Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹65.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹72.0 L+₹6.9 L (10.6%)Rejected-Finance 03 FIRST FLOOR BHAU INSTITUTE OF INNOVATION ENTREPRENEURSHIP AND LEADERSHIP BIEL COEP TECH PUNE | PUNE | PUNE | MAHARASHTRA | 411005 | L2 | Rejected-Finance L2 | |
| 3 | L3₹84.5 L+₹19.4 L (29.8%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹94.6 L+₹29.5 L (45.2%)Rejected-Finance PLOT NO 1 HOUSE NO T 1 507 KOYNA HOUSING SOCIETY RUPEENAGAR PUNE 412 114 | PUNE | PUNE | MAHARASHTRA | 412114 | L4 | Rejected-Finance L4 | |
| 5 | Rejected-Technical | - | Rejected-Technical Technical Bid is Not Accepted |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
16 Sept 2024, 5:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Registrar, COEP Technological University Pune
COEP Technological University Pune
Renovation and Structural Strengthening Work for SC/ST Hostel Building Near Metallurgy Engineering Department, COEP Tech Pune
2024_DTEDM_1074470_1
COEPTech/BWC/Ten/Hos/Ren/24/04
Open Tender
Civil Works - Buildings
Item Rate
120 days
COEP Technological University Pune
As per Tender Document
2 documents required · 2 mandatory
₹10,000
₹1 L
COEP Technological University Pune
15 Oct 2024
23 Aug 2024
18 Sept 2024
23 Aug 2024
16 Sept 2024
23 Aug 2024
2 Sept 2024
Civil Work
Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc.complete.
Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts, complete.
Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.
Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete.
Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete
Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwing out the refusal outside etc. complete
Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete.
Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete.
Gently cleaning the surface of the stone masonry by sand blasting (Copper sand ) including all labour & machinery etc complete
Excavation for foundation in earth,soil of all types,sand,gravel and soft murum,including removing the excavated material upto a distance of 50m.beyond the building area and stacking and spreading as directed,dewatering, preparing the bed for the foundation and necessary backfilling, ramming ,watering including shoring and strutting etc. complete. (Lift upto 3.00 m.) By Manual Means
Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.
Providing and laying in situ cement concrete M10 of trap /granite/ quartzite / gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing with fully automatic microprocessor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete.
Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete
Providing second class Burnt Brick masonry with conventional / I.S. type bricks incement mortar 1:4 including scaffolding, racking out joints and watering etc. in pillar ofrectangular shapes as shown in the drawings or as directed complete.
Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.
Providing internal cement plaster 40mm.thick in Single coats in cement mortar 1:3 without neeru finish , to concrete , brick surface,in all positions including scaffolding and curing etc. complete. As per coep approved rate 3D
Providing internal cement plaster 20mm. thick in Single coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete.
Providing and applying gypsum plaster(with Gypsum material of Gypsum India/ MegaSign or equivalent make) with finishing with gypsum material in10 to13 millimeter thickness to previously plastered surface/or on newly brick surface (Excluding rough cast plaster)in all position including preparing and Finishing the surface scaffolding etc.complete.
Providing and laying telephone black/AmbaWhite /Cadbury brown/Rubyred/Ocean Brown granit e stone of18to20mm thick for door frame/dado /window box ingetc.OnC.M.1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete.
Providing 25 mm to 30 mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. a) One side polish
Providing 25 mm to 30 mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. a)both side polish
Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.
Providing and laying Vitrified MATT finish having decorative type of size 600 millimeter x600milli meter of 8 to10 millimeter thickness (ona existing flooring)with bonding chemical and confirming to IS15622-2006 (GroupBla) of approved make shade and pattern for flooringin required position laid on a bed of bonding chemical filling joints curing and cleaning etc .complete.
Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.
Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating with box
Providing and fixing in position anodised (as per IS 1868/1982) Aluminium fixed staggered ( Z Type) Ventilator with aluminium rectangular pipe 63 mm x 38.10 mm x 1.22 mm at weight 0.650 Kg/Rmt, Aluminium angle of size 15 mm x 15 mm x 1 mm, aluminium channel of 9 mm sizes, S.S.mosquito net of 304 Grade,4 mm thick float glass per detailed drawing and as directed by Engineer in charge etc.complete
Providing and laying machine cut machine Polished Kota stone flooring 25 mm to 30mm thick and required width in plain/diamond pattern on bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc.complete.
Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.
Providing and laying Polished Kota stone flooring With Hand-Cut Polished Kota Stones 25mmto30mm thick and required widthin plain/diamond pattern on bed of 1:6 Cement mortar including cement float, filling joints with neat cement slurry,curing, cleaning and Mirror Polishing etc .complete Note-Water absorption for kota stone should not exceed 0.05%.(Item to be used with prior permission of Superintending Engineer )
Providing leather finished polishing to Kota / Marble / Shahabad / Kadappa Stone slab by continuous grinding in 4 coats of different bits to receive rough and matty finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.
Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram /per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete.
Providing and applying laying Aggregate plasterin granite/marble stones,as decorative finish to give granite/marble like appearance to concrete ,brick or block surfaces in all position including preparation of surface smoothly ,evenly by racking of joints in case of Brick or block work including backing layer of 12mm thick with cement mortar1:3 with 2% integral cement waterproofing compound, roughening for wall keying hardening and drying the surface for a minimum five days gaps including second coat of cement lime mortar in to a proportion 1:4 preparing the surface for three coat of marble finish plaster giving athin coat of white cement and two parts of course calcite powder ,applying the mortar with steel float on the surface in proper evenness applying at coat of white cement and lime to set a smooth finish the napplying a thin coat of slurry made of white cement and black oxide colourinrequired proportion by the steel float to get black streakson the surface and curing the surface for two days including all materials and labour etc. complete.
Providing and fixing chain link of size 50x50mm, 8 gauge thick and fixed75mm above ground level on vertical M.S.Anglesof 40x40x6mm size,including excavating pits for foundation and embedded in C.C.block of 1:4:8mixof size 450x450x670mm. at 1.75 M . c/c with iron bar16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nut sand bolts and horizontal M.S. Angle sat top and bottom of 25x25x5mm size and vertical M.S. flat35x5mm and25x5mm horizontal including cross support of 40x40x6mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete.
Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete
Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface.(excluding primer coat) etc. complete. Bd.P.6 Page One Number 414 and Pre-approval of Superintending Engineer
Providing and applying two coats of synthetic enamel paint of approved colourtonew/old structural steel work and wood work in buildings ,including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat)etc.
Providing and applying priming coat over new wood and wood based surfaces, including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting, scaffolding etc. complete.
Removing old paint from steel and other metal surface sand making the surface seven with hand scrapping, scaffolding etc.
Providing and applying two coats of exterior weather shield paint of approvedmanufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete
Providing and applying one pack bonding coat between concrete members like RCC slabs, columns, beams, chajjas, pardis etc and cement mortar plaster using Hack Aid Plast of approved make & approved by Engineer in charge. Clean the concrete surface thoroughly to remove dust, dirt, grime, deshuttering oils and rub down to a clean surface. Apply Hack Aid Plast of approved make & approved by Engineer in charge by spray on the entire concrete surface. Provide a lean cement - sand dash coat over the same. Allow the dash coat to set for around 24 hours. Further plastering as per specifications can continue.
Providig and fixing welded mesh fabric for guniting of mesh size75 mm x75mm and10 guage thick including scaffolding etc.complete
Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 kg/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the ' c ' channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos M.S.powder coated but hinges of size 100 mm x 25MM x 2mm using 32 mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19 x 6 mm size steel screws including fixture fasting. Complete as per direction of engineer in charge
Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete
Providing and fixing 900 mm high S.S. 304 Grade Stainless steel railing with 40mm diameter and 1 .5mm thick at top, 40mm diameter and 1.5mm thick vertical supports spaced at 1.5 m center to center and 8mm thick toughened glass including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete
Providing and fixing European type white glazed earthenware coupled closet symphonictrap with symphonic low level white glazed 10 litres cistern with black back lite seat with all necessary pipe connection etc. complete.
Providing and fixing White glazed earthenware Wash Hand Basin of 45 x 30 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete.
Providing and fixing stainless steel sink of size 600x 510 x200mm incluidng coupling,outlet pipe ,elbow and other necessary fitting, finishing etc. complete.
Providing and fixing sink cock with regular swinging spout (Wall/floorMountedModel) with wall flange having flow rate upto 6.0Litr/Minute of Jaquar/Cera/Hindware/Perryware or equivalent make incluidng other necessary fitting,etc. complete asdirected byEngineerin charge. (Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)
Providing and fixing Autoclosing pillar cock of pressmatic tap of approved make or equivalent including all fixtures, fittings etc
Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.
Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete.
Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.
Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc
Providing and fixing on walls/ ceiling/ floor25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc
Providing and fixing on walls/ ceiling/ floor 15 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete
Providing and fixing on walls/ ceiling/ floor 25mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
Providing, laying and fixing P.V.C. pipe of 50mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
Providing and fixing 75mm diastabiliser pipe / P.V.C . soilvent /waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc.
Providing and fixing 100mm dia stabiliser pipe/ P.V.C. Soilvent /waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc.complete.
Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works.
Providing and fixing 10 cm PVC nahani trap with grating etc complete.
Providing coursed rubble masonry first sort of trap/granite/quartzite/gneiss stones in cement mortar1:6 in superstructure including racking out joints on the inside when plastering is to be done, watering and scaffolding etc. complete. Bd.H.14 Page One Number 333, 28.12 BDH 14 Providing coursed rubble masonry first sort for pillars of trap / granite / quartzite / gneiss stones in cement mortar 1:6 including pointing with cement mortar 1:3 scaffolding and watering etc.complete Providing, making, placing it in position, fixing it in C.M. 1:6 and also in C.M. 1:1 in joints STONE MASONRY to match exactly as the Existing Stone, in terms of SIZE OF STONE in width, depth and height, its FRONT SURFACE FINISH, TEXTURE, including THROUGH STONES at 1 m interval (both horizontal and vertical), including scaffolding with all leads and lifts etc. complete
Providing and fixing C.P. shower rose, shower arm & required accesaries for flushing Make- jagqur florintine
Providing and fixing C.P.wall mixer with provision for over head shower with 115 mm long bend pipe and wall flange of approved make including necessary sockets /union nut etc.complete. florintine
Providing and fixing C. P. Bottle trap of approved make or equivalent including all fixtures, fittings etc
Providing and fixing Handshower (healthfaucet) with 8mm dia.1mlong flexible tube having wall hook with approved make including necessary sockets/union nutetc.complete as directed by Engineer incharge.
Providing and fixing 15 mm dia. UPVC Ball valve with necessary fittings, remaking good the demolished portion etc. complete.Market Rate
Providing and fixing 25 mm dia. UPVC Ball valve with necessary fittings, remaking good the demolished portion etc. complete.Market Rate
Providing & fixing Special type of Z bracket 50 MM depth and 150 mm length incuding GI C-clamp , nut bolt for water supply line including all materail & required labour ,etc
Providing & fixing Convertible ring grating rectangular stainless steel make- Viking having glossy finish overall frame size 150*150mm including with all accessories etc.
Providing & making patti pointing with cement mortar , waterproof chemical , for stone masonry including , removing old pointing , curing etc. complete.
Transportation of excess soil not comsumed within the Site Boundry upto a lead of 7.50 kms. starting from any periphery of the site, using manual, mechanical equipments and machinery
Removing Np-2 and Np-3 class pipes including stacking at road side as directed by the Engineer in charge. Upto 900mm dia and above. etc complete.
Providing and applying priming coat on concrete/ masonary /Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other for eignmatter and sand papering as required etc.complete.
Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.
Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face Laminate on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock,,lock and finishing with French Polish etc. complete.
Providing and applying plaster with plaster of paris in 6mm thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete.
Electrical Work
Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. CSR No 1-1-9
Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25mm with accessories on wall/ceiling as per specification No: WG-MA/CON. CSR No 1-2-7
Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
Supplying and erecting mains with 2x2.5 sq.mm FRLSH copperPVCinsulatedwirelaidinprovidedconduit/trunking/inside pole/Bus bars or anyother places. as per specification No: WG-MA/BWCSR No. 1-3-2
Supplying and erecting mains with 2x4 sq.mm FRLSH copperPVCinsulatedwirelaidinprovidedconduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW CSR No.1-3-3
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR No.7-1-29
Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. CSR No. 1-6-23
Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. CSR No.1-6-1
Supplying and erecting modular type switch 16 / 20 A with indicator, dulyerected on provided plate and box with wiring connections complete.CSR No. 1-6-6
Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete CSR No. 1-6-10
Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. CSR No,1-6-11
Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO CSR No.1-12-2
Supplying and installing cat-6 STP cable suitable for networking complete as per specification CSR No. 1-10-5
Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected. CSR No.1-6-28
Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected CSR NO. 1-6-30
Supplying and erecting PVC Surface modular switch box with double mounting & front plate for 8 module complete duly connected CSR No. 1-6-31
Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module duly erected. CSR No.1-6-32
Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500mm) as per specification No. WG-NAS/RAK CSR No.1-12-18
Supplying and erecting anodized aluminium corridor / passage light LEDfitting (4 feet) Max. 22W with high transitivity diffuser with system lumensoutput of Min.2200lumens ,min.efficacyof100lumen/W,CRI>80,CCTupto6000K,BeamAngleof110deg.,Ripple<5%, THD<10%, p.f. >0.95,operating range of 200-270V, surge protection of 2 kV, Life class of 50,000Hrs.at L70B50, including driver, with end caps onprovided PVC Block / woodenboard with 3 years warranty. CSR No. 2-1-18
Supplying and erecting LED square / circular Max. 7W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. CSR No.2-1-2
Supplying and erecting Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendant holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box.CSR No. 1-5-7
Providing , fixing round plate of 100 mm dia for light point including all necessary required fittings , stagging , etc compete RA
Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD CSR No. 2-10-22
Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete CSR No. 2-10-13
Supplying & fixing anchor type fastener fan hook, with 2 nos. of 10 mm dia x75 mm long with necessary materials for ceiling fan.CSR No. 2-11-2
Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP CSR No. 9-1-3
Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP CSR No.9-2-8
Supplying and erecting bus bar chamber triple pole with neutral with fouraluminium bars, 500V, 100A having 15mm (Width) X 3 mm (Thickness), with 99.9 % aluminium purity as per E91E Grade & Current Density 0.8 A per sq. mm. compliance to IS 5082 and Enclosure fabricated with 16 SWG CRCAsheet and epoxy paint, with suitable number of ways and with SMC/DMCInsulators and accessories of suitable rating complete as per specification no. CP?BB CSR No. 6-2-1
Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB CSR No 5-4-1
Supplying, erecting & marking DPMCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCBSSR No. 5-3-8
Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB CSR no. 5-3-13
Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB CSR No.5-3-2
Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB CSR No. 5-6-2
Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V, 100A having 15mm (Width) X 3 mm (Thickness), with 99.9 % aluminium purity as per E91E Grade & Current Density 0.8 A per sq. mm. compliance to IS 5082 and Enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification no. CP?BB CSR No. 6-2-1
Supplying and erecting modular type blanking plate one module, duly erected on provided plate & box. CSR No . 1-6-24
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .