Supply Installation testing and commissioning of CCTV Surveilance System at Zanana Park Behind New Secretariat Jammu. 2nd call

Supply, Installation, Testing & Commissioning (SITC) of 6 MP IP Bullet Long Range Network Camera with 1/2.7" Progressive Scan (having Lens 3.6 mm) CMOS sensor, maximum resolution of 3280 × 1850, and advanced AI-based human & vehicle classification analytics. The camera shall support H.265+/H.265/H.264 compression, True WDR of 120 dB, 3D DNR, built-in microphone, and IR illumination up to 50 meters for superior low-light performance. The camera shall support face capture, perimeter protection, intrusion detection, line crossing detection, motion detection, and smart event analytics. It shall have microSD card support up to 512 GB, ONVIF Profile S/G compliance, 1 Audio In/Out, 1 Alarm In/Out, and RJ45 10/100 Mbps Ethernet interface. The camera shall be housed in a metal enclosure with IP67 weatherproof and IK10 vandal-resistant protection, powered through 12V DC or PoE (IEEE 802.3af), complete with all mounting accessories and required accessories for seamless operation. With CAMC for 3 years as DLP of 1 year (Make :- Honeywell, Matrix or equivalent )

Supply, Installation, Testing & Commissioning (SITC) of 32-Channel Network Video Recorder (NVR) supporting up to 32 IP camera inputs with H.265+/H.265/H.264+/H.264 video compression and incoming bandwidth of 256 Mbps. The NVR shall support AI-based facial recognition, human face capture, face picture comparison, intelligent motion detection with human/vehicle classification, smart search, and smart playback functions. The recorder shall provide independent HDMI and VGA outputs with HDMI resolution up to 4K (3840 × 2160), support recording up to 12 MP resolution, and offer decoding capacity of up to 2 channels @ 12 MP, 3 channels @ 8 MP, 6 channels @ 4 MP, or 12 channels @ 1080p. The NVR shall support 2 SATA HDD interfaces with storage capacity up to 10 TB per HDD, 16-channel synchronous playback, Gigabit Ethernet interface, audio input/output, alarm I/O, USB ports, and ONVIF-compatible network integration. The unit shall support secure transmission through TLS encryption, remote access, and complete installation with all necessary accessories, connectors, configuration, testing, and commissioning.(Make :- Honeywell,Matrix or equivalent )

Supply, Installation, Testing & Commissioning (SITC) of unmanaged Gigabit PoE Ethernet Switch with 4 × 10/100/1000 Mbps PoE ports, 1 × Gigabit Ethernet uplink port, and 1 × SFP uplink port. The switch shall support IEEE 802.3af/at PoE standards with a total PoE power budget of 60W and up to 30W power output per PoE port. The switch shall support long-range PoE transmission up to 250 meters on PoE ports, along with VLAN, QoS, Extend Mode, and PoE watchdog functions for enhanced network reliability and video surveillance applications. The switch shall provide a switching capacity of 12 Gbps, auto MDI/MDI-X, store-and-forward switching architecture, and 6KV surge/lightning protection. The device shall support plug-and-play operation without configuration and be suitable for IP cameras, wireless access points, IP phones, and other PoE-enabled devices. The switch shall be supplied complete with power adapter, mounting accessories, interconnecting hardware, testing, commissioning, and all accessories required for satisfactory operation.(

Supply, Installation, Testing & Commissioning (SITC) of unmanaged Gigabit PoE Ethernet Switch with 8 × 10/100/1000 Mbps PoE ports and 2 × SFP uplink ports. The switch shall support IEEE 802.3af/at PoE standards with a total PoE power budget of 120W and up to 30W power output per PoE port. The switch shall support long-range PoE transmission up to 250 meters on PoE ports with Extend Mode enabled, making it suitable for IP surveillance and network expansion applications. The switch shall provide a switching capacity of 20 Gbps, auto MDI/MDI-X on all ports, store-and-forward switching architecture, and 6KV lightning/surge protection. The device shall support VLAN isolation, QoS prioritization, PoE watchdog, and Extend Mode through DIP switch configuration. The switch shall be plug-and-play, requiring no software configuration, and shall be suitable for connecting IP cameras, wireless access points, IP phones, and other PoE-enabled devices. The switch shall be supplied complete with power supply, mounting accessories, interconnecting hardware, installation, testing, commissioning, and all accessories required for satisfactory operation. • Supports IGMP / IGMP Snooping v1, v2, v3. • Should support congestion control on all ports.

