NIT NO. 279/Durg(Khairagarh)/2026

N.I.T. Schedule for Construction of Storage Room in Government Garden Nursery Birutola Chhuikhadan Distt- Khairagarh-Chhuikhadan-Gandai (C.G.)

Building S.O.R. w.e.f. 01-01-2015 with Amendment uptodate P.A.C. 22.32 LACS

S. No Depart. SOR Year SOR ITEM No Particular's of Item Qty Unit Rate Amount

1 P.W.D. Building 2015 1.2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). 270.00 sqm 7.20 1944.00

2 P.W.D. Building 2015 1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

P.W.D. Building 2015 1.1.1 In all types of soils. 135.26 cum 185.00 25023.29

3 P.W.D. Building 2015 1.6 Extra for every additional lift of 1.5 m or part thereof

P.W.D. Building 2015 1.6.1 All types of soils 33.75 cum 26.50 894.38

4 P.W.D. Building 2015 3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work

P.W.D. Building 2015 3.1.3 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 21.07 cum 2970.00 15289.56

5 P.W.D. Building 2015 1.25 Diluting chemical emulsion (chlorpyrifos/ lindane) in water as per manufacturers recommendation and injecting for pre-constructional curative cum preventive anti-termite treatment:(Five year service guarantee bond to be signed by contractor)

P.W.D. Building 2015 1.25.1 Surface treatment by spreading emulsion under floor, over the plinth area before laying base concrete @ 5 litres / sqm 168.64 sqm 27.50 4637.60

P.W.D. Building 2015 1.25.2 Treatment of inside of plinth masonry wall on using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diameter holes in plinth wall below plinth protection at the interval of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand). 168.64 mtr 19.00 3204.16

6 P.W.D. Building 2015 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 108.19 cum 371.00 40138.49

7 P.W.D. Building 2015 1.17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. 108.19 cum 65.00 7032.35

8 P.W.D. Building 2015 3.2 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work

P.W.D. Building 2015 3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 23.32 cum 4163.00 97089.49

P.W.D. Building 2015 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 41.64 cum 4260.50 177423.20

9 P.W.D. Building 2015 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete:

P.W.D. Building 2015 3.12.2 Thermo-Mechanically treated bars FE 500D 6872.40 kg 54.50 374545.80

10 P.W.D. Building 2015 2.1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

P.W.D. Building 2015 2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape 193.59 sqm 297.00 57496.23

P.W.D. Building 2015 2.1.8 Beams, lintels, cantilevers & walls 135.64 sqm 202.00 27399.28

P.W.D. Building 2015 2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 175.14 sqm 235.00 11938.00

11 P.W.D. Building 2015 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

P.W.D. Building 2015 7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand) 27.43 cum 3263.00 89510.62

12 P.W.D. Building 2015 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in

P.W.D. Building 2015 7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand

P.W.D. Building 2015 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 47.67 cum 3384.00 161315.28

13 P.W.D. Building 2015 9.18 Providing and fixing in position doors, windows and ventilators frames made of cold rolled pressed steel sheet framed profiles made from commercial M.S. Sheets conforming to I.S. 513 of 1973 and as per general specifications of I.S 4351 including hinges jamb, lock jamb, steel butt hinges, base tie, joints mitred and welded with 10cm long legs of size 15x3mm M.S. flat, embedded in cement concrete blocks 15x10x10cm size of grade M-10 or rawl plugs and screws or with fixing clips or with bolts and nuts including neatly compacted filling M-10 cement concrete in

P.W.D. Building 2015 9.18.1 Single rebate/ mullion 80mmx50mm size, 1.25mm thick sheet 31.80 mtr 361.00 11479.80

14 P.W.D. Building 2015 8.3 Providing 40x5mm iron hold fast 40cm long including fixing to frame with 10mm bolts nuts and wooden plug and embedding in Cement Concrete 1:2:4 in blocks of size 30x10x15cm. 18.00 each 72.50 1305.00

15 P.W.D. Building 2015 8.12 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges.

P.W.D. Building 2015 8.12.2 35 mm. thick (single leaf) 10.71 sqm 2005.00 21473.55

16 P.W.D. Building 2015 8.24 Providing and fixing 30mm thick wire gauge shutter having top and style rail 95mm width, bottom and lock rail 197mm width, using galvanized M.S. wire dia of 0.45mm for doors, windows, clerestory windows excluding hinges.

P.W.D. Building 2015 8.24.1 Teak Wood 10.71 sqm 2477.00 26528.67

17 P.W.D. Building 2015 8.77 Providing and fixing antique/ SS finished brass butt hinges with antique/ SS polished MS screw complete:

P.W.D. Building 2015 8.77.1 125x85x5.50mm (Heavy Type) 60.00 each 256.00 15360.00

18 P.W.D. Building 2015 8.79 Providing and fixing antique/ SS finished brass sliding door bolt with necessary bolts, nuts and antique/ SS polished MS screw complete:

19 P.W.D. Building 2015 8.80 Providing and fixing antique/ SS finished brass door latch with antique/ SS polished MS screw complete:

20 P.W.D. Building 2015 8.81 Providing and fixing antique/ SS finished brass tower bolts (Barrel type) with antique/ SS polished MS screw complete:

21 P.W.D. Building 2015 8.84 Providing and fixing antique/ SS finished brass handles with antique/ SS polished MS screw complete

22 P.W.D. Building 2015 8.90 Providing & fixing 150mm antique/ SS finished brass floor door stopper with rubber cushion and antique/ SS polished MS screw complete to suit the shutter thickness 46.00 each 77.00 3542.00

23 P.W.D. Building 2015 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. 247.50 kg 67.50 16706.25

24 P.W.D. Building 2015 9.47 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately

P.W.D. Building 2015 9.47.1 For fixed portion 65.31 kg 331.00 21617.61

25 P.W.D. Building 2015 9.47 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately:

P.W.D. Building 2015 9.47.2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). 116.63 kg 338.00 39419.25

26 P.W.D. Building 2015 9.49 Extra for polyester powder coated (minimum 50 micron) aluminium sections instead of anodized. 910.00 kg 34.50 31395.00

27 P.W.D. Building 2015 9.51 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item):

P.W.D. Building 2015 9.51.2 5 mm thickness 9.00 sqm 708.00 25105.68

28 P.W.D. Building 2015 11.1 Providing and making 6mm thick cement plaster of mix:

P.W.D. Building 2015 11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand 152.42 sqm 87.00 13260.54

29 P.W.D. Building 2015 11.2 Providing and making 12mm thick cement plaster of mix:

P.W.D. Building 2015 11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 331.62 sqm 91.50 30343.23

30 P.W.D. Building 2015 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:

P.W.D. Building 2015 11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 211.20 sqm 107.00 22598.40

31 P.W.D. Building 2015 12.49 25 mm thick KOTA stone slab flooring over 20mm (Average) thick base of cement mortar 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing etc. complete (Area of slab to be over 0.20 sqm and upto 0.50 sqm)

P.W.D. Building 2015 12.49 Size 600x600mm thickness 8 to 9mm 116.33 sqm 897.00 104348.01

32 P.W.D. Building 2015 14.54 Providing and applying plaster of paris putty over plastered wall surface including scaffolding complete

P.W.D. Building 2015 14.54.2 More than 2 mm to 4mm thickness to make surface even and smooth in line and level. 720.74 sqm 103.00 74236.22

33 P.W.D. Building 2015 14.59 Providing and applying Polymaric cement primer on all surface applied @ 0.80 litrs/10 sqm as per relevant IS. code 15489:1974 (product such as Birla white primacoat/activcoat, Asian Trucare , Dulux interior cement primer, Opus Calista / I10) with all tool tackles and labour etc. complete for the work 720.74 sqm 29.00 20901.46

34 P.W.D. Building 2015 14.63 Providing and applying Economy Plastic emulsion paint with roller application minimum three coats appied @ 1.25 lit / 10 Sqm up to final finish as per relevant I.S. Code 15489:2013_Type -1 Class D & C (Glossy and Semi Glossy Finish) of required shade (product such as Tractor emulsion, Dulux Promise, Nerolac Bueaty Silver, Berger bison/breeze , Opus I30/ Style Paint) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour complete for the work . (With 2 Year warranty). 14.40 sqm 74.00 1065.60

35 P.W.D. Building 2015 14.65 Providing and applying Luxury plastic enmulsion paint with roller application minimum three Coats applied @ 1.25 lit / 10Sqm up to final finish as per relevant Type 1 Class D,C,B&A (Glossy /Semi Glossy and Matt , Egg Shell or Satin finish ) of required shade (Product such as Asian Royale Shyne,Dulux Velvet Touch, Berger Silk Luxury Emulsion ,Nippon Impression Pearl, Opus Pure Elegance) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc, complete for the work. (with 4 Years Warranty ) 490.34 sqm 107.00 52466.38

36 P.W.D. Building 2015 14.79 Providing and applying ready to apply POLYURETHANE MODIFIED WOOD FINISH on new wood work in two coats with spray machine after preparing surface by rubbing down smooth with sand papers 180. this should be followed by smooth sanding with sand paper 320 or 400. wipe the surface to clean off loose dust particles for secong coat applied @0.10L/Sqm (product such as Asian Paints TouchWood, Dulux sadoline interior, Berger wood keeper 1KPU ) inclusive of providing abro tape on edges and article and cleaning of adjucent surface with all tools, tackles and labour etc. complete for the work. 50.18 sqm 339.00 17012.38

37 P.W.D. Building 2015 14.71 Providing and applying satin/ matt finish Enamel paint mimimum 2 Coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work 8.97 sqm 133.00 1193.01

38 P.W.D. Building 2015 18.4 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :

P.W.D. Building 2015 18.4.1 White pedestal type 1.00 Each 2882.00 2882.00

39 P.W.D. Building 2015 18.17 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :

P.W.D. Building 2015 18.17.2 White Size 550x400 mm 2.00 Each 1408.00 2816.00

40 P.W.D. Building 2015 18.23 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of brackets, cutting and making good the wall wherever required :

P.W.D. Building 2015 18.23.2 Size 600x450x200mm 1.00 Each 4502.00 4502.00

41 P.W.D. Building 2015 18.13 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete:

P.W.D. Building 2015 18.13.1 Flat back half stall urinal of size 460x380x250mm 3.00 Each 1776.00 5328.00

42 P.W.D. Building 2015 18.16 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe. 1.00 Each 1401.00 1401.00

43 P.W.D. Building 2015 18.76 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592(4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete.

P.W.D. Building 2015 18.76.1 75 mm dia pipe. 40.00 M 182.00 7280.00

P.W.D. Building 2015 18.76.2 110 mm dia pipe. 100.00 M 267.00 26700.00

44 P.W.D. Building 2015 21.2 Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge beyond 90 metre & upto 150 metre depth below ground level.

P.W.D. Building 2015 21.2.2 Rocky strata including Boulders.

45 P.W.D. Building 2015 19.47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : 8.00 each 754.00 6032.00

46 P.W.D. Building 2015 19.52 Constructing masonry Chamber 60x45x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand :10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 7.00 each 4133.00 28931.00

47 P.W.D. Building 2015 19.15 Providing and fixing stainless steel drain jali of approved make/quality. 2.00 each 51.00 102.00

48 P.W.D. Building 2015 21.5 Supplying, assembling, lowering and fixing in vertical position in bore well, ISI marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per IS: 1239 (Part-1&Part-2) 1992 with IVth revision (Up-to-date amendments), of reputed & approved make, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer- in-charge.

P.W.D. Building 2015 21.5.3 150 mm nominal dia 20.00 M 1304.00 26080.00

49 P.W.D. Building 2015 21.11 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of:

P.W.D. Building 2015 21.11.3 150 mm dia 1.00 Each 217.00 217.00

50 P.W.D. Building 2015 19.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

P.W.D. Building 2015 19.5.2 20 mm nominal outer dia .Pipes. 75.00 mtr 167.00 12525.00

P.W.D. Building 2015 19.5.3 25 mm nominal outer dia .Pipes. 100.00 mtr 213.00 21300.00

51 P.W.D. Building 2015 19.14 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required:

P.W.D. Building 2015 19.14.2 Long nose bib cock (500 grams 2 each 455.00 910.00

P.W.D. Building 2015 19.14.17 Towel ring (150 mm dia) 2 each 338.00 676.00

P.W.D. Building 2015 19.14.8 Basin mixer pillar tap with spout (1000 grams) 3 each 1248.00 3744.00

P.W.D. Building 2015 19.14.11 Hand shower set with flexible extension pipe 1 each 754.00 754.00

P.W.D. Building 2015 19.14.14 Soap dish plate 1 each 163.00 163.00

52 P.W.D. Building 2015 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 2000.00 lit 7.30 14600.00

53 P.W.D. Building 2015 4.4 Providing and placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete :

P.W.D. Building 2015 4.4.3 Kickers (320mm wide, 5mm thick). 158.12 sqm 421.00 66568.52

54 P.W.D. Building 2015 19.7 Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete

P.W.D. Building 2015 19.7.4 32 mm dia. nominal bore 60.00 rm 318.00 19080.00

55 P.W.D. Building 2015 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 250.00 sqm 371.00 92750.00

56 P.W.D. Building 2015 12.65 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm

P.W.D. Building 2015 12.65.2 Pigment Coloured (rubber mould) precast interlock concrete blocks 250.00 sqm 632.00 158000.00

TOTAL COST RS. 2232463.00 22.32

Sub Engineer Sub Divisional Officer Executive Engineer

P.W.D.(B&R) Sub Division P.W.D.(B&R) Sub Division P.W.D.(B&R) Division

chhuikhadan chhuikhadan Khairagarh

N.I.T. Schedule for Construction of Storage Room in Government Garden Nursery Birutola Chhuikhadan Distt- Khairagarh-Chhuikhadan-Gandai (C.G.)

Building S.O.R. w.e.f. 01-01-2015 with Amendment uptodate P.A.C. 20.16 LACS

S. No Depart. SOR Year SOR ITEM No Particular's of Item Qty Unit Rate Amount

1 P.W.D. Building 2015 1.2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). 270.00 sqm 7.20 1944.00

2 P.W.D. Building 2015 1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

P.W.D. Building 2015 1.1.1 In all types of soils. 135.26 cum 185.00 25023.29

3 P.W.D. Building 2015 1.6 Extra for every additional lift of 1.5 m or part thereof

P.W.D. Building 2015 1.6.1 All types of soils 33.75 cum 26.50 894.38

4 P.W.D. Building 2015 3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work

P.W.D. Building 2015 3.1.3 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 21.07 cum 2970.00 15289.56

5 P.W.D. Building 2015 1.25 Diluting chemical emulsion (chlorpyrifos/ lindane) in water as per manufacturers recommendation and injecting for pre-constructional curative cum preventive anti-termite treatment:(Five year service guarantee bond to be signed by contractor)

P.W.D. Building 2015 1.25.1 Surface treatment by spreading emulsion under floor, over the plinth area before laying base concrete @ 5 litres / sqm 168.64 sqm 27.50 4637.60

P.W.D. Building 2015 1.25.2 Treatment of inside of plinth masonry wall on using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diameter holes in plinth wall below plinth protection at the interval of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand). 168.64 mtr 19.00 3204.16

6 P.W.D. Building 2015 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 108.19 cum 371.00 40138.49

7 P.W.D. Building 2015 1.17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. 108.19 cum 65.00 7032.35

8 P.W.D. Building 2015 3.2 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work

P.W.D. Building 2015 3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 23.32 cum 4163.00 97089.49

P.W.D. Building 2015 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 41.64 cum 4260.50 177423.20

