Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.8 LAccepted-AOC | L1 | Accepted-AOC Rate is Low | |
| 2 | L2₹2.9 L+₹5,671.50 (2.01%)Rejected-Finance | L2 | Rejected-Finance Rate is High |
Tender Value
₹3.6 L
EMD Value
₹3,640
Closing Date
17 Dec 2024, 3:00 pmClosed
EXECUTIVE OFFICER, VADAKKANANDAL TOWN PANCHAYAT.
EXECUTIVE OFFICER, VADAKKANANDAL TOWN PANCHAYAT.
PROVIDING PIPELINE AT NORUKKU PARAI AND PROVIDING BORE WELL WITH MOTOR AT KACHIRAYAPALAYAM KULATHUMETTU STREET SANITARY COMPLEX IN VADAKKANANDAL TOWN PANCHAYAT.
2024_DTP_510231_1
216-2/2024/A1
Open Tender
Civil Works
Works
180 days
VADAKKANANDAL TOWN PANCHAYAT
See the Tender Notice
1 document required · 1 mandatory
₹0
₹3,640
Yes
18 Jan 2025
12 Dec 2024
18 Dec 2024
12 Dec 2024
17 Dec 2024
12 Dec 2024
Amount
Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc.,as per SS 20 A. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10 with standard specifications.
Towards cost and supply of 6kg 50 mm dia PVC Pipe from app company including of all charges etc.
Towards labour charges for Laying and Jointing of pipe and Specials including all charges etc., complete complying with standard specification.
Refilling the excavated earth other than sand including cost and conveyance of all other labour and material charges to site etc., complete complying with standard specifications.
Supply and Delivery of DI D/F Gate Valves (soft seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade GGG40, wedge fully rubber lined with EPDM, replaceable spindle nut, without gland packing and with 3 O-Ring protection on the shaft and seals of NBR and the valves should be of vaccum tight and 100% leak proof with face to face dimentions as EPR BS 5163-89/ ISI 14846-2000/ DIN 3202 F 4. All the valves should be with electrostatic powder coating both inside and outside with pocket less straight thro' body passage. All lthe valves are to be compatible for burried application with pressure rating PN 10/16
Conducting Geophysical survey including conveyance of survey instrument and other labour charges
Drilling of borewells of size 6" to 8" dia. in sedimentary formation using hand boresets including insertion of casing pipes and removal of casing pipes etc., including collection of samples as directed by the TWAD Board Officers.
Towards Cost & Supply of 165 mm dia PVC Casting pipe including all cost & Conveyance of all materials and labour charges etc., Complete. Without slot
Towards labour charges for inserting of casing pipe with and without slot pipe 165mm dia including cost & conveyance of all materials to site and all lobour charges etc.,complete..
Supply and delivery of 1 HP( 15 x 100 lpm x m ) 150 mm dia bore well submersible motor with pump set including all lab our charges etc., complete.,
Supply and delivery of 1.5 HP single phase panel board with automatic including cost & conveyance of all materials to site and all labor charges etc,. complete.
Supply and delivery finishing of HDPE Hose 50mm dia including loading, unloading transportation and labor charges for finishing of G.I pipe and specials for pi[e connection works including charges as directed by department.,
Supply and delivery cable wire 2.5 sq.mm 3 core submersible copper cable including all charges etc., complete complying with standard specification.
Supply and delivery of MS kiosk of size 0.75mx0.45mx0.75m made up of MS angle of size 50mmx50mmx3mm around covered with 18 gauge MS sheet and kiosk door made up of MS plates of size 25mmx3mm including, locking arrangements and labour charges etc., complete
Supply and erection of motor pump set with pipes and transport charges rethreading, motor fittings and all labour charges etc., complete.,
Supply and run of 4 x 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains SD(68)
Supply and run of 2 of 6sq.mm (84/0.3) PVC insulate SC unsheated Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class B) bent at both ends with necessary angle iron up right end supports for mains(SD 71)
Construction of Tank pedestial including all cost and Conveyance of all material and labour charges etc.,
Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., 1000 Litre
Towards cost and supply of GI Pipe 50 mm dia from app company including of all charges etc.
Towards labour charges for Laying and Jointing of pipe and Specials including all charges etc., complete complying with standard specification.
ANBU (BID ID -1211843)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .