COMPREHENSIVE B/R MAINTENANCE TO CERTAIN OTM AND MD ACCN OF 343 FD REGT AND 42 ADSR UNDER AGE B/R-II AT ITARANA CANTT ALWAR

Amount

Taking down chowkats or frames with shutters (without taking off shutters frome the frames) n exc 1.5 but each etc complete all as specified & directed.

Taking down chowkhat with shutter without taking off shutte from the frame exc 1.5 Sqm and not exc 4 Sqm each etc complete all as specified & directed.

Taking down shutter of any exc 01 sqm but n exc 2 sqm each and removing from site etc complete all as specified & directed.

M&L for mild steel framed work as in door frames and gauge shutters made of angle or hallow/square/rectangular/circular section and other covering door to be prepared for handing or sliding with including either hooks and hinges or steel hanging door fittings purposely made sliding door bolt , hinges or handles fittings (exclusIve of steel or other covering, running rails and guides) and hanging also fastening and fixing , necessary arrangements for fixing of wiremesh, necessary bolting including welding comlete conforming to FE-290 Gde E-165. Note:Wire gauge will be measured and paid separately

S&F 35 mm thick factory made plain framed, panelled shutter of 2nd class hard wood (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneeringon both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specifed and directed.

S&F factory made 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and directed.

M&L for factory made 30mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats etc complete all as specifed and directed.

S&F anodized aluminium frame and other sections for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F anodized aluminium door ,window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) etc. complete all as specified and directed.

S&F glavanised mild wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples to wooden frames with beading etc complete all as specified & directed.

Supply and fixing 5.5mm thick sheet glass ordinary quality and glazing with beading and rubber gasket in square exc 0.5 sqm in each pane etc. complete all as specified and directed.

S&F powder coated aluminium anodised grill with minimum anodic coating of grade AC 15 of approved design /pattern with approved standard section and fixed to the windows frame with CP brass/stainless steel screws @ 200mm C/C and U channel where required including cutting the grill in proper size for fixing and operation of handles etc complete all as specified and directed

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing

S&F Butt hinges 100mm type B-21 extruded aluminum alloy with galavanisied mild steel hing pin, anodised and fixed etc complete all as specified and directed

S&F Aluminum anodised, barrel tower bolts of extruded section and fixed length of bolt 150 mm etc complete all as specified and directed

S&F in repair aluminium anodised, barrel tower bolts 300mm long extruded section and fixed etc complete all as specified and directed

S&F extruded aluminium alloy handles 125mm size fabricated type anodized ISI marked.etc complete all as specified and directed

S&F in repair extruded aluminium alloy handles 125mm size fabricated type anodized etc complete all as specified and directed.

S&F retractable door hinge including all the necessary screws and welding for fixing and including all the activities to make the door workable etc complete all as specified and directed.

S&F Aluminium alloy anodised sliding door bolt with hasp,staple (bolt type) 300mm long and fixing clips of sheet,cast or extruded sections and fixings bolts and sliding bolt of extruded section or cast-aluminium alloy and fixed etc complete all as specified and directed.

S&F in repair Aluminium sliding door bolt with hasp,staple (bolt type) 300mm long and fixing clips of sheet,cast or extruded sections and fixings bolts and sliding bolt of extruded section or cast-aluminium alloy and fixed etc complete all as specified and directed.

S&F 150mm floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor etc complete all as specified and directed.

S&F in repair 150mm floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor etc complete all as specified and directed.

S&F in repair 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,with vulcanised rubber piece.fixed in floor etc complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of pink primer etc complete all as specified and directed.

S&F in repair Stainless Steel drapery rod of 25 mm inner dia (in length as directed ) with & including decorative finial at both ends and pair of powder stainless steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beams including PVC curtain rings of matching colour @10 cm c/c etc complete all as specified and directed.

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges in large patches as in roof covering etc complete all as specified and as directed.

S&F in Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws etc complete all as specified and as directed.

S&F in Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws etc complete all as specified and as directed.

S&F in repair vitreous china squatting pan of Orrisa pattern size 580mmx440mm white with integral foot rest including P trap (excluding flushing cistern and flush pipe complete incluidng provision of lime concrete bedding fixed etc complete all as specified and as directed.

S&F in repair vitreous china wash down water closet (Pedastal pattern) 'white (excluding flushing cistern and flush pipe incuding seat cover and Jet) including connection to drain or out going pipe and to flushing pipe anti syphonage pipe and making good to floor etc complete all as specified and directed.

S&F in repair PVC flushing cistern low level 10 ltr capacity with inlet ball valve float and handle syphonic action type including brackets and flush pipe of polythene of low or high density etc complete all as specified and as directed.

S&F in repair 15 mm dia steel tubing medium grade 'galvanised' with and including all fitting and fixed to walls and ceiling or laid in floor including taking out old unserviceable steel tubing etc complete all as specified and as directed.

S&F in repair 20 mm dia steel tubing medium grade 'galvanised' with and including all fitting and fixed to walls and ceiling or laid in floor including taking out old unserviceable steel tubing etc complete all as specified and as directed.

S&F in repair 15mm dia stop valve/angle valve of copper alloy fancy type chromium plated screwed down high pressure with crutch or butter fly handle screwed on both ends for iron pipe or for union fixed etc complete all as specified and as directed.

S&F in repair 15 mm bore fancy type long body bib tap, half turn, with wall flange, cast copper alloy with capstan heads, chromium plated, screwed for iron pipe or for brass ferrule, etc complete all as specified and as directed.

S&F in repair brass CP mixer for Sink (swan neck patern) for mixing hot & cold water screwed down for iron pipe and fixed etc complete all as specified and as directed.

S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or incluidng fixing contilever brackets and connecting union to pipe over all size 495mmx420mm bowl size 410mmx330mmx160mm.etc complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or incluidng fixing contilever brackets and connecting union to pipe over all SIze 915mmx460mm bowl size 410mmx330mmx160mm.etc complete all as specified and as directed.

S&F in repair tuffened corner acrylic shelf 6mm thick with brass chromium plated guard and fixing arrangements etc complete all as specified and as directed.

S&F in repair health fusset chromium plated suitable for 15 mm bore pipe including 1 M long PVC tubes for EWC etc complete all as specified and as directed.

S&F in repair 15mm bore two way Angle valve chromium plated screwed plated screwed down,high pressure with capstan heads screwed both ends for iron pipe or for union.etc complete all as specified and as directed.

S&F in repair Brass CP wall mixer 3 in 1 with L-Bend mixing hot & cold water screwed down for iron pipe and fixed etc complete all as specified and as directed.

S& F in repair vitreous china urinal half stall type white (excluding flushing cistern) , but including CP urinal spreader and waste pipe etc complete all as specified and as directed.

S&F in repair 32mm bore dia of discharge pipe Waste coupling of PTMT (half or full threaded) (Minimum weight 40mm-60 gms)

S&F in repair 32mm bore dia of discharge pipe Waste coupling of PTMT (half or full threaded)but suitable for urinals, (Minimum weight 32mm-45gms

S&F in repair vitreous china WHB flat back of SIze 580x450mm excluding taps waste chain plug stopper but incl brackets incl waste pipe cutting pinning in ends of brackets etc complete all as specified and as directed.

S&F in repair swivel shower rose(fancy type) chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union etc complete all as specified and as directed.

S&F in repair 15mm dia bore cast copper alloy chromium plated fancy type pillar tap for with out cold & hot water etc complete all as specified and as directed.

S& F 1000 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including 20mm float valve, 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600 mm long with fitting and including dismantling of tank etc complete all as specified and as directed by the Engineer-In- Charge.

S& F 500 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including 20mm float valve, 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600 mm long with fitting and including dismantling of tank etc complete all as specified and as directed by the Engineer-In- Charge.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm.etc complete all as specified and as directed.

S&F in repair Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges etc complete all as specified and as directed.

S&F in repair PVC (SWR) pipes of 75 mm bore single socketed in any length with rubber ring joints laid in trenches or in floors etc complete all as specified and as directed.

S&F in repair PVC (SWR) pipes of 110 mm bore single socketed in any length with rubber ring joints fixed to wall etc complete all as specified and as directed.

S&F in repair PVC (SWR) floor trap, plain with grating including joining with solvent cement 75 mm dia.etc complete all as specified and as directed.

S&F in repair PVC (SWR) bend 75mm bore of any radius etc complete all as specified and as directed.

S&F in repair PVC (SWR) bend 110 mm bore of any radius etc complete all as specified and as directed.

S&F in repair PVC (SWR)110mm Branch piece (single Y ) equal or unequal etc complete all as specified and as directed.

S&F in repair 110mm size of PVC(SWR) Vent Cowl etc complete all as specified and as directed.

