PETTY REPAIRS FOR ATTENDING DAY TO DAY EM EXTERNAL TREATED WATER SUPPLY COMPLAINTS AT SHANKAR VIHAR VIKRAM VIHAR ANUJ VIHAR 200 DUS DGIS CAMS AND ALLIED AREA IN THE AREA OF AGE U WATER SUPPLY NO III UNDER GE U WATER SUPPLY DELHI CANTT 10

Amount

Attending day to day external treated water supply complaints of all nature i.e. leakage in water supply pipe lines, fittings/fixtures, over flow of overhead tank, no water supply including noting the complaints in complaint register complete all as specified and as directed. Note :- Material required for attending complaints shall be measured & paid separately under respectvie items here-in-after.

Notes for Srl No. 1 :- The rates quoted by the contractor shall deemed to be included for the following :- (i) The complaints shall be attended and the defects shall be rectified by a team of experienced Plumber as applicable assisted with adequate number of helpers passed matriculation and having minimum 03 years experience in same field. (ii) The complaints shall be attended & defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 100/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from his dues. Contractor rep shall be available wef 0800 Hrs to 2000 Hrs to recieve and notify complains.

(iii) In case , after checking & attending the defect,if it is not possible to rectify the defect within 08 hrs, the facts shall be brought to the notice of Engineer-in-charge by the contractor/his rep. If Engineer-in- charge is satisfied with contractor's view, no recovery will be made. (iv) While attending the complaint of water supply/Electric supply if earth work is required then the same shall be measured and paid seperately under appropriate item of Sch 'A'/BOQ. However no extra payments shall be made for dewatering. (v) All T&P required for attending the complaints shall be provided by the contractor without any extra. (vi) The pipe fitter shall always be in possession of die set complete with cutters,Taps, Pipe wrench ,Chain wrench, Caulking tools, complete set of spanners and ladders etc..,as required at site. (vii) Rate for Taking down/out existing fittings & fixtures and refixing to make it functional shall be taken into account

Supply only UPVC Socket, ISI Marked complete all as specified and as directed of following sizes

UPVC Socket 20 mm bore

UPVC Socket 25 mm bore

UPVC Socket 32 mm bore

UPVC Socket 40 mm bore

UPVC Socket 50 mm bore

UPVC Socket 63 mm bore

UPVC Socket 90 mm bore

UPVC Socket 110 mm bore

Supply only UPVC Elbow, ISI Marked complete all as specified and as directed of following sizes

UPVC Elbow 20 mm bore

UPVC Elbow 25 mm bore

UPVC Elbow 32 mm bore

UPVC Elbow 40 mm bore

UPVC Elbow 50 mm bore

UPVC Elbow 63 mm bore

UPVC Elbow 90 mm bore

UPVC Elbow 110 mm bore

Supply only UPVC reducing socket, ISI Marked complete all as specified and as directed of following sizes.

UPVC reducing socket size 25 x20 mm bore

UPVC reducing socket size 32 x25 mm bore

UPVC reducing socket size 40 x32 mm bore

UPVC reducing socket size 50 x40 mm bore

UPVC reducing socket size 63 x50 mm bore

UPVC reducing socket size 90 x63 mm bore

UPVC reducing socket size 110 x90 mm bore

Supply only UPVC Tee, ISI Marked, complete all as specified and as directed of following sizes

UPVC Tee , 20 x 20 x 20 mm bore

UPVC Tee , 25 x 25 x 20 mm bore

UPVC Tee , 25 x 25 x 25 mm bore

UPVC Tee , 32 x 32 x 32 mm bore

UPVC Tee , 40 x 40 x 40 mm bore

UPVC Tee , 50 x 50 x 50 mm bore

UPVC Tee , 63 x 63 x 63 mm bore

UPVC Tee , 90 x 90 x 90 mm bore

UPVC Tee , 110 x 110 x 110 mm bore

Supply only UPVC Solid plug, complete all as specified and as directed of following sizes.

UPVC plug, 20 mm bore

UPVC plug, 25 mm bore

UPVC plug, 32 mm bore

UPVC plug, 40 mm bore

UPVC plug, 50 mm bore

Supply Only Service saddles, ISI marked, complete all as specified and as directed of following sizes.

63 x20 mm bore

90 x20 mm bore

110 x20 mm bore

Supplying and fixing in replacement UPVC pipes, of following sizes, pressure rating 10 kgf/cm2, heavy duty, with all pipe fittings such as ends, elbows,unions, tees, reducing tees, adoptors, sockets, plugs, hose clips etc. fixed to walls with fixing arrangements such as saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves , ceilings or in floors etc., complete with and cutting through walls, floors and their making good or laying in trenches and also cutting, screwing and waste including jointing with jointing material complete all as specified and as directed. Note :- Excavation & earth work shall be measured & paid separetely.

20 mm Bore

25 mm Bore

32 mm Bore

40 mm Bore

50 mm Bore

63 mm Bore

90 mm Bore

110 mm Bore

Supply and fixing in replacement High density polythene pipes (HDPE) pipes of following size bores, of pressure rating 10 kgf/cm2, heavy duty fixed complete to Trenches, walls, ceilings or in floors with fixing arrangements such as saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves , ceilings or in floors etc., complete with and including taking down old material complete all as specified and as directed. Note :- Excavation & earth work shall be measured & paid separetely..

90 mm Bore

110 mm Bore

160 mm Bore

Supply only 20 mm bore Bib tap of PTMT, any tint, high pressure screwed for male/ female threaded, for pipe of size 20 mm bore complete all as specified and as directed.

Taking up Cast Iron/ Ductile Iron water mains 100 mm bore including all fittings with spigot & socket ends of lead joints including burning out lead joints and recovering lead complete all as specified and as directed.

Taking up HDPE Pipe 150 mm bore including all fittings complete all as specified and as directed.

Taking up Cast Iron/ Ductile Iron water mains 200 mm bore including all fittings with spigot & socket ends of lead joints including burning out lead joints and recovering lead complete all as specified and as directed. Note for srl No 11 to 13 :- Excavation & earth work shall be measured & paid separately.

Supplying, Laying, jointing, testing and commmisioning DI Pipe of following sizes as per IS 8329-2000, class K-7 with inside cement mortar lining with spigot and socket ends laid in trenches complete all as specified and as directed . Note:- (i) Joints shall be measured & paid separetely. (ii) Fittings , if any shall be measured and paid separately.

100 mm bore

150 mm bore

200 mm bore

M&L for laying and jointing DI Fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars,tail pieces,caps and plugs Upto 200 mm bore conforming to IS: 9523 complete all as specified and as directed.

M&L for laying and jointing CI Fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars,tail pieces,caps and plugs Upto 200 mm bore conforming to IS: 1538-1993 complete all as specified and as directed.

Material & Labour for Rubber Gasket joint(Tyton) including jointing material for CI/DI Pipe of following sizes complete all as specified and as directed .

100 mm Bore

150 mm Bore

200 mm Bore

Supply Only lead pig bar complete all as specified and as directed.

Supply Only Spurn Yarn complete all as specified and as directed.

Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth for pipe line, etc in soft/ loose soil getting out and levelling of bottom surface to required level all as specified and as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.

Removing excavated material to a distance not exc 50 m and depositing where directed not exc 1.5 meters above the starting point complete all as specified and as directed.

Surface dressing of uneven surfaces of natural ground, rough excavated surfaces not exceeding 15 cm deep and filled area where ordered shall be trimmed to an even surface horizontal or slopping, by removing vegetation and by scrapping high patches and filling low patches with the scrapping soil to given an even and neat look to the site. complete all as specified and as directed.

An amount of Rs 115680.00 shall be deducted from BOQ on account of schedule of credit

Rahul Enterprises

Deven Associates

Microsys Controls India

Sumit Enterprises