PROVN OF 03 X GARBAGE PIT NEAR PUF SH NO 60, PUF SH NO 40, PUF SH NO 36 AND OTHER SANCTIONED WORKS AT PMS IN THE AREA OF AGE B/R-I UNDER GE PANAGARH

Amount

Excavating over areas, n exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m deep for foundation etc or for shafts n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

All as per item No 2.00 mentioned here-in-above but exc 1.5 m depth beyond the first 1.5 m complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and directed.

M&L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Cement concrete (1:4:8) Type D2 (using 40 mm graded stone aggregates) as in foundations, filling and mass-concrete complete all as specified and directed.

M&L for PCC (1:3:6) 75 mm thick Type C2 (using 40 mm graded stone aggregate) used as in plinth protections/paving/sub base and finishing cement concrete surface even and fair without using extra cement complete all as specified and directed.

M&L for PCC (1:3:6) 100 mm thick Type C2 (using 40 mm graded stone aggregate) used as in sub base of flooring complete all as specified and directed.

M&L for 75 mm thick Type C2 PCC (1:2:4) (using 40 mm graded stone aggregate) used as in flooring finished even and smooth without using extra cement complete all as specified and directed.

S&F framed work as in doors or gates of angle Fe 410-W (Gde-E- 250)quality-A Fe or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for preparation of steel surfaces of any description, priming with red oxide primer and painting with synthetic enamel paint n exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed.

M&L for Brickwork with modular flyash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces of wall, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new surfaces of walls plastered and white washing with 03 coats of white wash on walls complete all as specified and directed.

Removing excavated spoil to a distance not exc.50m and depositing where directed at a level not exc. 1.5 m above the starting point in soft/loose soil complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for brickwork with fly ash bricks straight or curved on plan to any radius built in CM (1:6) complete all as specified and directed.

M&L for brickwork with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:6) complete all as specified and directed

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc complete all as directed.

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in columns, pillars, piers, etc complete all as specified and directed.

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter for rough finished surfaces of conrete complete all as specified and directed.

M&L for formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions for rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for rough finished surface, not exceeding 200m thick (Horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 26.00 mentioned here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete wall surface finishing the surfaces fair and even complete all as specified and directed.

M&L rendering 20 mm thick cement plaster in CM (1:6) on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) incl WPC complete all as specified and directed. (Note: WPC will be measured and paid separately).

M&L for rendering 5 mm thick in CM (1:6) on fair faces of brick work or concrete wall surfaceS&Finishing the surfaces fair and even on ceiling complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance complete all as specified and directed.

M&L for preparation new plastered surfaces and applying three coat of white washing on ceiling complete all as specified and directed

M&L for 100 mm thick PCC type C-2, 1:3:6 (using 40 mm graded stone aggregate) finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in floor for receiving screed bed complete all as specified and directed

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles over 10 mm thick plaster in CM (1:3) complete all as specified and directed. (Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE)

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing complete all as specified and directed.

S&F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F anodised powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 as in bed blocks for hold fast including necesssary formwork complete all as specified and directed.

S&F mild steel flat iron as in hold fast, clamps articles conforming to FE 290 Gde-E-165 complete all as specified and directed.

S&F 100 mm size stainless steel butt hinges extruded aluminium alloy with galavanised mild steel hing pin anodised and fixed type C-21 complete all as specified and directed

S&F 200 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed.

S&F aluminium handles, cast type, anodised 150mm long complete all as specified and directed.

S&F 200 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed complete all as specified and directed.

S&F for 15 mm dia medium grade galvanised steel water tubing,with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

All as per item No 48.00 mentioned here-in-above but 20 mm dia complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) etc complete all as specified and directed.

Supply & fix 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets complete all as specified and directed (Fixing rate included in Ser item No 42 above of WC item).

S&F vitreous china wash basin, white , flat back , size 550 x400mm (for hospital use) excluding taps, waste, chain and plug and porcelain stopper but including brackets any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F in 15 mm bore stop valve cast copper alloy screwed down, high pressure, with crutch or but-ter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 15mm dia bib tap cast copper alloy chromium plated fancy type, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15 mm pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

Supply & fix flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed

S&F PVC connection 15 mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F 20mm bore for gun metal glove or gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and directed

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F soap dish, vitreous china white, approximate size 160 x 160 x 90mm complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm dia of outlet plain with grating including jointing with solvent cement complete all as specified and directed

S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed.

