall care putty complete all as specified and directed

M & L for Preparation of old plastered external wall surfaces with complete removal of existing treatment and applying two coats of cement base paint complete all as specified and directed

M & L for Preparation of old plastered ceiling surfaces with complete removal of existing treatment and applying two coats of distemper oil emulsion over 3mm thick wall care putty complete all as specified and directed

Dismantling water tanks 500ltrs to 1000 ltrs complete all as specified and as directed.

S&F in repair Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F in repair Rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

Demolition and breaking up drain pipes,in treches,floors,150mm dia (reinforced concrete drain pipes,Salt glazed stone ware,Spun Pipes,cast iron,PVC,or , AC pipe set in cement mortar and removing from site of work to a distance n.exc 50m all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipes, PVC, 100/110 mm fixed in wall/roof with clamps complete all as specified and directed.

Demolition of PCC of any description and in any position not otherwise specifically provided for as in concrete bed to drain pipe complete all as specified and directed

M&L for Cement concrete bed to drain pipes including packing under,hounching against the side of pipes after they are laid and tested in PCC(1:3:6) type C-2 for 150mm dia pipe complete all as directed.

M&L for Providing precast cement concrete 1:2:4 type B-1 (using 20mm graded stone agg)as in manhole covers set in cement motar 1:6 all as specified and directed including necessary formwork and moulds all as specified.

M&L for 250 mm dia Reinforced concrete pipe class NP-2 laid in trenches and jointed in CM 1;1 with all necessary fittings complete with collars and maintain proper gradient complete all as specified and directed.

S & F 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed.

S & F in repair 75 mm bore PVC (SWR) junction single (single T) equal or unequal all as directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F Vtreous china urinals, bowl type of size 465x355x265mm fixed with automatic flushing cistern, including brackets complete all as specified and directed.

S&F in repairs CP bottle traps 32 mm dia fancy type for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed all as specified and directed by Engr-in-Charge.

M&L for Stainless steel grating,100 mm dia, with waste hole good quality, fixed in repairs, all as specified and directed.

S&F brass chromium plate jet speary with 1.5 meter long easy flex tube in chrome finish and wall hook with NRV (back flow preventer ) make jaquar or equivalent as directed

S&F in repair Bib tap 15mm bore fancy type chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed. Make :Prayag/ Parryware/Haindware

S&F fancy Angle cock 15mm bore fancy type chromium (concealed type) all as specified and as directed.

S&F in repair Stop cock 15mm bore fancy type chromium (concealed type) all as specified and as directed.

S&F in repair Vitreous China wash basin, white, flat back of size 550 x 400 mm including CI brackets, waste coupling ,waste pipe of 32 mm dia low density polythelens (LDPE) pipes of pressure rating 4 Kgf/Sq cm, brass CP pillar tap 15mm screwed down high pressure , PTMT bottle trap, pvc supply pipe 15mm from stop valve etc complete all as specified & as directed Make :Prayag/ Parryware/Haindware

S&F PVC, 32 mm dia,polythelene of low density of pressure raing 4 kgf/cm2 fixed completely to wall/floor for wash hand basin including taking down old one all as specified and as directed.

S&F in repair Pillar tap brass CP fency type 15mm with capston heads , screwed down high pressure for wash hand basin all as specified and as directed. Make : Prayag / Jaquar

S&F Toilet paper holder Brass Chromium plated fixed to wall with chromium plated brass screw including taking down old one all as specified and as directed. Make : Prayag/ Parryware/Haindware

S&F in repair Brass chromium plated Towel Rail D Type 60 cm long between flanges all as specified and as directed. Make : Prayag/ Parryware/Haindware

S&F in repair 10 litres capacity PVC valveless, syphonic action type, slim body fancy flushing cistern, low level, white, with inlet valve, float valve and handle including removal of old one all as specified and as directed.

S&F in repair vitreous china squatting orissa of pattern, long pan, size 580 X 440 mm with 'P' or 'S' trap, front or back inlet and foot rests, any pattern making good to floor all as specified and as directed.

S&F in repair vitreous china wash down water closet, pedastal pattern (EWC) white with 'P' or 'S' trap, fixing bolts and PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete making good to floor all as specified and as directed.

S&F Glass Self 22" with Brass Chromium plated railling of Make Jaquar or equivalent in Make Jhonson / Parryware/Prayag all as specified and as directed.

Taking down carefully existing bitumen tar felt including plaster and roughening the surface ,wire brushing, cleaning and washing with water etc, and removing the rubbish to a distance exceeding 500m but n.exc 1Km and depositing where directed complete all as specified and as directed.