S&F in repair Soap dish any type fixed to plugs with of chromium plated brass screws etc complete all as specified and as directed.

Taking down cement or cement lime plaster, of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

M&L 15mm thick rendering on external surface in CM (1:4) mixed with WPC 3% by weight of cement including finishing even and smooth without using extra cement etc complete all as specified and as directed.

Supply only water profing compound etc complete all as specified and as directed.

M&L for 15mm thick rendering in CM (1:6) on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed.

M&L for rendering 5 mm thick in CM (1:3) as in ceiling and finished even and smooth without using extra cement.etc complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed.

M&L for Vitrified tiles(dark shade / double charged / ultra charged ) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm as on vertical surfaces over 10 mm rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed.

M&L for Vitrified tiles(dark shade / double charged / ultra charged ) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm as in floors etc. laid over and including 15 mm screed bed or bedding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed.

M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc.laid over and including 15 mm screed bed or bedding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed.

M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but n exc 0.18 in floors etc. laid over 15 mm screed bed or bedding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed.

M&L for Glazed coloured ceramic tiles in vertical surface 300x450x7 / 450x350x7mm thick over 10 mm rendering in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or discription) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones etc complete all as specified and directed.

S&F in repair 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane etc complete all as specified and directed.

S&F in repair steel peg stay for steel/aluminium ventilator and window (a metal bar with holes that fit on to the peg and allow the sash window to be held open in various position) etc complete all as specified and directed.

S&F in repair black plastic over head tank cover for 500/1000 Ltr capacity weight of cover not less than 900gms and shape of cover should be round and diameter will be 490mm etc complete all as specified and directed.

S&F in repair 18-19mm Prelaminated particle board, exterior grade put together prelaminated both sides with decorative choice lamination fixed with screws to timber frame work work/hinges as in cupboard shutters for book shelf showcase etc & including necessary fittings and fixtures like Aluminium 19mm wide & 6mm thick Teak wood beading / edging / lipping fixed with nails to particle board fixed etc complete all as specified & directed.

S&F in repair magic eye bosney safety door viewer 2 inch 180-degree suitable for door for see into the door all as specified and directed by Engr-in-Charge

S & F in repair buffer door closer (Door stopper) suitable for skelton/pannel/flush door etc complete all as specified and directed.

Disconnecting & dewatering of PVC over head tank, scrubbing the inner suraces, cleaning & removing all scales, dirt etc from mouth of circulating pipes, washing the tanks with fresh water and disinfecting the same by flushing with liquid chlorine or any other equivalent chemical, reconnecting & refixing in position after cleaning for tank capacity 500/1000 Ltrs including marking with white paint and stencil etc complete all as specified and directed. Note: (i) Cleaning shall be doen through wash out pipe by marking suitable arrangement to teh outlet pipe such as cutting of the pipe providing short piece of pipe fitting and union coupling etc where washout pipe are not existing. The dirt shall not be allowed to enter the water supply system. (ii) The quoted rates are deemed to include items incorporates use of any material for completing above task to the satisfaction of Engr-in-Charge.

M&L for coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M40 grade and grey cement and pigment for berms including 75 mm thick PCC (1:4:8) D2 type and 25 mm thick layer of sand etc complete all as specified and directed

M&L preparation of newly plasterd surface of wall and applying two coats cement base paint over a coat of primer etc complete all as specified and directed.

M&L for preparing newly plastered surfaces & applying three coat of white wash on ceiling.etc complete all as specified and directed.

M&L for preparation of new plastered surfaces & providing two coats of distemper oil emulsion over a coat of primer etc complete all as specified and directed.

M&L for brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying one coat of oil bound distemper of approved shade/tint .etc complete all as specified and directed.

M&L for preparation of old treated surfaces of walls, plastered or unplastered and applying one coat of cement base paint of approved shade/tint. etc complete all as specified and directed.

Dismentling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc complete all as specified and directed.

M&L for false ceiling with Armgyp-FB ceiling tiles of size 595 x 595mm, 9mm thick (as approved by GE) fixed with and including galvanized iron powder coated inverted 'Tee' or 'L' section (concealed GI frame work) suspended from ceiling with provision of galvanized wire 4 mm dia and wall taping screw including butterfly clips, hold down clips for fixing the board to frame complete all as per manufacturer’s instructions, etc complete all as specified and directed. (a) Size of grid - 610 x 610 mm. (b) Size of main Tee – 39 x 24.70 x 0.80 mm. (c) Size of cross Tee – 39 x 24.70 x 0.80 mm. (d) Size of wall angle – 22.20 x 22.20 x 0.65 mm.

S&F in repair Alumninium (extruded ) body Door closer hydraulically regulated, designation No. 2,universal type, suitable for door shutters of 701 o 850 mm in width and of weight between 36 to 60 kg and fixed etc complete all as specified and directed.

S & F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specified and directed.

M&L for taking down and refixing aluminium window/door shutter nexc 2.5 sqm each in the same opening after repair/replacement/changing defected/unservicable of anodised aluminium section, handle, locking device, roller including necessary joining cleats glazing clips, rubber neaprene packing, anodised aluminium snap beading screws etc complete all as specified and directed. Note :- (i) The rate quoted under this item deemed included for necessary jointing cleates, glazing clips, alluminium beading, screws, rubber packing, locking device, in built handles, roller for sliding windows etc & fitting of old glass. However, no element on account of weight will be taken into consideration for item. (ii) Section of aluminium for repair/replacement shall be provided as per existing paid separatly and Glass, wire mess will be paid separatly.

S&F solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame, etc complete all as specified and directed.

S & F for Pipe Supporting Clamping - Single Pipe of dia 4" (110 mm) down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt R/M System running vertically with wall distance 3": Pipe Support Clamping made of 1. Profile Bracket having Wall Distance 3" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted "C" Channel with ribs to be used of size 10" made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel (IS 1079 DD) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 3" - 2 Nos. 2. Continuous Slotted C Channel of Size 10" - 1 No.; 3. U Bolt R/M for 4" (110 mm) CI or PVC Pipe Dia. - 1 No.; and 4. Justi Khilla 2 1/2" Zn coated - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing No. : CE Jaipur Zone - Jaipur; TD/2022/102. Make: Shaivi or equivalent as approved by GE.

S & F for Pipe Supporting Clamping - Single Pipe of dia 3" (75 mm) down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt R/M System running vertically with wall distance 3": Pipe Support Clamping made of 1. Profile Bracket having Wall Distance 3" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted "C" Channel with ribs to be used of size 10" made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel (IS 1079 DD) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 3" - 2 Nos. 2. Continuous Slotted C Channel of Size 10" - 1 No.; 3. U Bolt R/M for 3" (75 mm) CI or PVC Pipe Dia. - 1 No.; and 4. Justi Khilla 2 1/2" Zn coated - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing No. : CE Jaipur Zone - Jaipur; TD/2022/102. Make: Shaivi or equivalent as approved by GE.

S & F for Pipe Supporting Clamping - Single Pipe of dia 3/4" (20 mm) down take pipeline fixing done with Clamping System consists of Mono Bracket + U Bolt R/M system running vertically with wall distance 3": Pipe Support Clamping made of 1. Mono Bracket for 3/4" (20 mm) pipe having Wall Distance 3" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 48 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs. 2. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit: 1. Mono Bracket for 3/4" pipe, Wall distance 3" - 1 Nos. 2. U Bolt R/M for 3/4" (20 mm) GI / UPVC/ CPVC pipe Dia. - 1 nos and 3. Justi Khilla 2 1/2" - 2 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing no. : CE Jaipur Zone - Jaipur; TD/2022/102. Make : Shaivi or equivalent as approved by GE.

S & F for Pipe Supporting Clamping - Single Pipe of dia 1/2" (15 mm) down take pipeline fixing done with Clamping System consists of Mono Bracket + U Bolt R/M system running vertically with wall distance 3": Pipe Support Clamping made of 1. Mono Bracket for 1/2" (15 mm) pipe having Wall Distance 3" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 48 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs. 2. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit: 1. Mono Bracket for 1/2" pipe, Wall distance 3" - 1 Nos. 2. U Bolt R/M for 1/2" (15 mm) GI / UPVC / CPVC pipe Dia. - 1 nos and 3. Justi Khilla 2 1/2" - 2 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing no. : CE Jaipur Zone - Jaipur; TD/2022/102. Make : Shaivi or equivalent as approved by GE.

AARSINFRATECH (BID ID -3094070)

M/s ASK Enterprises (BID ID -3086560)

M/S JINDAL ENTERPRISES (BID ID -3086861)

shiva construction (BID ID -3081412)

J.J.ENGINEERING (BID ID -3087743)

vandana enterprises (BID ID -3085962)

Radha Enterprises (BID ID -3082575)