SPECIAL REPAIRS TO BUILDING NO T-40 AT AFS YELAHANKA BANGALORE

Amount

Dismantling Asbestos cement corrugated/semicorrugated sheets as in roof covering complete.

S&F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified.

Dismantling timber scantlings 40 sq. cm and over in section, in any position in framed work.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade st-240 .

S&F plates plain or chequred channels square cut or notched (ordinary and counter sunk) forming holes with reveted,bolted or welded attachment confirming Fe-410W (Gde-E-250) quality-A.

S&F mild steel screw bolts (machine made) dia 16 to 20mm and length exc 22.5cm but n.exc 30cm with hexagonal or square heads at one end or screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut.

M&L two coats of synthetic enamel painting to steel surfaces over a coat of priming with red oxide zinc chrome over 10cm width or girth including preparation of new surfaces.

Demolition of brick work built in cement mortar including all quoins arches,pillars etc.

Taking down cement plaster on Brick or concrete surfaces including racking out joints hacking for key scrubbing down with water etc complete

M&L for precast cenment concrete type B1 ,1:2:4 (20 mm graded agg) block masonary with solid blocks exc 10cm in width and setting in CM 1:6

M&L for brick work with sub class 'B' (old size) straight of curved on plan to any radius built in half brick wall using CM 1:4 complete all as specified & directed by Engr-in-Charge.

M&L 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls all as specified and directed.

M&L 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on external wall all as specified and directed.

M&L for Preparing the new surfaces of wall and applying two coat of oil bond distemper over a coat of interior wall care putty 3mm thick all as specified and as directed

Preparation of newly plastered surfaces and applying two coats of cement base paint on walls incl priming surfaces with alkali resistant priming paint etc complete all as specified and directed.

M&L for Complete removal of existing surface finish and applying two coat of OBD over a coat of 3mm thick wall care putty all as specified and directed

M&L preparation of surface and applying two coat of White wash on old wall surface all as specified and directed.

M&L Preparing old painted wooden surface and applying one coat of Synthetic enamel Painting to wooden surface all as specified and directed.

M&L Preparing old painted steel surface and applying one coat of Synthetic enamel Painting to steel surface all as specified and directed.

M&L for preparation of the old surfaces of wall complete removal of existing treatment applying two coat of cement base paint ,complete all as specified and as directed.

Dismantling ceiling boards any thickness incl cover fillets complete.

S&F of Armstrong Board 12mm thick in ceiling fixed as per manufacturer’s instructions .

S&F Anodized aluminium snap grid of size 605mmx605mm (Powder coated) frame work for false ceiling, including 4mm dia GI wire for hanging all as specified in SSR and as directed by Eng-in-charge.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid dry and pointed all as specified.

M&L for Granite(of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing all as specified and directed.

Rounding to edges of granite slab all as specified and directed.

Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level).

M&L 75 mm thick cement concrete type C-2,1:3:6(40 mm graded aggregate) for plinth protection .

M &L PCC 1:3: 6 type C1 using 20 mm graded single as in bed block all as specified and directed.

M&L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’thickness of slab 100mm .

Taking up or down 15mm steel tubing and connections all as specified and directed.

All as per item No 32 here-in-before but 20mm bore

S&F 20 mm dia of CPVC pipes SDR 11 fittings on walls and ceiling or laying in floors complete all as specified.

Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or removal to store.

S&F CPVC pipes 25 mm SDR 11 & Plain VPVC SDR 11 fittings on walls, ceiling orf laying including fitting in floors all as specified and as directed by Engr in Charge.

S&F in repair gun metal globe gate valve 20 mm bore.

S&F in repair gun metal globe gate valve 25 mm bore.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed. Make : Cera/ Parryware/Neycer

S&F plastic pedestal pattern seat cover with flat bottom and cover and MS chormium plated hanging type device all as specified and directed. Make : Cera/Parryware/Neycer

S&F in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern including all fittings and including flushing pipe fixed in repair all as specified and as directed.Make : Cera/Parryware/Neycer

S&F in repairs vitreous china wash basin, white or coloured of size 550 x 400 mm with padestal including brackets all as specified and as directed .Make : Cera/Parryware/Neycer

S & F in repair Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” completed all as specified.Make : Cera/Parryware/Neycer

S&F in repair Bib taps chromium plated 15 mm with fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified. Make : Cera/Jaguar/Ess Ess.