9 P.W.D. Building 2015 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete:

P.W.D. Building 2015 3.12.2 Thermo-Mechanically treated bars FE 500D 5727.00 kg 54.50 312121.50

10 P.W.D. Building 2015 2.1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

P.W.D. Building 2015 2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape 193.59 sqm 297.00 57496.23

P.W.D. Building 2015 2.1.8 Beams, lintels, cantilevers & walls 135.64 sqm 202.00 27399.28

P.W.D. Building 2015 2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 175.14 sqm 235.00 11938.00

11 P.W.D. Building 2015 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

P.W.D. Building 2015 7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand) 27.43 cum 3263.00 89510.62

12 P.W.D. Building 2015 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in

P.W.D. Building 2015 7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand

P.W.D. Building 2015 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 47.67 cum 3384.00 161315.28

13 P.W.D. Building 2015 9.18 Providing and fixing in position doors, windows and ventilators frames made of cold rolled pressed steel sheet framed profiles made from commercial M.S. Sheets conforming to I.S. 513 of 1973 and as per general specifications of I.S 4351 including hinges jamb, lock jamb, steel butt hinges, base tie, joints mitred and welded with 10cm long legs of size 15x3mm M.S. flat, embedded in cement concrete blocks 15x10x10cm size of grade M-10 or rawl plugs and screws or with fixing clips or with bolts and nuts including neatly compacted filling M-10 cement concrete in

P.W.D. Building 2015 9.18.1 Single rebate/ mullion 80mmx50mm size, 1.25mm thick sheet 31.80 mtr 361.00 11479.80

14 P.W.D. Building 2015 8.3 Providing 40x5mm iron hold fast 40cm long including fixing to frame with 10mm bolts nuts and wooden plug and embedding in Cement Concrete 1:2:4 in blocks of size 30x10x15cm. 18.00 each 72.50 1305.00

15 P.W.D. Building 2015 8.12 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges.

P.W.D. Building 2015 8.12.2 35 mm. thick (single leaf) 10.71 sqm 2005.00 21473.55

16 P.W.D. Building 2015 8.24 Providing and fixing 30mm thick wire gauge shutter having top and style rail 95mm width, bottom and lock rail 197mm width, using galvanized M.S. wire dia of 0.45mm for doors, windows, clerestory windows excluding hinges.

P.W.D. Building 2015 8.24.1 Teak Wood 10.71 sqm 2477.00 26528.67

17 P.W.D. Building 2015 8.77 Providing and fixing antique/ SS finished brass butt hinges with antique/ SS polished MS screw complete:

P.W.D. Building 2015 8.77.1 125x85x5.50mm (Heavy Type) 60.00 each 256.00 15360.00

18 P.W.D. Building 2015 8.79 Providing and fixing antique/ SS finished brass sliding door bolt with necessary bolts, nuts and antique/ SS polished MS screw complete:

19 P.W.D. Building 2015 8.80 Providing and fixing antique/ SS finished brass door latch with antique/ SS polished MS screw complete:

20 P.W.D. Building 2015 8.81 Providing and fixing antique/ SS finished brass tower bolts (Barrel type) with antique/ SS polished MS screw complete:

21 P.W.D. Building 2015 8.84 Providing and fixing antique/ SS finished brass handles with antique/ SS polished MS screw complete

22 P.W.D. Building 2015 8.90 Providing & fixing 150mm antique/ SS finished brass floor door stopper with rubber cushion and antique/ SS polished MS screw complete to suit the shutter thickness 46.00 each 77.00 3542.00

23 P.W.D. Building 2015 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. 247.50 kg 67.50 16706.25

24 P.W.D. Building 2015 9.47 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately

P.W.D. Building 2015 9.47.1 For fixed portion 65.31 kg 331.00 21617.61

25 P.W.D. Building 2015 9.47 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately:

P.W.D. Building 2015 9.47.2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). 116.63 kg 338.00 39419.25

26 P.W.D. Building 2015 9.49 Extra for polyester powder coated (minimum 50 micron) aluminium sections instead of anodized. 910.00 kg 34.50 31395.00

27 P.W.D. Building 2015 9.51 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item):

P.W.D. Building 2015 9.51.2 5 mm thickness 9.00 sqm 708.00 25105.68

28 P.W.D. Building 2015 11.1 Providing and making 6mm thick cement plaster of mix:

P.W.D. Building 2015 11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand 152.42 sqm 87.00 13260.54

29 P.W.D. Building 2015 11.2 Providing and making 12mm thick cement plaster of mix:

P.W.D. Building 2015 11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 331.62 sqm 91.50 30343.23

30 P.W.D. Building 2015 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:

P.W.D. Building 2015 11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 211.20 sqm 107.00 22598.40

31 P.W.D. Building 2015 12.49 25 mm thick KOTA stone slab flooring over 20mm (Average) thick base of cement mortar 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing etc. complete (Area of slab to be over 0.20 sqm and upto 0.50 sqm)

P.W.D. Building 2015 12.49 Size 600x600mm thickness 8 to 9mm 116.33 sqm 897.00 104348.01

32 P.W.D. Building 2015 14.54 Providing and applying plaster of paris putty over plastered wall surface including scaffolding complete

P.W.D. Building 2015 14.54.2 More than 2 mm to 4mm thickness to make surface even and smooth in line and level. 720.74 sqm 103.00 74236.22