Supply, Installation, Testing & Commissioning (SITC) of 16-Port Gigabit Unmanaged Ethernet Switch with 16 × 10/100/1000 Mbps auto-negotiating RJ45 ports supporting auto MDI/MDI-X functionality. The switch shall comply with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x Flow Control, IEEE 802.1p QoS, and IEEE 802.3az Energy Efficient Ethernet (EEE) standards. The switch shall provide a switching capacity of 32 Gbps with a forwarding rate of 23.81 Mpps and support store-and-forward switching architecture, 8K MAC address table, storm control, port isolation, and QoS with 8 priority queues. The unit shall feature a fanless metal chassis for silent operation, plug-and-play installation without configuration, and energy-saving features based on link status and cable length detection. The switch shall support rack-mount installation, operate on 100–240V AC power supply, and be supplied complete with mounting accessories, power cord, testing, commissioning, and all accessories required for satisfactory operation.(Make :- D-Link,Cisco or equivalent )

Supply Installation Testing and Commissioning of Enterprise Surveillance HDD of 6TB(Make:- WD,Seagate,Toshiba) .

Supply Installation Testing and Commissioning ofO. F.Cable 06F Outdoor - Armoured Unitube SM - HDPE Sheath (OS1). Fiber type 9/125 / G.652D & Refractive Index should be 1.4670/1.4675. Standard ISO 11801, IEC 60793-1/60794-1-2 & ITU-T-REC G.652D. Testing methods in accordance with the following standard Telecordia : GR-20 Core, ISO : 11801. Jacket Thickness 1.8 + 0.2 mm, Outer diameter should be 9 ± 0.3 mm. 3000N/100mm Crush Load (IEC 60794-1-2-E3). Bend Radius (IEC 60794-1-2-E11 & E6) should be Short Term 20D in mm & Long Term 10D in mm. Pulling Tension: Short Term 2000N, Long term 1000N pulling tension (IEC 60794-1-2-E1). Mode field diameter 9.2um ±0.5, Clad Diameter 125um ±1.0. Dispersion At 1285 - 1330nm should be <=3.5 ps/nm.km. Dispersion At 1550nm should be <=18.0 ps/nm.km. PMD value <=0.2 (ps/km). Maximum Attenuation at 1310nm should be <=0.36 dB/km. Maximum Attenuation at 1550nm should be <=0.22 dB/km. Cabled Cutoff Wavelength should be <=1260 nm. Operating Temperature should be – 20 deg C to +60 deg C. All Passive of the same make. (Copper, Fiber & Racks). OEM Should have International certification for Industrial Cyber Security Capability (Like - IEC-62443-4-1:2018 or Equivalent).(Make:- D-Link,Molex,Honeywell)

Supply Installation Testing and Commissioning of CAT6 UTP 23AWG Solid305M Outdoor. cable shall be compliant with TIA/EIA-568-C.2 channel performance & ISO/IEC 11801 & RoHS compliant. Operating Temperature: -20˚C to 60˚C, Storage Temperature: -20˚C to 60˚C. OEM for the cable Box & all copper Accessories from same OEM. OEM should have Indian based operation at least for a period of 20+ years & should have an Annual Turnover of Rs. 500 Crores & above in any of last three consecutive Audited Financial years. OEM International certification for the ISO 45001, ISO 9001, ISO 14001, & ISO 14064-1.(Make:- D-Link,Molex,Honeywell)

Supply Installation Testing and Commissioning of Category 6 RJ-45 Connector.

Supply Installation Testing and Commissioning of Category 6 UTP Patch Panel Blank Punch Down 24 Port..