Supply, installation, testing and commissioning of balance works of Fire fighting, Fire detection and Fire alarm system at Girls Hostel (PG) Block A and B Govt. Medical College Jammu.

Amount

Supplying, installation, testing & commissioning of over ground M.S Pipes (B class) including cutting holes & chases in bricks or RCC wall/slab & making good the same,painting with one coat of primer and two coats of synthetic enamel of approved shade of following sizes:

a) 200 mm dia

b) 150 mm dia

c) 100 mm dia

d) 80 mm dia

e) 25 mm dia

Supplying, installation, testing & commissioning of single headed oblique pattern SS hydrant Landing valve with 80mm dia flanged inlet and 63mm dia Instantaneous type female outlet complete with cap and all Accessories ISI marked.

Supply & installation of SS 63mm dia short branch pipe with 20mm dia nozzle , ISI marked.

Supplying, installation, testing & commissioning of 25mm dia spring loaded air release valve with isolation cork.

Supplying & laying of 3.5 core, 10 sqmm Aluminum cable from motor to electrical panel for automation of the system.

Supplying & lying of 3.5 core, 35 sqmm aluminum cable from motor to electrical panel for automation of the system.

Supplying, installation, testing & commissioning of Diesel Engine driven Pump Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520 with capacity 1620 LPM at 70 m Head; with Base fram & exhaust , coupling, battery with charger equipment, fuel tank, AVM pads etc. complete as required.

Supplying, installation, testing & commissioning of horizontally centrifugal end suction pump complete for delivery 1620 LPM against a total Head of 70 m with suitable three phase motor with speed of 2900 rpm with bronze impeller and coupling, base frame and AVM pads complete as required. The pump shall be provided with mechanical seal.

Supplying, installation, testing & commissioning of horizontally mounted centrifugal pump complete for delivery 180 LPM against a total Head of 70mtrs. With 10 HP three phase motor with speed of 2900 rpm with bronze impeller and coupling, base frame and AVM pads complete as required. The pump shall be provided with mechanical seal.

Supplying, installation, testing & commissioning of Air vessel 250mm dia and 1.2 m high with dished top, made of 8 mm thick MS pipe complete with 25 mm dia gun metal air release valve, pressure guage & all accessories as req and painted.

Earthing with G.I earth plate 600 x 600 x 6 mm thick including accessories & providing masonry enclosure with M.S cover plate & Watering pipe of 40 mm dia etc. as required with charcoal and Salt including excavation and back filling complete as required.

Supplying & fixing a set of GI fire bucket with round bottom each set comprising of 4 Nos of buckets each of 9 L capacity including fixing suitable brackets in the hook for holding buckets painted with red paint & filled of sand in 2 buckets of each set.

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.

Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.

Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supplying, installation, testing & commissioning 'fire alarm' sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & Suitable for operation with amplifier i/c line matching transformer etc. complete as required.

Supplying & laying of 2x1.5 sq.mm 'fire alarm' cable alongwith PVC conduit , 600/1000V rated conforming to the relevant IS Codes

Supplying, installation, testing & commissioning sector panel suitable for 10 zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.

Supplying of ABC type 'fire extinguishers' filled with MAP-90 powder, 4 kg capacity. Complete with discharge arrangement, high-pressure hose pipe, leak detection tested and ISI approved with standard warranty .

Supplying of CO2 type 'fire extinguishers' 4.5 kg capacity. Complete with discharge arrangement, high-pressure hose pipe, leak detection tested and ISI approved with standard warranty .

supplying of 5 Kg ceiling mounted 'fire extinguisher' mono ammonium phosphate powder 90, stored pressure type, pressure gauge, auto discharge mechanism on temperature rise, Applicable on Class A,B,C and electrically started fire,leak detection tested and ISI approved with standard warranty .

Supplying of 'K type fire extinguishers' 9 litre capacity,complete with discharge arrangement, high-pressure hose pipe, Helium leak detection tested and ISI approved with standard warranty .

Topping of ABC type fire extinguishers 4 kg capacity & CO2 type fire extinguisher 4.5 kg capacity.

Insatallation ,testing & commissioning of the Automisation control panel by way of repairs & making good the damages to the panel to make it functional including servicing of components as required

Note:- 1. The measurable quantities may vary at the time of actual execution of the job and shall be paid as per actuals on the approved rates.

FIRE TECHNOS

M/s. Sairam Engineers