S&F in repair 15mm dia,stop valve concealed type chromium plate fancy type with long shank and cup complete all as specified.Make : Cera/Jaguar/Ess Ess.

S&F 15 mm dia two way bib taps (fancy type), cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge. Cera Model F3002152

S&F 15mm dia angle valves, cast copper alloy, CP, screwed down, high pre-ssure, with crutch, screwed both ends for iron pipe or for unions and fixed in repair.

S&F in repair Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm all as specified and directed. Make : Nirali/ diamond/Blue star

S&F in repair sink cock fancy type complete all as specified and (table mounted)with 215 mm swivel spout complete all as specified and as directed. Make - Cera F2003302)

Supply and fixed PVC Cabinet mirror of size 500 x 400mm all as specified and directed. (Make : Prayag or equivalent).

S& F in repair Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore all as specified and directed at site.Make : Cera/Jaguar/Ess Ess.

S & F in repaiers CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange as specified and as directed.Make : Cera/Jaguar/Ess Ess.

Supply and Fixing in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed .

Supply and Fixing of 32/40mm waste pipe for wash hand basin and sink all as specified and as directed

S&Fin repair CP towel rail 20mm dia D TYPE600 mm long fixed with chromium plated brass screws and wooden /plastic cleats fixed in repairs.Make : Cera/Jaguar/Ess Ess

S&F glass shelf of size 12 cm wide x 60cm long for wash hand basin of cera all as specified.

S & Fin repair CP Towel ring of fixed with and including Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.Make : Cera/Jaguar/Ess Ess

S&F in repair stainless steel Soap dish fix to wall all as directed and specified.Make : Cera/Jaguar/Ess Ess

S&F Corner glass shelf large, 300x300mm of cera all as specified and directed.

S&F in repair brass CP Health faucet with 1.20m long flexible pipe and wall hook complete all as specified and directed.Make : Cera/Jaguar/Ess Ess

S&F PVC floor trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S&F PVC(SWR) Pipe s 110mm dia single soketed, in any length with rubber ring joints, laid in trenches or in floors

S & F PVC (SWR) bends 110 mm dia in any radius with access door etc.

PVC (SWR) pipes 75 mm single socketedwith in any length with rubber ring joints, laid in trenches or in floors and walls.

S & F PVC (SWR) bends 75 mm dia in any radius with access door etc.

S & F PVC (SWR) 75mm dia junction (single 'T') equal or unequal with access door etc.

S&F CP grating size 100mm fixed with white cement all as specified.

S&F in repair rotational moulded polyethylene water storage tank 1000 ltr capacity hoisted and fixed in position all as specified in SSR Pt - I including dismantling old tank.

S&F in repair 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass in repair.

S&F in repair PTMT Nipple 25 mm suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) .

S&F in repair PTMT Nipple 20 mm suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms).

S& F for aluminium powder coated drapery rod 32mm dia fixed to brackets completre all as specified and directed..

S& F aluminium powder coated fancy type suitablre brackets fixed at both ends of openings fixed over 1st class hard wood rounded wooden blocks 0f 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws incl necesary drilling & finished with polishing Each opening shall have two fillets at both ends.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L Non skid coloured ceramic tiles 7 to 8 mm thick matt finish(square/ rectangular) area of ech tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screedd bed 15 mm thick in CM 1:6 complete all as directed and specified.

M&L Glazed coloued Ceramic tiles of size 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dado over 10 mm thick rendering in CM 1:4 finished all as specified and directed in toilets ang kitchen.

M&L Non skid coloured Ceramic tiles 7 to 8 mm thick and area of each tiles exceeding0.11sqm but not exceeding 0.18 Sqm as in flooring over 15mm thick screed bed in CM 1:6 all as specified and directed.

Taking down door chowkats or frames with shutters not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description

All as per item No 79 above but exceeding 1.5 sqm but not exceeding 4 sqm

M&L for taking down shuttes of any description exc 1 Sqm and n.exc 2 Sqm, cupboard shutters all as specified and directed.

M&L for taking down shuttes of any description exc 2 sqm each and refixing in the same opening all as specified and directed.

S&F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

Cutting holes in brick/stone walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B 0 ) using 12.5 mm graded aggregate ¸depth of embedded portion of hold fast not exceeding half brick

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam PVC sheet reinforced with M.S. Square tube, suppling & fixing in single side prelam PVC sheet edges will be painted to match with prelam sheet all as specified and directed.