All as per item no. 115.00 above but on vertical surfaces like parapet except brick coba/tilling etc complete all as specified and as directed.

M & L for roof treatment on RCC roof slab complete as mentioned below, all as specified and as directed:- (i) Cleaning the concrete surfaces of RCC roof slab as obtained after demolition/taking down of existing water proofing treatment thoroughly with wire brushes, washed and dried. (ii) Checking the roof slab by flooding test with water till total elimination of leakage/seepage/ dampness all as specified in SSR Part-I (after ascertaining location of leakage/seepage/ dampness, carrying out treatment vide relevant item of pressure grouting shall be operated at the required locations). (iii) Brushing surface with neat cement slurry at the rate of 3.00kg of cement per Sqm. (iv) Cleaning the plastered roof surfaces and applying a coat of bitumen primer @ 0.3 kg/sqm on top of dry surface. (v) Laying APP modified polymeric membrane 3mm thick with non woven polyester core laid and bonded to the sub-strata and over-laps shall be sealed/fused by flame "torch', application method all as per manufacturer's instructions.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed

M & L PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in filleting and benching slightly rounded off etc. Including necessary form work, if any, complete all as specified and as directed.

M & L for rendering over roof slab 10 mm thick in CM 1:3 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement and finished surfaces fair and even complete all as specified and as directed. (WPC shall be measured and paid separately)

S&F Plastic water closet seat cover, black/white, closed pattern with flat bottom, and cover and mild steel chromoium plated or aluminised hinging devices complete all as specified and as directed.

S&F Floor door stopper of aluminium alloy body double and tongue annodised with rubber shoe and fixed of size 150 mm all as specified and as directed.

Supply & fix for 12 mm thick toughened glass door/ patition of approved colour, design & logo (if required any type) side opening type or sliding type with complete fittings of make DORMA or equivalent as approved including pivot hing/floor spring , handle fancy type (for VIP office doors), locking divice with duplicate kye, Spenders partition fixing rods/clits & other fittings if riquired etc & connecting jobs like tile cutting, demolition pcc, plastring & painting etc not exc. 1.50 Sqm to make site good all as specified and directed.(Note- All the fittings will be approve by GE/Engr-in-charge before work started at site) complete all as specified and directed.

Providing & fixing factory made ,rubber molded,white cement based,pigmented block lacquer coating & curved through drying process mechanically vibrated and compacted pre cast premium paver block in M 30 grade,60 mm thickness of approved size/design from any colour(Colour-Red, Saffron,Dholpur,Olive green,Dove grey,Black,Brown,Yellow and any colour approved by GE) with providing and laying in position over bed of sand or stone dust(25 mm thickness) in line and level etc,complete all as manufacturer instruction and all as directed.

M&L for Pre-cast cement concrete solid blocks as in kerbstones(factory made), exc.10 cm in width, in 1:2:4 type B1 using 20mm graded stone aggregate and setting in cement mortar 1:6 complete as specified and as directed. Make:- Raj tiles and eqivalent

M&L for application of two coat of synthetic enamel paint over a coat of primer on with preparing new plastered /concrete surfaces as in kerb stone of foot path with different tints in alternate strips matching to existing etc after necessary preparation all as specified and as directed

Demolition of PCC in ground floors and pavings n exc 15 cm thickness (below or above ground level)all as specified and directed.

M&L PCC, (1:2:4) Type B-1(20mm graded stone aggregate) 25 mm thick as in floor all as specified and directed.

M&L for Kota stone flooring 18-20mm thick over and including 20mm screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing all as specified and directed.

All as per item No 129.00 herein above but as in skirting on verticle surfaces of wall over screed bed 10mm thick in CM (1:4) for kota stone all as specified and directed.

M&L Rubbing/Grinding and mirror polishing the existing kota stone flooring including filling /pointing the joint with cement slurry mixed with pigment to match the surface complete all as specified and directed.

M&L 20mm thick Makrana white marble tiles machine cut in skirting/dado/bordering laid over and including screed bed 15 mm thick and jointed with grey cement slurry including cutting and polishing all as specified and directed.

Supply only integral water proofing compound ISI Marked complete all as specified and directed.

M&L for preparing old plastered surfaces of walls and applying two coats of weather coat paint in different colours as per site requirement all as specified and as directed.

S&F Hindware or Equvalent 90 cm,1200 metre Cube /Hour auto clean Kitchen Chimney for 3 to 5 burners absorb smoke fumes from kitchen and makes kitchen clean and oil smoke free as per site requirement all as specified and as directed by EIC.

Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified.

Taking down carefully sub-main wiring of any description and making good to ther disturbed surfaces to match the existing all as specified and as directed by EIC.

M & L for sub main wiring (concealed) complete with four single core 6 Sqmm FR PVC insulated unsheathed stranded copper conductor cable drawn through in and including 25 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 6 Sqmm FR PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed.. Make of cable : Polycab, Finolex,Havells Note: 5 run of 6 sqmm&one run of PVC conduit shall be measured as single unit

M & L for sub main wiring (concealed) complete with two single core 6 Sqmm FR PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 6 Sqmm FR PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed.. Make of cable : Polycab, Finolex,Havells Note: 3 run of 6 sqmm&one run of PVC conduit shall be measured as single unit

M & L for sub main wiring (concealed) complete with two single core 4 Sqmm FR PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 4 Sqmm FR PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Make of cable : Polycab, Finolex,Havells Note: 3 run of 4 sqmm&one run of PVC conduit shall be measured as single unit

All as per serial item No 141.00 here-in-after but 20 mm dia rigid non-metallic PVC conduit heavy grade with two runs of 2.5 Sqmm and earth continiuty conductor of size 2.5 Sqmm all as specefied and directed.Make of cable : Polycab, Finolex,Havells Note : 3 run of 2.5 sqmm&one run of PVC conduit shall be measured as single unit

Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor, etc. complete all as specified and as directed.

M & L for point wiring (concealed) on walls and surface on ceiling complete with FR PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable modular boxes ,switch plates of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed. (a) One light point controlled by one switch

(b) One fan point controlled by one switch

(c) One exhaust fan point controlled by one switch.

(d) One bell/ buzzer point controlled by one push switch.

(e) One switch socket outlet modular type 3 pin 6 amp on same board.

(f) One light point controlled by two, two way switches,

All as per item No 144.00 above but 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on Independent board.

All as per item No 144.00 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board.

M & L for point wiring (surface) complete with FR PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in PVC Caping/Casing of size 20x12 to 25x16, ISI marked, 19/20 mm dia including all accessories and making good the disturbed surface, with and including suitable modular boxes surface type of make legrand ,switch plates of make Legrand and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed by Engr-in-charge. Make of cable : Polycab, Finolex ,Havells (a) One light point controlled by one switch.

(b) One ceiling/exhaust fan point controlled by one switch.

(c) One 3 pin socket outlet 6 amps on independent board.

M & L for point wiring (surface) complete with FR PVC insulated unsheathed 1100 volts grade, conforming to IS-694, 2.5 Sq mm (nominal area) multi stranded copper conductor cable drawn through PVC conduit casing and caping (size of casing and caping as required in ground) including all accessories, fixing in walls/floors/ceilings with 2.5 Sq mm coppr earth continuity wire connected to earth dolly complete for one 16A Socket on Independent board.

M & L for point wiring (surface) complete with FR PVC insulated unsheathed 1100 volts grade, conforming to IS-694, 4 Sq mm (nominal area) multi stranded copper conductor cable drawn through PVC conduit casing and caping (size of casing and caping as required in ground) including all accessories, fixing in walls/floors/ceilings with 4 Sq mm coppr earth continuity wire connected to earth dolly complete for one 16A Socket on Independent board.

Note for Item No. 144.00 to 156.00 :- The disturbed surfaces of wall for concealing box/wiring shall be make good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. The rate for point wiring shall be deemed to include the cost of making good.

S & F LED security light fitting 25 Wmade out of pressure die cast aluminium powder coated housing high impact resistant 4 mm thick toughened glass cover and matrix of power LEDs in built electronic driver up to 4 KV surge protection fitted with adjustable pole adopter to enable on site tilt angle setting and input power 25 W system lumens 85/W operating voltage 160-260 V of make : CG Cat Part No. LSTS-25-CDL :- Note :(i) Rates are deemed to be included for security ligh brackets made out of 25 mm / 20 mm dia GI medium grade tubing of suitable length and bend to shape including fixing MS flat iron clamps, bolts & nuts as per site requirement complete in all respect complete all as specified and as directed.