S&F Urinal Spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and directed

S&F Vitreous China squatting urinal pan including connecting to pipe complete all as specified and as directed.

M&L for Salt -glazed stoneware drain pipes of 150 mm internal dia laid in trenches and jointed complete all as specified and directed.

M&L for concrete bed to 150 mm dia drain pipes including packing under, haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required as required in 150 mm diameter complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigments complete all as specified and directed.

M&L for PCC (1:2:4) Type B0 (using 12.50 mm graded stone aggregate) used as in copings complete all as specified and directed.

Supply, Laying and Testing of Reinforced concrete pipes class NP2 , laid and jointed complete with collars 150mm bore complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in bed to drain pipes including forming cradels for 150 mm bore pipes complete all as specified and directed

M&L for 75mm thick plain cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed

M&L for 100mm thick plain cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) as in floor complete all as specified and directed

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete, all as specified and directed.

Excavating in post holes not exc 0.5 cum, in soft soil and getting out , returning , filling in and ramming earth in layers not exc 25 cm, watering and removing surplus soil to a distance not exc 50 m and making good surfaces all as required complete all as specified and directed.

S&F mild steel wk as in Post, plate, framed roof trusses, purlins, rails and fristing incl distances pieces, cleats etc conforming to Fe 410 - O or Fe 310 - O complete all as specified and directed.

S&F 0.50 mm thick Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

M&L for two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation of surfaces over 10 cm width or girth complete all as specified and directed.

Returning, filling in and including spreading, leveling, watering & well ramming in layers n.exceeding 25 cm in soft/loose soil complete all as specified and directed.

Dismantling old/rusted Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings with ridges etc complete as specified and directed.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame n exc 1.5 Sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 Sqm & n. exe 4 Sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.

S&F providing and fixing factory made UPVC white colour Sliding window of area n. exc. 2 Sqm each with Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.

M&L for plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in 2nd class Hardwood complete all as specified and directed.

Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge.

S&F anodised powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

Hacking Out Old Broken Glass (any thickness, size, quality or description) from Wooden Frames, Glazed with Putty or fixed with Beads, complete all as specified and directed.

S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm each panes complete all as specified.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premises as directed.

M&L for 15 mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles complete all as specified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)

M&L for preparation of old wall surfaces complete removal existing finishes including filling of small holes etc and applying two coat of oil bound distemper over a coat of alkali resistant priming paint over one coat of putty minimum 3 mm thick complete all as specified and directed.

M&L for finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) after preparation of old wall surfaces with complete removal of existing finishes complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)

Dismantling 6mm thk Asbestos cement plain building boards from ceiling including cover fillets complete all as specified and directed.

S&F for anodised aluminium snap grid frame work size of grid 605 x 605 mm for false ceiling all as specified.

S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified.

S&F 12 mm thick perforated particle board/ tiles for insulation and acoustic purposes 60 X 60 cm in size, fixed with nails to timber frame work or with staples on snap grid (frame work for ceiling shall be measured and paid separately ) all as specified and directed.

S&F PVC (SWR) P trap 110/110 mm bore complete all as specified and directed.

S&F vitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests,any pattern (excluding flushing cistern and flush pipe) complete all as specified and directed.

S& F Vitreus China bowl urinal flat back Size of 465 x 355 x 265 mm white with grating and union for discharge pipe complete all as specified and directed.

S&F in repair flush pipe of chromium plated brass tube, 32mm dia, for low level cisterns complete all as specified and directed.

S&F in repair soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed.

S&F in repair vitreous counter sunk wash basin white,flat back of size 580x 450mm including 32mm dia PVC waste pipe CP brass waste coupling 32 mm dia , pair of MS angle brackets or MS fastener/ bolts for fixing arrangements 450mm long pvc connection with PVC nut and washer complete at site and all as directed by Engr-in- charge.

S&F in repair pillar tap 15 mm dia cast copper alloy fancy type with capstan heads chromium pleted screwed down high pressure with or without lettered Hot or Cold with long screwed screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.

S&F in repair tubular towel rail /towel ring 20mm dia D type and 60cm long between flanges of brass chromium plated complete all as specified and directed.

S&F in repair Grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

S&F PVC (SWR) WC connector with lip ring 110 mm all as specified.