M&L Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including neccessary fitiings etc complete as specified and directed.

S&F powder coated anodised aluminium frame and shutters with all fixing arrangements for doors, windows and ventilators with one or more rebates including joing cleat for fixing etc aluminium section of powder coating not less than 50 micron all as specified and directed.

S&F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified.

S& F flush door 30mm thick membrane doors decorative finish on one side duly finished and polished and other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings of necessary all as directed by Engr - In Charge. (Note; manufacture MAXON,)

S&F 35mm thick 2 nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares,with plain,chamfered or rounded,mitred and rebated sash bars,any numbers.edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 and fitted to chowkats.

S&F for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 all as specified and directed.

S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets , cast or extracted section and fixing bolt and sliding bolts of extracted section.

S&F for aluminium anodised, barrel tower bolt 150mm of extruded section.

S&F for aluminium handle 150mm cast type anodised.

Supply and fix floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate.

S&F Brass 300 mm ordinary rat rail rod pattern springs incl roller and roller plate complete.

S&F in repair Prelaminated particle board,19 mm thick interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work.

S&F Continuous(piano) hinges,brass ,bright finish of electrogalvanised 40 mm width of flap.

Cover fillets of standard 6 mm thick ness hard board, 40mm wide,and fixing with screws.

M&L preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F sheet glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane fixed with aluminium window and ventilator all as directed by Engineer-in-Charge

All as item 102 above but figured glass pin head type.

S&F sheet glass ordinary quality 4mm thick as in doors,window, showcase alum frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprime gasket all as directed by Engineer-in-Charge

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm all as specified and directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165.

Taking down carefully aluminium point wiring (light, fan, socket or power ) complete, including fittings and fixtures such as switches, ceiling roses, light fittings, regulators, sockets etc, removing materials to store, or keeping in safe custody for re-use at site or offering credit,& making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Taking down unserviceble DBs, with MCBs and Main switches.

Taking down ceiling fan,dismantling blades and removing fan and refixing ceiling fan after completion of re-wiring and connecting up including provision of cable from ceiling rose or connector to fan all as directed.

Taking down Exhaust fan, dismantling blades and removing fan and refixing Exhaust fan after completion of re-wiring,and connecting up including provision of cable from ceiling rose or connector to fan all as directed.

M & L Painting of Taking down ceiling and Exhaust fans complete, in site with synthetic enamel paint by spraying including filling caviteis with filler, one coat after cleaning all dust etc.

M&L for point wiring complete with 1.5 sqmm (nominal cross sectional area) single core PVC insulated heavy duty ISI Marked FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through in and including new PVC concealed conduit in existing brick/stone wall for concealing conduit with 1.6 mm thick fabricated MS terminal boxes with 3.0 mm thick plastic laminated sheet cover for fixing switch, socket, regulators etc and provision of PVC Insulated heavy duty ISI marked unsheathed copper conductor,1.5 sqmm for earth continuity conductor and connected to common earth dolly for the following: -

(a) One light point controlled by one switch.

(b) One ceiling fan/Exhaust Fan controlled by one 5 Amps switch

(c) One Bell Point controlled by one Bell Push

(d) One switch socket outlet point 3 pin 5 Amps on Independent board.

(e) One switch socket outlet point 3 pin 5 Amps on same board.

All as per item No. 6 above but wiring with 2.5 sq mm copper cable with 1.5 sq mm for one earth continuty cable for 6 pin 15 Amps socket out controlled by 15 Amps switch.

Supply and fix switch piano 5 Amps flush type one way.

Supply and fix socket outlet 5 pin 5 Amps multi pin flush type.

Supply and fixing of 5 Amps Switch socket combination 5 Pin.

Supply and fix switch socket combination 5/15Amps multipin flush type.

Supply and fix ceiling rose surface bakelite 65x50mm 3 terminals.

Suply and fix Bell Push flush type.

Supply and fix Bell Multi Music type AC 230 V complete.

Supply and fix fan speed regulator, electronic step type, suitable for single phase AC, 240 volts, 50 Hz, 100 watts all as specified and as directed. Make - CONA/RIDER/ANCHOR

Supply and fixing LED Tube light fitting 20 W, 6500K trim Neo LED aluminium linear batten lamp with Decorative ultra slim linear LED lighting fixture with extruded polycarbonate surface mounted high Efficiency PMMA diffuser soft glare free light complete accessories prewired and including provision of three core copper conductor flexible wire of suitable size from ceiling rose to light fitting and 2 Nos PVC round block for fixing tube lights all as specified and directed. Make Wipro Model : LL20-221-XXX-65AL1 or Equivalent in Philips/Ledvance/ Havells/Crompton.

Supply and fixing LED Tube light fitting 10 W, 6500K with Decorative ultra slim linear LED lighting fixture with co extruded polycarbonate body surface mounted high Efficiency PMMA diffuser soft glare free light complete accessories prewired and including provision of three core copper conductor flexible wire of suitable size from ceiling rose to light fitting and 2 Nos PVC round block for fixing tube lights all as specified and directed. Make Wipro Cat No: LL20-111-XXX-65NE3 or Equivalent in Philips/Ledvance/ Havells/Crompton.

Supply and fixing LED 14 Watts 230 V, with Control driver with efficiency 90 %, attractive type sleek LED mirror light 2 feet fitting with high output diffuser prewired inluding all accessories and connecting up with three core copper conductor with suitable size and 2 Nos PVC round block for fixing light fitting complete all as specified and directed. Make CG Cat No : LCL-14-CDL or Equivalent in Bajaj/Philips/Ledvance/Wipro.

Supply and fix 45 watts, 230 V LED fitting for Building security with pressure die cast aluminum housing, with Control driver with efficiency 90 %,with heat resistant glass and IP 65 protection with better optics for uniform distribution,including necessary fixing arrengment of bracket 40 mm dia, clamps,nut&bolts, etc..including dismantling old unsv fittings all as specified and directed by Engr-in-Charge. Make : Wipro Cat Part No. LR-02-501-XXX-57-XX or equivalent make of Philips/Ledvance/Bajaj/Havells.

Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated heavy duty ISI Marked unsheathed cable 1100 volts grade, multistanded with copper conductor drawn through and including 20 mm dia non matallic rigid concealed PVC conduit and conduit accessories and including provision of 4.0 sqmm size PVC insulated heavy duty ISI Marked unsheathed cable 1100 volts grade, multistanded with copper conductor cable as earth continuity conductor and making good the disturbed surface also matching the existing surface all as specified and as directed by Engineer-in-charge. Note:- Three Run of 4 Sq mm single core copper conductor and PVC conduct is measured as one Run or one Meter.

Supply and fix sheet metal enclosures for MCB distribution board 415 Volts Triple pole and neutral 8 way Double door flushed inside the wall with 200 Amps rated busbar including flushing the DBs inside the walls and making good the disturbed surface also matching with the existing surface incl taking down old unsv DBs complete all as specified and directed by Engr in charge.

Supply and fix 'C' curve MCB Triple pole and Neutral , 415 volts, 35 to 63 Amps 10 KA rupturing capacity.

Supply and Fix 'C' curve MCB SP 6 to 32A, 10 KA, rupturing capacity.

Supply and fix single pole and netural encloser with a two pin and earth plug socket complete with one single pole MCB of 20Amps

Supply and fix Exhaust fan (250mm Sweep) with louvers and acessories. Make: Standard Model No. Refresh air-DX or equivalent to Havells/USHA

M & L for provision of hole on the wall for fixing of the exhaust fan and connecting with the ceiling rose complete all as specified and directed by Engr-in-Charge.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10 cm girth all as directed

M&L earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below ground level connected with GI earth wire of 4 mm dia up to a length of 7.5 mtr long by means of GI bolts, nuts, washers etc and protected by GI pipe light grade 15 mm bore and 20 mm dia GI tubing medium grade with funnel for watering, connecting to test point, all as shown in electrical plate No.3 of SSR Part I incl necessary earth work and excavation in any type of soil, PCC(1:3:6) type C1 earth chamber with RCC cover slab 50 mm thick,with RCC (1:2:4) type B1 with 8 mm CTD bars re -inforcement both ways at 140 mm C/C with MS hook, including salt, charcoal and provn of test point complete incl taking out old earthing..

Sri Maruthi Builders

Lakkaiah Rangaswamy

ROHAN BUILDERS

K. VENKATESH NAIDU

G K CONSTRUCTIONS

MATA GUJRI CONSTRUCTION CO.

M/s Sri Chakrapani Constructions

D NAGI REDDY