BARC/TSD/22/2023-24

Amount

Deployment and operation of 4 wheeler Vehical with 5 seater with back side provision of transporting/shifting material with driver as per caluse no 1 of specifications

Deployment of above said Vehicle

Operation of above said vehicle

Preventive & break down maintenance of 630A, 500 V PCC Panels as per clause no.2 of specifications

Preventive & break down maintenance of 400A, 500 V PCC/MCC Panels as per clause no. 3 of specifications

Preventive & break down maintenance of 250 to 160A, 500 V PCC/MCC Panels as per clause no. 4 of specifications

Preventive & break down maintenance of Skeleton Panels as per clause no. 5 of specifications

Preventive & break down maintenance of Rising mains from first floor to eighth floor at C.C. building as per clause no. 6 of specifications

Preventive & break down maintenance of Lecture hall lighting distribution panel & control panel at new computing centre as clause no. 7 of specifications.

Preventive & break down maintenance of 125A, 500 V PCC/MCC Panels as per clause no. 8 of specifications

Preventive & break down maintenance of 250A, 500 V Emergency Panels as per clause no. 9 of specifications

Preventive & break down maintenance of 3 phase VTPN / HTPN, I/C MCCB/MCB DBs and O/G MCBs, 12 / 8/ 6/ 4 way lighting & power distribution boards as per clause no.11 of specifications..

Preventive & break down maintenance of Single phase MCB DBs 12, 8, 6 way lighting & power distribution boards as per clause no.12 of specifications..

Preventive & break down maintenance of push button station with 6 to 10 sets of ON/OFF push buttons and indication lamps as per clause no.13 of specifications.

Preventive & break down maintenance of push button station with 1 to 4 sets of ON/OFF push buttons and indication lamps as per clause no.14 of specifications.

Preventive & break down maintenance of push button station with Clean bench starter points as per clause no.15 of specifications.

Attending failure -replacing defective fixture of various types of LED lighting fixtures/flame proof fixtures as per clause no.16 of specifications.

Attending failure -replacing capacirtors of pedastal/ wall mounted fans including cleaning of various types as per clause no.17 of specifications.

Functional checking and cleaning of following Atco make dimmable ballast with M/s. Tulip make 1 x 36-watt strip lights as per clause no.18 of specifications.

Functional checking and cleaning of following Atco make dimmable ballast with M/s. Tulip make Up lights and down lights as per clause no.19 of specifications.

Functional checking and cleaning of following Atco make dimmable ballast with M/s. Tulip make Centre light with 4 x 36 watt PL-L lamp fixture as per clause no.20 of specifications.

Functional checking and cleaning of following Security lighting type TEMPO LED 240W HP lamp fixtures at SCF as per clause no.21 of specifications.

Functional checking and cleaning of Security lighting type BRP 020W with high power 22 W LED fixtures at SCF as per clause no.22 of specifications.

Preventive and break down maintenance of 1400mm/1200mm sweep ceiling fan as per clause no.23 of specifications.

Preventive and break down maintenance of Single phase exhaust fan 300mm / 600mm sweep as per clause no.24 of specifications.

Preventive maintenance of socket outlets of 20A metal clad sockets with 20A MCB A/C power points as per clause no.25 of specifications.

Preventive maintenance of socket outlets of 63A/32A three phase 3/5 pin socket & TPN MCB power points as per clause no26 of specifications.

Preventive maintenance of socket outlets of 16 A Flameproof isolator in FRP box (2 Isolators each)as per clause no 27 of specifications.

Maintenance and testing ,report submission of earthing stations as per clause no.28 of specifications.

Repairing of plate/ pipe earthing stations chambers as per clause no.29 of specifications.

Supply, installation, testing and commissioning of 300 mm sweep heavy duty exhaust fan as per clause no.31of specifications.

Supply, installation, testing and commissioning of 400 mm sweep BLDC wall mounted fan as per clause no.32 of specifications.

Supply, installation, testing and commissioning of 300 mm sweep exhaust fan with squire plastic body as per clause no.33 of specifications.

Supply, installation, testing and commissioning of 400 mm (18" inch) sweep BLDC pedestal fan as per clause no.34 of specifications.

Supply, installation, testing and commissioning of 1200 mm BLDC ceilling fanas per clause no.35 of specifications

Supply, retrofitting, testing and commissioning of LED Tube 1200 mm suitable for replacing existing type HO VWV 28 W 865 T8 Lighting fixtures as per clause no. 36 of specification

Supply, installation, testing and commissioning of LED Lighting fixtures suitable for replacing existing defective fixture type RC 600 BM LED 40SW 30L 120 PSU Power balance 6500K at 7th fl. as per clause No. 37 of specification

Supply, installation, testing and commissioning of LED Lighting fixtures suitable for replacing existing type TMC 501 P 2 X T LED 22 P3242 as per clause No. 38 of specification, for (MASCOT Service BLDG.)

Supply, installation, testing and commissioning of LED Lighting fixtures suitable for replacing existing type of BN308C LED20S-6500 L120 PSU WH as per clause No. 39 of specification.

Supply, installation, testing and commissioning of LED Lighting fixtures suitable for replacing existing type RC383B LED 36S-6500 PSU OD WH PIR, 6500K/4000K as per clause No. 40 of specification.

Supply, installation, testing and commissioning of LED Lighting fixtures suitable for replacing existing type Tulip make MOON LIGHT 3L LDC3123 20 6500K/4000K as per clause No. 41 of specification

Supply, installation, testing and commissioning of LED Lighting fixtures suitable for replacing existing typeTulip makeMOON LIGHT 2L LDC3122 12 6500K/4000K as per clause No. 42 of specification

Supply, installation, testing and commissioning of LED Lighting fixtures suitable for replacing existing type phillips make bulkhead WT202W LED6S NW PSU S2 PC as per clause No. 43 of specification

Supply, installation, testing and commissioning of LED Lighting fixtures suitable for replacing existing type phillips make IP 65 WT201C LED44S-4000 PSU L120 as per clause No. 44 of specification.

Supply, installation, testing and commissioning of LED Lighting fixtures suitable for replacing existing type phillips make LED PL-L 18W, 6500K 2G11 as per clause No. 45 of specification

Supply, installation, testing and commissioning of LED Lighting fixtures suitable for replacing existing type Tulip make Alcon Eco 1 LDR0090 08 4000K/6500K as per clause No. 46 of specification,

Supply, installation, testing and commissioning of LED Lighting fixtures suitable for replacing existing type Tulip make Alcon Eco 3 LDR0092 18 4000K as per clause No. 47 of specification,

Supply, installation, testing and commissioning of LED Lighting fixtures suitable for replacing existing type Tulip make Ultraslim mirror light 2 ,LDW191109 , 5700K/9w as per clause No. 48 of specification,

Supply, installation, testing and commissioning of LED Lighting fixtures suitable for replacing existing type phillips make Mas LEDtube 30W, 4000lm, 865 T8 with Batten as per clause No. 49 of specification,

Supply, installation, testing and commissioning of LED strip Lighting in IP 65 protective enclosure for our door use fixture shall be used for replacing FH19WP5G1 of Tulip as per clause No. 50 of specification.

Supply, installation, testing, and commissioning of Day light Sensor suitable for replacing type LRM 1071 Occupancy Sensor as per clause no.51 of specifications

Point wiring for lighting fixtures as per clause no.52 of specifications(Primary points).

Point wiring for lighting fixtures as per clause no.53 of specifications(Secondary points).

Primary Point wiring for power points for 4 nos 15A switches & 4 nos 15 A sockets along with 4 nos 15A tops with suitable (12 Module) M.S. box, surface/recessed type as per clause no 54 of specifications

Primary Point wiring for power points for 2 nos 5A switches & 5 A sockets and 2 no.15A switch & 2 no. 15 A socket, along with 4 nos of 6 amp top with suitable ( 12 Module) M.S. box, surface/recessed type as per clause no 55 of specifications

Primary Point wiring for power points for 1 nos 15A switches &2 nos 5 A sockets and 1 no.15A switch & 1 no. 15 A socket , with suitable ( 8 Module) M.S. box, surface/recessed type as per clause no 56 of specifications

Primary Point wiring for power points for A/c power points(20A DP MCB with 20A metal clad socket and top with suitable M.S. box) as per clause no. 57 of specifications

Secondary Point wiring for power points for 2 nos 5A switches & 5 A sockets and 2 no.15A switch & 2 no. 15 A socket, along with 4 nos of 6 amp top with suitable ( 12 Module) M.S. box, surface/recessed type as per clause no 58 of specifications

Secondary point wiring for power points for 1 nos 5A switches & 5 A socket and 1 no.15A switch & 1 no. 15 A socket,and blank plate with suitable ( 8 Module) M.S. box, surface/recessed type as per clause no 59 of specifications

Supply, installation, testing and commissioning of 63A TPN MCBs in existing D.Bs /panels as per clause no.60 of specifications.

Supply, installation, testing and commissioning of 40A TPN MCBs in existing D.Bs /panels as per clause no.61 of specifications.

Supply, installation, testing and commissioning of 20A DP MCBs in existing D.Bs /panels as per clause no.62 of specifications.

Supply, installation, testing and commissioning of 32A TP MCBs in existing D.Bs /panels as per clause no.63 of specifications.

Removing of existing lighting fixtures as per clause no.64 of specifications.

Removing of existing PVC insulated copper/Al. conductor wires of 3 mm to 10 mm dia of 10 meter length as per clause no.65 of specifications..

Removing of existing Cables of sizes 11 mm to 50 mm dia.of 10 meter length as per clause no.66 of specifications.

Removing of existing M.S. or PVC pipes sizes 20 mm to 30 mm dia. of 10 meter length as per clause no.67 of specifications.

Supply, installation, testing and commissioning following FRLS copper conductor multi stranded 3 C x 1.5 sq.mm copper conductor PVC insulated unarmoured TRS cable as per clause no.68 of specification.

Supply, installation, testing and commissioning following FRLS copper conductor multi stranded 4 C x 2.5 sq.mm copper conductor PVC insulated unarmoured TRS cable as per clause no.69 of specification .

Supply, installation, testing and commissioning following FRLS copper conductor multi stranded 4 C x 4 sq.mm copper conductor PVC insulated unarmoured TRS cable as per clause no.70 of specification

End terminations of 4C x 16 sq. mm PVC insulated copper/aluminium conductor cable with long barrel coppwe lugs as per clause no.71 of specifications.

End terminations of 4C x 10 sq. mm PVC insulated copper/Aluminium conductor cable with long barrel coppwe lugs as per clause no.72 of specifications.

Supply and installation of 1 C x 1.5 sq.mm FRLS insulated copper conductor wires in existing conduits / channels etc. as per clause no. 73 of specifications.

Supply and installation of 2.5 sq.mm FRLS insulated copper conductor wires in existing conduits / channels etc. as per clause no. 74 of specifications.

Supply and installation of M.S. supports as per clause no. 75 of specifications.

Supply and installation of M.S. box as per clause no.76 of specification

Supply and installation of 2 nos. 5A switches with suitable box and modular plate as per clause no.77 of specifications.

Supply and installation of 1no. 15A switches with 1 no 15 amp socket suitable 3modular box and plate as per clause no.78 of specifications.

Supply and installation of 4 nos. 5A switches with 4 module plate modular with suitable box and modular plate as per clause no.79 of specifications.

Supply and installation of 6 nos. 5A switches with 6 module plate modular with suitable box and modular plate as per clause no.80 of specifications.

Supply and installation of 8nos 5A switches 8 Module surface/recessed type M.S. box, and modular plate as per clause no.81 of specifications.

Supply and installation of 2 nos 5A switches & 2 A sockets and tops and 1 no.15A switch & 1 no. 15 A socket and top, blank plate with suitable ( 12 Module) surface/recessed type M.S. box,(modular switches & sockets) and modular plate as per clause no.82 of specifications.

Supply and installation of 1 nos 5A switches & 2 A sockets and 1 no.15A switch & 1 no. 15 A socket and top, blank plate with suitable ( 8 Module) surface/recessed type M.S.box, (modular switches & sockets) and modular plate as per clause no.83 of specifications.

Supply and installation of 3 nos. 5A switches with suitable 3 modulebox and modular plate as per clause no.84 of specifications.

Supply and installation of 1 nos. 5A switches with suitable box and modular plate as per clause no.85 of specifications.

Supply and installation of 160 mmDLP trunking with all accessories ( includes 1No 5A, 1 No 15A switch, 1No 15A Socket, 1No 5A socket, 1No LAN point per 2Mtr length)as per clause no.86 of specifications.

Konkan Electric Corpn NM