S & F master led tube 4ft 20 W LED Tube Polycarbonate type having nominal system lumen output of 2100 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 40,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W (including driver). Make : Phillips/CG Cat Part No LT8-20-865-2 /WIPRO

S & F decorative box type fitting with blue coloured end caps pre wired for LED tube energy of 20 Watt . Make : Phillips/CG Cat Part No DMLN1LT8-16/WIPRO

S & F Surface mounting LED Luminaries and 1 x 9 Watt LED fitting with connecting up with copper 3 core flexible cord of minimum size 1.5 Sqmm size complete all as specified and as directed . Make : CG Cat Part No LCTL-9-CDL, Phillips, Wipro

Taking out the existing any type fittings from ceilings and S & F 18 Watt LED round recessed flat panel light pearl model with locking arrangement in ceiling with a nominal system lumen output of 1800 lumens and a minimum system efficacy of 100 lumen/watt. The luminaire shall have rated system lifetime of 50,000 burning hours at L70. Make : CG Cat Prt No. LSCRM-18W-CDL/NW, Luker, Philips, Wipro.

S & F 0-4 step, one module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and as directed. Make : Legrand Cat No. 675531 or equivalent in specified makes

S & F calling bell musical type , AC, single pole one way 230 volts. Make : Legrand, Anchor Roma, Crabtree.

S & F bell push switch, modular type, 6 Amps, 1 module, 250 volts all as specified and as directed . Make : legrand Cat No. 675504 or equivalent in specified makes

S & F switch modular type single pole two way 6 amps 250 volts, all as specified and as directed. Make : Legrand Cat No 675502 or equivalent in specified makes

S & F Switch modular type, single pole one way 6 Amps, 250 volts Ac suitable for modular switch boxes without indicator, all as specified and as directed. Make : Legrand Cat No. 675501 or equivalent in specified makes

S & F socket modular type single pole one way 6 Amps multistandard 250 volts all as specified and as directed. Make : Legrand Cat No. 675550 or equivalent in specified makes

S & F for ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals all as specified and as directed.Make : Leader, Anchor

S & F socket modular type 16 Amps, 3 pin combine, 2 module,240 volts all as specified and as directed. Make : Legrand Cat No. 675555 or equivalent in specified makes

S & F switch modular type 16 Amps,one way with indicator, 1 module,240 volts all as specified and as directed. Make : Legrand Cat No. 675513 or equivalent in specified makes

S & F power unit for upto 2 ton AC and geyser up to 3.5 KW modular type , 4 module,240 volts all as specified and as directed by EIC. Make : Legrand Cat No. 675558 or equivalent in specified makes

S & F sheet metal enclosures for DB's for incorporating MCBs, TPN, 4 way, IP-43 with metal double door, 415 volts, as per IS-8623 including taking down the old unserviceable TPN DB, all as specified and as directed. Make : Legrand Cat No 507670, ABB,Seimens.

S & F MCB TPN, 63 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand Cat No. 408683 ,ABB,Seimens

S & F sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs,IP-43 , 8 way with 200 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed. Make : Legrand Cat No 507611, ABB,Seimens

S & F MCB SPN, 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand Cat No. 408617 ,ABB,Seimens

S & F MCB SP 10-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand or equivalent in ABB,Seimens

M&L for MCB blanking plate.

M & L for Earthing complete with galvanised steel plate electrode, 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below nominal ground level) with top edge of the plate not less than not less than 1.5 metres below nominal ground level connected to earthing lead of 4 mm dia galvanised iron or steel wire all as shown in plate No. 4 of SSR PART 1 of 2009 to the earthing test point all as specified and as directed. Note :- the cost of excavation and earth work PCC pit and RCC cover funnel & watering pipe, wiremesh, charcoal dust and common salt earth lead protection pipe upto 7.5 Rmt shall be deemed included in the unit rate for earthing all as specified and as directed.

Taking down old exhaust fan and depositing it to E/M store and Supply & Fixing New Exhaust fan heavy duty metal body 18" (450 mm) sweep 230 V, 50 Hz, complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, all as specified.Make : Bajaj, CG, almonard

Taking down old geyser and depositing it to E/M store and Supply & Fixing, testing of water heater storage vertical type of capacity 50 Ltrs, 5 Star rating, rated presuure of 8 bar,unique polymer coating tech, special titanium enamelled heating element, special deflector alongwith grouting and fixing with suitable size of nuts and bolts fixing in the wall with PCC 1:2:4 type BI using 20 mm graded stone aggregate and making good the disturb sufrace including electric and water connection complete all as specefied and directed .Make : Racold, Bajaj, Usha, crompton

M/s ABHIMAN HEGDE

Asha Enterprises

M/s Prakash R. Verma

SIBAL AND SIBAL

M/s M.G. Hargunani

M/s Earth Technology and Construction

S D WAGHAMSHI