PROVN OF STREET LIGHT ALONG ROAD LEADING TO OFFICERS MARRIED ACCN AT DSSC WELLINGTON

Amount

S & F steel tubular swaged poles, 9 meters long complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 inclusive of one primer coat of red oxide zinc chrome primer and two coats of aluminium paint including preparation of surfaces and writing Pole No complete all as specified and as directed. Make:IndiaTube & Co, India Electric Poles, National Tubing Co. Note : (i) Design/Drawing/BOM of pole is to be obtained from the Maufacturer/Authorised supplier and the same is to be got approved from Engr-in-Charge prior to placing final order to the Manufacturer/Supplier. (ii) Earth work and PCC shall be measured & paid separately.

Supply, fix and test LED street light fitting of capacity 90 Watts, with min 9000 Lumens output IP-66 protection, IK 07 including driver unit suitable for working voltage 140-270 V AC, 50 Hz, pressure die-cast aluminium housing with all accessories including GI pipe bracket made out of 40mm dia light grade pipe of length 1.2 Mtrs, bend to shape 120-130 degree and MS Clamps made out of 25 x 3mm flat iron 2 Nos including nut and bolts for fixing the bracket on the pole including one coat of red oxide primer and two coats of aluminium paint and connecting up complete all as specified and as directed. Make: Havells, Cat No: ENDURAPEARLPLUS SL90WLED757PASYTOPCASTCC or techno-commercially equivalent in Philips/Wipro

Supply, fix and test, LED Flood light fittings suitable for fixing on poles any type, of capacity 150 Watts, CRI>70, Power factor >0.95 colour temperature 5700 K, luminous efficacy not less than 100 lumens/watt, colour temperature 5700K, 15000 lumens output, IP-66 including electronic driver (SMPS based constant current supply with lower THD, output open/short circuit protection, phase to phase protection, over voltage protection, surge voltage protection etc) unit suitable for working voltage 140-270V AC, 50 Hz pressure die cast aluminium housing and finishing epoxy powder coated with all accessories as per manufacturer's instructions and connecting up including necessary fixing arrangement, in the form of MS clamps complete all as specified and as directed. Make: Havells, Cat No: JETAIRISFLS150WLE D757PSYMLTG or techno-commercially equivalent in Philips/Wipro.

Supply, fix and test LED Flood light fittingssuitable for fixing on poles any type, of capacity 120 Watts, CRI>70, Power factor >0.95 colour temperature 5700K, luminous efficacy not less than 100 lumens/watt, colour temperature 5700K, 12000 lumens output, IP-66 including electronic driver (SMPS based constant current supply with lower THD, output open/short circuit protection, phase to phase protection, over voltage protection, surge voltage protection etc) unit suitable for working voltage 140-270V AC, 50 Hz pressure die cast aluminium housing and finishing epoxy powder coated with all accessories as per manufacturer's instructions and connecting up including necessary fixing arrangement, in the form of MS clamps complete all as specified and as directed. Make: Havells, Cat No:JETAIRISFLS120WLED 757APWBLTG or techno-commercially equivalent in Philips/Wipro

S & F Garden light Castor Black fixture of size 230 mm x 1200 mm alongwith E-27 Bulb of 15W , 3000K with IP54 protection with fixing accessories including necessary coping & fixing arrangment complete all as specified and as directed. Make : Luker, Cat No (For Fitting) : LBF012E27, Cat No (For Bulb) : LBPC15CL or techno-commercially equivalent in Philips/Havells

S & F loop in- loop out fuse junction box of internal dimension 200 x 140 x 95mm made out of FRP sheet with weather proof canopy and locking screw fitted with and incl 6 Amps L&T MCB SP - 1 No, 20 Amps rated 4 Way connectors for 3 phase and neutral incoming/out going, mounted in the box, fixing on steel tubular /rail poles including necessary aluminium clamps, suitable glands, lugs and GI nut and bolts complete all as specified and as directed. Make : Sintex, Cat No: GSJB-2014 or techno-commercially equivalent in Hensel/OBO/Rittal

Supply, laying, connecting and testing of PVC insulated flexible multicore round copper conductor cable of size 3 core 1.5 Sqmm including necessary end connector fixed along with pole structure etc with all fixing & connecting accessories complete all as specified and as directed. Make: Havells, Cat No: WHMFDSKB31X5 or techno-commercially equivalent in Finolex/Polycab

Note for Item Sl Nos 2.00 to 7.00 (i) Design/ Drawing/ technical specifications of items is to be obtained from the OEM/ Auth Supplier & is to be got approved from the GE & Engr-in-Charge before placing final order to the OEM/ Auth Supplier. (ii) Techno Commercial comparative analysis is to be submitted to Engr-in-Charge for approval of make/ product wherever items other than the specified Cat/ Part/ Make ref is proposed to be incorporated by the Contractor. (iii) LM 79 & LM 80 test reports is to be submitted by the contractor for the LED light fittings.

