Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.6 LAccepted-AOC KALIBARI ROAD TINSUKIA TINSUKIA ASSAM 786171 | TINSUKIA | ASSAM | 786171 | L1 | Accepted-AOC DUE TO L1 RATE | |
| 2 | L2₹16.2 L+₹58,755 (3.76%)Rejected-Finance MILLONALLY LANE 3 POST TINSUKIA ASSAM PIN 786125 | TINSUKIA | TINSUKIA | ASSAM | 786125 | L2 | Rejected-Finance DUE TO RATE HIGH | |
| 3 | L3₹16.6 L+₹94,579 (6.05%)Rejected-Finance C O ADNEEDS ENTERPRISES TIRAPGATE TIRAPGATE LEKHAPANI TINSUKIA ASSAM 786182 UDYAM AS 26 0000077 | TINSUKIA | ASSAM | 786182 | L3 | Rejected-Finance DUE TO RATE HIGH |
Tender Value
₹14.9 L
EMD Value
₹29,800
Closing Date
7 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Lekhapani
Tinsukia, Assam
PROVN OF TOILET BLOCK NEAR HQ LINES AT LEKHAPANI MIL STN
2022_MES_540624_4
8675/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE Lekhapani
CLASS E CAT a(I)
4 documents required · 4 mandatory
₹500
GE Lekhapani
₹29,800
Yes
22 Dec 2022
15 Nov 2022
12 Dec 2022
15 Nov 2022
7 Dec 2022
23 Nov 2022
Amount
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil etc complete all as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation getting out in soft/ loose soil complete all as specified and directed.
Excavating over areas in n exc 1.5m deep and getting out in soft/loose soil,complete all as specified and directed.
All as per item No.3 above,but depth exc 1.5m deep but n. exc 3 m and getting out in soft/loose soil complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm of soft loose soil complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
M&L for loose filling with broken brick aggregates of gauge 80 to 150mm in soakage pit, soak well etc complete all as specified and directed
M&L PCC (1:4:8), type D-2, (using 40mm graded stone aggregates) as in foundations, filling, mass concrete etc complete all as specified and directed.
M&L RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in foundations, footings, plinth beams and similar works complete all as specified and directed.
All as per item No. 9 above, but in coloumns .
All as per item No. 9 above but in beams and lintels.
All as per item No. 9 above but in chajjas.
All as per item No. 9 above, but as in slabs supported on walls beams and columns in floors, roofs, landings, balconies, canopies, deck slabs,in shelves, slabs of septic tank, soak well etc and the like etc complete all as specified and directed
M&L precast RCC (1:2:4) type B-1 (usng 20 mm graded stone aggregate) in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar (1:4) complete (reinforcement to be measured separately) complete all as specified.
Use and waste of formwork to sides of concrete foundation, footings, base of coloumns, raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.
Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels. Cantilevers, shelves including supports, overhangs, etc also splays between floor and beam etc for rough finished flat surfaces of cocrete complete all as specified and as directed.
Use and waste of formwork to sides of pillars, posts, struts, piers, coloumns and stanchions for rough finished flat surfaces of concrete complete all as specified and directed.
Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished flat surfaces of concrete complete all as specified and directed.
Use and waste of formwork to soffits of suspended slab such as roof slabs, floor slabs, landing & similar work with rough finished flat concrete faces complete all as specified and directed.
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed.
M&L Brickwork with subclass ‘B’ bricks, straight for curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.
M&L Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM (1:4) complete all as specified and directed.
M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per Item No.23 above, but 6 mm to 8 mm dia complete all as specified and directed.
All as per Item No.23 above, but 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders complete all as specified and directed.
S & F for steel work of in hollow rectangular or square tubular trusses incl special shaped washer etc complete using ERW or HRW welded conforming to IS - 4923 (Yst-310)Complete all as seified and directed.
S&F for rolled mild steel Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachment conforming to Fe:410-W(Gde-E-250) quality-A complete all as specified and directed.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L Rrendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces and finished fair and even complete all as specified and directed.
M&L Prepration of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L Rendering 10.mm thick in CM ( 1:6) on fair faces of brick work or concrete surfaces including finishing top even and smooth without using extra cement complete all as specified and directed.