33 P.W.D. Building 2015 14.59 Providing and applying Polymaric cement primer on all surface applied @ 0.80 litrs/10 sqm as per relevant IS. code 15489:1974 (product such as Birla white primacoat/activcoat, Asian Trucare , Dulux interior cement primer, Opus Calista / I10) with all tool tackles and labour etc. complete for the work 720.74 sqm 29.00 20901.46

34 P.W.D. Building 2015 14.63 Providing and applying Economy Plastic emulsion paint with roller application minimum three coats appied @ 1.25 lit / 10 Sqm up to final finish as per relevant I.S. Code 15489:2013_Type -1 Class D & C (Glossy and Semi Glossy Finish) of required shade (product such as Tractor emulsion, Dulux Promise, Nerolac Bueaty Silver, Berger bison/breeze , Opus I30/ Style Paint) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour complete for the work . (With 2 Year warranty). 14.40 sqm 74.00 1065.60

35 P.W.D. Building 2015 14.65 Providing and applying Luxury plastic enmulsion paint with roller application minimum three Coats applied @ 1.25 lit / 10Sqm up to final finish as per relevant Type 1 Class D,C,B&A (Glossy /Semi Glossy and Matt , Egg Shell or Satin finish ) of required shade (Product such as Asian Royale Shyne,Dulux Velvet Touch, Berger Silk Luxury Emulsion ,Nippon Impression Pearl, Opus Pure Elegance) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc, complete for the work. (with 4 Years Warranty ) 490.34 sqm 107.00 52466.38

36 P.W.D. Building 2015 14.79 Providing and applying ready to apply POLYURETHANE MODIFIED WOOD FINISH on new wood work in two coats with spray machine after preparing surface by rubbing down smooth with sand papers 180. this should be followed by smooth sanding with sand paper 320 or 400. wipe the surface to clean off loose dust particles for secong coat applied @0.10L/Sqm (product such as Asian Paints TouchWood, Dulux sadoline interior, Berger wood keeper 1KPU ) inclusive of providing abro tape on edges and article and cleaning of adjucent surface with all tools, tackles and labour etc. complete for the work. 50.18 sqm 339.00 17012.38

37 P.W.D. Building 2015 14.71 Providing and applying satin/ matt finish Enamel paint mimimum 2 Coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work 8.97 sqm 133.00 1193.01

38 P.W.D. Building 2015 18.4 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :

P.W.D. Building 2015 18.4.1 White pedestal type 1.00 Each 2882.00 2882.00

39 P.W.D. Building 2015 18.17 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :

P.W.D. Building 2015 18.17.2 White Size 550x400 mm 2.00 Each 1408.00 2816.00

40 P.W.D. Building 2015 18.23 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of brackets, cutting and making good the wall wherever required :

P.W.D. Building 2015 18.23.2 Size 600x450x200mm 1.00 Each 4502.00 4502.00

41 P.W.D. Building 2015 18.13 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete:

P.W.D. Building 2015 18.13.1 Flat back half stall urinal of size 460x380x250mm 3.00 Each 1776.00 5328.00

42 P.W.D. Building 2015 18.16 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe. 1.00 Each 1401.00 1401.00

43 P.W.D. Building 2015 18.76 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592(4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete.

P.W.D. Building 2015 18.76.1 75 mm dia pipe. 40.00 M 182.00 7280.00

P.W.D. Building 2015 18.76.2 110 mm dia pipe. 100.00 M 267.00 26700.00

44 P.W.D. Building 2015 21.2 Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge beyond 90 metre & upto 150 metre depth below ground level.

P.W.D. Building 2015 21.2.2 Rocky strata including Boulders.

45 P.W.D. Building 2015 19.47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : 8.00 each 754.00 6032.00

46 P.W.D. Building 2015 19.52 Constructing masonry Chamber 60x45x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand :10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 7.00 each 4133.00 28931.00

47 P.W.D. Building 2015 19.15 Providing and fixing stainless steel drain jali of approved make/quality. 2.00 each 51.00 102.00

48 P.W.D. Building 2015 21.5 Supplying, assembling, lowering and fixing in vertical position in bore well, ISI marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per IS: 1239 (Part-1&Part-2) 1992 with IVth revision (Up-to-date amendments), of reputed & approved make, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer- in-charge.

P.W.D. Building 2015 21.5.3 150 mm nominal dia 20.00 M 1304.00 26080.00

49 P.W.D. Building 2015 21.11 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of:

P.W.D. Building 2015 21.11.3 150 mm dia 1.00 Each 217.00 217.00

50 P.W.D. Building 2015 19.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

P.W.D. Building 2015 19.5.2 20 mm nominal outer dia .Pipes. 75.00 mtr 167.00 12525.00

P.W.D. Building 2015 19.5.3 25 mm nominal outer dia .Pipes. 100.00 mtr 213.00 21300.00

51 P.W.D. Building 2015 19.14 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required:

P.W.D. Building 2015 19.14.2 Long nose bib cock (500 grams 2 each 455.00 910.00

P.W.D. Building 2015 19.14.17 Towel ring (150 mm dia) 2 each 338.00 676.00

P.W.D. Building 2015 19.14.8 Basin mixer pillar tap with spout (1000 grams) 3 each 1248.00 3744.00

P.W.D. Building 2015 19.14.11 Hand shower set with flexible extension pipe 1 each 754.00 754.00

P.W.D. Building 2015 19.14.14 Soap dish plate 1 each 163.00 163.00

52 P.W.D. Building 2015 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 2000.00 lit 7.30 14600.00

53 P.W.D. Building 2015 4.4 Providing and placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete :

P.W.D. Building 2015 4.4.3 Kickers (320mm wide, 5mm thick). 158.12 sqm 421.00 66568.52

54 P.W.D. Building 2015 19.7 Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete

P.W.D. Building 2015 19.7.4 32 mm dia. nominal bore 50.00 rm 318.00 15900.00

55 P.W.D. Building 2015 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 100.00 sqm 371.00 37100.00

56 P.W.D. Building 2015 12.65 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm

P.W.D. Building 2015 12.65.2 Pigment Coloured (rubber mould) precast interlock concrete blocks 100.00 sqm 632.00 63200.00

TOTAL COST RS. 2016409.00 20.16

Sub Engineer Sub Divisional Officer Executive Engineer

P.W.D.(B&R) Sub Division P.W.D.(B&R) Sub Division P.W.D.(B&R) Division

chhuikhadan chhuikhadan Khairagarh

Technical Sanction Detailed Estimate for Construction of Storage Room in Government Garden Nursery Birutola Chhuikhadan Distt- Khairagarh-Chhuikhadan-Gandai (C.G.)

S. No SOR No Particular's of Item Measurement Qty Unit Rate Amount

1 1.2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). 1.00 18.00 15.00 - 270.00 sqm 7.20 1944.00

2 1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

1.1.1 In all types of soils.

IN HORIZONTAL DIRECTION

IN VERTICAL DIRECTION

plinth protection

3 1.6 Extra for every additional lift of 1.5 m or part thereof

1.6.1 All types of soils

Septic Tank 1 3.50 2.50 0.60 5.25 cum

4 3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work

3.1.3 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size).

septic tank 1 3.50 2.50 0.10 0.88 cum

IN HORIZONTAL DIRECTION

IN VERTICAL DIRECTION

PLINTH PROTECTION

VARANDAH 1 9.00 3.60 0.10 3.24 cum

5 1.25 Diluting chemical emulsion (chlorpyrifos/ lindane) in water as per manufacturers recommendation and injecting for pre-constructional curative cum preventive anti-termite treatment:(Five year service guarantee bond to be signed by contractor)

1.25.1 Surface treatment by spreading emulsion under floor, over the plinth area before laying base concrete @ 5 litres / sqm

1.25.2 Treatment of inside of plinth masonry wall on using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diameter holes in plinth wall below plinth protection at the interval of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand). 1 168.64 168.64 mtr 19.00 3204.16

6 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete.

VARANDAH 1 9.00 3.60 0.90 29.16 cum

for plinth protection 2 13.40 0.60 0.60 19.20 cum

AS PER EXCAVATED QTY 139.16 cum

footing & column up to GL 23.83 cum

7 1.17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. 108.19 cum 65.00 7032.35

8 3.2 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work

3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size).

for column footing

SQUARE PART 16 1.40 1.30 0.30 8.74 cum

SQUARE PART 5 1.20 1.10 0.25 1.65 cum

septic tank 1 3.30 2.30 0.10 0.76 cum

column upto G.L.

GROUND BEAMS (200X400)

IN VERTICAL DIRECTION

column upto p.L.

3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:

COLUMN UPTO SLAB LEVEL

IN HORIZONTAL DIRECTION

IN VERTICAL DIRECTION

SLAB AREA(PER METER WIDTH)

MAIN BUILDING 1 13.60 12.40 0.125 21.08 cum

SEPTIC TANK 1 3.50 2.50 0.125 1.09 cum

PROJECTION 1 38.40 0.30 0.125 1.44 cum

LINTEL & CHHAJJA PROJECTION

9 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete:

3.12.2 Thermo-Mechanically treated bars FE 500D As per total RCC qty 57.27 cum

10 2.1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

2.1.1 Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.

for column footing

COLUMN UPTO SLAB LEVEL

2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape

column upto slab level

2.1.8 Beams, lintels, cantilevers & walls

2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ)

11 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand)

inner side of retaining walls

IN HORIZONTAL DIRECTION

IN VERTICAL DIRECTION

FOR PLINTH PROTECTION

12 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in

7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand

7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:

BRICK WORK UPTO SLAB LEVEL

Deduction for opening

13 9.18 Providing and fixing in position doors, windows and ventilators frames made of cold rolled pressed steel sheet framed profiles made from commercial M.S. Sheets conforming to I.S. 513 of 1973 and as per general specifications of I.S 4351 including hinges jamb, lock jamb, steel butt hinges, base tie, joints mitred and welded with 10cm long legs of size 15x3mm M.S. flat, embedded in cement concrete blocks 15x10x10cm size of grade M-10 or rawl plugs and screws or with fixing clips or with bolts and nuts including neatly compacted filling M-10 cement concrete in

9.18.1 Single rebate/ mullion 80mmx50mm size, 1.25mm thick sheet

14 8.3 Providing 40x5mm iron hold fast 40cm long including fixing to frame with 10mm bolts nuts and wooden plug and embedding in Cement Concrete 1:2:4 in blocks of size 30x10x15cm.

D 18 18.00 each

15 8.12 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges.

8.12.2 35 mm. thick (single leaf)

16 8.24 Providing and fixing 30mm thick wire gauge shutter having top and style rail 95mm width, bottom and lock rail 197mm width, using galvanized M.S. wire dia of 0.45mm for doors, windows, clerestory windows excluding hinges.

8.24.1 Teak Wood

17 8.77 Providing and fixing antique/ SS finished brass butt hinges with antique/ SS polished MS screw complete:

8.77.1 125x85x5.50mm (Heavy Type)

for wire guage shutter 9x3 27.00

18 8.79 Providing and fixing antique/ SS finished brass sliding door bolt with necessary bolts, nuts and antique/ SS polished MS screw complete:

19 8.80 Providing and fixing antique/ SS finished brass door latch with antique/ SS polished MS screw complete:

20 8.81 Providing and fixing antique/ SS finished brass tower bolts (Barrel type) with antique/ SS polished MS screw complete:

21 8.84 Providing and fixing antique/ SS finished brass handles with antique/ SS polished MS screw complete

22 8.90 Providing & fixing 150mm antique/ SS finished brass floor door stopper with rubber cushion and antique/ SS polished MS screw complete to suit the shutter thickness 14x2 28.00

23 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.

taken 30kg/sqm 247.50 kg 67.50 16706.25

24 9.47 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately

9.47.1 For fixed portion

taken 7kg/sqm 65.31 kg 331.00 21617.61

25 9.47 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately:

9.47.2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately).

26 9.49 Extra for polyester powder coated (minimum 50 micron) aluminium sections instead of anodized.

27 9.51 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item):

28 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand

OFFICE 1 4.00 3.50 14.00 sqm

VARANDAH 1 9.00 3.60 32.40 sqm

for plinth protection 2 13.40 0.80 21.44 sqm

lintel & chhajja projection

29 11.2 Providing and making 12mm thick cement plaster of mix:

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand)

OFFICE 2 4.00 3.50 28.00 sqm

VERANDAH 2 9.00 3.50 63.00 sqm

TOILET 2 1.50 3.50 10.50 sqm

Window elevation 5 1.00 6.00 30.00 sqm

TOTAL 351.30 sqm

30 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:

11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand)

outter peripheri 1 38.40 4.50 172.80 sqm

SEPTIC TANK 2 3.50 3.20 22.40 sqm

31 12.49 25 mm thick KOTA stone slab flooring over 20mm (Average) thick base of cement mortar 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing etc. complete (Area of slab to be over 0.20 sqm and upto 0.50 sqm)

12.49 Size 600x600mm thickness 8 to 9mm

OFFICE 1 4.00 3.50 14.00 sqm

VARANDAH 1 9.00 3.60 32.40 sqm

TOILET 1 2.50 1.50 3.75 sqm

STORE 2 4.00 0.10 0.80 sqm

OFFICE 2 4.00 0.10 0.80 sqm

VARANDAH 2 9.00 0.10 1.80 sqm

TOTAL 116.13 sqm

32 14.54 Providing and applying plaster of paris putty over plastered wall surface including scaffolding complete

14.54.2 More than 2 mm to 4mm thickness to make surface even and smooth in line and level.

qty of 6mm 158.72 sqm

qty of 12mm 331.62 sqm

qty of 15mm 230.40 sqm

33 14.59 Providing and applying Polymaric cement primer on all surface applied @ 0.80 litrs/10 sqm as per relevant IS. code 15489:1974 (product such as Birla white primacoat/activcoat, Asian Trucare , Dulux interior cement primer, Opus Calista / I10) with all tool tackles and labour etc. complete for the work

qty taken as putty 720.74 sqm 29.00 20901.46

34 14.63 Providing and applying Economy Plastic emulsion paint with roller application minimum three coats appied @ 1.25 lit / 10 Sqm up to final finish as per relevant I.S. Code 15489:2013_Type -1 Class D & C (Glossy and Semi Glossy Finish) of required shade (product such as Tractor emulsion, Dulux Promise, Nerolac Bueaty Silver, Berger bison/breeze , Opus I30/ Style Paint) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour complete for the work . (With 2 Year warranty).

qty of outer plaster 14.40 sqm 74.00 1065.60

35 14.65 Providing and applying Luxury plastic enmulsion paint with roller application minimum three Coats applied @ 1.25 lit / 10Sqm up to final finish as per relevant Type 1 Class D,C,B&A (Glossy /Semi Glossy and Matt , Egg Shell or Satin finish ) of required shade (Product such as Asian Royale Shyne,Dulux Velvet Touch, Berger Silk Luxury Emulsion ,Nippon Impression Pearl, Opus Pure Elegance) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc, complete for the work. (with 4 Years Warranty )

36 14.79 Providing and applying ready to apply POLYURETHANE MODIFIED WOOD FINISH on new wood work in two coats with spray machine after preparing surface by rubbing down smooth with sand papers 180. this should be followed by smooth sanding with sand paper 320 or 400. wipe the surface to clean off loose dust particles for secong coat applied @0.10L/Sqm (product such as Asian Paints TouchWood, Dulux sadoline interior, Berger wood keeper 1KPU ) inclusive of providing abro tape on edges and article and cleaning of adjucent surface with all tools, tackles and labour etc. complete for the work.

37 14.71 Providing and applying satin/ matt finish Enamel paint mimimum 2 Coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work

38 18.4 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :

18.4.1 White pedestal type 1.00 Each 2882.00 2882.00

39 18.17 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :

40 18.23 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of brackets, cutting and making good the wall wherever required :

41 18.13 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete:

18.13.1 Flat back half stall urinal of size 460x380x250mm 3.00 Each 1776.00 5328.00

42 18.16 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe. 1.00 Each 1401.00 1401.00

43 18.76 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592(4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete.

44 21.2 Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge beyond 90 metre & upto 150 metre depth below ground level.

21.2.2 Rocky strata including Boulders.

45 19.47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :

46 19.52 Constructing masonry Chamber 60x45x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand :10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 7 7.00 each 4133.00 28931.00

47 19.15 Providing and fixing stainless steel drain jali of approved make/quality. 2 2.00 each 51.00 102.00

48 21.5 Supplying, assembling, lowering and fixing in vertical position in bore well, ISI marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per IS: 1239 (Part-1&Part-2) 1992 with IVth revision (Up-to-date amendments), of reputed & approved make, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer- in-charge.

49 21.11 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of:

50 19.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

19.5.2 20 mm nominal outer dia .Pipes. 1 75 75.00 mtr 167.00 12525.00

19.5.3 25 mm nominal outer dia .Pipes. 1 100 100.00 mtr 213.00 21300.00

51 19.14 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required:

19.14.2 Long nose bib cock (500 grams 2 2 each 455.00 910.00

19.14.17 Towel ring (150 mm dia) 2 2 each 338.00 676.00

19.14.8 Basin mixer pillar tap with spout (1000 grams) 3 3 each 1248.00 3744.00

19.14.11 Hand shower set with flexible extension pipe 1 1 each 754.00 754.00

19.14.14 Soap dish plate 1 1 each 163.00 163.00

52 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

53 4.4 Providing and placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete :

54 19.7 Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete

19.7.4 32 mm dia. nominal bore 1 60 60.00 rm 318.00 19080.00

55 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete.

56 12.65 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm

12.65.2 Pigment Coloured (rubber mould) precast interlock concrete blocks 1 25.00 10.00 250.00 sqm 632.00 158000.00

TOTAL COST 2232463.00

ELECTRIFICATION WORK 12 % OF TOTAL COST 267896.00

GRAND TOTAL 2500359.00

SAY RS. IN LAKS 25.00

Sub Engineer Sub Divisional Officer Executive Engineer

P.W.D.(B&R) Sub Division P.W.D.(B&R) Sub Division P.W.D.(B&R) Division

chhuikhadan chhuikhadan Khairagarh

&%% Hkou dk fo'ks"k ejEer laca/k izi= %%&

1- dk;Z dk uke %& 'kkldh; egkfo|ky; Hkou NqbZ[knku dk fo'ks"k ejEer dk;ZA S.R. ESTIMATE FOR CEMENT CONCRETE ROAD AND REAINING WALL IN K.M. 6/4 OF BAIKATORI GARRA ROAD

2- fo/kkulHkk {ks= %& [kSjkx<+

3- dk;Z dk fuekZ.k %& fo'ks"k ejEer dk;ZA

4- Hkou fuekZ.k o"kZ %&

5- izLrkfor fo'ks"k ejEer dk;ksZ dk fooj.k %& fo'ks"k ejEer dk;ZA

6- izLrkfor fo'ks"k ejEer ds vfrfjDr 'ks"k Hkou dh fLFkfrA %& Bhd gSA

7- foxr o"kZ rFkk orZeku o"kZ esa mDr Hkou gsrq Lohd`r fo'ks"k ejEer dk;ksZ dk fooj.kA %& fujad

8- D;k izLrkfor dk;Z okf"kZd la/kkj.k ds vUrxZr ugha fd;s tk ldrs gSA %& ugha

9- D;k {kfrxzLr Hkkxksa ds QksVksxzkQ fy, x;s gSA %& QkVksxzkQ layXu gSA

10- Hkou dk izdkj %& 'kkldh; egkfo|ky; Hkou NqbZ[knku

11- Hkou ds {kfrxLr gksus ds eq[; dkj.k rFkk 'kh?kz iqu% {kfrxLr u gks bl laca/k esa lq>ko@izLrko %& Hkou vR;f/kd iqjkuk gksus ds dkj.k njoktk f[kM+dh] VkbZYl ,oa lsusVjh fQfVax vkfn [kjkc gks pqdsa gSA vr% mDr dk;Z dk fo'ks"k ejEer dh vR;Ur vko';drk gSA

12- orZeku o"kZ esa mDr Hkou ij okf"kZd la/kkj.k rFkk fo'ks"k ejEer ds vUrxZr fd;s x, O;; dk fooj.k %& fujad

13- orZeku o"kZ esa fo'ks"k ejEer gsrq miyC/k vkcaVu %& i;kZIrA

14- pkgh xbZ Lohd`fr jkf'k %& :- 5 yk[k

15- dk;Zikyu vfHk;ark dk fujh{k.k izfrosnu %& 04-04-2025

16- vU; fooj.k %& fo'ks"k ejEer dk;Z djkus ls Hkou mi;ksx djus yk;d gks tkosxkA