Supply, fix and testing of control panel factory fabricated (CPRI type-tested) 6.0KW with MCB TPN 40 A, contactor TP 32 A-1 No, Digital Timer Control Panel, outdoor type including connected switch gears, cables, etc. and suitable sheet metal enclosure test and commisioning of Panel of 415V, out door(IP-54) cubical type with suitable provision of 25 x 25 x 3mm angular base and vertical frame along with necessary PCC foundation and locking arrangement complete all as specified and as directed. Make : Havells, Cat No : IHXTS03060 or techno-commercially equivalent in L&T/Legrand

Note:- The quoted rate shall be inclusive of the following:- (i) Suitable copper control wiring inside Panel boards, cable glands, cable lugs, supporting, insulators etc., (ii) Quoted rate is inclusive of angular base frame and PCC foundation Earth work and connected accessories. (iii) Design / drawing / BOM of the panel showing the dimensions is to be obtained from Manufacturer / Supplier & is to be got approved from the GE before placing final order to the manufacturer. (iv) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.

Supply, fix and testing of control panel factory fabricated (CPRI type-tested) 6.0KW with MCB SPN 40 A, contactor 32 A, Digital Timer Control Panel, outdoor type including connected switch gears, cables, etc. and suitable sheet metal enclosure test and commisioning of Panel of 240V, out door (IP-54) cubical type with suitable provision of 25 x 25 x 3mm angular base and vertical frame along with necessary PCC foundation and locking arrangement incl taking down old unsv one complete all as specified and as directed. Make : Havells, Cat No:IHXSS01060 or techno-commercially equivalent in L&T/Legrand

Note:- The quoted rate shall be inclusive of the following:- (i) Suitable copper control wiring inside Panel boards, cable glands, cable lugs, supporting, insulators etc., (ii) Quoted rate is inclusive of angular base frame and PCC foundation Earth work and connected accessories. (iii) Design / drawing / BOM of the panel showing the dimensions is to be obtained from Manufacturer / Supplier & is to be got approved from the GE before placing final order to the manufacturer. (v) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.

Supply, laying, connecting and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 core in trenches / through GI pipe / fixed along with pole structure etc with all fixing & connecting accessories complete all as specified and as directed. Make : Havells/Polycab/Gloster

Taking out old unserviceable LT UG cable, of any size/ type incl connected items like bricks, GI pipe etc complete all as specified and as directed.

Taking down old unserviceable street/ flood light fitting any type/ size complete all as specified and as directed.

Taking down old unserviceable street light junction boxes any type/ size complete all as specified and as directed.

Taking down old unserviceable connecting cables 2/3 core of size upto 2.5 Sqmm any type and connected items like PVC conduits etc complete all as specified and as directed.

Taking down old unserviceable street light control panel of any type/ size including making good the disturbed surfaces complete all as specified and as directed.

Supply, laying, connecting and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 Sqmm 4 core in trenches / through GI pipe / fixed along with pole structure etc with all fixing & connecting accessories complete all as specified and as directed. Make : Havells/Polycab/Gloster

Supply and laying light grade GI pipe (ISI Marked) of size 40 mm for cable protection to be fixed on wall /pole /road crossing with necessary clamps as per existing or in road crossing complete all as specified and as directed. Note :- Unit rate quoted is deemed to be inclusive of MS clamps if required to be fixed on pole/wall.

Supply and fixing medium grade PVC Conduit (ISI Marked) of size 20 mm for cable protection to be fixed on wall/ pole with necessary aluminium clamps in wall/ poles complete all as specified and as directed. Note :- Unit rate quoted rate is deemed to be inclusive of aluminium clamps if required to be fixed on pole/wall.

M & L for PCC (1:2:4) type B-1, (using 20mm graded stone aggregate) for coping of poles including necessary form work etc complete all as specified and as directed.

M & L for providing PCC (1:3:6) type C-1, (using 40mm graded stone aggregate) for cement concrete in foundations, filling and mass concrete including necessary form work etc complete all as specified and as directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25mtrs deep below ground level) with top edge of plate not less than 1.5mtrs below normal ground level, connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point on completion with and including 15mm bore medium grade GI protection pipe (upto 7.5mtr long) for earth and 20mm GI medium grade for watering including PCC chamber pit & cover with suitable lifting hooks, with funnel, wire mesh, common salt, charcoal filling, necessary excavation and earth work in any type of soil complete all as specified and as directed. Note: On testing after completion, if the desired earth resistance is not obtained the earthing shall be redone at no extra cost till the entire satisfaction of Engr-in-Charge.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5m depth for erection of poles, laying of cables etc and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling in, including spreading levelling, watering and well ramming in layers not exc 25 cm thick with excavated soil complete all as specified and as directed.

Removing excavated material (soil) to a distance n.exc 50 mtrs and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed.

Supply and laying well burnt old size sub class 'B' bricks of size 230mm x 115mm x 75mm bricks in trenches for cable protection of U/G cables with width equal to length of bricks complete all as specified and as directed.

M & L for providing sand cushioning for protection of UG cable in trenches with Coarse River Sand/ Riddled Earth of approved quality as approved in writing by GE including filling, spreading and punning down to desired thickness complete all as specified and as directed.

M & L for cutting the existing hard standing /PCC /WBM road at a depth not less than 45 cm and 25 cm in width for passing of cable through GI pipe, returning filling in, complete including finishing the surfaces by providing cement concrete (1:2:4) type B-2 (using 40mm graded stone aggregate) upto 20 cm depth, finishing to a uniform smooth surface to match the existing surface complete all as specified and as directed. Note : GI pipes shall be measured and paid separately.

rvelectricals

Sreekrupa Enterprises