S&F PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and directed

S&F aluminium anodised barrel tower bolts 200 mm long, of extuded section and fixed stove enamelled black with bright bolt complete all as specified and directed.

S& F aluminium alloy anodied sliding door bolt size 250mm with hasp staple (bolt type ) and fifing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extrueded section or cast aluminium alloy and fixed complete all as specified and directed

S&F 125 mm aluminium handle cast type anodized complete all as specified and directed

S&F butt hinges of size 100 mm for doors complete all as specified and directed

Supply, Laying and Testing of Reinforced concrete pipes class NP2 , laid and jointed complete with collars 150mm bore complete all as specified and directed.

M&L for plain Cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) in surface channels and drains complete all as specified and directed.

M&L for plain cement concrete type B0, 1:2:4( using 12.5mm graded stone aggregate) as in benching, bed block, coping of manhole and drain brcik wall complete all as specified.

M&L for 15mm thick rendering in cement mortar (1:4) inside and outside brick wall of manhole /septic tank /concrete surfaces even and smooth with out using extra cement complete all as specified and directed.

M&L for concrete bed to 150 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 (using 40mm graded stone aggregate) all as specified and directed.

Supplying and laying UPVC Eco drain Hi-tech pipe drainage sewer system pipe bearing 160 mm dia minimum 4mm thick incluing jointing with coupler, bend tee as per site requirement complete laid in trenches or floors complete all as specified and directed. (Note: Necessary PCC haunching/benching/ packing shall be measured and paid separately).

Cleaning of existing manhole of any size of depth of manhole exc 3.00 but not exc 4.50 m by bailing out water/sewage by mechnicla pump including mouth of sewage line and removing sludge/debris to a distance n. exc 50 and urried in the ground, complete all as specified and directed.

M&L for LLDPE Septic Tank of 25 User conventional type designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc complete all as specified and directed.

Surface dressing n exc 15 cm deep in soft /loose soil complete all as specified and directed

M&L for 40 mm thick Damp proof course in cement concrete type B-0, 1:2:4 to horizontal or vertical surfaces including necessary formwork complete all as specified and directed

M&L for rendering 5mm thick in cement mortar (1:3) on fair faces of concrete surfaces finished even and smooth without using exxtra cement complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed

M&L for 3mm thick plain sheet glass ordinary quality & glazing with oil putty n.exc 0.50 Sqm in each pane complete all as specified and directed by Engr-In-Charge .

M&L for 100mm thick Plain Cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base floor complete all as specified and directed.

M&L for 40mm Plain Cement concrete type B-1,1:2:4 (using 20mm graded stone aggregate) is in flooring complete all as specified and directed

E/M PORTION M&L point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes suitable for modular box fitted with modular front plates dia 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

S&F switch modular type 6 Amp one way, one module, single phase, complete all as specified and directed by Engineer-in-charge.

Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

S&F exhaust ventilation fan with louvers of sweep 300mm, metalic body, 240 volts, BEE 5 star rated, ISI marked complete all as directed by Engr-in-Charge.

Supply & fixed 01x 20 W LED slim line light fittings with 6500K, lighting fixture with extruded polycarbonate complete with all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete, complete all as directed.

S&F 9 W LED light fitting wall mounted batten 2ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 9 watt , 6000K including necessary connection complete all as specified and directed.

S&F security light fittings 25 watts, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed.

S&F epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F MCB SPN 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply, laying / fixing / connecting, testing and commissioning of LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) all as directed by the Engr-in-Charge for the following ratings (Note:- (i) Earth work in excavation, sand cushioning, cable cover, cable protection, GI pipe shall be measured and paid separately under relevant item. (ii) Cable Route Indicator made of metal of height 300mm above GL duly written ''LT CABLE'' to be fixed on every 30 mtr distance with pcc (1:3:6), 150 mm below the GL ,cost of indicator and pcc to be considered in this item rate). (a) 10 Sqmm x 2.0 core

Excavation in trenches not exceeding 1.5m wide and not exc. 1.5m depth and getting out in hard/dense soil complete all as specified and directed.

Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and directed. (Note : Punned thickness shall be measured).

M&L for sub class B bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and directed.

M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. (Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department).

ANIMA ENTERPRISE

Jaibalaji Enterprise

M/S N B SEN CONSTURCTION

UNITED BUILDERS

MS kesh and co

M/s. Kalpana Construction

KAZI SAHABUL ALAM