M&L Preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
M&L Preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paintover a coat of red oxide primer complete all as specified and as directed.
M&L for Glazed coloured ceramic tiles in vertical surface 300x450x6 to 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles laid over and including 10 mm thick rendering as in backing wall plaster in CM (1:4) complete all as specified and directed.
M&L for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile not exceeding 0.11 Sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and directed.
S & F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and ditrected.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having maximum density of 650 kg/Cum and screw withdrawal strength of 1800N (Face)& 900N (Edge), minimum compressive strength 50N/Sqmm, modulus of elasticity 800N/sqmm and resistance to spread of flame of class A category withproperty of being termite , norer proof and , water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star head counter sunk SS screws, all as per direction of Engineer-in-charge.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door / windows / Ceosetory windows & other frames/Chowkat of size 50x100mm comprising of virgin PVC polymer of K valve 58-60 (Suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having mimimum frame density of 750kg/cum, screw withdrawal strength of 2200N (Face) & 1100 N (Edge), minimum compressive strength of 58N/Sq mm, modulus of elasticity 900 N/ Sq mm and reristance to spread of flame of Class A category with property of being termite / borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge. (MS hold fast/lugs/SS dash fasteners shall be paid for separately.
S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F 150 mm size, aluminium anodised , barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S&F 250 mm length of bolt, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.
S&F 100 mm butt hinges, type B-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed to PVC door complete all as specified and as directed.
S&F 150 mm size aluminium handles, cast type, anodized and fixed complete all as specified and as directed.
M&L for Pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed
M&L for Hot dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550MPa as in ridge/valley/gutter/eaves boardings fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed
M&L 75 mm thick PCC ( 1:4:8 ), type D-2 (using 40 mm graded stone aggregate), as in sub base of floor complete all as specified and as directed.
M&L 50 mm thick, PCC (1:3:6) type C-1, (using 20 mm graded stone aggregates) laid in (1:20) slope as in plinth protection/pavings/shafts including makinjg joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/25 & two parts heated sand (by volume, surface finished even and smooth without using extra cement, complete all as specified.
M&L 50 mm thick, plain cement concrete (1:2:4), type B-1, (using 20 mm graded mechanically crushed stone aggregates) laid in (1:20) camber slope as in Footpath including making joints at 3.00 metre intervls, the joint shall be flled with mastic filling (to full depth) comprising of one part heatedn hot blown bitumen 85/25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement and spike rolling to surfaces or making impression of expanded metal, whilst the concrete is green, complete all as specified.
S&F GI pipes 15 mm dia bore (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F GI pipes 20 mm dia bore (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
S&F Fancy type long body 15mm dia Bib taps cast copper alloy, chromium plated screwed down to iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F Fancy type swan neck 15mm dia pillar taps, cast copper alloy with capstan heads, chromium plated , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipe & fixed complete all as specified and directed.
S&F Vitreous china wash down water closet, "Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of CI P/S trap embeded with cement concrete bedding complete all as specified and directed.
S&F Vitreous china wash down water closet, "Pedestal pattern with fixing bolt, plastic water closet seat cover, white, closed pattern with flat bottom and cover with aluminised hinging device, brass chromium plated jet shower with one meter long flexible pipe incl, scomplete all as specified and directed.
S&F Wash basins white, vitreous China, flat back, size 580x450mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed to wall complete all as specified and directed.
S&F Vitreous China urinal, half shall type, flat back, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal black in cement, including, 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, grating and union for discharge, waste pipe, urinal spreader etc complete all as specified and as directed.
S&F PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flush pipe, brackets all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F 40 mm Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqm as in waste water pipes complete all as specified and directed.
S&F 15mm bore dia stop valves / angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks of 1000 ltr capacity,(cylindrical vertical with closed top) double layered,hoisted and fixed in position all as specified in SSR part-I and as directed.
S&F 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high-density plastic ball, screwed for iron pipe and fixed (Minimum weight 210 gms) complete all as specified and as directed.
M&L 75mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F 32mm waste coupling of PTMT (half or full threaded) (minimum weight 40mm-60 gms) fixed complete all as specified and as directed.
S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, fixed to walls as complete all as specified and as directed.
S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, fixed to walls as complete all as specified and as directed.
S&F PVC (SWR) bends 110mm dia any radius as all as specified and directed.
S&F PVC (SWR) bends 75mm dia any radius as all as specified and directed.
S&F PVC (SWR) vent cowl 75mm bore fixed with pipe complete all as specified and as directed.
S&F PVC (SWR) pipes 160mm dia single socketed, in any length with rubber ring joints, laid in floor/trenches complete all as specified and as directed.
M&L PCC (1:3:6), type C-2, (using 40mm graded stone aggregates), as in bed to drain pipes of 160 mm bore including under and hauncihing against the sides of pipes after they are laid and tested complete all as specified and directed.
M & L for concealed point wiring complete with 1.5 sq mm FRLSH,PVC insulated multi stranded copper conductor two single core cable 1100 volts grade,drawn into non metalic PVC rigid conduit medium grade of size not less than 20mm bore and conduit accessories fixed on wall roof etc, and including provn of PVC insulated 1.5 sq mm copper conductor cable for each continuity and connected to common earth dolly and pressed steel terminal boxes made out of 1.6 mm thick MS sheet concealed in wall and laminated sheet cover of 3 mm thick on top for housing the switches socket,outlet etc.,for one light/fan point controlled by one one way switch complete all as specified and directed by Engineer-in-Charge. Note :- PVC conduit cutting chases of wall making good disturbed wall surfaces including finishing with cement mortor 1:4 matching with existing shade of the painted surface are deemed to be included in the quoted rate.
S&F Switch piano flush type, 6 amps, 230V AC,single pole, one way all as specified and directed.
S&F Ceiling rose surface type bakelite 65x50mm three terminal all as specified and directed.
S&F LED tube light fitting 4 ft. 1 x 18 watt with 230 volts, with bipin holder connector block, LED retrofit tube rod etc complete with all accessories internally pre-wired and fixed to walls/ceiling with screw on round PVC blocks including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make : LED Batten - Crompton Cat part No IG16LT8-16 or equivalent in philips/Wipro, Tube rod - Crompton Cat part No LTT8-20 or equivalent model in philips/wipro.
S&F LED bldg security light fitting 25W watt with 230 Volts with IP 66 protection, High Impact resistance complete with suitable size GI pipe mounting bracket,02 x MS Flat size 40x3 mm clamp set, nut/bolt/washers etc all accessories internally pre-wired and fixed to walls complete all as specified and directed. Make : Crompton Cat part No LSTS-25-CDL-M or techno-commercially equivalent model in Philips/Wipro
S&F Pressed sheet metal enclosure (MCB DB), single phase and neutral with 200 Amps rated bus bar, double door type, 240 volts including grouting in wall and connecting complete for 4 way all as specified and directed.
S&F MCB SPN 32 Amps'C' series, 230 volts AC and connecting using suitable size of wire all as specified and directed.
S&F MCB SP 6 to 32 Amps 'C' series, 230 volts AC and connecting using suitable size of wire all as specified and directed.
M&L Earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways and testing on completion,etc complete all as specified and directed by Engineer-in-Charge.
Supply and spread river sand in trenches as cable cushioning 8 cm below the cables and 15cm above the cable all as specified and directed. Note : - Only punned thickness shall be measured for payment purpose.
Supply and lay burnt bricks sub class 'B' standard size laid across the cable in trenches as protection to the cable all as specified and directed.
Supply,laying testing and commissioning of XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with glanded aluminium conductor of size 2 core, 16 sqmm laying/ passing through pipe/wall/floor/trenches,complete all as specified and directed.
S&F GI pipe, 40 mm bore, (light Grade) including necessary fittings/ accessories as in trenches/under floors or roads or along the pole including clamps with suitable nuts and bolts for protection of cables,complete all as specified and directed.
M&L Cutting existing steel tubing for alterations or additions (Each cut measured) of 20 mm bore complete all as specified and directed.
M&L Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) of 20 mm bore complete all as specified and directed.
S&F GI water tubing 20 mm dia (medium grade) including necessary fittings/ accessories like sockets, bend, elbow, union etc laying in trenches complete all as specified and directed.
M&L Gunmetal globe/gate valve of size 20 mm dia with iron wheel head, screwed both ends, ISI marked complete all as specified and directed.
M/S D R GOPE
ADNEEDS ENTERPRISE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .